PC logons required when it is not shut down.

My PC is for home use only & I am the only user so security is not a concern. When I let it set idle for a few minutes when I return I have to sign on. How can I eliminate this very irritating condition? I do have it set up so I don't have to logon after being in 'sleep' mode. It only occurs when I leave the screen up and running.
This question was solved.
View Solution.

Hi,
Right click on an empty area of the Desktop and select Personalize. Click the Screen saver link in the bottom right. In the following window remove the tick from the box next to 'On resume, display log-on screen'. Click Apply, then Ok to save the setting change.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Hangouts causes Chromium/Chrome to not shut down properly

Every time I run Chromium or Chrome after logging in, I get an error saying that the program did not shut down properly, and it asks if I would like to restore the windows that were loaded when it did not shut down properly (even though I shut the app down like normal every time). I have narrowed this down to an extension issue, and the problem only being with Hangouts. If I disable the official Hangouts plugin, the problem stops, but enabling it again will cause the problem to start again. I only get this error if I log out of my user account and log back in, or if I reboot my computer. It actually doesn't seem to cause any functional problem, it's just a bit annoying.

@gnunn thanks a lot, that is actually what I was looking for. Temp fix anyway.
Pse wrote:
bulletmark wrote:
This is a bug that has existed with Chrome and Arch for about the last 3 months. Not sure if the bug is within Chrome or GNOME. I just press that Restore button every time but it is damn ugly.
PS Edit: I just remembered somebody, possibly on this forum, suggesting the problem was within systemd or gdm not waiting long enough for Chrome to shut down.
I don't think that's the case here. The OP said he has the problem even when closing Chromium manually.
FWIW, I'm on Gnome 3 and I can confirm that closing the browser using Ctrl+Shift+Q works (i.e. no "restore" option afterwards, all tabs automatically restored) but shutting down Gnome without closing Chromium first causes the "restore" option to appear next time.
Still, Gnome does not close it properly, although disabling the Chrome/ium background operations will fix the problem, it won't address the problem on its own.
I wonder if this is stuff that Gnome devels need to be aware of.

HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.

HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs

HT1277 my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to  > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook

I use uTorrent but it will not shut down when i quit

I use uTorrent but it will not shut down when I quit

Any torrent program will and can destroy your computer.
You are not the first and will not be the last to learn this.
UnInstall and if your machine is capable Repair Permissions and shut your computer clear off, this allows it to reset and then restart your computer. Be wary of anything you get from a torrent. Movie, Music, game, EVERYTHING.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

My phone froze and will not shut down when I updated the iphone

my phone froze and will not shut down when I updated the iphone with the new software
<Re-Titled By Host>

Hi there bebe_meza,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
-Griff W.

Why does my iMac not shut down when I try to shut it down?

Wh does my iMac not shut down, or restart when I try to do either. It just sits there with the little loading circle continuously moving. The only way I can shut it down is if I hold down the power button to shut it down. Can anyone tell me why this is?
Thanks!

Open your Activity Monitor and check to see what is running?
If there is some important Process running, then it is better to wait until it has finished instead of cutting the power and corrupting who knows what?
If there is nothing important running, then follow the instructions in the link below for resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

HT1414 My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down

how come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down, so it means th problem is my iphone5

Hello vina8sy,
After reviewing your post, it sounds like the iPhone will turn off after a sync but the iPad will not. I would recommend that you read this article, it may be able to help the issue.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down.

I have Adobe Premier Elements 7. When I launch the application then try to begin using it an error is presented which advises Sorry, a serious error has occurred that requires Adobe Premier Elements to shut down. We will attempt to save your current project. When I click OK the program shuts down. I have tried fixes I have found on the Forum. I have also uninstalled and reinstalled the program.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Another "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."

When I try an open the original project or a copy of it I get this message.
"Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."
I have tried to create a new project and get the same message.
I have tried uninstalling and reinstalling the program a few times.
The last time I worked on the project I had no issues.
Any suggestions?

Hi
a. Open Premiere Elements 9.0/9.0.1 - Yes, I get the welcome screen (v9.0). I can choose open project, and choose my project. The program will open and show that it is loading the project with the scroll line will show all the way to 100% and will stay there. Sometimes I get the "Sorry" message and sometimes the loading project window just goes away and nothing is loaded and the program stays on the clock until I close it.
b. You can find the Adobe Premiere Elements Prefs file and deletion of it makes no difference to your issue. - Made no difference
c. Have you deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists? If not, please do so. - Done, made no difference
1. Does the problem exist with and without the antivirus and firewall(s) disabled? - Running McAfee Total Access Protection. Turned off firewall and anti virus. It works. As a test I left the anti virus off and tried loading project with and with out the firewall turned on. The project loaded each time. I then tested the firewall on, with and with out antivirus. Antivirus off - project loads each time. Antivirus on - doesn't load and program stays on clock.
I will continue to experiment with it and see what happens. The last time I used it I was running a different McAfee product than no. So it seems to work with the Firewall on and the Antivirus off.

Safari will not shut down

My safari will not shut down. I tried to restart my computer, but since safari will not shut down, neither can the computer. I was using a web-based IEP (teacher program) software that required opening a PDF in Safari when it stopped working. Any help would be great. I also cannot use Safari. It will minimize.
Thanks!

Force quit Safari.
Command + Option + Esc
Or click Force Quit from your Apple  drop down menu.
Or, you can force quit apps using the Activity Monitor located in HD > Applications > Utilities

PC logons required when it is not shut down.

Similar Messages

Maybe you are looking for