Pc/mac internet problem

ok, i got a macbook a couple days ago and am still having trouble with internet. I discovered last night that I need to call my isp in order to make my house/network wireless so my macbook will work wirelessly.
my problem is I have a desktop pc with a motorola cable modem with the cable that looks like a telephone line going in at the top and then the other end goes into the back of the tower that says ethernet. I tryed unplugging the other end of the cable that goes into the tower into my macbook, and left the other end plugged into the modem. still no internet. what do I do?? what needs to be set in network preferences on my mac or pc for this to work?
hope this made sense!
thanks!

It's quite possible that your ISP is assigning you a static IP that needs to be entered into your computer (Mac) in order to get connected. How comfortable do you feel navigating the network preferences of your PC? XP or Vista?
If you're going to have multiple computers connected at home then I'd strongly recommend you consider purchasing a router. This allows you to connect multiple computers (PC or Mac) to your home network without swapping cables.

Similar Messages

  • Mac Internet problems

    I have a 2013 15 inch Macbook Pro with i7 2.2 GHZ. When I start the computer in windows, it shows that there are no networks availiable. After troubleshooting, it told me to plug an Ethernet cable into the computer. However, my router is wireless. The internet is running fine when i boot up into OSX. Help plz?

    When I start the computer in windows
    Boot Camp partition?
    Try plugging into the router using an Ethernet cable. Normally, there are ports for that. That will allow you to test connectivity.

  • Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

    I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
    I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
    The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
    After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
    Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
    You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
    O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
    You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
    I hope someone is ably to help me ?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Internet Problems: Websites are not loaded

    Hi everyone,
    since the Mavericks-Update I got some problems with my Internet-Connection:
    1. Often the websites are not loaded. There comes no error-page or something else, its just a white page and I can see the Browser is loading but nothing happens. After refreshing the page, the page often loads correctly.
    2. Connection to messengers in the browser get lost. I open Facebook or Google  and often the connection to the chatsystem gets lost after a few seconds/minutes.
    The problem comes up with any Internet-Conection(WiFi and Ethernet) and on every browser (Safari, Chrome, Firefox) in every network.
    ping of google.com -> lost no packages! -> Internetconnection is stabile.
    Other Notebooks are running without problems in the same network. Who can help?

    Hello,
    I think I solved the problem:
    Try this:
    1. SystemProperties-> iCloud-> disable documents
    2. Open Finder -> "Gehe zu" (go to) -> press alt -> Library -> Search Cache -> Take the Cache and drop to Desktop.
    3. Restart your Mac -> During the start press cmd+alt+p+r and hold it down. Now the startsound appears 3 times. After three times you can stop pressing the keys. -> Mac starts -> Problem should be solved.
    If you are shure the problem is solved, you can delete the Cache frome the Desktop.

  • Game froze my MacBook Pro, now I have internet problems-What should I do?

    Hi,
    I recently bought a game to play on my macbook pro, it is Sims Castaway Stories for Mac by Aspyr.
    My laptop meets/exceeds the requirements to play it.  It only uses little ram and hardrive space.
    I installed it a few days ago, my laptop started to get really worked up 30-60 mins into playing the game.  My laptop was making A LOT of noise and got pretty hot, I could hear that it was making a lot of effort to ventilate the heat out and to keep my laptop cool.
    About 5 hours into playing the game My laptop completely froze and I had to force shut it down and restart.
    Everything seemed fine when I restarted it.  I played the game the next few days and it ran fine for over 5 hours.  However my laptop is still very hot and noisy every time I play the game, and even when I don't have the game open, but just the disc in.
    When I have the game running and go on the internet the videos I watch are distorted, images are fragmented + oddly colored, pages load in computer code, and pages won't load occasionally.
    I have the same problems with my internet when the game disc is not in my laptop. (disc out= no super hot and hyperventilating laptop problems)
    I have even uninstalled the game completely and the internet problems are still there.
    I use google chrome, but I have the same problems on safari.
    My home windows pc has the same internet problems as well, my second windows pc does not.
    Is this a bad internet connection problem or has this game damaged my laptop?
    What should I do?

    The Internet is sent to you in packets with an error-detection code on them. Ones that come through with errors are rejected. Distortions and problems with display are caused by problems on your computer itself, not by bad data from the Internet.
    Most games, including ones tied to the Internet, work your computer very hard. It will get hot. When it starts to get hot, the fans will go on high. Putting the DVD in the drive makes a motor spin it up and that causes heat as well.
    Do you have enough RAM memory to support all the things you are doing at once? If not, your Hard drive will be on all the time to do Paging to simulate more RAM memory, and spinning its motor all the time will make your Mac really Hot.
    To cool the underside by convection, at least 3/4 inch (20mm) space is needed underneath. A smaller space is not effective.

  • Sharing Mac internet with XP via Ethernet

    Hi
    I'm having problems sharing a MAC internet connection with windows
    I've done, successfully:
    Internet <--> XP <--> MAC
    but now I want to do:
    Internet <--> MAC <--> XP
    Is there a simple guide somewhere?

    On the PC in a browser try http://17.254.0.91
    Doesn't find the MAC site - hangs
    How is the Mac connecting to the internet (ethernet
    for example), how are you trying to share it (airport
    for example).
    Mac connects USB Speedtouch USB ADSL modem
    Sharing via ethernet connection 192.168.2.1 255.255.255.0 - firewalled
    Firewall on MAC and XP switched on - even with XP Fw switched off it doesn't work. XP = 192.168.2.2 via Gateway of 198.168.2.1 255.255.255.0

  • Help! Strange Internet problems!?

    We just got weird internet problems! Very annoying! I'm writing from iPhone now!
    Facts:
    -Starting today, both our Macs started having problems accessing only SOME parts of Internet ?! E.g: Can access google, but NOT gmail.com from Safari. Can access both from Firefox. Can't access this forum from any browser?!
    -Mail downloads/sends some accounts but not others
    -Tried restarting Macs &amp; modem &amp; router
    - called Time Warner
    - no recent changes to macs
    Any ideas!?

    More weird results.
    It turns out CAN access this forum from Safari browser, but it takes a VERY long time to load.
    I tried our iPad.  I can access this forum fine and it loads right away using same WiFi as laptops?!
    I still can't access gmail.com from Macs or iPad, but can access it just fine from iPhone (via AT&T, not home network.)  Errors:  Opera says "Session closed by remote server".  Safari on iPad says " server stopped responding".  Safari on Macs says "can't open ... because server isn't responding"
    MOST urls load fine and super fast.  Only a few don't load at all (e.g: gmail.com) via home network.  Others load fine on iPad on home network but VERY slow on Macs (e.g. this forum)?!   Everything seems to work fine from iPhone using AT&T network.
    I'm really confused?!

  • All Kinds Of Internet Problems - PLEASE HELP!

    So I've been having all kinds of internet problems in my house. I'm almost positive part of it is router related but I just (somewhat scientifically) proved it's also related to my mini. I used speedtest.net to test both my brand new mac mini and my 2006 macbook pro running Leopard 10.5.1 (fresh install). Here's the specs and speed test results:
    _*2006 Macbook Pro*_
    Intel Core Duo 2.0GHz, 2GB RAM
    OSX 10.5.1
    *Average Results:*
    Download - 4.72 Mb/s
    Upload - 0.84 Mb/s
    Ping - 24-38ms (range)
    _*2009 Mac Mini*_
    Intel Core 2 Duo 2.53GHz, 4GB RAM
    OSX 10.6.2
    Results:
    Download - 0.78Mb/s
    Upload - 0.97Mb/s
    Ping - 15ms
    *AFTER PRAM RESET:*
    DL - 2.85Mb/s
    UL - 0.98 Mb/s
    Ping 22ms
    *these were the BEST results and far above the average I got
    Router:
    Netgear WGR614v9 running latest firmware
    WEP 128bit security B/G combined broadcast
    We were running WPA2 security but when I switched to WEP everyone in the house noticed a speed increase.
    The tests were run within a span of 10 minutes and both computers were about 2 feet away from each other.
    Can someone please explain to me why my nearly 4 year old MBP with an outdated OSX is spanking my brand new mini?

    I apologize ahead of time as I am not sure I can answer your question, but I would like to ask you a question if I could...
    Are you using your mini with Ethernet cable or Wireless. Not that there's a real difference in your case but sometimes if you're running with a Wired Ethernet cable on a unit that also has wireless, it helps to turn off the wireless.
    And on the other hand if you are not running with Ethernet cable on the mini, you might think about trying that.

  • Slow internet problem on my iMac solved by installing Google Chrome browser

    Slow internet problem on my iMac solved by installing Google Chrome. My daughter came with her macbook pro loaded with OSX 10.6.8 but running Chrome and she could open all my problem websites instantly. So fault was in Safari. Thanks for all your help.  My original post has disappeared

    Original post is at:
    All of my pre 2012 macs extremely slow to load web pages but my son's 2014 mac and my iphone and ipad 2 load same sites instantly

  • Major Internet Problems

    I've had slow internet problems since I first bought the CPU back in February, but I chalked it up to a crappy Linksys wireless router. I would constantly have to click on the Airport logo and select the network during use to speed up page loading. It would never drop the connection, but as soon as I clicked on the logo, the stalled page would suddenly load a lot quicker, but only for a few moments.
    Then I moved to a new apartment with a T1 connection and bought a new Airport Express "n" router... still the same problems! Its even slower now (I think) and it will stop downloading/uploading often (even the 10.5.5 update). I even tried running a hard wire directly into my machine, and its still unbelievably slow... I stalled on multiple attempts to upload photos to facebook last night, and I'm fed up!
    This is my first Mac, so I'm stuggling with fixing the issue. I bought this thing so I wouldn't have to deal with problems like this... someone help!

    I've had slow internet problems since I first bought the CPU back in February, but I chalked it up to a crappy Linksys wireless router. I would constantly have to click on the Airport logo and select the network during use to speed up page loading. It would never drop the connection, but as soon as I clicked on the logo, the stalled page would suddenly load a lot quicker, but only for a few moments.
    Then I moved to a new apartment with a T1 connection and bought a new Airport Express "n" router... still the same problems! Its even slower now (I think) and it will stop downloading/uploading often (even the 10.5.5 update). I even tried running a hard wire directly into my machine, and its still unbelievably slow... I stalled on multiple attempts to upload photos to facebook last night, and I'm fed up!
    This is my first Mac, so I'm stuggling with fixing the issue. I bought this thing so I wouldn't have to deal with problems like this... someone help!

  • New Update didn't fix the "You're Not Connected to the Internet" problem.

    So I downloaded the new Front Row update yesterday, hoping the "Your Computer is not connected to the internet" problem for the iMac would be resolved, but no dice. Still says that when I try and view trailers. The only fix I've found is to create a new internet login manually that exactly mimics the "automatic" setting. However, when I do that I lose my video iChat capabilities. There's gotta be a way to have my cake and eat it too. Anyone else having this issue? Anyone find a fix? Anyone have any suggestions?

    Sorry, I have an iMac and it is a mid 2011 model. I have 231 gb free. 2.5 GHz Intel Core i5, 4 GB 1333 MHz DDR3, Mac OS X Lion 10.7.5 (11G63)
    Yes my data is backed up. I installed the latest iTunes and now the program opens and immediately becomes unresponsive. The reason I tried to install the latest version was because it stopped connecting to the radio and to the store. I thought maybe the software update option was somehow related since they were both telling me I was not connected to the internet. Disabling the firewall doesn't make any difference, either, for the record.
    Thanks again.

  • Internet problems on my macbook pro and ipod touch with camera.

    Hi,
    For the last week or so I have been experiencing internet problems with my macbook and iPod touch with camera. I'll be online and clicking different news articles and suddenly the address bar will start to open a link but will not complete it. So what I do is go up to the signal bar and click turn off airport then turn it back on and that will temporarily solve the problem. Same solution on my iPod, I turn off the wifi and turn it back on. It is very frustrating for both devices. I will include as much info as possible. I have a NetGear RangeMax wireless router model WPN824v3. I was wondering if changing the wireless settings on that would solve my problem. I have the channel on 9. Mode on b and g. Security option on WPA-PSK [TKIP] with password. I would be happy for any help with this issue. Also I hope I'm following correct posting protocol. I haven't been on this forum in a while.

    Sig,
    Thanks for the advice. I finally tried a solution after doing nothing. LoL. What I did do was change the channel the router was on from 9 to 7. I think I've done something like this in the past when I had slow internet and that worked out well too. I thought that would help and so far so good. Not an interruption so far but we shall see. To the guy or girl who expressed that they had the same problem as me I would try changing the channel of your router like I did. I will monitor the situation and see if it totally solved my problem or not and keep this thread updated. Thanks people

  • Applet in Apple Mac OSX problem

    Hi all,
    have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
    ArrayIndexOutOfBound, 0...
    but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
    also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
    lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
    _______________________________FireFox_____Safari_____IE
    _______________________________Win | Mac_____Mac____Win
    1. load applet for 1st time___________OK_|_NO_____FAIL____OK
    2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
    3. when applet button click (security)___OK_|_NO_____-_______OK
    p/s: all above test was using same applet with same parameter and value.
    below is the sample i capture from Apple Mac just now:
    http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
    Message was edited by:
    ahbeng78

    i has a loading problem saying that
    init failed to load ArrayList as error message
    said:
    ArrayIndexOutOfBound, 0...Well, post the stack trace.
    but when i debug print out the ArrayList content and
    its length, i'm sure that this ArrayList is NOT NULL
    and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
    try it in Mac, it show only a part of applet without
    any error, but when i try to refresh the page, applet
    is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
    lastly, when a button of an applet being click and
    this will bring a new window with some parameters
    value, its work on IE in Windows platform, why it
    won't work for FireFox or Safari for Mac? i see
    prompt out saying is security problem, is there any
    workout of this? thanks. to summary out of junk
    above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
    Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.

  • I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

    It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
    --JaySwanny

    User Password Reset

  • I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    Well, how have to determined no signal is being recieved to your mac?
    Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
    I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
    I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
    Otherwise, if you just want to get this working we can have a look a bit deeper.
    And driver? OS X driver?

Maybe you are looking for

  • Adding fields into DSO in the Key Fields

    Hello Experts, I am using a Cube which loads data from DSO. Now, for some requirement I have to add one field into DSO in the key  fields Part. But DSO already has 16 fields which I cannot remove. So how can I add one more field into DSO in this case

  • Runtime error while doing FB08

    while doing FB08 the system is creating a dump. Runtime errors         SYNTAX_ERROR                                                              Occurred on     05.08.2008 at   12:43:14                                                                 

  • What does AT END OF do in a loop

    Hi all, can you please tell me what is the meaning of AT END of in this loop.  I know it is calculating summation  of a values in the structure XTAB4, but I am not able to understand why is CHARG specified. Can anyone please help me. LOOP AT XTAB4.  

  • Not Displaying List when called in subscreen

    Hi all   My program is not showing the output screen(list) when it is called from the subscreen, it is returing back to the subscreen. Following is the program flow. 1. I have a normal selection screen and a selection subscree. SELECTION-SCREEN BEGIN

  • Adobe Acrobat XI Pro Context Menu is missing Windows 8

    Hi there, I've just installed acrobat XI and I found that the context menu (convert to pdf, combine files...) is missing. Does anyone know how to put it back? Cheers!