PC networking to iMac booted in Vista, and in vista emulation-Small office

Re: Wireless and Wired Network: probably using a dlink 825 dual n band wireless router.
1. How is a typical Dell/ vistax64 networked to an imac booted in vista x64?
2. How is a typical Dell/ vistax64 networked to an imac running vista x64 in emulation?
*3. how are they configured to simultaneously synch business files and digital images, that will originate from the dell, in situation 1 & 2 above?
I (might be) stuck getting a Dell/vista 64 to acquire digital dental x-rays in the treatment room, bec the sensor mfg'er says the drivers won't work(!) on a Mac booted in Vista, either way. But since the PC imaging app and PC practice management software works fine either way, the iMac will rule the Front Desk. I'm still not convinced about the driver PC only spec! ..... Please help me get the sync'ed networking configured. Thanks!

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Specifically what is the model number for the printer? If you have difficulty locating the model number please use one of these guides to get it:
Deskjets
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c01105883&...
Envy Series
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c01105892&...
LaserJets
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c01230412&...
Officejets
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=buu04090&l...
Photosmarts
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c01105892&...
PSC
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=buu04090&l...
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Network between imac 10.7.5 and imac 10.5.8

We've got a pair of imacs here at the office. The "new" one is a 2,7 i5 running Lion 10.7.5 and the older is a 2,66 intel core 2 duo with Leopard 10.5.8.
We can access - on our gigabit ethernet - the newer imac from the old one, but not the opposite.
Can someone help us on this?

You will need to upgrade OS X on the older computer to have two-way file sharing. Start by seeing the following. You should begin the process by first buying and installing Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Imac boots with folder and question mark

I have been getting messages about a corrupt index on Mail. Although I followed the instructions to rebuild nothing seems to have changed.
I now have a situation whereby on reboot I get a folder with a flashing question mark or just a white screen.
I have tried to reboot from a snow lion disc I have; it spins up but I just get a white screen.
Is the HD faulty?
Is there any way I can boot to check status. I read about holding down the option key or CMD+R but this does not appear to have any impact.

I have been getting messages about a corrupt index on Mail. Although I followed the instructions to rebuild nothing seems to have changed.
I now have a situation whereby on reboot I get a folder with a flashing question mark or just a white screen.
I have tried to reboot from a snow lion disc I have; it spins up but I just get a white screen.
Is the HD faulty?
Is there any way I can boot to check status. I read about holding down the option key or CMD+R but this does not appear to have any impact.

Sync'ed Lan: Dell-vista 64 & iMac booted in vista, or running in emulation

I'll be using a dlink dual n band 825 wired/wireless router. How is a wired & wireless file sharing and sync'ed file sharing LAN configured? Thanks.

Will this solution work for the Palm Treo 755p?
Post relates to: Treo 755p (Sprint)

My iMac boots up and the mouse curser will move but nothing responds to the click. I was in the Apple store today and they reset the permissions, but still same problem. Help!!!

My iMac boots up fine and the mouse appears to be working fine however nothing responds to the mouse click. I took it to the Apple store today and they checked and repaired the permissions. I brought it home and still have the same problem. Does anyone have any ideas?

Hi, thanks for trying to help!
I just blew out the dust and turned it on again to the same problem.
So I tried holding the shift key which did something but then on reboot I got the same problem but this time worse, see here...
So I tried the alt key but that just gave me two startup disk options, both of which didn't work (they led to the same problem).
Then I tried CMD+s and followed your instructions, see below...
I just held the power button down and turned it on again and the same problem happened again.
Any further thoughts?
Thanks!
Alex

Given wireless range of Time Capsule is 150', will this work? Put DSL modem on phone line in garage, connect ethernet to small office bldg (125') and connect separate ethernet to main house (200'). Time capsule on each end (or Airport Express)? Thx

Given Time Capsule wireless range is 150', will this solution work? In detached garage, connect DSL modem to phone line, then connect ethernet cable to DSL modem and run 125' to small office bldg. Connect separate ethernet cable to DSL modem and run 200' to main house. Put time capsule or Airport Express in each bldg resulting in separate wireless networks in each? Thanks.

This will work very well. You can run a CAT5e (or CAT6) Ethernet cable up to 330 feet...or 100 meters...with virtually no signal loss.
CAT6 costs a bit more, but will handle next generation Ethernet speeds, so if you have a choice, suggest that you opt for CAT6 cabling.

Backup a dual boot iMac with OSX + Vista to Time capsule and USB hard drive

I have just bought a Time Capsule which is now working as my WiFi Network base station and backs up an iMac and a Macbook. The iMac has both OSX and Vista (using Boot Camp) and I was using a USB Hard Drive that has 2 partitions (HFS+ for the Mac; NTFS for Vista) to back up the iMac. Rather than leave this attached to the iMac just to back up the Vista partition I would like to move it to the Time Capsule's USB port and use it as NAS. The idea being that it becomes a NAS with one partition used to back up the Windows data when I run the iMac with Vista and the other partition to archive the Time Machine backups from both the iMac and Macbook. I tried to connect it as it was but got an error and reading the forum it seems that it won't work unless both partitions are HFS+ or FAT. If I reformat the NTFS partition to HFS+ will I be able to use the built in backup function of Vista to back up the Vista partition to the USB hard drive? I read somewhere else that Time Capsule takes care of the formatting for an external NAS drive and Windows will be able to read and write to it even though it's not NTFS. Any ideas comments appreciated.

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

Imac\bootcamp only boots in vista

Hi
My intel based imac suddenly only boots in VISTA mode
Tried holding command key to get option for mac os.. nothing but boot into vista mode
also no sound while in windows
HELP
I even tried putting in disk and reboot

Put in the original DVD that came with your iMac and restart your computer by holding down the "C" key, once it has restarted go into utilities and repair your Mac hard drive, then select startup disk from the same menu and then restart your iMac.

My 2008 iMac will get to the white boot up screen and has the loading circle and then it will freeze. And will freeze when attempting to boot recovery or bootable disc of Mavericks

Hi there, I have a 2008 iMac 24' 3.06 Intel Duo with 4gb ram. And yesterday it was working totally fine and jolly with no issues. Then I noticed there was an OS X update for Mavericks, so I finally decided to do it, and once it was rebooted it went to like the grey screen and I could move my mouse, just nothing else was there. So I tried to restart it, and then it booted up, but was really laggy, and so I decided to restart it and try again, this time the iMac froze at the login. So I decided to take it apart, pull the 500gb hard drive, connect it to my MacBook Pro, and then formatted it in Disc Utility. From there, I opened the Mavericks installer on my MacBook and then installed it to the iMac's hard drive via usb hard drive enclosement. And once the install of Mavericks was completed, I put the hard drive back into the iMac and tried to boot it. It now boots up to the white screen with the Apple and the loading circle underneath the Apple and then it freezes and doesn't go any further. So then once that happened, I turned it off and tried to boot it into recovery mode. Then it freezes on the screen with the Apple and loading circle below it. Then out of desperation, tried to use a bootable disc of Mavericks to see if i can at least get the iMac to boot up again, with no success. It froze at the same point again. So now I reach out to the Apple Community to see if anyone else has an idea on what I can do or if anyone had this issue and what they did to resolve it. Any help would be great. Thanks.

mddcfilms and Pat75, I'm having precisely this same issue -- no booting but spinning and freezing gear under the Apple logo. Have either of you come to a resolution? Here are my details:
iMac, Early 2008, 24”, 3.06 GHz, 4GB
September 2013: Nvidia GeForce 8800 GS GPU repaired, HDD replaced with Western Digital 2TB
21 April 2014: Erased HDD with Disk Utility on Mavericks USB; clean installation of Mavericks from the USB. Process completed without issue, including registration process. After a minute or two of poking around, machine shut down immediately (not through the shut-down process).
Since then it will not boot up. Grey screen and Apple logo appear, with gear spinning; the gear freezes, then the machine tries to boot up again. Occasionally I’ll hear “To use English for the main language, press the return key.”
I’ve tried booting into Safe Mode; same gear freeze and restart.
I’ve tried booting to the 10.9 Recovery disk; same gear freeze and restart.
Tried booting from Mavericks USB; same freeze and restart.
Tried booting from 10.6.3 DVD; same freeze and restart.
Ran Apple Service Toolkit (at Stormfront in the UK), which turned up nothing in error.
Started in single-user mode to test HDD and RAM, which are fine.
Started in verbose mode to check logs; some error messages but nothing seems crucial. After the log screen, the grey screen and Apple logo appear, gear spins, and then freeze.
Cannot get to Apple Hardware Test (vintage machine too old?)
Cannot get to Target Disk Mode with my MacBook Pro
Ideas: Potential booting flaw in Mavericks installation. Firmware incompatibility with Mavericks. Hardware issue in Nvidia GPU (known for problems). At the moment I'm hoping that it's a Mavericks installation or firmware issue, though I suspect the Nvidia GPU has blown up on me. These graphics cards are known for being pieces of junk, so I may try installing the lower spec ATI Radeon 2600 GPU if I can find one at a reasonable price.
Anybody else have precisely these problems or have any advice?

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

IMac G5 won't boot in normal and safe mode, but will from single-user mode

Hello everyone,
I'm quite new here, so I try to do my best if you have a question.
Yesterday, someone nearby me had a iMac G5 (Powermac8,1), and he sayd, that the computer sometimes will boot, sometimes not.
I did test it, I thought it was running fine, but when I played some music in iTunes, it was stuck on 9 seconds, and crashed (with a kernel panic). The guy also sayd, that there was nothing important on the computer, so a clean install was fine.
Now, the problem is, that it will not boot in normal mode (without anything pressed on boot), also it won't in safe mode (shift-boot), but it will, when I enter single-user mode, mount the hard drive and exit from single-user mode so it will go futher on booting. Sometimes it will not, and immediately gives you a kernel panic in single-user mode, but it will 90 percent of the time.
Then you've got another problem: when it's running in the normal desktop from single-user mode, it'll be stuck after some time again. If I look into the Kernel Panic file created, most times it's because of Spotlight indexing, so I disabled that.
He also gave me the disks (Apple Hardware Test and Extra Applications, and iMac G5 Mac OS X Install Disks 1-3) that came with the Mac. He sayd that I could use them, but I think he didn't test out the SuperDrive, because when I insert a disk, it will try to read, but it will make 2 same sounds, and quits after 10 tries, when it will spit the cd out. Also normal (audio) disks.
Also, I must hurry with the commands for mounting and exiting in single-user mode, or it will just not boot.
In all cases, after 30-45 seconds from pressing the power button, the fan will start blowing at full speed, and it will stop after the exit command in Single-user mode. That's weird.
I can't do anything with the SuperDrive, I can't normally boot in Mac OS X except for Single-user mode (but I don't think he would like to do that every time the computer boots up), and I have very limited time when Mac OS X arrived on the desktop.
When booting in Verbose mode, it will be stuck on this:
AppleSMU::PMU vers = 0x000d004c, SPU vers = 0x15, SDB vers = 0x01,
(and sometimes ends with a kernel crash by fsck_hfs)
Things I've tried (without any success):
- /sbin/fsck -fy (in single-user mode)
- Disabling Spotlight and mds
If you want some more information, feel free to ask!
Greetings
-MrYoranimo
PS: My main language is Dutch, so my English can be bad at some points.

Thank you for your support! This reply is a little bit late, because I was to the camping this weekend.
The only thing I sure do know, is that the iMac has a bad SuperDrive. That's one problem, but I don't really wanna use it, and you fix everything by Single-user mode and when I get to the desktop to test things and change stuff in the Preference Panes.
What also came to my mind was that there also is a problem with the videocard (driver), because sometimes when I boot into Single-user mode, I can see some white pixels which aren't supposed to be there. And when booting from SUM you can see that some of the colors are different and there are weird patterns on the screen.
I also tried to setup a NetBoot server on this computer (MacBook Mid 2010) with just Lion 10.7.4 on it, but I'm not that expert and I didn't really find the good posts on the Internet, although I tried it with the Server applications and both Server applications and DeployStudio. But I didn't succeed.
I don't really like buying a new FireWire hard disk or external FireWire dvd reader/writer, except if it has USB support, because my MacBook doesn't support FireWire, and I really wanna make use of it then.
If I know more or have fixed it, I will surely post again here with what I did to fix it (if no one else has posted here already ).

Imac has white screen and spinning wheel and will not boot up---after lion install

imac has white screen and spinning wheel and will not boot up---after lion install

Please read Gray screen appears during startup.

IMac 2008, Boot Camp 5, and Windows 7/8 32-bit & 64-bit

I am interested in installing Windows 7 via Boot Camp 5 on my iMac (see sig) but I'm confused as to whether or not my mac is even capable of installing Windows 7 at all. Let me explain.
According to THIS support article, Boot Camp 5 dropped support of Windows 7 32-bit whereas Windows 7 64-bit remains supported alongside the newly supported Windows 8 64-bit. So far, so good. But according to THIS support article (scroll down to "Boot Camp requirements by Mac model" and click on "iMac"), my mac model (iMac 24-inch, Early 2008) only supports Windows 7 32-bit as of Boot Camp 4 and that Windows 7 64-bit and Windows 8 64-bit are not supported for my model. ???? That's the crux of the conundrum I'm facing.
So my question is this: can someone give me a definitive answer as to whether or not my iMac is capable of installing and running Windows 7? What about Windows 8?
My sincere thanks in advance.

The truth is that you can run Windows 7 and Windows 8, in both 32 and 64-bit versions, without any problem (you have a 64-bit processor). The problem is that Apple only supports a 32-bit Windows 7 version for your Mac. Why? Because Apple wanted to drop the Windows 8 support for the computer you are using.
You can see in this page all the Macs compatible with 64-bit Windows editions > http://support.apple.com/kb/HT1846 As you can see, your Mac isn't supported, so you can only install a 32-bit Windows 7 version with Boot Camp if you want to run Windows correctly.
I told you at the beggining that you can install any 32 or 64-bit Windows 7 and Windows 8 versions on your Mac because your iMac meets the requirements for both editions. However, you need the Boot Camp drivers to make Windows run properly, and here's where Apple has dropped a lot of computers, making them unusable if you install a version that Apple clasifies as unsupported. Sad but that's true

My iMac boots up and I login and then I get a white screen. How do I fix this?

My iMac boots up ok. I get to the login screen where I can select which user to login as, however once I've selected a user account (it doesn't appear to matter which one) I then get a white screen.
I don't know where to look to identify my exact operating system as I cannot get to the Apple icon to check About This Mac.
I have booted up in safe mode, recovery mode and done fsck -fy , it all suggests my iMac is ok but I still get the white screen. Does anyone know what I should try next?

Does it boot okay in the Safe Mode and can you access the  menu there to see what OS you are running? While in the Recovery Mode, did you try running Disk Utility Repair Disk and Repair Permissions?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

PC networking to iMac booted in Vista, and in vista emulation-Small office

Similar Messages

Maybe you are looking for