PC pavilion HPE h8-1120it and 500-012el supports SDD sata 3?

hi, I want to know if the motherboard IPISB-CH2 (Chicago) on a PC Pavilion HPE h8-1120it, or motherboard H-Joshua-H61-uATX foxconn (on a PC pavilion 500-012el), support a hard drive SDD 6Gb \ s (SATA3), thanks

Hi: The H61chipset does not according to the chipset specs from Intel... http://www.intel.com/content/www/us/en/chipsets/mainstream-chipsets/h61-express-chipset.html The H67 chipset does according to the chipset specs from Intel... http://www.intel.com/content/www/us/en/chipsets/mainstream-chipsets/h67-express-chipset.html

Similar Messages

Hp pavilion hpe h8-1070uk - cant boot past post screen - help!!!!!!

Hello,
Please help me HP!
I have a hp pavilion hpe h8-1070uk and recently upgraded the boot disk to a SSD and also installed Windows 8 64 pro. The system ran very well indeed.
After a few months of problem free usage, windows update said that Windows 8.1 was ready to install and all I need do is reboot to install it.
I selected to postpone the install for 4 hours and continued worrking away - I then went to bed and when I came back to the computer 6 or 7 hours later - the Win 8.1 install process was 52% completed but had hung...
On power cycling the system, the PC halts at the post delay screen and if I press Escape as the system boots, the screen shows 'start up menu' on the lower right of the screen (the post delay text remains unchanged) and the systems just hangs...
The lights and fan are on
The keyboard num lock key is on
No disk activity is shown (HD led, etc)
There are no errors displayed on screen or beeping sounds made
I have removed all usb devices and the HD (SSD) to see if this would at least allow the machine to boot and show a missing disk\OS message - this had no effect although the post screen does show a keyboard error - on replugging the keyboard (but not the SSD HD) the system still halts at the post screen with no error shown.
If you can please advise what I can do to resolve this problem - I really need to use the computer and can not see how it could have become damaged - Please, please help!!!

SUCCESS - at least for me (after already shopping on Amazon and Ebay for replacement motherboard).
After reading MANY posts about this in various forums, a common theme was removing hardware. I tried that, and as OP had done, at one point I removed everything including cables from MB to front panel USB ports.
What worked was plugging in the old HDD I had cloned from a couple days ago. Yes, this fixed a booting problem at the POST phase. And I was able duplicate the works/doesn't work circumstances repeatedly after that.
If you haven't solved your problem (it's been a month), I would try a different HDD or putting a bootable DVD or attaching a bootable USB drive (of anything). SOMETHING bootable for a confused boot loader to find (I suspect the boot loader on your HDD got corrupted when Win8.1 didn't install completely).
My setup was a Compaq Vision CQ2723w with Win7 and an EFI boot system. Part of the boot loader resides in NVRAM (presumably on the MB). Things worked fine until I got done setting everything up (including booting from F9 boot menu very often) and removed the thumb drive with a bootable Win7 Install on it and rebooted. Based on what I saw later (bcdedit /enum firmware), there are many duplicate boot manager and USB HARD DISK entries. There is even an entry from the Acronis loader used during disk cloning ... and neither disk was plugged in at the time. Hence my belief that boot loader stuff is stored on the MB. (Microsoft Tech blog talked about the firmware version, but didn't mention physical location).
Long story getting longer ...
I suspect
(1) BIOS searches for bootable devices. How else can it present a newly installed boot source (and it lists HDDs by model number) in the boot menu.
(2) the thumb drive was causing "it's" boot manager settings to be first choice in the MB firmware. When I could get into BIOS, I would put the EFI entry for USB HARD DISK after other EFI entries in the boot order. Whenever I booted Win7 Install from the thumb drive, it would be back on top.
(3) when I booted without the thumb drive installed, the overall boot process was "confused" or partially corrupt somewhere (like on the 250 GB Seagate HDD). I would see 6 entries for "Windows Boot Manager" in the F9 boot menu.
(4) When I put in the old 500 GB Seagate HDD, F9 Boot Menu and F10 Setup worked again. Boot Manager would come back with "no system found" and I had to manually select the 500 GB Seagate from the F9 boot menu. Once that happened, the default choice of Boot Manager in the startup menu worked again. Did the HDD load "it's" boot manager settings at the top of the MB firmware????
At the end, with a "working" system, I replaced the HDD with a cloned SSD (the goal at the beginning of this journey), kept the bootable thumb drive in my pocket, booted from the SDD (listed in the F9 boot menu), and repeatedly booted. A quick peek at the boot menu showed one of the Boot Manager(s) to be the default choice.
I still have multiple Boot Managers listed in the F9 Boot Menu. "bcdedit /enum firmware" still shows a display order with four duplicates for <bootmgr> and six of the GUID associated with USB HARD DRIVE. BUT THE SYSTEM BOOTS!!!!
Now, I just have make sure bootable USB drives do not come within 10 feet (and I'm hanging on to the original 500 MB Seagate that "fixes" the problem when its connected.
Hope this helps you or someone/somewhere/sometime to solve their problem or get one step closer to understanding how all this booting crap really works (or doesn't).

Can no longer connect to the internet on my hp pavilion hpe h8-1360t cto desktop.

I recently purchased and setup an HP Pavilion HPE h8-1360t CTO desktop computer with Windows 7.
I have a broadband connection and am able to connect to my wireless network and internet with other computers.
About 3 days ago I loaded Blue Coat K9 web protection and have not been able to connect to the internet since.
I removed K9 and rebooted, but I still can't connect.
I moved the ethernet cable to my old computer, which has K9 on it and I connect to the internet just fine.
Thanks in advance for your help.

Hi
Please find the link given below might help you to resolve your issue.
Resolving Broadband Internet Connection Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Pavilion HPE h8-1230 -- List of compatible graphics cards???

HP Pavilion HPE h8-1230
Windows 7
Service Pack 1
model: h8 1234
Processor: AMD FX 6120-six core Processor 350 GHz
Memory: 10 GB (7.73 Usable)
System type: 64bit
Current Graphics card: Nvidia GeForce GT 610
MotherBoard Description:
Manufacturer's name: Gigabyte
Motherboard name: M3970AM-HP
HP/Compaq name: Angelica2
Power supply: EVGA 500W 80PLUS Certified ATX12V/EPS12V Power Supply 100-W1-0500-KR
Bios version: AMI v8.10 12/3/2012 (the most recent bios version available through HP support)
Link to MotherBoard info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03353629&tmp_task=prodinfoCategory&cc=us&dlc=en...
I am trying to upgrade my graphics card. I recently purchased a Zotac GeForce GTX 760 AMP Edition 2GB GDDR5 PCI Express 3.0 DVI HDMI DisplayPort SLI Ready Graphics ... . I also installed the above mentioned power supply. I installed both and when I went to start the computer, I got the HP logo blue screen with a message saying to press ESC key for start up menu, however the keyboard was unresponsive. I updated the bios to this using this link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-114777-1&cc=us&dlc=en&lc=en...
The hp logo screen changed but that was about it. Using the new card, I could get to the first boot screen, and to the hp logo, but then it would stay stuck on the hp logo. Also if I tried to press f10, ctrl + f or any key, I would just get a black screen and nothing would happen. I've read that this seems to be a common problem with the HPE models and the 700 series cards and have seen no solution. I have already arranged to return the card figuring it's either defective or not compatible with my system.
So after all that, I've tried for the last hour to get a list of compatible graphics cards to upgrade my system, and have not found such a list. I've found lists in the forums for other similar models, but I want to be absolutly sure before I make another purchase and have to go through all this trouble.
Any help would be appreciated and if more info is needed don't hesitate to let me know.

Hi,
There are graphics card solutions posted on this forum. They may be hard ro find but they are psoted. It's good that you checked the BIOS settings in the posted HP links as sometimes they get changed thinking that this will work better. However, in the case for Windows 7 it's just the opposite.
You issue is not a driver problem. Check with the graphics card manufacturer for a remedy. If that particular card is video BIOS enabled for UEFI then you are stuck. You can either return the card or install Windows 8 in UEFI mode.
Another choice would be to try one of the below video cards that run in legacy or UEFI mode.
MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP2311x Goes blank/black when connected to my hp Pavilion HPE

Last month, my monitor started to go blank periodically and with increasing frequency. The system setup is:
Windows 7 Home Premium (64 bit)
GeForce GT 530 video card
8 Gb RAM
Intel Core i7-2600 CPU @ 3.40 GHz
I have:
Cleaned the video card
Upgraded to the lastest GeForce driver
Updated the monitor driver
Factory reset the monitor
Changed the connector wire from DVI to HDMI
Connected another monitor to the HP Pavilion (works fine)
Connected the HP 2311x monitor to my Chromebook using HDMI (works fine)
Connected the monitor to my son's laptop (works fine)
The only time that the monitor goes blank/black periodically is when it is connected to the HP Pavilion HPE. A new monitor may solve the problem but as the monitor works with other computers I do not think that it is dead yet.
From the actions of the monitor it seems to switch off and then back on again.
Any ideas as to what to do to fix the issue?

Hello @phil1001,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor goes black when connected to your desktop computer, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Monitor or TV is Blank after Starting the Computer. This should help return the video display to your desktop computer through the monitor.
If the issue persists after completing all of the steps indicated in the resource above, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hp Pavilion HPE PC H8-1214 won't boot up after installing a Western Digital External hard drive

I just recently installed a 3TB Western Digital External hard drive to use for backing up photos and since then I am now having problems with my computer.
I will turn the computer on, but nothing happens. The power button lights up, but the small stack of CD's that would normally light up on the front, while it is powering on, does not light up. My monitor screen just stays blank and nothing happens.
If I turn off the desktop and unplug the external hard drive from the USB, let the the PC sit for 30 sec to 1 minute and then power it back on, it works properly.
PC is an HP Pavilion HPE PC h8-1214
Product #: qw701aa#aba
Running Windows 7
Any advice would be greatly appreciated.

Thank you for your reply. I'll answer one at a time:
During these times when the computer seems to turn on but doesn't load Windows, do you get any type of image or error on the screen? Nothing appears on the screen at the time of boot. I don't even see the 'HP' logo or BIOS prompt.
Have you tried switching the power cable or testing the power cable in a different wall outlet (especially if it is plugged into a power strip, try it directly plugged into the wall). Yes I've plugged it into multiple outlets with and without surge protection with multiple power cables. The power supply doesn't seem to be the issue as it engages all fans etc.
If you've tried a known good power adapter in a known good outlet, it may be an issue with the power supply or a loose connection inside the computer (RAM, power, video card). I've re-seated all components, cables etc to no avail. I'm reasonably experienced in IT support and have never experienced an intermittent problem such as this.
The PC has been plugged in since I made my original post on 02/23/13. Each day I've powered it up to see if it would boot and had been unsuccessful. This evening, I walked by and hit the power button and instantly the drive 'disk' lights lit up, keyboard and mouse lit up, and it booted successfully (after 10 days of no luck). Now I'm afraid to shut it down b/c I never know when it will boot again. There are no system errors and it's running without any issues - until I shut it down again. The IT support guru's at my place of employment feel like it may be an issue with the motherboard since I don't see a bios prompt when this issue occurs. The unfortunate part is that I bought this re-furbished and the HP 90 warranty has expired...
Any further advice or troubleshooting assistance would be greatly appreciated!!

HP Pavilion HPE with beats audio

HP Pavilion HPE
Beats Audio System
Windows 7 Ultimate
12Gb Mem
i7x8 processor
Two questions:
what makes this machine "beats audio"? I just have regular speakers hooked up? (I didn't buy this computer for me.)
Secondly - the original hard drive was replaced due to failure and a temporary drive installed. what is a recommended setup with one regular drive but fast (1Tb is plenty of room).
Thanks.

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the side, back, or bottom of your computer.
Beats Audio is nothing more than Beats tailored hardware paired with Beats Audio software.
The recommended setup is what was original installed in the computer and the use of your HP Recovery Discs to return hcomputer to a factory like state.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

USB 3 adapter for Pavilion HPE computer

I am trying to find a plug-in adapter for USB 3 for a computer, Pavilion HPE, using Windows 7 Ultimate. I have tried two manufacturers, and they do not work. Any suggestions?

Hi
Can you help me with Product number & the complete model number off you unit. Please find the Link given Here how to find the details. So i can provide the link to download the driver.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Sound suddenly stopped working for HP Pavilion HPE h8xt

It was working perfectly fine a few weeks ago; then last week it stopped working and I haven't gotten it to play any sound since. I'm using my old Emachines SP-20A speakers. I tried my headphones to make sure it wasn't a speaker problem, but no sound from there either. I didn't make any changes I can think of.
I have already tried everything on this list, to no avail: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01884922&tmp_track_link=ot_faqs/top_issues/en_u...
There are no error messages, nothing. Everything seems to be fine, but...
I have a HP Pavilion HPE h8-1070t CTO Desktop PC and am running Windows 7 64-bit.
I'm really at a loss here and I can't work without sound. Help would be very much appreciated!

Hi,
It would be helpful if you posted the exact HP product number.
Think back to when your PC operated correctly and then when the sound failed. Between those times, what changes or updates were made to your PC?
You might look in the Control Panel --> Programs and features and look at the changes about the time when your sound failed. In that same Control Panel --> Programs and features you can also look at installed updates and dates.
Your PC is still under warranty so you might give HP Support a try. You already probably know what they are going to tell you.
HP's support number is 800-474-6836 or 800-HPINVENT or online here.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion HPE h8-1220t Desktop PC stuck at blue screen of startup HP

Hi there,
My newly bought desktop computer HP Pavilion HPE h8-1220t Desktop PC sometime stuck at the start up of the computer and nothing happens after that. It stuck at the blue HP screen and I cannot even press esc key or f12 and can't do anything at all. I have to hard reset the computer and restart again THEN it still stuck at that blue screen. Last time I have do hard reset 15 times to boot up. It is getting really annoying, please help me it is super annoying

A new machine should not be giving this problem. I would phone HP and ask for service under the standard warranty. For contact info start here>>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

Asking again: any fixes for http:/1.1 300 and 500 errors in iCal-Server?

Hi there
I've set up several OS X servers in the last few months, most of them with ical services up and running. Quite everything works smooth, but most customers experience sooner or later errors like
http:/1.1 300... (mostly with repeating events, which seem to be buggy in iCal&CalDAV already for a long time)
http:/1.1 500...
neither are there any relevant entries in the log, nor does it occur on a regular base - in fact, we can observe these errors all 2 or 3 weeks or so. Stopping an restarting of iCal services usually fixes them. DNS is set up perfectly well, including the SRV-entries.
What about you? Do we just have to live with these errors? Or do I really have to sell Kerio to my customers?
Thanks for any suggestion
Regards
Roman

Hi Roman
I have had a few years setting up and administering various calendar options on Xserve.
The Apple built in iCal server is by far the worst of the lot.
Previous to that we used phpicalendar- http://phpicalendar.net/documentation/index.php/Main_Page
It is a bit dated and does not support the same feature set as the Apple one. It works well though.
Kerio on the other hand is great, works well and is easy to use, apart from accepting invites on iOS devices. Its also a much better mailserver than Apple's one.
Another option is to write a script to run everyday to stop and restart the ical service?

Customize the 404 and 500 server error pages

how can I customize the 404 (http 404 error) and 500
(internal server error) server error pages?
Where are the corresponding pages?
thanks for your help
Celestino

Theoretically, quite easily:
The default error pages can be overriden by any html/jsp/servlet resource. You have
only to map the error codes with your own error pages within the Deployment Descriptor
file (web.xml).
See the documentation for details.
HTH
Ales
"Celestino" <[email protected]> wrote:
>
how can I customize the 404 (http 404 error) and 500
(internal server error) server error pages?
Where are the corresponding pages?
thanks for your help
Celestino

After installing windows 7 on my hp pavilion dv4000, the audio and vga caase to work. help me

after installing windows 7 on my hp pavilion dv4000, the audio and vga case to work. help me with a recommended sound and audio drivers for windows 7 operational system. Please
This question was solved.
View Solution.

Hi:
Please click on the devices in the device manager. Then click on the details tab. In the properties drop down list, select the second item (Hardware ID's). Post the top string of characters you see for each device.
Those will identify the model devices you have and I can try and find the drivers for them. Is it Windows 7 32 or 64 bit you have installed?
Paul

I have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off

i have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off, and when I go into skype or cyberlink i can not see me

Hey Sam55555,
I see that you're having an issue with the webcam.
Could you provide me with a model and product number of your notebook.
So that I may look into this further to try and provide you with more helpful instructions.
Also, this Document should help you out. If it doesn't let me know the full model name and i will find a document for your notebook.
What i consider doing is the section that says "Reinstalling the original webcam program that came with your computer".
THX sam

PC pavilion HPE h8-1120it and 500-012el supports SDD sata 3?

Similar Messages

Maybe you are looking for