PC reboots instead of waking from sleep when I OC w/ MSI Afterburner

Wondering if you gentlemen can help me with a strange bug?
I just picked up a MSI GTX 660 Ti Power Edition video card from NewEgg yesterday. If I overclock my video card with MSI Afterburner, I've found when I try to wake my computer from sleep mode, it reboots instead of waking from sleep mode. I don't get a BSOD or anything like that, I just tap my keyboard, computer powers back up, and after a few seconds I am greeted with my motherboard's splash screen instead of where I left off in windows (and windows nags me that it wasn't shut down properly last time.)
But if I run my video card at stock settings (no MSI Afterburner OC'ing) then sleep resumes just fine. My overclock settings aren't extreme, I can run Kombuster & Furmark for an hour and not get any errors/artifacts. In googling this problem I've come across a suggested fix - Change "RestoreAfterSuspendedMode" from 0 to 1 in the Afterburner configuration file, but sadly this did not fix it.
Computer Specs:
OS: Windows 7 64-bit
MB: MSI Z77 MPower
CPU: i5-3570K Ivy Bridge
MEM: 16GB 2133Mhz DDR3
HD: 240GB Intel 330 SSD
PS: 950W PC Power & Cooling
My MSI Afterburner OC settings are:
Core Volt +100 mV
Power Limit +14%
Core +50 Mhz
Memory +200 Mhz
Afterburner Version - 2.3.1 (Current)
I'm using the most current Nvidia drivers downloaded from the Nvidia website yesterday.
IF there's any other info you need, just ask!

Try updating the mainboard bios to the most recent:
>>Beta BIOSes<<
Also, what is the cards s/n and can you upload a copy of the vbios somewhere. You can use GPUZ to copy the current vbios.

Similar Messages

Os 10.4.7, reboots instead of waking from sleep

periodically my mac reboots instead of waking from sleep (with mouse or keyboard), once every few days. is this a problem? how can i change that?
should i worry about it?

Try updating the mainboard bios to the most recent:
>>Beta BIOSes<<
Also, what is the cards s/n and can you upload a copy of the vbios somewhere. You can use GPUZ to copy the current vbios.

Did 10.5.2 fix the reboot instead of wake from sleep problem?

Can those of you with 2008 Mac Pros that had the problem where the mac would reboot instead of waking from sleep report whether 10.5.2 solves your problem? I'm waiting to buy a new Pro until this is fixed.
thanks

Not for me. I installed the combo update, then the Leopard Graphics Update, repaired permissions. Did some work for about half an hour then put the MP to sleep using the menu. Came back not 2 hours later and hit the space bar to wake from sleep to be welcomed by the lovely Mac chime and a restart. I also installed the update on my MBP 2.6 17" which has not been having this issue and all seems well on the MBP, so I'm leaning towards a hardware problem.
History - Been having the issue since I received the MP 3.0 on the 17th of Jan, tried resetting the SMS, zapping the PRAM, etc,etc, several times to no avail. Called Apple Care and was given a case number but not offered any solution other than removing all items from Login Items under Accounts and configuring the Energy Savings settings to Never, Never and unchecking all accept for Restart automatically after power failure. This didn't work either as the day after I had called and did his with the product specialist it happened again.
Everything is stock on the MP 3.0 2008 - Needless to say, I'm putting in another call today.

Mac Pro restarts instead of waking from sleep

Since installing 10.5.6, my 8-core Mac Pro (early 2008) has lost the ability to wake from sleep. It seems to go to sleep pretty quickly (if a little faster than before), but when I wake it up by pressing a key on the keyboard, I hear the Mac startup chime and watch as it restarts.
I've manually shut down and booted up a few times now, and the sleep misbehavior continues.
Anyone else? My 10.5.6 MacBook has no problems waking from sleep, only the tower.
--Chris

Well, I thought this was resolved a couple of weeks ago after reading a suggestion that called for doing a controlled shutdown, then unplugging everything including power, waiting a minute, replugging only power, and starting up, using the power button on the front to sleep and wake up. It seemed to be waking instead of restarting, and was working normally for about three weeks.
As of today, I'm back to restarting when I try to wake. I have tried the unplug-everything trick again, and have zapped the PRAM multiple times (seriously, though, does that EVER work?). Nothing helps.
As mentioned above, I'm already on the BootROM version that EFI Update 1.3 provides, so that's not an option.
Thinking the next stop might be the Genius Bar, in hopes those guys have seen this.
--Chris

Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface

I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!

Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem.

White screen after waking from sleep when external display is attache

Waking from sleep mode to lock screen when a secondary monitor is connected with an HDMI cable presents a blank white screen with user icon but no other elements, including the box where one enters their password. The remaining UI elements appear only after disconnecting the HDMI cable.
Configuration:
MacBook Pro (Retina, 15-inch, Mid 2014) with nVidia GPU

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Mail/Provide Mail Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Losing Displays Color setting when waking from sleep

Hey y'all!
I haven't seen this specific problem addressed anywhere in the forums - I have a Pismo 500 running 10.3.9. The problem is that when I wake the Pismo from sleep, nine times out of ten, it defaults to the uncalibrated display space. If I open the Prefs pane, the Displays>Color tab shows the correct calibrated profile selected, but the colors and such are way off. If I just click on the selected profile, it goes back to that profile correctly - but that's too many mouse clicks just to see correctly after waking!
The confusing thing is that this problem never shows up during starts/restarts - during the boot process, the Pismo correctly applies the selected profile and the change is noticable (my display is natively WAAAAY too blue/cyan for my tastes and line of work). So it works from a standing start, and from a warm reboot, just not waking from sleep.
The problem didn't manifest until after I moved from 10.2.x to 10.3, but that move solved so many other problems, I'm still happy I did it.
Any thoughts?

Hi,
I do have a work around this problem.
Go to mac hd, to users, to what looks like a house, to library, to colorsync, to profiles. Open profiles and take that profile and put it on the desktop.
Next go to mac hd, to library, to colorsync, to profiles, to displays.
Open displays and place the profile on the desktop in the there.
That solved my problem.
emac Mac OS X (10.3.9) Combodrive, SN G84162YCQJB

Mid 2009 17" MacBook Pro battery shutdown issue when waking from sleep.

My unibody 17" MacBook Pro occasionally shuts down on waking from sleep when it isn't plugged in.
When I open the lid to wake it I can hear the hard drive and fans starting to spool, and then the next second it's off and silent. The laptop doesn't mind being turned on again after it does this and might go a week without doing it again, equally it might do it next time I try and wake it from sleep. It does this regardless of battery charge level.
coconutBattery says the battery still has 86% of its designed capacity, and I haven't noticed anything else untoward regarding battery charging or performance when in use.
So my question is two fold:
1) Does it sound like the battery's internal processor is malfunctioning, or could it be something else?
2) If it is the battery's internal processor, will replacing the battery replace the processor, or are they fitted separately (in defference to the 'internal' part of its name)?
Cheers,
James
nb. just in case it makes any difference, the laptop is a 17" Mid-2009 MacBook Pro, 2.8GHz Core 2 Duo with 4Gb Ram running OSX 10.7.3

James
I have had issues when i press the space bar from sleep, sometimes it wakes but others i'm forced to power it on with the power button.
Is this similar to anything you've experianced?
Its so inconsistantly these days, but i'm also connected to an external screen.

Rebooting when waking from sleep

Hello all, my early 2009 Mini reboots when waking from sleep. How can I get it to wake up normally? thanks,

In the interest of getting better advice, can you add a little more information to your post?
How is the mini being put to sleep? What's the procedure being used?
Does the front panel white LED slowly pulsate as it should when the mini is sleeping?
How is the mini being awakened from sleep?
Describe as best you can the chain of events going from the sleeping mini to reboot.

Crucial RAM causes reboot when waking from sleep

I bought my 2GHz iMac core duo with 1GB RAM already installed and bought another 1GB from Crucial using their "memory advisor tool".
Installed the RAM fine and have had ongoing intermittent problems with reboots after waking from sleep - stopped when I removed the crucial RAM. Crucial were good enough to RMA the RAM and the replacement module...........does exactly the same!
Do I now -
a) Buy only Apple store RAM which is 3 times more expensive?
or
b) Ask Apple to fix a faulty mainboard
Unlikely I got two faulty RAM modules I think.

Simon,
I agree that it seems unlikely that Crucial would ship you two faulty modules, but I suggest that you test the theory before taking your iMac in for service. Try removing both modules, and placing the Crucial module in the slot in which the Apple module was located, and then see how your iMac functions. If everything is fine, place the Apple module in the second slot, and see how your iMac functions. If the problem returns, it would seem likely that the slot is bad, versus the module, and therefore would justify taking the iMac in for repair.
Joe

Computer Name changes when waking from sleep

Hi,
I'm running OS X Lion Server on a Mac Mini 2ghz Core 2 Duo and every time it wakes from sleep I get a message saying "There is already a computer on the network named MacServer, renaming to MacServer (2)".
It only happens when waking from sleep. If I reboot or use the mini for hours without sleeping it's fine, but once it's gone to sleep it renames on wake. When it sleeps overnight it's named MacServer (5) by the morning, as it wakes up every two hours or so to re-register itself on the network and each time it renames itself.
I don't have any other compters on the network with the same name. The only other computer is a MBP and has a completly different name.
Here's my setup;
My Mac Mini is wired via ethernet to a Time Capsule. AirPort is turned off (I've tried on and off).
My Mac Mini has a static IP address (x.x.x.40) with DHCP for everything else (DNS, etc.)
The Time Capsule is wired to an ADSL router via ethernet.
The ADSL router manages DHCP and NAT, with IP pool x.x.x.2 through x.x.x.30.
DHCP and NAT are turned off on the Time Capsule (bridged mode).
Wireless is turned off on the ADSL router.
Time Capsule is handling wireless.
I've tried resetting the ADSL router. I've tried resetting the Time Capsule (to factory defaults).
The problem seems to be with mDNSResponder, as the log seems to suggest that it is this daemon that thinks there's a duplicate computer name. I've even looked at the source code for mDNSResponder and the last mod-log entry suggests that a fix was put in for this issue in 2009. It doesn't look like it's fixed it, though.
I've tried doing a fresh install of OS Server several times now and, after the last install, it started happening before I got a chance to restore from a Time Machine backup. i.e. on a completly fresh install and assigning a completely new computer name.
Can anyone help me on this issue? It's driving me insane!

I switched the server's WI-FI off and connected the ethernet cable to the ADSL router instead of the Time Capsule and, after several reboots, sleeps and wakes, there was no change to the server name. The Time Capsule was still switched on, connected to the ADSL router via ethernet, and available on the network, however the server rename issue went away.
I then took the ethernet cable out of the ADSL router, plugged it back into the Time Capssule, put it to sleep, woke it up, and guess what? That right; 'The name of your computer "safserver" is already...renamed to "safserver (2)"'
So, it looks like it's the Time Capsule. I'm going to downgrade the firmware from 7.6.1 to 7.6.0 to see if the last update is responsible. If this doesn't cure it, I'll try older firmwares and, if none of them work it's time for a Genius appointment.
(I khow another obvious question lurks: "why not leave it plugged into the ADSL router?" Answer: "ADSL router doesn't supply Gigabit ethernet.")

Keychain is read-only when waking from sleep

So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

Hello-
Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete
7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
7/10/13 6:53:14.354 AM configd[18]: network changed.
7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
7/10/13 6:53:18.519 AM blued[65]: Read version 2 info. Number of devices:2
7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
7/10/13 6:53:20.635 AM kdc[54]: label: default
7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
7/10/13 6:53:24.499 AM digest-service[87]: label: default
7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
7/10/13 6:53:25.671 AM kdc[54]: KDC started
7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503 root: no
7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a] @ 0x0x7fe8b9e31660 because it's already been started.
7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

Missing sound + missing USB power (sometimes) from Thunderbolt Display when waking from sleep

Hi
Two problems - one of which is driving med crazy!!
Have the latest updates, and the display is connected to a MBA (mid 2011).
The two are almost alwayes connected, and every time I wake the MBA from sleep, the Thunderbold Display does not "support usb sound" - the sound options are only MBA and headphones. Only a restart will give me the option to use Thunderbolt as sound output: WHAT TO DO!?!?!!
Sometimes when waking from sleep the USB in the Display seems to be "off" - the will not charge my devices (iPhone, iPad etc.). Only reboot seems to fix this... I have seen this in other discussions but not found a permanent solution - any thoughts?

Same here but reinstalling OSX is a bit drastic. I solved the problem by deleting a preference.
Go to Macintosh HD then System then Library then Preference panes then Sound.prefPane
Delete Sound.prefPane (you need to type your password).
Logout or restart.
This has happend twice this week so WHY is this suddenly occurring?
Hi,
I found this solution in the forum, but I can't find it again. I had cut and pasted it into a text file, because it solved my problem. I just don't want to take any credit for it. It did work for me. I had no problems for 3-4 weeks with the monitor, I have had the sound problem since last Friday. Very frustrating.
BSGINC

Desktop Wallpaper Screensaver Bug? [When waking from sleep]

I'm not sure if this topic is in the correct category but it seems to fit.
I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
Thanks.

I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

IBook no longer asking for a password when waking from sleep or screensaver

My iBook was fine until I installed the Security Update 2006-002 via software update. After the "required" reboot (reboot #1) everything functioned as normal.
On a subsequent reboot (#2) and several other reboots trying to correct the problem (#3-#5) I've found that my iBook no longer asks for a password when coming out of the screensaver, or when waking from sleep.
Yes, I have checked the security pref panel every time and have ensured the checkbox is checked. I even Sudo'd the panel just to be sure.
I downloaded the aforementioned security update and re-applied it. It corrected the problem during the same "required" reboot (#1), but after rebooting the computer a 2nd and 3rd time the problem has came up again.
I wish my iBook wasn't sick! Thanks, I tried searching as best as I could to see if this is a repost.
iBook G4 1.2 Mac OS X (10.4.5) All updates via Software Update
iBook G4 1.2 Mac OS X (10.4.5)

I don't have a specific fix but this generalized fix seems to take care of most problems for me. Download Cocktail, Onyx or MainMenu then run Rebuild Launch Services database, the maintenance (cron) scripts, clean all caches then Repair Permissions and restart.
To test it don't keep restarting, that's extra wear and tear on the computer, just put it to sleep and wake it or log out then back in.
If that doesn't work get Disk Warrior and rebuild the directory.
And if that doesn't work do an archive and install then one big upgrade.
But don't go past running one of those three utilities until you see if someone has a better fix for you. It might be as simple as trashing a preferences file.

PC reboots instead of waking from sleep when I OC w/ MSI Afterburner

Similar Messages

Maybe you are looking for