PC Recognizes HV20 but no frames are captured in Premiere CS5? (Or HDVSplit)

Hi there.
Recently upgraded my laptop to a nice Sager NP8130 as a mobile editing workstation, and when I went to begin capturing HDV footage the other day, I wasn't able to!
My PC detects the camera (Canon HV20) fine, it shows up in device manager as functioning. In Adobe Premiere CS5, and HDVSplit I can use the playback controls to shuttle the tape around, and I even get timecode feedback correctly on the PC.
But no matter what, I can't get any dang video to capture!
Camera and cable are definitely working fine; I dug out my old laptop and captured the footage I needed with no problem.
If anyone has any ideas, or any experience with this error, I would dearly appreciate any input,
Thanks!

Unfortunately, with no success, I also tried that method of switching to the Legacy firewire driver, as it used to be a common suggestion back in the vista days.

Similar Messages

Computer recognizes camera, but does not log & capture

I teach in a classroom where we have 23 new iMACs and the new Final Cut Studio. FCP recognizes the Sony miniDV camcorders we have, but some of the computers, although they recognize the camera, will not log and capture. The new iMACs plus the loading of FCP (making an image and transferring it to all the computers) was done by the tech dept. The question: Why does FCP on most of the computers recognize cameras and log and capture, while on others it does not? It was suggested I go to a FCP users group meeting to ask the question. Does anyone out there know? Thanks.

If it's working correctly on some machines and not others, and all installs were identical, then here are a few things to try:
• First, are the FireWire cables good? Test one from a working machine on a non working one.
• Also, are they inserted securely at camera and mac ends?
• Do any of the non working macs have other firewire devices connected to other firewire ports? The iMac has only one firewire bus, even though it has multiple ports, and this can sometimes cause a problem.
• Is everything being turned on and connected in the proper order? Usually it's best to have the firewire cable connected at both ends, and the camera powered on before the mac is started up.
• Check the cameras themselves; in the camera's record in/out menu, it should be set to play out DV, and when the firewire cable is connected, most Sony cams will display a DV in/out message on the LCD screen.
• And, finally, are you using the same Easy Setup for all of the macs/cameras? I'm guessing you would want the NTSC DV setup; this should be chosen before a new project is opened to capture into; are all machines set up the same way?
Sony camcorders generally work pretty well with FCP, so I'm guessing one of the above choices will solve your problem.

Some frames are not being shown when printed but it is there in print previ

Hello Experts,
I am currently developing a form in smartform wherein I need to put frames in all cells. When
I print preview, all the frames are there. But when I print it, some of the frames are not shown.
What could be possibly the problem?
Thank you guys and take care!

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Hallo. My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help? Thanks

Hallo.
My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
Thanks

Did you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
Iphone 3G does not support ios 4.3

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Ok, you are in frame animation mode. I thought cs5 had a timeline mode, but now I think I was wrong.
In frame animation mode what you do is in one frame you have the object rotated in one position, then select an other frame and rotate it. If it rotates the first frame, which I think it will. Create duplicate of the object in a new layer. Then rotate the second layer.
At this point in my example you would have two layers, one of which has a rotated object.
Clear the frames
Convert the two layers to frames.
You now have two frames, one for each layer.
Select both frames then click the tween button.
This will create the in between frames.
In the tween dialog box the higher the number of frames set here, will create a smoother animation but will result in a longer time frame for the animation to play.
Because Photoshop has no way of knowing which way the object should rotate, it is feasible for it to rotate the opposite direction or could look wonky. Just undo and add an in between layer showing how it should look in the middle, then continue on.
So your layers should be the following, a frame that shows all objects in their rest state.
All objects that remain in a rest state must be copied to the next layer (ctrl-j on Windows or cmd-j on Mac)
All subsequent layers are then used for rotating a duplicate of the object. (Ctrl j or cmd j)
You will find the commands to clear the frames, convert layers to frames and tweeting in the hidden menu found when you click the small icon in the upper right hand corner of the animation panel.

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why?   I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks.      LM

I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

Screen Capture and Game Capture Frames are "Jittery"

I took a capture of and OpenGL game "Minecraft" (it saved in .avi), but when I import it into Premiere Elements the footage will go smoothly, then cut back multiple frames, then skip ahead resulting in unusable video. The same thing happens when I save the video.
I tried the same footage in other editors (Corel VS X2, Windows Live Movie), and it ran smoothly. I used PlayClaw to record.
If it helps the video was:
Res: 848 x 480
Aspect: 16:9
Colors: YUV422
Compression: Unknown

Download and install G-Spot, to see what CODEC (Compression) is being used.
That is likely the issue.
The odd Frame Size will make choosing a Project Preset difficult.
See this recent THREAD. Be sure to check the various links in that thread.
Good luck,
Hunt

Video frames are heard during play back in the audio line (but not on the DVD)

Another problem occurs( among lots of other annoying problems which are not solved yet). Using PPRO 5.5 in two projects now and I am very dissapointed in the quality of this software comparing to PPRO 2.0. To many problems to mention here. It works and thats all.
This is the new problem. When I play the project, the video frames "are heard" ( sounds like the old film projector transport) at low level in the audio signal together with the audio signal itself (at normal level)
This is annoying during editing, but doesn't affect the results by burning on DVD. Is that an normal situation? In my old PPRO 2.0 not such a problem was there. Or is there something wrong.
Thanks for replying
Chris

Chris,
I'm sorry I could not find a solution. In fact I'm stumped and request the help of Todd or Wil or some other Adobe employee to help you out.
Why? The reason for requesting Adobe's help in this way is:
a. Chris has a limited knowledge of English and works with a Dutch version of Windows, which makes it difficult to communicate on the phone.
b. I have checked his system with Teamviewer and the system is more than adequate and is properly tuned/optimized for the task he wants to perform.
c. I can't find a solution to help him.
What is the problem?
System is an i7-2600K with 16 GB memory, P67 mobo, nVidia GTX 570 and 520 cards, 5 x 1 TB disks, 3 monitors, on-board audio.
Source material is simple DV PAL widescreen from a JVC camera. Sequence settings match, no problems here.
Playing a clip with WMP shows no problem, playing from the camera to a TV shows no problem, but playing from the timeline in a CS5.5.1 project results in a clearly audible rattling that is comparable to the rattling one has when projecting old 8 mm film, only louder. This was clearly audible for me over the phone.
I have no idea where to start looking for a solution, because his system looks good from all sides, is properly tuned, has more than enough horsepower to edit simple DV material.
So please Todd, Wil or anybody else from Adobe, can you help Chris?

EDI billing outputs are capturing credit memos as well as invoices

I am a newcomer to the company I am currently with, and to this forum, and I have 6 years of experience in EDI and SAP SD.
I am working on a project to determine why our EDI billing outputs are capturing credit memos as well as invoices, and attempting to send them by EDI, causing failures in our Seeburger translator. Most customers donu2019t want credit memos by EDI. My goal is to track backwards and determine what portion of the EDI process in SAP is pulling credit memos rather than just invoices. I suspect that someone intentionally made changes in the past to put this in place, but we need to have a message type that includes invoices and credit memos, to be attached to specific partners that want this, and another more standard message type that sends only invoices.
The message control for the example partner specifies Message Type ZURH (customized by this company for some reason), Application V3 (which seems standard), and process code SD09 (which seems standard). Could someone help me to navigate to an area where I may be able to find out what parameters are used to determine what transaction types are pulled to be sent out by EDI for billing? I suspect that the issue may be in Application V3, but I am unable to find any help to view u2018Applicationsu2019, because application is such a widely used word.
How can I display/change Application V3, in order to check itu2019s contents?
Any other ideas why credit memos may be included would be appreciated, and I always appreciate having the transaction codes mentioned as well.
Thank you in advance for your assistance.
Application V3 (what specifies what transaction type this pulls?)
Message Type ZURH,
Process Code SD09.
Access Sequence used is ZSD1 Billing Documents (Access Sequence ZSD1 does not appear in transaction V/48 (?))
Transmission Medium is 6 EDI.
The program is RSNASTED, and the FORM Routine is EDI_PROCESSING.

Satish,
Thanks for the suggestions.
I checked transaction VV33 u201CDisplay Output Condition Records: Billingu201D for Output Type ZURH, Key Combination Sales Org/Payer, and I find the example customer linked to ZURH, as I would expect (5010013645     BEST BUY CANADA Vendor #41448     PY          6     1).
I donu2019t see any data about specific transaction types such as credit memos or invoices, so I may not be looking in the right place. I donu2019t find entries under any other key combination. How would I check if Output Condition records are maintained for credit memos?
In regards to the output type being assigned to the credit memo billing type (ZG2U), Iu2019m afraid I donu2019t know how to check that either.
In NACE, I see that u2018Proceduresu2019 list the CTyp (?), and procedure US0001 is the only one that includes credits and debits. I donu2019t recognize the Ctyps ZDN0 and ZCN0. The billing type is ZG2U, which I don't see in any of the Procedures:
10     1     RD00     Invoice
20     2     ZPRO     Proforma Invoice
30     1     ZCAN     Canadian Cust. Inv
40     1     ZCOM     Commercial Invoice
50     1     ZDN0     Debit Note
60     1     ZCN0     Credit Note
How would I be able tell which u2018Procedureu2019 is being used for Application V3, and how would I change that to another Procedure for testing?

Can't figure out why I'm dropping frames during capture

I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
Any other ideas on what's going on and how to try to fix it? Thanks!

Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

Dropped frames in Capture: Express vs Pro

Hi, I'd been using Express for a year and a half; last week I bought and installed Studio Pro2, partly because of the following experience which surprised both myself and my lab instructor.
I had a Standard Definition miniDV which resulted in many dropped frames while capturing at my house with Express on my iMac. Subsequently, I successfully captured the entire tape without any dropped frames on my university's computer which is a tower (G5? Intel?) running Pro (Pro6? Pro5? Pro4?). Out of curiousity, I tried capturing the same tape from the same camcorder using the same tower, except this time I did it with the tower's Express instead of the tower's Pro (yes, the tower has both applications installed). The problem of dropped frames returned, just as badly as they had been at my home. We are very surprised!
Is there a reason that Pro does a better job of interpretting potentially bad tape than Express does??? I would have assumed the Capture algorithms to be the same, but that no longer seems likely. Does Apple know that there is a difference between the two applications in the success of Capture? Should they be notified, or am I being naive to consider that they don't know the difference?
Thanks; have a great year...
20" iSight PowerPC Mac OS X (10.4.9)
20" iSight PowerPC Mac OS X (10.4.8)
20" iSight PowerPC Mac OS X (10.4.8)
20" iSight PowerPC Mac OS X (10.4.8)

I just discovered my ''subscription'' response was off:-(( couldn't figure out why nobody's answered my last 2 posts:-)) I'm not rude enough to ignore people who help me, I'm just stupid!
It cost me; two months ago I purchased Studio2 as a direct result of my ''problems'' with FCE; tonight I read your post and realize the problem was actually 10.4.9 + 3.0.1. Needless to say, I'm now on 10.4.10. Lucky for me, I get Studio2 at academic prices, and I will actually benefit from DVD Pro as I now own an HD camera, and Compressor, but I still feel stooopid.
I have not been able to verify the school's versions of FCE and FCP (lab's closed in August), but it makes perfect sense that their FCE is 3.0.1, whereas their FCP was probably one of the earlier (non-offending) versions.
Thanks, and have a great year,
Harvey

Dropped Frames on Capture/ Adding extra USB buses to a G5

Hello,
I am having trouble with dropped frames on capture. It is a problem I have dealt with many times. I always try to capture my media to some sort of external drive; It always seems to work fine until the drive fills up(to about 20 GB left), and then I start to get dropped frames problems. I've tried freeing up space on the drive, but once it starts it seems that even freeing up space doesn't fix the problem. I was told that adding a USB bus can fix this problem -OR- You can add an extra internal storage drive to the G5. Once upon a time I did the latter and it worked, but now I can not even capture onto my extra internal drive?
My capture attempts seem to get about 5 minutes before I get dropped frames.
Do you think that installing an extra Bus could fix this problem? If so what kind of Bus should I look for for a PowerMac G5?
I am running FCP 4.5, Mac OSX 3.9, Quicktime 7(In the past this has not been an issue), I am using a Power Mac G5- two 160GB internal drives.
Much Thanks in Advance, the Help is always fantastic around here,
Justin

A USB bus or a FW bus?
Because USB drives are not fast enough to sustain capture.
Adding a PCI Firewire card from a place like Sonnettech may work.
http://www.sonnettech.com/product/allegroexpressfw400.html

DVD video/audio rip to FCP but skipped frames, why?

Dear Pros.
I am having an issue with frame and audio skipping on me through out the clips that I ripped from DVD video. DVD video is created by Panasonic DMR-6070. It is an educational lecture that we create at the university. We use DMR-6070 to master the video. DMR-6070 creates MPEG2 video in 325x480. I am able to rip the video using MPEG Streamclip as 720x480 QuickTime DV/DVCPRO NTSC video/audio with 29.97 FPS.
When I bring the DVD ripped footage to FCP and start to edit, I noticed that every10 seconds or so, video and audio skips. I don’t know why it is doing this. The original DVD video does not have this issue. When I tried to export from DVD, I specified to 29.97 FPS. FCP is set to edit with DVD/NTSC settings with 29.97 FPS. The video should come into FCP without any hitch. But I am stuck…
Also I shot the same footage with DV cam in different angle. I am trying to edit two footages using Multiefootage edit mode. The footages were cued up by IN point. However, videos start to become out of synch after 2 min. of footages past. So I am assuming that some issues with dropped frames.
How do you work with DVD video and bring the footages into FCP? Do you see any dropped frames? Can you Multifootage edit with a mix of video sources?
Thank you in advance.
Reed
G4 Dual, PB 17 Mac OS X (10.4.3)

There is something very strange about the size of the MPEG2 files you say the recorder produces; the file size you quote is MPEG1 video not MPEG 2. this is the start of your problems I would think. I have a number of Panasonic recorders and they all produce 720x540 in standard mode PAL
I trust you are NOT using the Extended Play mode on the recorder, the 6hr setting?. This will really muck things up if you are.
I get excellent results from video recorded on the Panasonics, taking account there is a quality drop by converting from DVD.
I convert to DVD to Quicktime using DVDxDV, edit in FCP then output to DVD again and never have problems.
Try a test using the free DVDxDV tryout application and see what results you get.
As to dropped frames in editing the DV cam I assume you have the basic configuration for using FCP:
- you are capturing to external media drives, not the system drive
- have the correct version of QuickTime for the version of FCP and the OS you have
- you have the same AV settings for both sets of footage you are trying to edit on the timeline - FCP will not edit different setups in the same timeline
see this link: www.DVDXDV.com
regards
Gary

Dropping frames during capture

I touched on this topic months ago, but have found no solution.
I am running CS4 on a Windows 7 64-bit machine with 12gb of RAM, twin 1500 gb hard discs, Intel Core i7 chip, ATI Radeon HD5870 graphics card.
When capturing video from my Canon HV30 camera, or from my Sony miniDV tape deck, roughly every 90 seconds or so there is a second or two of interference Little flashes of light appear in the capture window, often frames are dropped, and a quick burst of interference appears on the sound. This also occurs if I am not capturing, but just playing, or indeed just pausing, the video in the capture window.
It's not the FireWire cable: I've tried two.
It's not the camera or the Sony deck; they work fine capturing onto my lap-top
I've tried shutting down every programme I can on my desk-top
I've tried changing screen resolution
I've tried saving to a different hard disc
I've updated drivers for my graphics card
I don't think it's interference in my room, as again I can capture, via Windows Live Movie Maker, onto my lap-top
The same problem occurs when I use Windows Movie Maker on my desk-top, so it's not CS4 itself
The only things I can think of are: graphics card fault, or a fault with the 6-pin firewire slot. But I only have one firewire slot.
Can anyone suggest any solutions, please?

Thank you, Bill and Jim.
The interference is only roughly every minute or 90 seconds, but I agree the probable cause is some process. Bill, if I close down everything I possibly can using Task Manager, won't that also include the ones started at boot/startup?
I have only one FireWire slot and therefore the camera is the only FireWire device I will have plugged in at the time.

Problem with source tape and drop frames with capturing HDV

I am having trouble capturing a tape. Every time I try and capture I get the message problem with tape, I try to change settings but after a few seconds of capturing the capture stops. I know that the tape is fine so it does not have anything to do with my tape. Capture also stops because it comes up with a message saying drooped frames.

Are you capturing to an external or secod drive, right? What kind of drive? What camera?
Alberto

PC Recognizes HV20 but no frames are captured in Premiere CS5? (Or HDVSplit)

Similar Messages

Maybe you are looking for