PC Recognizes phone but Desktop Manager shows disconnect​ed

New laptop running Windows 7 64-bit.  Version 6.x of BB Desktop Manager loaded.  First time phone is plugged in, it is recognized and Sync for Calendar and Contacts configured and executed successfully.  After that, any time the phone is connected to PC, it correctly maps drive to device and I can see the files on the phone from the PC, but Desktop Manager shows disconnected.  It shows phone, model, pin, and all the right information, but still shows Disconnected.  Sound familiar to anyone?  Any help?

Hey cqbush,
Welcome to the BlackBerry® Support Community Forums.
Please review the following article that provides trouble shooting steps to try if the BlackBerry® smartphone is not being detected by the BlackBerry® Desktop Software: 
Identifying and troubleshooting issues with the BlackBerry® Desktop Software detecting a USB connected BlackBerry®smartphone
http://btsc.webapps.blackberry.com/btsc/KB00125
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • Desktop Manager shows "Disconnected"

    Hello...
    I just installed Desktop Manager for Blackberry on my laptop and I'm trying to get it to connect with my Blackberry Curve device.  It shows as "Disconnected" and there is no PIN listed (Shows "None").  What do I do?  I've already done a hard reset on the device by removing the battery for a couple minutes and then tried to reconnect via a USB port and that didn't work.  I also tried on 2 different USB ports and neither seems to recognize my device.  What else should I do?  I hope I don't have to reinstall it as it takes so long.
    Thanks

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting atricles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone' The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?

    When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'.  This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library.  How can I get it into my library?  It doesn't sync either.

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • Apps installed from disk, but Application Manager shows them as not installed

    I have all Creative Suite (Master) apps installed from disk, but Application Manager shows them as not installed. Why?

    I find a way that could be firing this issue.
    First, I installed Creative Cloud in spanish language, then installed some apps like DW, PS, FW, FL, and some more.
    Then, some days ago, I realized that my apps were in spanish language, but I prefer them in english, so I switched the language of CC to english in settings options.
    Now, these apps installed in spanish language are marked as "not installed" and I see the option to install them. And applications installed before language change, are fine and tracked for updates.
    Maybe the issue is related to language changed, the CC manager can't track the language change.
    Hope to find a solution in short time, this could be a major issue for someone.
    At this time, I'm re-installing the apps in english, I think they must override the spanish ones.
    I'm using MacOS 10.8.4 (Mountain Lion) on MacBook AIR, Core i7 (if that make sense)
    Cheers!
    Mariano Carrizo

  • Desktop manager shows my blackberry as connected but i can't click on any of the options?

    as you can see i think everything is connected properly - if not can someone tell me what's wrong? but basically i just can't click on any of the options like media manager and i don't understand why. i can right click them and press open but still nothing actually opens. it's really starting to bug me now - ideas!?
    Message Edited by kpaxton on 07-13-2008 10:33 AM
    Message Edited by kpaxton on 07-13-2008 10:33 AM

    Working means that the software is trying to communicate with the device. If it never changes from working then something is wrong. Try rebooting your PC and the BlackBerry. If that doesn't help then remove and reinstall the latest Desktop Manager.

  • Being asked to Reload Software but desktop manager won't connect

    I have a curve 8900 and I run the BB destkop manager on a Mac probook. I plugged the curve into my mac this morning via usb and manager told me that for some reason there was an issue with missing software on the curve and asked me to download and reload software - I did this but after a short while of downloading it stopped and said it was no longer connected to the curve , even though it was still plugged in via usb.
    In addition, the curve is displaying a white screen and the msg Reload software 507.
    I've tried disconnecting and reconnecting the phone to the Mac but all it ever says is that it is waiting for device to start and it will not recognise it or connect to it so I can't even reinstall the software or reinstall via a back up. I reinstalled BB Desktop manager and  I've tried moving the battery and sim on the phone but this also makes no difference.
    HELP!!
    dd

    507 just means no OS.  You're going to need to find a PC and reload the OS.  Use the link below and follow the instructions in the first post of this thread:
    http://www.blackberryforums.com/general-8900-series-discussion-javelin/231976-latest-os-8900-5-0-0-1...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • ITunes recognizes iPhone, but doesn't show sync screen-what to do?

    My iphone 3G S is authorized, has the latest software and I am running the latest iTunes as well on my MacBook.
    When I connect the iPhone, the icon is visible on the left hand side pane in iTunes—under 'devices', but the screen freezes when I select the iphone icon, i.e. nothing seems to happen and I can't see anything related to syncing my iPhone.
    File->'Sync iPod' item is also dimmed.
    (Photos sync automatically, with no problem)
    I can't seem to find any relevant info so far, because iTunes recognizes the iPhone in my case—but won't show the sync screen.
    Message was edited by: Bonal

    First step is to see if the problem is with the phone, the USB or the computer. For the USB make sure you are connecting to a port on the back of the computer, not to a hub and not to the keyboard. Try connecting to a different computer. If it works you have narrowed the problem. If it doesn't the problem is the phone or the cable, so try a different cable. If it works on a different computer try creating a new user on your computer, then see if you can connect when logged on as that user (you could do this first, of course).

  • Managed server working, but enterprise manager shows it is down.

    Hi,
    I have installed weblogic 10.3.5 on a pair of Oracle Linux 5 vms.
    On one server everything looks great and runs great. On the second server (seemingly set up the exact same way), the enterprise manager shows that my managed server is down, not the admin server, but a new one I have created. I can't seem to find any errors, and everything seems to function just fine, I am able to start and stop the server from em and the console.
    Any ideas where to look?

    You may want to post this question in the WebLogic Server forum, the problem may not be specific to WebCenter Portal.

  • Itunes doesn't recognize ipod, but desktop does

    When I plug my 5th generation iPod into my MacBook, the desktop recognizes it, but iTunes doesn't and then iTunes freezes and I have to force-quit it. What is wrong?

    You cannot sync music from an iPhone to a computer. It does not support disk mode, as other iPods do. If the music is purchased you can connect the iPhone to iTunes and choose "Transfer Purchases" from the File menu.

  • Is there a way to back-up my phone to desktop manager without USB?

    The port on my Storm has failed.  I cannot charge my phone or attach it to my Blackberry desktop manager via USB.  Is there  a way to connect to desktop manager using bluetooth?  I would like to get a good back-up of my phone before I take it to the Verizon store because I am pretty sure they are just going to want to replace it.  I don't want to lose all of the things on my phone since the last back-up.  Thanks!

    Yes, look at page 167 of the user guide.
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Desktop Manager says Disconnected

    Blackberry 8330 Curve
    Blackberry Desktop Manager 4.3.0.17
    XP Professional
    Microsoft Outlook 2007
    Blackberry Enterprise Server Sync
    Installed USB and Modem Drivers (DM4.5_B13)
    Tried:
    Uninstalling / reinstalling desktop manager many times
    Tried 3 different USB cables and 4 different laptop ports
    Our IT guys spent 3 hours with no success either
    Removing Blackberry battery
    Message Edited by Flabby on 12-19-2008 10:33 AM
    Solved!
    Go to Solution.

    I finally resolved this myself by editing the registry and removing all references to Sprint and Roxio.  I then reinstalled the Blackberry desktop software v 4.7, rebooted and installed Sprint SmartView.  It now works.  The key for me was editing the registry to remove previously installed versons of the software.

  • Desktop Manager show's an error!!

    I am using Desktop manager version 5,
    when ever i connet my blackberry to my PC and open Desktop mananger it ask for an update for a APPLICATION LOADER! weill i press yes and then it downloads till 5.07mb and stops and says "please try again later" i dont know what is wrong and due to whcih i can use it at all....need to restore backup file asap.
    also does any 1 know how can i convert a NBU backup file from nokia to IPD (blackberry) file  ---- Please suggest asap its urgent!!!!

    Hey vaibz,
    Welcome to the BlackBerry Support Community Forums.
    I would suggest you that you perform a clean uninstall of Desktop Manager and then re-install Desktop Manager.  If you are unfamilar with uninstalling Desktop Manager, I have a knowledge base article which explains what to do.
    http://www.blackberry.com/btsc/KB02206
    To download BlackBerry Desktop Manager, please visit the following site:
    http://na.blackberry.com/eng/services/desktop/
    After Desktop Manager is re-installed, I would continue pursuing your restore.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • BB Desktop recognizes phone but can't connect.

    I've got 2 BB Curve 8520's, one that has "App error 523" coming up on the screen.
    I downloaded the most up to date BB Desktop software so i could fix it.
    My problem is that although the phone is recognized, it won't connect....
    In the bottom right hand corner it says it is connecting, but never does.
    My other BB 8520 connects easily & i can access all the the options in the drop down menu's....
    It also tells me what software version i have.
    I've never seen this phone working..... I thought it would be an easy fix.....
    Can anyone help?
    Cheers
    Solved!
    Go to Solution.

    Troubleshooting this error
    If you encounter this error, the first thing you should do is perform a hard reset of your BlackBerry smartphone. Depending on what occurs after the reset, one of the following options will be applicable.
    http://helpblog.blackberry.com/2012/02/error-523-jvm-blackberry/

  • Dump_area_size is unlimited but Enterprise manager showing 57% full in

    Hi,
    I am working on oracle 10g 10.2.0.1 on Linux 32 bit, In Enterprise manager it is showing Dump Area used (%) 60%, when i removed all of my trace file from bdump,cdump,dpdump,adump. My archive log files are also in this dump area, so i removed most of archice and from rman delete expired archivelog too.
    But it is still showing 57%
    When i look at parameter MAX_DUMP_FILE_SIZE=unlimited
    Then why there is a full % IN Enterprise Manager

    Type of Dump area Dump area directory Total Dump area Dump area used
    Dump area used% Free Dump area
    background /u01/app/oracle/admin/test4/bdump 69171924 37290596 57
    31881328
    core /u01/app/oracle/admin/test4/cdump 69171924 37290596 57 31881328
    user /u01/app/oracle/admin/test4/udump 69171924 37290596 57 31881328
    Can we change the the dump area size and if we let it reach 100%, what will be the consequences, whether Oracle database automatically delete the older one or database will not be available for use

  • Xbox 360 recognizes EX4 but don't show any files!!

    I recently purchase an EX4 for my movie collection (which is 1.37 TBs so far). Copy all my files from my Seagate GoFlex Home 3TB to the EX4, successful. My PS3 recognizes, reads, and plays my movies, no problem. Today, I purchased an Xbox wireless adapter for my Xbox 360. The Xbox recognizes, reads, and play movies from the Seagate but only recognizes the EX4 and NO VIDEOS FOUND is the message I kept getting. Am I doing something wrong???

    My network setup is: a Motorola NVG510 DSL modem (AT&T UVerse), Dell Inspiron Small Desktop 3647 (Intel Pentium G3220/3GHz), Seagate GoFlex Home 3TB and Western Digital EX4 8TB. Trying to convert fully over to the EX4, once I figure this problem out. The Seagate and Western Digital is network-attached thur modem, also. What would be my media server, if I have one?? Not familiar with media server.

Maybe you are looking for

  • About the validNotAfter value of the certificate SAPLogonTicketKeypair-cert

    I am configuring the SSO between the Enterprise Portal (NW04s based) and ECC 6.0 integrated ITS. During the SSO configuration we can specify a "valid to" date for the SAPLogonTicketKeypair. It will be stored in the certificate as the validNotAfter va

  • Problems moving playlists

    I purchased a 1.6tb ajump readyNAS network storage unit and installed it on the network at my office, and merrily ripped about 600 cd's in apple lossless format to the readyNAS via itunes. I set up each cd as a separate playlist to help with organiza

  • Problem with npm installing global packages

    If I try to install a global package with npm like : sudo npm install -g grunt npm will install the package in "/usr/lib/node_modules/". But it is not installing the executable anywhere. The result of npm -g bin is /usr/bin So that is where I would e

  • Entry for middleware missing in TBE11..

    Hi, Under what circumstances there is a possibility that the entry in the table TBE11 for middleware is missed out? The entry exists in dev system but not found in qas system. I am new to this but need to help someone. Request possible causes.Is ther

  • Help!  Very Urgent!

    Dear Sir, I am using Jbuilder and SQL Server 2000. I designed a CMP Entity Bean, but when I try to deploy the jar file(containing this EJB), SunOne Admin Console gave me the following information: Error Deployment Error -- Error while running ejbc --