PC settings are changed when Syncing

Can someone tell me how to stop the PC settings changing everytime I plug in my Iphone. My screen saver doesn't even work now, it tells me I need a updated video card to run the screen saver. Weird!

Hello elindi,
And welcome to Apple Discussions!
Although this article is a little dated, it references another article that may be of interest. Might not hurt to take a look.
http://support.apple.com/kb/TS2280
Another idea would be to try and update and/or re-install the iPod's drivers using the information in this Apple support document.
http://support.apple.com/kb/ts1538
Lastly, make sure your PC's BIOS is up to date as well just for good measure.
B-rock

Similar Messages

  • Since the latest software update, every third or so time I turn it on, my sounds settings are changed and I cannot listen to anything-music, YouTube, nothing. I can sometimes change something and it will work, but right now nothing is working. Anyone else

    Since latest software update, my sound settings are changing sometimes when I turn on and cannot hear anything. All controls are useless and cannot be activated. After changing several things, I have been able to make it work, but today nothing is working. Anyone else experience this  and have any ideas?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • What PDF settings are used when creating DPS articles?

    When you create a PDF file using Acrobat Distiller or InDesign you can modify settings such as font subsets, image down-sampling and compression which will have an impact on the final file size. Does anyone know what settings are used when articles are rendered in PDF format in DPS and can the settings be modified? Specifically, what type of compression is applied to images? If I were to place two images on a page, a png and a jpg with medium quality, would they be embedded in the PDF as is or re-compressed in another format and/or level of quality?

    Thanks for your help.
    So images placed in an InDesign retain their original file format and are unzipped when the article is loaded in the app.
    I'm assuming that if compression is applied to the original image files it can have an impact on performance. If you were to use jpeg files in a document they would need to be unzipped and decompressed. I've read other forum posts that suggest the iOS jpeg decompression engine is too slow to present a fluid user experience in a DPS app. The combined processing time of unzipping and decompressing jpegs files may steer me towards the png format.

  • Cmos settings are lost when unplugged

    Every time my computer is unplugged the cmos settings are gone when I restart. It's been like this since I got it 2 weeks ago. I thought flashing the bios with the latest version might help but it didn't. The battery voltage is 3.504V.

    A weak battery can still have the correct voltage and still be bad due to not supplying the correct amount of current. There is another possible solution. Remove your battery jumper and put it back on again. You may have a bad connection. The same holds true for the battery clip. If those don't solve it then you may want to pop for a new battery.

  • CS6 Illustrator and InDesign colours are changed when the PDF is saved.

    CS6 Illustrator and InDesign colours are changing when the saved PDFs are displayed on some different computers and for digital print output. I have ensured that the colours are all CMYK and tried different adjustments like preserving the numbers and the like but nothing is working. It prints properly on my inkjet and has displayed properly on different computers.

    You need to read up on color management, color profiles and all that....
    Mylenium

  • Settings are changed I can't go to settings accessibility

    My touch settings are changed.
    I am unable to go to settings accessibility 
    I want to deactivate the voice over

    And if that too doesnt work, connect to iTunes and configure: http://support.apple.com/kb/HT4064

  • CS6 crashing when sequence settings are changed

    When I launch CS6 and select a new doc - it had default settings for the sequence. When I change them to DSLR - or anything but default......CS6 crashes, does not say why & shuts down. Tried changing them after setting everything else - same result.
    Running a HP 8770w Elitebook
    32G RAM
    SSD primary
    twin SATA's raided
    nVidia K5000M (supported_cuda_card.txt in Adobe changed to read Quadro K5000M)
    Any thoughts? I cannot get PPCS6 to run anything if I change the setting.

    I'm sorry if I was not clear. I was referring to sequence presets. If you do not choose the proper one BEFORE working it screws up the footage. Sure, you can change the presets once working - but that crashed it too. Loved the comment though!!
    On a fresh load of CS6 - the default sequence preset settings are other than DSLR - which is what I use. SO, you either change them in the first window, or do so after the sequence is open & running. Neither would work and crashed out as soon as you touch a button other than the default camera setting. We tried a number of different approaches to get the proper setting loaded. Nothing.
    It turns out it's all an Adobe/nVidia issue. CS6 Premiere does not dig the Quadro K5000M.
    But, after repeated attempts we found a workaround.
    Fresh install of CS6 - restart
    Edit the cuda_supported_cards.txt file as described in these Forums. Restart
    Hack the card itself - restart
    launched CS6 Premiere Pro & not only is the card there - but fully operational.
    Results of speed tests in HD & 4K were amazing - this is realtime editing - finally.

  • Raw settings being changed when running droplet

    When I process Canon Raw files using a droplet Photoshop appears to be opening the files through ACR and converting them.
    To process Raw files I open them from Bridge into ACR and adjust the settings for the files, then click done. I then take those files and drop them on a droplet. The resulting Psd files are beig processed by the droplet, but their settings are being changed.
    For example, I open 10 files in ACR and set them to 8bit, then click done. I then open another file in ACR and set it to 16 bit. If I then run the first ten files through a droplet they are all changed to 16bit (the dropket does not include a conversion to 16bit)
    I'm using a PC

    Clarity and Exposure are per-image metadata that should be distinct per image.
    Admittedly I have only rarely used droplets and only as an output export action to apply to files coming out of LR some years back so am not sure if what is happening is to be expected or not, but here are some questions to help clarify what is happening for others to verify if that’s how things should be working or not:
    Are you looking at a raw file in ACR before and after being processed by your droplet and you see different settings or are you just looking at the PSD and seeing it looks different than the raw file in ACR?
    Do settings change if there is only one raw file dragged onto the droplet at a time and are the settings the same for every image no matter which images or how many are dragged at a time (the settings are saved as part of the droplet)?
    Are the settings the same for every image in the group that have been dragged onto the droplet but change from one group to the next (the droplet is picking up the settings of one of the images in the group and applying that to all of them)?
    Are the settings different for different raws in the group but seem to be correlated with the previous or next image in the set dragged onto the droplet? (the settings are picked up from the wrong image in the group)?
    If you make a droplet with that does nothing other than open the raw file, not even save it to a PSD, do the raw file settings change?  In other words does it matter what you’re doing in your droplet for the settings to change?

  • My folders are removed when syncing

    Whenever I sync my Ipad, Iphone or Ipod for updates the folders that i have put my apps into dissapear and I have to put them back into folders again.
    It's very annoying and time consuming.
    How can I stop this?

    I've found out the cause of the problem. The phone settings had changed, so that messages were being stored in the phone memory rather than on the SD card. I have changed this and all of my folders are back again now.
    However, I now have messages stored in phone memory and on the SD card. Is there any way that I can transfer the ones in phone memory to the SD card?
    Thanks.

  • Events from iCal changes when synced with phone :-((

    Hi! I've just bought a bluetooth adapter so I can sync my phone with ical. I'm convinced this will bring me one step closer to a digital synchronized heaven, but (of course) I encountered a problem:
    When I have added an event to my phone (Sony Ericsson T610) and syncs the calendar with my laptop (iBook G4 933 MHz), the event is "postponed" by two hours. For example: I have an appointment with - say - Pamela Anderson from 12:00 to 15:00 which I add to my phone. When syncing with iCal, the event has changed to 14:00-17:00.
    When I add the event to my laptop first, and then syncs it with the phone - the time of the event is set two hours earlier . To take my great example again, the event would then appear to be from 10:00-13:00.
    I've gone through all preferences etc. I can find in both iCal, iSync and on the phone. I've found no help online either... Does anyone have a clue? If so, please give me a hint on what to do, I would be immensely grateful!

    I was convinced that my time zone was GMT, but when I checked it was GMT +2 hrs, which solved my problem! Thank you so much Julian for helping me solve this, I cant wait to start a synced life
    iBook G4 933 MHz   Mac OS X (10.4.6)   640MB RAM

  • Can business area change when we post a clearing document?

    Hi all,
      Is it possible to change the business area when we post a clearing document?
      For example, we need to pay the line item that have business area 3000. Then we use transaction F110 to create a payment then a clearing docuement will be created with business area 3000. Can we configure it to change to Business area 1000 when we do the payment.
      I tried to implement a FI substitution but Business area field cannot be changed(OSS Note 42615). we can do that by changing standard program but it is not recommended by SAP.
      Any idea on how to do this? Configuration, BTE or any user exits? Point will be rewarded for any helpful answer.
    Thanks,
    Chaiphon

    hi raj,
      Could you please explain more about assignment and substitution? did you implement this before?
      I am in doubt because OSS Note 42615 said that GSBER (Business area) must not be substituted. Therefore, if you implement it and there is no problem, I will do the same.
    Thanks,
    Chaiphon

  • Headers are changing when adding a new section between others

    Hi!
    I am compiling a colloquium program. For each lecture abstract, I have made a file with distinct headers. I open the page side tab, click on one page and copy it (Command+C). I click in the main file, in the page side tab, on the abstract which would be before the new one, and paste the new abstract (Command+V).
    The new abstract is neatly pasted after the old one, but the headers are changed : it has the previous abstract headers. Worse, every abstract, whose each is in a distinct section, has this previous abstract header, even if I turned off the «Same headers/footers as before» option!
    Is this a bug? Did I do something wrong?

    I may have found an explanation to this problem.
    When I put a one page document in the master document, every header I had written has been brought back! I think it is a dual page problem here. When the second page of a inserted document (left page) become an odd page (right page), it does not take in account the odd page of the inserted document, but the odd page of the section BEFORE the inserted document.
    Does anyone want to test this?
    Hope it will be fixed soon...

  • Local Storage settings are cleared when workstation is restarted

    When setting the permission to store information on the local computer, the settings are working (it only asks the LSO question once), bu then is being cleared after the workstation is restarted, even though the server is entered into the Website Storage Settings at the url below.  When the workstation is restarted, the server no longer exists in the list.  Does anyone possibly know why it is being removed when restarting?
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.htm l

    I can think of couple of things
    1, if customer is using private mode, exiting browser will clear out  everything.
          This point may not be valid if it happens only after server restart.
    2, settings are stored under flash directory structure, ( not browser cache directory structure), so if for any reason
        Server restart deletes this directory , flash will create directory again,  when visiting  sites.
    It will be interesting to see directories before restart ( if it is there) and after restart if it is there or not.
      directory location for flash settings storage  will be different depending on OS platform.
    3, the settings link  in this email is older version of help .   New settings is different .
        So if there is a mix up in usage, I cannot say anything.
    I can take a look at it if I know more about system, browser , flash plugin etc.

  • Font settings keep changing when I restart Mail

    I've noticed over the past few days that whenever I restart Mail, my font settings keep changing, so I have to keep going back in and adjusting them.
    Anyone else having this problem, or know how to fix it?
    I did a search in this forum, but didn't see anything about this.
    Thanks!

    I should clarify that this happens after I restart my computer, then open Mail. If I close Mail, then reopen it, without restarting, then this does not happen.

  • Project Server 2010 - Once individual settings are changed is there any way to save this down for each person

    A timesheet submitter sets certain filters and "group by", the timesheet is then sorted according to those filters and groups. Once time sheet is saved & Submitted the filters/groups are changed back to the default for any subsequent time
    reporting periods. Is there any way to predetermine the Filter=No filter and Group by=Project for all timeperiods.

    For specific users not possible, however if you know many people use Timesheet in a specific way you might want to  consider generic timesheet view which users can choose.
    Hrishi Deshpande Senior Consultant

Maybe you are looking for