PC soundcard output's division with Y-adapter - possible? & does it affect the sound quali
Does the quality of the signal, quality of sound or power of the signal weaken in anyway if I split one of the soundcard's 3,5mm (/8'') output for two speakers with an 3,5mm Y-adapter?The soundcard is X-Fi ExtremeMusic and speakers connected are S750 Gigaworks. I have an extra set of those speakers and I thought if I'd connect another S750 main unit to get a double subwoofer. I have no intention of connection any of the satellites to the second S750, so just a second sub and it's divided channel signal from the soundcard. I'd be connecting the Y-adapter to the speaker-end of the cable which comes from the soundcard. The cable is?Creative's modified 3x3,5mm/4x3,5mm 7.-cable, aprox. ,8m in length, but I also do have?an Creative's DDTS-00 decoder in between the soundcard and the S750 unit, so make it two times ,8 meters?and in the middle of?those two a?decoder's?separate source switchbox, which is used to alternate the signal to the speakers either from the soundcard or from the external decoder. I truly appreciate all answers and Merry Christmas to everyone regardless of where your from or what size shoes you wear!Message Edited by Atte_84 on 2-24-20060:56 PM
Okay, thank you very much for such an experienced and technically mastered?answer. I appreciated it a lot. I hope you had a great Christmas eve last night! In Helsinki it was beautiful. The central cemetary in Helsinki was an serene experience to visit late in the evening, covered in beautiful waves of lit candles in an otherwise pitch blackness. But here we have a two identical systems to connect, a two S750 main unit. So naturally their impedance values should be identical. As I understand you, the both?would have an?excactly the same?noticeable or mediocre decreasal in the?level of sound volume, or strength of the signal. As the quality of the sound is a huge priority to me, that clearly rules out the useage of such Y-adapter. Right?Is there any other method? Would two X-Fi's run simultaneusly on one PC, both being acti've at a same time sending the identical signals through outputs?
Similar Messages
-
Job Cancelled with an error "Data does not match the job def: Job terminat"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AMDear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid? -
My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?
Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.
-
my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Trying to get the sound working again on my ipad 2. I have a Logitech keyboard case I use with my ipad 2. Last night the sound quit but I don't know why. I've tried everything and can't get the sound back again. Help!
HI there,
There are a couple things you can try. The first thing I would recommend is resetting all settings by going to Settings > General > Reset > Reset All Settings. If that doesn't work, take a look at the article below for additional troubleshooting steps.
Note: The article title impies that it is for iPhones, but the troubleshooting steps are still aplicable to iPads.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope that helps,
Griff W. -
If I charge my laptop with 21V charger, does it affect the device. the original charger 18.5V
Product name is Compaq nx6310
if I charge my laptop with 21V charger, does it affect the device. the original charger 18.5V
This question was solved.
View Solution.Hi,
I would not do this, the variance is acceptable around plus/minus 5%, in this case up to 13%.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How can sync my i pad to my pc with window xp, itunes does not registerer the ipad
how can sync my i pa2 to my laptop window pc with xp and itunes does not see the i pad2
Have you got the latest itunes updated ?
This link might help http://support.apple.com/kb/ts1538 -
Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks
In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu. -
Hi, I Have problem with my ipod 5, what can I do?
It is talking and does not turn the screen with my finger!sounds like a hardware failure. Return the phone to Apple.
-
Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?
For this issue you might try a couple things.
First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
If that doesn't work, you can remove and reinstall iTunes.
http://support.apple.com/kb/HT1923
This article will help with that process. Follow it exactly. -
Problem with entity- set_property. Does not set the value on Save
There is a custom field enhanced in BP_HEAD component in node header structure.
Code to set the property is written in do_prepare_output method. This value gets set with X after BACK from contact details.
I see the value X before Save of the account details. After Save, the set_property does not work and so the value is not displayed.
Please help to explain what could be the reason and how to rectify it.
Note: Before Save, If I select Edit I see the value on the field. If I select Save after the Edit. The value is retained.
This issue occurs only when new account details is Saved.Hi ,
The set_property( ) does not work if the field is non-editable. You have to make sure that you do this operation only for fields which are editable.
Also if you done a set_property( ), make you perform a modify also and there should be a save followed by a commit ( framework does it for you or you do it manually).
* 1. Lock an entity and modify a property
* here booking entity with technical name u2018UIFBokkingu2019
2 Basic Features of the BOL Application Programming Interface
<January 2009> 19
lv_booking = lv_flight->get_related_entity(
u2018FlightBookingRelu2019 ).
IF lv_booking->lock( ) = ABAP_TRUE.
lv_booking->set_property( iv_attr_name = u2018SMOKERu2019
iv_value = u2018Xu2019 ).
ENDIF.
* 2. send all changes to BO layer
lv_bol_core->modify( ).
* 3. get the implicitly created global transaction
DATA: lv_transaction TYPE REF TO if_bol_transaction_context.
lv_transaction = lv_bol_core->get_transaction( ).
* 4. save and commit your changes
lv_transaction->save( ).
lv_transaction->commit( ).
Regards
Kavindra -
Kcnet provides a Hypernet to help with my dial-up service,Firefox doesn't allow the hypernet to work,how can I make this work.
AirPort Express 3 is not actually "extending" the network at all, since Apple's "Extend a wireless network" will only allow the wireless signal to be extended one time or one level.
The trick with AirPort Express 3.....which may nor may not be possible due to your home layout.....is that AirPort Express 3 must be about the same distance from Big AirPort as AirPort Express 1 and 2.......AND......it needs to be closer to Big AirPort than it is to either AirPort Express 1 and 2.
That way AirPort 3 will pick up a stronger signal from Big AirPort and it extend the network correctly. -
I used to be able to post with Craigslist
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Hi, i have an ipod touch that has been locked out. Children were playing with it and now have forgotten the password. I have red screen that says to connect to itunes. itunes won't open because the message comes up saying the ipod is locked with a password. Also, this is not the computer that this ipod was last synced with. Can someone help me open this please. Cheers.
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
I have a new PC with Windows 7 which does not recognize the Solution Center program of the PSC 1401.
I purchased a new pc with Windows 7. I tried to load the HP Solution Center for my HP PSC 1401 printer but
said it was not compatable with the newer Windows version. I had been running Windows XP. Is there a download available to upgrade this program?Hi,
Please use this:
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20PSC...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Premiere Pro CC no longer reading embedded captions
Premiere Pro CC no longer recognizes captions embedded into a Quicktime file using the XDCAM HD 422 50Mbit codec. We created several hundred files using the new Premiere CC - all by attaching .scc data to a Quicktime file using the XDCAM HD 422 50Mbi
-
Apex_collection.add_member not adding all fields
I am trying to add the contents of three page items into a collection, and to verify, I queried the collection for the three fields and output them to other page items. The problem is, only one field returns a value. Background: I set up the collecti
-
How to remove text without changing background
Hey there, I'm having an issue. I need to remove the text saying "A Innland", but the background isn't quite the same at all points - the further right you go, the lighter it becomes. How would I go on about removing this? The text is ingrained in th
-
HI THERE,
-
No Lava plan tree on ASE 15.0.3
We did: set option plancost on set showplan on set fmtonly on exec sp1 We get the text version of plan but no lava plan tree for our queries. We see lava tree for the UDFs used inside queries although. Wanted to know estimated cost on each branch. An