PC Suite 4.88 - WIN XP SP2

Hi,
I have a Nokia 6310i.
I have downloaded PC Suite 4.88 and tried to install it on a PC with Win XP SP2.
I get an error message saying that the .exe file is corrupted.
I have since been informed that PC Suite 4.88 will not function with Win XP with SP2.
Is this correct, and if so, is there another way to sync the 6310i with my PC ?
Best regards
LH Larsen

Hi Gforce!
Welcome to the Nokia Discussion boards!
Unfortunately PC Suite 4.88 is not compatible at all with Windows XP SP2. However you can use the latest version of PC Suite, 6.6.18, for some of the functions.
With version 6.6.18 you are limited to using the sync function and the backup/restore function.
If you would like more info on PC Suite you can find it here: PC Suite Homepage.
Cheers
Karim

Similar Messages

MiniSAP Navigator Problem Win XP SP2

I am using the SAP Mini Basis System to practice ABAP programming. My problem is that in the Object Navigator, the Object List Selector is not displayed. This problem was already described here in an earlier discussion.
I am using Win XP SP2, SAP GUI 6.20 (from Galileo Press book ABAP objects). Is there an other patch around? My problem is that I cannot download from SAP Service since I am not a customer. Any help would be appreciated.
The original topic is
Re: Object Navigator

Everyone,
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Thats the GUI update patch. That works.
Install it. Reboot PC and restart miniSAP. Use new shortcuts created and enter new host in SAPlogon.
You should be fine,
Any issues, I can walk you through the process.

Problems with wireless mouse in win xp sp2

I recently installed Windows XP2 in a Bootcamp 3.0 partition on my iMac 27". After installing the Apple drivers from the Mac OSX disk everything seems to work fine except for the Magic Mouse which does not respond at all. A wired USB mouse works fine, and, strangely eonough, when I access the Bootcamp partition through VMWare Fusion 3.0, the Magic Mouse works fine.
I tried uninstalling and re-installing the Apple drivers but that didn't work. When I look in Device Manager in Windows, under Bluetooth Radios, there is a Microsoft Bluetooth Enumerator at Location:Apple Wireless Mouse and an Apple Wireless Mouse at Location:0. Could this be causing the conflict? I tried uninstalling the Microsoft Bluetooth Enumerator but it gets automatically re-installed at the same location when I reboot Windows.
Any suggestions on what I can do?
Thanks in advance
Javed Shakoor

Hi Stefan,
Thanks for your response. As you advised I set a System Restore point and installed Bootcamp 3.1. After I restarted the computer, the message "Found New Hardware: Apple Wireless Mouse" appeared briefly above the task bar, then it disappeared. The usual message which comes after this, telling you that the new hardware is ready for use, did not appear.
And whats more important, the wireless mouse still refuses to work!
When I go to Bluetooth Devices in the Windows Control Panel, the Apple Wireless Keyboard is shown as connected, but there is a "macbook 1's mouse" in the list which is not shown as connected.
As I said earlier I am still running on Win XP SP2. I am wondering maybe SP2 doesn't work with the new Apple wireless mouse. Do you think I should set another System Restore point and upgrade to SP3?
In the Windows Device Manager, under Bluetooth Radios, there are two devices:
1. AppleBroadcom Built-in Bluetooth at Location 0 (Bluetooth USB Host Controller}
2. Microsoft Bluetooth Enumerator at Location on Apple Broadcom Built-in Bluetooth
Both these devices are shown as working properly. However, does it seem to you there is a conflict there?
Thanks for your help so far, and apologies for the long list of questions.
Javed

SCOM 2007 server OS upgrade from 32 bit Win 2003 SP2 to Win 2008 R2 64 bit

Dear Experts,
We are planning to upgrade where in SCOM 2007 R2 presents on 32 bit Virtual Machine Win 2003 SP2 to Win 2008 R2 32 bit or 64 bit. Though OpsManager Database is already upgraded to SQL 2008 R2 from SQL 2005. So No pblm with DB upgradation.
So my point is If I go ahead to upgrade from Win 2003 (SCOM 2007 R2 resides) to Win 2008 R2 does it create any impacts on SCOM 2007 R2 environment ? Please let me know the procedure for this or any documentation is available to complete this.
Thanks in advanced!
Saravana Raja

Firstly,
Please note that you can only upgrade an OS to the same architecture (i.e. from x86 to x86, and not to x64). See the following Support Article about supported upgrade paths for Windows Server 2003: https://support.microsoft.com/kb/951041?wa=wsignin1.0.
Therefore, if you plan to upgrade to a x64 architecture, you will need to perform a new installation, and not an in-place upgrade. If you are going that route, I'd suggest skipping Windows Server 2008 R2, and try to push to Windows Server 2012 if not Windows
Server 2012 R2; to more future-proof your environment.
Further, If you are going to perform a new OS installation (to move into x64 architecture), why not also utilize the "new installation" requirement in that scenario to also upgrade to System Center 2012 R2 Operations Manager?
The base scenario would be for you to perform an in-place upgrade of Windows Server 2003 x86 to Windows Server 2008 R2 x86. Except, there is no x86 version of Windows Server 2008 R2, only x64! Note: Windows Server 2008 (without the 'R2') has an x86 option.
--- If you found this post/reply helpful, please visit my personal blog for more helpful articles. --- AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud) LinkedIn: http://ca.linkedin.com/in/adinermie Website: http://AdinErmie.Wordpress.com

Flash player v10.0.12.36 & IE7 Win XP SP2

After latest Flash Player update (10.0.12.36) I cannot load
any flash content using IE7 Win XP SP2
Result on this page
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
is this message - "
This movie displays the version number only for Flash Player
4.0.12.0 and later."
Any ideas ?
Thanks

you don't have a flash player installed. retry installing the
player.

Graphic card prob on PM8M3-V using Win XP SP2

Hi guys, i having a problem wif my GC using win XP SP2 on MSI PM8M3-V. I'm using Geforce 2 MX 400 AGP 4X, 512 DDR 400 and 40 GB WD ide hardisk. Last time when i'm using win XP SP1, it work jus fine but only when the correct driver version install. When i check the graphic card information on the nvidia driver, it shows the bus as PCI instead of AGP 4X. This one cause no prob to my PC but when i using the newer driver version, it shows AGP 4X but this one makes my PC hang a while and blue screen of death come out and then my PC restart when i trying to access to video file. Same prob happen to Win SP2 even when i use the correct driver version. The built-in VGA works juz fine but it sucks in games. Can someone help me wifth this prob? Thanks

Hello!
I don't completely understand, but you can relax a bit. DeviceManager calls the graphics card PCI even if it is AGP. Used to worry me too, I can tell you.
Hope the on-board card is disabled in BIOS.
Can you tell us please what processor and what Power Supply Unit you have got?

Is OBIEE 11g compatible with win 2003 sp2 64 bit OS

What is the difference between software only installation and enterprise install? Our company has win2003 sp2 64 bit OS on the server. Is it compatible to OBIEE 11.1.5 g.
Thanks,
Sushil

Hi,
There no compatible with win 2003 sp2 64 bit OS, you can install.for more refer BI Certification Matrix:
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
Simple Install :- Demonstration and Evaluation for Single-User Development .
software only install means it installs only the BI components not all the BI domain comoponents like java tools
Enterprise install :-Enterprise Deployment for Hosted Development and Production (this type enables you to specify several more configuration settings than the simple
FYI...
Software only install refer my blog and installation steps for Enterprise Installation
have a look for 4.5.2.3 Enterprise Install Procedure for New Installations on
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c4_installing.htm#CEGIAGBC
For diff between Simple and Enterprise Installations?
Refer: http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c2_scenarios.htm#CHDHFGEI
Thanks
Deva

Acrobat Suite 1.0 WIN ESD WWE

How do i download Acrobat Suite 1.0 WIN ESD WWE?
It is is registered on the LWS adobe login section. it is failing for me.

what exactly is happens ?
Error message?
your OS?

Hal.dll error during/after Win XP SP2 installation

At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
HDD1: OSX
HDD2: free
HDD3: OSX Data (raid 1)
HDD4: OSX Data (raid 1)
The setup I'd like to have is:
HDD2:
(1) Bootcamp-Partition (NTFS ~75GB)
(2) Bootcamp-Scratch (NTFS ~150GB)
(3) Scratch (HFS+ ~250GB)
I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
(1) Scratch (HFS+ ~250GB)
(2) Bootcamp-Partition (NTFS ~75GB)
(3) Bootcamp-Scratch (NTFS ~150GB)
Same error.
Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
Hope that helps you........

Help me in e-business Suite R.12 installation on Win XP SP2

hi all...
i have selected "EBS for windows 32-bit" as my final year project development tool and now i am facing difficulties in installation.
the steps i have done are as follows...
1. Installed ActivePerl 5.10.0
2. Installed Cygwin and replaced the following files
=>gawk.exe to awk.exe
=>make.exe to gnumake.exe
=>deleted gcc.exe(shortcut) and cc.exe(Shortcut)
=>grep.exe to egrep.exe
=>gcc-3.exe to cc.exe
=>deleted cc-3.exe
3. Installed MS VC++ Standard Edition (In a folder named "VC6" with "Register Environment Variables" checked and it contains two folders then named as "Common" and "VC98") and copied link.exe to C:\system32
4. Added DNS Suffix in Computer\Properties\Computer Name\Change\More"
5. Set My ip to "192.168.1.52" and connected to a PC with ip "192.168.1.53"
6. Set both PCs Subnet Mask to "255.255.0.0"
7. Added Path of "C:\cygwin\bin" and "C:\VC6\VC98\bin" to "Computer\properties\advanced\environment variables\path"
8. Did Staging Successfully
But when i run installation then it passes all the pre-Checks and there is an error at the "99%" of phase "1" of "5" with the error messages as
=>Cannot add user to Application Access ACL
and
=>Cannot add user to Application Launch ACL
and
=>No mapping between Account Names and Security Ids was done
I am running Installation with Default Administrator Account ...can anybody help me out of this As soon as possible....I can provide with the log files of installation......Thanks in Anticipation...

Hi,
its just a package i have with the name MS visual C++ 6.0 standard edition You should not use Microsoft VC++ 6.0 as it is NOT supported with R12.
and i didn't installed MS visual studio separately...You can either go with MKS or Cygwin, so if you have installed latter it should be OK.
this error appears in a command prompt window which just shows up for a very little time and on the gui , there comes up a pop up window which states something like "error running external process" and it has only two options "Abort" and "Retry" and after retry the problem is the same....Please post the complete error message from the installation log file.
are the cygwin files correct that i am replacing and deleting?what do you mean by replacing and deleting?
....I hope you will help me to get out of this problem...and i read your post and you told to install loopback adapter and i previously tried installation with the steps told by you and it also generated the same error so i didn't installed the loopback adapter this time...I believe the error is irrelevant to the loopback adapter. Anyway, please post the complete error message from the log file so we can suggest something to resolve the issue.
Regards,
Hussein

Install of nokia suite 6_86_9_3 on Win XP (Japanes...

Tried to install nokia suite on japanese version of Win Xp on Toshiba DynaBook. The install fails.
It produces an error message after some time effectively stating that "can not install on this operating system".
I have tried both english and japanese version of the suite. Same problem. :-(
Can anyone advise what is that the suite does not like and what can be doen about that. Cheers.
Phone model used to download suite was: 6230i.
Message Edited by pp3204 on 01-Jul-2008 02:30 PM

Kindly check your system has the following requirements on your PC
At least 250 MB of free disk space
• One of the following operating systems:
• Windows Vista 32-bit and 64-bit editions
• Windows XP Professional x64 edition (Service Pack 2)
• Windows XP (Professional or Home Edition) (Service Pack 2)
• Windows 2000 (Service Pack 4)
• Administrator rights to the PC to install software on it
At least one of the following connection sets
• USB connection cable (DKU-2, DKE-2, CA-53, CA-70 or CA-101) and a compatible port on your PC
• Serial connection cable CA-42 and a compatible port on your PC
• Infrared (IrDA) port on your PC
• Bluetooth wireless technology equipment and software
Bluetooth wireless technology equipment compatible with one of the supported Bluetooth stacks listed below::
Windows Vista 32-bit and 64-bit editions:
• Microsoft Windows Bluetooth stack
• WIDCOMM Bluetooth stack, driver version 6.x
• Toshiba Bluetooth stack, driver version 5.10.12
• IVT BlueSoleil Bluetooth stack, driver version 5.0.5
Windows XP x64:
• Microsoft Windows Bluetooth stack
• Toshiba Bluetooth stack, driver version 5.10.12
• IVT BlueSoleil Bluetooth stack, driver version 5.0.5
Windows XP:
• Microsoft Windows Bluetooth (only in Service Pack 2)
• Toshiba Bluetooth stack, driver version 4.0, 5.0 and 5.10.12
• WIDCOMM Bluetooth stack, driver version 1.4.2.18, 3.x, 4.x and 5.x
• IVT BlueSoleil Bluetooth stack, driver version 2.x, 3.x and 5.0.5
Windows 2000:
• Toshiba Bluetooth stack, driver version 4.0, 5.0 and 5.10.12
• WIDCOMM Bluetooth stack, driver version 1.4.2.18, 3.x, 4.x and 5.x
• IVT BlueSoleil Bluetooth stack, driver version 2.x, 3.x and 5.0.5
Note: Available Bluetooth technologies and their versions may not be supported by your Nokia mobile device. Check your Nokia mobile device user guide for further details about compatibility with the listed Bluetooth technologies.
Note: To check which Bluetooth stack your PC has installed: in the Nokia PC Suite main window, click Help > About Nokia PC Suite…> Show System Information dialog. If the Bluetooth stack found on your PC is not supported by Nokia PC Suite, this is also mentioned in the system info.
Please let the forum know the exact details about your PC ????

How to Run Oracle DeveloperSuite 10g on Internet Explorer 8 in Win XP SP2

I am using windows XP SP2
I am using Developer Suite 10g
I can run form in Internet Explore 6 but I can't run it in IE8 or in Mozilla Firefox 3.6
How can i run form in IE8 or MF3.6.
I need your help.
Thanks
Zico

And this has what to do with installation/upgrade/environment/migration of WebLogic Server?

Installing Creative Suite 5.5 - Win 7 - Second Disk WONT LOAD!!

Have Win 7. Trying to install master creative suite 5. First disk does great up to 51%...then it asks for disk 2. It just repeats itself...asking for disk 2 forever. I used disk 2 to just load photoshop last week...worked OK. Put disk 1 back in as an attempt...rebooted and reinstalled as an attempt.
Whats UP? How can I load in Master Suite with 2 double layer disks?
Thanks

This forum is to discuss the forums, not products
You need to ask your question in the forum for the Adobe product you are using
How to Select a Forum http://forums.adobe.com/docs/DOC-1015
OR
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
OR
Forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Chat http://www.adobe.com/support/download-install/supportinfo/

Flash CS3 crash at start up on Win XP SP2

i have terrible problem. Got my CS3 design premium few months
ago. I have started with no activation and used all the software
with no harm - also flash. I needed to reinstall the system anyway
(for other reasons). After system reinstallation Flash suddenly
stopped to start up. it crashes when the red welcome red screen is
beeing shown on 'initializing fonts' stage or right after it ...
then for a very short glimpse the main frame appears and all
dissapear leaving no errors in Win logs. I have been searched thru
internet to try find a solution. i have found those such as
uninstallling QuickTime and Flash Vid Encoder, checked the corrupt
fonts... i was installing and uninstalling the suite endlesslly...
nothing helped. of course i had my work deadline, so finally I
decided desperately to reinstall the system again and install all
the Suite software to clean system. So did I.
Suite has been installed, tried Flash and what made me very
happy, flash has started up with no harm... my happiness lasted
very short untill windows has downloaded and installed its updates.
After downloading Flash started to behave as before (crashing at
start up).
Adobe support seems not support anyone... i have called them
thousand times and they only could give me silly advices as install
and reinstall suite again. If anyone has the idea what is the
reason and knows the fix, I beg for help.. i will be very thankful
as my work is totally blocked now.

If a program crashes on startup - specifically when it is
trying to initialize fonts - then in
almost all cases it is a corrupt font. Remove all non-system
fonts and try to launch flash again.
If it starts up then you will need to reinstall each font,
start up flash to see if it is the one in
suspect.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
raster net wrote:
> i have terrible problem. Got my CS3 design premium few
months ago. I have
> started with no activation and used all the software
with no harm - also flash.
> I needed to reinstall the system anyway (for other
reasons). After system
> reinstallation Flash suddenly stopped to start up. it
crashes when the red
> welcome red screen is beeing shown on 'initializing
fonts' stage or right
> after it ... then for a very short glimpse the main
frame appears and all
> dissapear leaving no errors in Win logs. I have been
searched thru internet to
> try find a solution. i have found those such as
uninstallling QuickTime and
> Flash Vid Encoder, checked the corrupt fonts... i was
installing and
> uninstalling the suite endlesslly... nothing helped. of
course i had my work
> deadline, so finally I decided desperately to reinstall
the system again and
> install all the Suite software to clean system. So did
I.
> Suite has been installed, tried Flash and what made me
very happy, flash has
> started up with no harm... my happiness lasted very
short untill windows has
> downloaded and installed its updates. After downloading
Flash started to behave
> as before (crashing at start up).
>
> Adobe support seems not support anyone (at least polish
banch)... i have
> called them thousand times and they only could give me
silly advices as install
> and reinstall suite again. If anyone has the idea what
is the reason and knows
> the fic, pls help.. i will be very thankful as my work
is totally blocked now.
>

Satellite Pro 2100: Quick fix don't work with Win XP SP2

the quickfix drivers for win xp on my toshiba satellite pro 2100 doesnt work saying the drivers needs xp without service pack2.
Are there any drivers for winxp service pack 2?

Hi
The quickfixes (QFE's) are small Microsoft applications which close some security openings in the Microsoft products.
You can install such updates either automatically if the windows will search for updates or you can do it manually from the Microsoft site.
I think you have tried to install not QFE's but drivers which are not compatible with SP2.
Please take a look into the Microsoft Windows XP SP2 Update information which is available on the Tosh page and follow the guide lines

PC Suite 4.88 - WIN XP SP2

Similar Messages

Maybe you are looking for