PC Suite 6.81.13 does not see my BT adapter 6.70.2...

I'd upgraded to 6.81.13, but i can't choose for a bluetooth connetion. After downgrading it won't work either. I have to use the cleaning tool en reinstall 6.70.25 before it sees my adapter again. Does it sound familiar to anyone??
I use a MSI adapter

17-Sep-2006
06:45 PM
erik1234 wrote:
I'd upgraded to 6.81.13, but i can't choose for a bluetooth connetion. After downgrading it won't work either. I have to use the cleaning tool en reinstall 6.70.25 before it sees my adapter again. Does it sound familiar to anyone??
I use a MSI adapter
I suggest to remove both versions now, reboot PC and install new version. I had the same - forgot to remove old and BT didn't worked.
Nokia 5800 History (yy-model): 95-450; 97-3110; 97-8110i; 98-6110; 98-5110; 99-7110; 01-T29 (ERICS); 02-6310i; 04-SE; 06-E70; 08-5000; 08-5800..

Similar Messages

Nokia Suite does not see saved messages

Hi! I transferred a part of the messages in my Nokia 6303 to phone' s folder Saved Messages, and since then the troubles began.
1. I can not move any sms out of the Saved Messages folder, for example, it is not possible to send them back to Inbox folder or any place else.
2. Nokia Suite does not see some of those saved messages- they appear as empty boxes there, despite I can read them on my phone.
Can I restore all messages downloaded to Nokia Suite, making them readable?
How can I move the sms from Saved Messages folder on my phone?
Can I tranfer sms from Saved Messages folder of my Nokia 6303 to another phone (even not Nokia)?

Hi Nicksimper,
Welcome to the Nokia Discussion boards!
First could you do a soft reset on your phone by entering *#7780# into your phone’s keypad. The default password when prompted is 12345. This reset will NOT erase any data, but revert settings back to original. Also, ensure you have the latest firmware by visiting this page and the latest version of PC Suite by following this link here.
The following link provides extensive information for managing your messages on Nokia devices using Nokia PC suite.
In order for you to move messages out of the “Saved messages” folder, you will have to create a new folder in the same directory, but you will not able to move messages back into your inbox. To move your saved messages to another non-Nokia device, you can forward the messages via SMS.
Hope this helps and let us know how it works out.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Purchased the master suite and premiere pro does not open

purchased the master suite and premiere pro does not open

Mac or Windows, and exactly which version of the operating system... which version of Master Suite (CS5 or CS6 or ???) and what error message do you see?

Nokia Music does not see my Nokia 5310

Hey guys I brought a Nokia 5310, been having Issue's with it.
When I plug in the phone I select Printing and Media, The PC see#s it and tells me it has connected. I can see the handset in My Computer and have full access to it, if i look on Nokia PC Suite it see's it but says it's in a un supported mode and if i click transfer music it finds the device. The only thing that does not see the device is Nokia Music it's self. For security reason's I run my profile as a limited account instead of a full access account, if i load up the admin account and then Nokia music it see's the device but I have no DRM's so can not transfer my music. If i run Nokia music on the normal account but right click and run as admin it still does not work. It was working but has suddenly stopped
I have uninstalled and reinstalled Nokia Music, I have uninstalled and reinstalled the device and I have checked settings everywhere and still don't know what to do.
Any Idea's?
James.
running Windows Vista 32bit Business fully patched up

I have realised that when I plug it in when logged on as admin i can transfer music to the phone and it plays fine however I can't play it on the admin account only on my normal account, so this is kinda half resolved that I can transfer my music using one account but not resolved because i have to swap accounts each time
O well, still any help in getting it resolved would be great!

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!

My computer does not see my printer

Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?

Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle

My mac does not see my printer

my mac does not see my printer

Is the printer physically connected to the computer with a cable, or is it wireless. Did you install the printer drivers from the manufacturers web site, for your specific OS?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

After upgrading to Mavericks my iMac does not see Sony camcorder in iMovie anymore. It still works on MacBook, so nothing wrong with camera or connections.

After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkom

Try this

HT201302 I have a large video on my ipad that I would like to transfer to a computer. But my computer (using various software that came with Windows 7) does not see this video, although it sees all the other videos on my ipad. This video is too big to t

I have a large video on my ipad that I need to transfer to my PC (a window 7). I could also use a windows 8 if that would help. But all of the applications I have tried do not see this large video (52 mins) even though they transfer smaller videos fine. The ipad will not let me trim the video, saying it is too large. This is true even though I only want to trim the original, and not create a new video. (Actually it refuses before it gets to the choice of creating something new or just eliminating something from the original). I have been to an Apple store, but the people there only could recommend that I try some alternate applications to do the transfer (Kodak EasyShare). I don't have much faith this will work. I think I have this application on an old PC, and it is not something I want on my new computers.
Is it possibled the size of this video just violates the transfer formats for files over USB? If so, I will just delete the video and move on. But the video is really something I wanted to save. I would be happy to eliminate most of the video, but the ipad will not let me trim it.
I also tried to import the video with Windows Moviemaker (free with W7). It also does not see this file, but works fine on the other videos on the ipad.

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
 Cheers, Tom

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

Itunes does not see ipod touch

Upgraded Itunes11.0.0.163 for Windows 7 64 bit. Running on Asus Laptop. Windows 7 Ultimate 64 bit.
Itunes does not recognize ipod toch Gen 4 updated to ios 6
Totally uninstalled and manually cleaned all itunes software several times.
Reset iPod touch offline several times.
Updated iPod touch driver.
WIndows ses the iPod as portable device, iTunes does not see it.
Any ideas on why I can't use iTunes with my touchi? Has anyone hadluck with non apple softyware, seems apple has made a mess of itunes on this version. I've been throught multiple threads on reinstalling and with tweaks. I've read the apple device is faulty in this latest version, any news on when this fault will be fixed? Love to hear from an Apple person on this. Samsung is looking more and more attractive.

See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

ITunes 11 does not see my iPhone

I installed iTunes 11 with software-update and got an error-message (see screenshot, german), nevertheless it was updated.
It works fine, but it does not see either my iPhone or my iPad in the list on the left side. There are no devices ...
Thanks for help ...

And suddenly, after 2 restarts, it´s there.
Problem solved. No idea why it works now.

PC Suite 6.81.13 does not see my BT adapter 6.70.2...

Similar Messages

Maybe you are looking for