PC Suite 6.82.22.0 Doesn't Detect Nokia Communica...

Operating system:
Microsoft Windows XP
Build 2600
Service Pack 1
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.82.22.0
Language: English
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Version 6.43.9.0
Bluetooth stack:
WIDCOMM Bluetooth stack
Version 4.0.1
Build 2500
Above information as requested. My 9500 Communicator is running V 05.22(01) 03-06-2005 RA-2 as per *#0000# command.
I have installed the above version. I have uninstalled it. I have run the Nokia Register cleaner. Re-installed it. The software takes an age to start. I have requested that it open on start up. This ignored. If I click on any of the icons then nothing happens.
Any suggestions.

Surely the first problem is that the suite doesn't recognise the phone. I have now installed the suite on another laptop, this one running windows XP SP2. See below
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.82.22.0
Language: English
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Version 6.43.9.0
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 4.0.1
Build 2500
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
This appears to work fine. The Get Connected icon works straight away and I have the used the back up and internet access icons.
The difference appears to be that SP2 has the Microsoft BT stack. Does the Suite take this as the default?

Similar Messages

Nokia Suite doesn't detect Nokia E62

I tried to connect my Nokia E62 with the usb to my comp and I can not get it to detect it. It keeps asking for the driver. I installed everything. I am using Motorola SKN6371C usb cable which I was told was suppose to work. Is this the problem?

Nokia cables will work definitely with Nokia PC Suite, because the necessary drivers are bundled with the software. That's why when you're connecting a compatible Nokia cable to PC Suite, you will see a little message during the set up process that states it's installing drivers.
Based on your description, your Motorola cable will need to have the drivers installed first before installing PC Suite. I suggest you check with Motorola or go to their website to see if they provide the driver file for download and install that before you re-install Nokia PC Suite after uninstalling it like radical24 said.
Just bear in mind, it may not work since you're not using a recommended cable. Can try though.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post!

How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?

How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?
I had to wipe my hard drive including my apps and I don't know how to reinstall my adobe software.
Please help

Download and Installation Help -
https://helpx.adobe.com/download-install.html
You will need your serial number. If you have the discs you should be all set. If not, then you should be able to find it thru your Adobe account online if you registered the software previously.
You might want to contact Adobe Support thru chat before you activate the new installation if you would like to free up the activation that might have been left in limbo.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Ovi Suite doesn't detect Phone

Well I have N97
Used to have problem 'USB phone parent' driver couldnt be instaled - Just done PC suite cleaner and fixed that problem.
Now its installed driver wise, so 'My computer' sees N97, and phone says its in PC suite mode BUT
Ovi suite doesn't detect it. I tried 'add new device' it still didnt find it.
I can browse it fine through my computer.
And before you say - yes phone is in PC suite mode.
I also just did hard reset of phone

Please follow the steps provided below and check.
Uninstall the following from add/remove
- Nokia Ovi Suite
- Nokia Connecting cable driver
- PC Connectivity Solution
Then go to device manager ( Right Click My Computer-Manage) then ports- Uninstall all the ports which is by name nokia (
there might be multiple entries, but remove them), but please dont remove any other from there which might lead to
malfunction.
- go to C:\Documents and Settings\All Users\Application Data\OviInstallerCache and remove all the sub folders inside that.
For windows vista and windows 7 it will be C:/Program Data/OviInstallerCache
- Restart Computer
- Download and install ovi suite
- Restart computer
- Then connnect the device and wait till all the drivers are downloaded.
- Then launch Ovi Suite connect the device.
This has solved the issue in many cases.
Hopefully this works.
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

javigomez88 wrote:
I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers.

HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

What is apple doing. This macbook pro doesn't detect external display, doesn't detect my wacom..

This is awsome. Cant work on this laptop... Doesn´t detect nothing.

Hey there mrlrsm,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that may help you resolve the issue with your MacBook Pro no longer recognizing the external display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Ciao,
-Jason

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones.

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones being plugged in after I installed Mountain Lion. If I reboot, it works but after a few unpluggings and more plugins, it doesn't detect them anymore until I reboot. Help please.

This may or may not fix your problem.
Try a NVRAM reset.
Try a SMC reset.
If neither work, you're just going to have to take your unit into your local Apple Store or AASP and see if you've a hardware issue.
Good luck,
Clinton

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

MacBook Pro doesn't detect tv as display.

MacBook Pro doesn't detect tv as display when connected via Mini Display Port to HDMI adapter.

Hi l,
Is it possible to try another adapter? There have been a number of posts here about faulty adapters. Also, have you checked in Display Preferences? Selected the proper input on the TV?

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

Disc stuck in disc drive but computer doesn't detect disc

I put it in and it's stuck, and I tried a bunch of methods, but the computer doesn't detect the disc and I can't get it out. Help please!!!!

   If you have not tried any of these steps, try it.
   1. Restart the computer and hold the trackpad down.
   2. Launch iTunes and eject from there.
   3. Launch Terminal.
    Applications > Utilities > Terminal
    Type in   drutil eject internal
   Press enter.

IMac Doesn't Detect Headphones

I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
Resetting the SMC only provides this kind of support:
-Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
-Handling system resets from various commands.
-Controlling the fans. so I doubt it can fix the audio issue.
Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
Carolyn

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Good Morning Denise -
Sorry to hear you are having issues connecting to your Wi-Fi network. I'll include a few more things that you can try to troubleshoot this below. The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)? That would be one of the first things to try.
Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything. Hopefully, one of the steps below will help you with this.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Restart.
For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
• Restart your iOS device.
• Unplug your router and plug it back in.
• Unplug your cable or DSL modem and plug it back in.
Still can’t connect?
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Get more help
Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
http://support.apple.com/en-us/HT202068
All the best,
- Judy

PC Suite 6.82.22.0 Doesn't Detect Nokia Communica...

Similar Messages

Maybe you are looking for