PC Suite 6.83 and cable connectivity failure

hi,
i have just upgrade my pc suite software to 6.83 version. However i could not connect via cable.
im using nokia n91, cable dku-2. Im using windows xp sp 2.
what have i done so far:
tried to reinstall the cable dku2 software alone, but not successfull as it says it couldnt remove the previous one, i have uninstall the pc suite 6.83 as to download the cable driver itself, although i have turn off my antivirus, windows firewall, deleted the registries, im still unable to install the cable itself.
When i Checked from Control Panel --> System --> Hardware --> Device Manager that exclamation marks are visible on the wirelss communication heading. i have reinstall the pc suite sofware 3 times now, and the problem still occuring. Please help. Thank you.

Hi,
You wrote:
When i Checked from Control Panel --> System --> Hardware --> Device Manager that exclamation marks are visible on the wirelss communication heading
-> Uninstall all those wireless connection points (also from Modems and Ports) then reconnect then phone... does it help?
And does it install those back (and is there any errors)?

Similar Messages

  • PC Suite - no USB and Serial Connection Type avail...

    I have been trying to solve this problem for days now. I have Windows XP and Nokia 5310. After I installed Nokia PC Suite, there is no USB or Serial connection type in the Connection Manager; it only has Blue Tooth and Infrared conection available. I have install and uninstalled PC suite and used PC Suite Cleaner to clean the installation. I also went into the add and remove program in the control panel and click on "change" to fix the Nokia Connection Manager and Nokia Connectivity Cable Driver. It still didn't work. The thing is that the first time when installed PC Suite on my laptop, it did have USB connection option. Later after uninstalled PC Suite and reinstalled it, it start to have this problem. I am extremly frustrated. Can anyone help please?

    Thanks for your reply. I have solved the problem by following your instruction below:
    Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
    Download and run Nokia PC Suite Cleaner
    Reboot your computer
    Download and install PC Suite here.
    Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
    Maybe when I uninstalled Chinese version of PC suite, the order in which it was uninstalled was not the one you suggested above. So，I followed your instruction and uninstall order to uninstall PC Suite again. I also uninstalled all the antivirus, spyware, and firewall before I reinstall the PC Suite. It worked; then, I reinstalled all the other security software again after I had reinstalled the PC Suite. Although it worked, I still didn't know what exactly cause the problem the first place, PC Suite version, Security protection software, or the order which it was uninstalled? All it matters is it's working.

  • PC Suite 5.8 and phone connectivity.

    Hi,
    I have installed PC Suite V5.8 and have a CA-42 cable with a 6021 phone on XP SP2.
    I run connection manager, plug in the phone and it appears. I go to advanced and select Com4. I have Content Copier running as well and as soon as the phone has been added it appears in the Phone Selector on Content Copier. However it is greyed and when selected, you can't press OK as it is greyed out.
    As it is seeing the phone, I don't understand why I can't use it, any suggestions ?
    Thanks, Graham.

    The latest version is pc suite 7. You can download here: http://europe.nokia.com/A4144909 to check if it works for your 6021.
    What's the law of the jungle?

  • N95 Cable connection failure

    When I tried to update, I found that my N95 could not get connected to notebook.
    From the PC Suit - "Get Connected" - "Select Connection Type" then "Connect Cable" it stops and stays there.
    I remember some days ago before I reset the phone, I upgraded the firmware (actually from v20.0.015 to the same version) hopefully it will repair the installed firmware.
    During the upgrading process I got electricity black out, and then I have never been able to connect by cable, even after being reset and re installed.
    That's why I still can not update the firmware.
    What should I do to solve this silly problem?

    Hi oly730
    Perhaps try going to Control Panel > Add/Remove Programs > PC Connectivity Solutions > Repair installation
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • ISE 1.1.1 and AD connect failure

    Hello,
    I'm trying to join ISE to my AD. i have a linux vm as my time source for both AD/DC ( a vm) and ISE(actual appliance), both have sycn and time is the same on ISE and AD. I've opened all the ports and took off NAT between the two.
    i get a successful join message, then it says "joined to domain but not connected"
    i've turned off the windows firewall just in case.
    in ISE i see:
    base.bind.cache can't resolve LDAP service provider for test.com, check DNS
    base.bind.healing disconnect reconnect failed
    osutil module=LDAP SASL bind to ldap/[email protected] GSSAP mechanism with LDAP error invalid credentials
    network.state favorite DC marked as dead
    but i see other information that is being pulled from the domain correctly.
    everything is in DNS.
    any clues?
    thanks

    I recently ran in to this issue and here is what I did :
    Did a "netstat -a -p tcp" on the Windows domain controller. Saw that Port 389 (LDAP) wasnt enabled (not sure on why this happened however). Got in to Windows services console (services.msc), "Stopped" and "Started" the "Active Directory Service". Checked with netstat to see if the port was open now, it was. I did a test from ISE and later "Joined" the AD, it turned successful!
    Other options to look for:
    Its evident that this errror corps up when ISE has problem with the LDAP service. So to resolve this, here are somethings to look at/do :
    (1) Check connectivity between the ISE and the DC.
    (2) Check if ISE can resolve the DC name (from the CLI mode)
    (3) Check if the NTP is set properly on ISE (Administration -> Settings -> System Time)
    (4) Check if port 389 (LDAP) is open on the domain controller.
    (5) See if a router/Firewall is blocking the LDAP port
    The "Detailed" test under "Test Connection" from ISE gives verbose information about the failure cause.
    -Hari

  • Weblogic8.1 and mysql connection failure, please help

    Pardon me for repeating this topic. I have spent 2 days on this but still ended
    up with failure.
    The similar configuration works very well under wls7.0.
    It should not be a problem of jdbc driver or its classpath setting, since the
    system console say "successful..."
    But when I try to access jsp and servlets, it always throws execeptions. All projects
    run successfully under wls7.0 don't work.
    Please give me some advice, thanks in advance.
    The following is my connection pool setting found in config.xml:
    <JDBCConnectionPool DriverName="com.mysql.jdbc.Driver"
    Name="MySQLConnectionPool" Password="{3DES}aMsyd4ZSbSg="
    Properties="user=root" Targets="cgServer" URL="jdbc:mysql://localhost/userdb"/>
    <JDBCTxDataSource EnableTwoPhaseCommit="true"
    JNDIName="MySQLDataSource" Name="MySQLDataSource"
    PoolName="MySQLConnectionPool" Targets="cgServer"/>
    The screen shot of the exceptions is as below:
    <2003-8-21 ÏÂÎç17ʱ14·Ö08Ãë EST> <Notice> <WebLogicServer> <BEA-000355> <Thread
    "ListenThread.Default" listening on port 7001, ip address *.*>
    java.lang.NoClassDefFoundError: weblogic/jdbc/wrapper/PoolConnection
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    3)
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
    ClassLoader.java:476)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
    Loader.java:181)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
    at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:223)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:217)
    at weblogic.utils.classfile.utils.CodeGenerator.generateClass(CodeGenera
    tor.java:71)
    at weblogic.utils.wrapper.WrapperFactory.generateWrapperClass(WrapperFac
    tory.java:331)
    at weblogic.utils.wrapper.WrapperFactory.getWrapperClass(WrapperFactory.
    java:167)
    at weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactor
    y.java:66)
    at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:242)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:158)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:444)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    <2003-8-21 ÏÂÎç17ʱ14·Ö42Ãë EST> <Error> <HTTP> <BEA-101017> <[ServletContext(id
    =2960804,name=forum,context-path=/forum)] Root cause of ServletException.
    java.sql.SQLException: Cannot obtain connection: driverURL = jdbc:weblogic:pool:
    MySQLConnectionPool, props = {enableTwoPhaseCommit=false, jdbcTxDataSource=true,
    connectionPoolID=MySQLConnectionPool, dataSourceName=MySQLDataSource}.
    Nested Exception: java.lang.RuntimeException: Failed to Generate Wrapper Class
    at weblogic.utils.wrapper.WrapperFactory.createWrapper(WrapperFactory.ja
    va:141)
    at weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactor
    y.java:73)
    at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:242)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:158)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:444)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    at weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:395)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:448)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    >

    1. This assumes that you have downloaded the mysql database and configured it and started
    it by running mysqld. In my case, I installed it in d:/mysql.
    2. It also assumes that you have configured a user on the database.
    I configured a user "test" with password "test" on the database "mysql" on "localhost" using
    mysql --user=root mysql
    grant all privileges on *.* to test@localhost identified by 'test' with grant option;
    3. It assumes that you have downloaded the Connector/J zip file and pulled out the jar file.
    In my case, I renamed it and copied it to d:/mysql/lib/jdbc.jar.
    4. It is absolutely necessary that you put the jar file in your server classpath. It won't
    work without doing that. Then I booted the server.
    5. I used the WLS 8.1 console to configure the connection pool and associated data source.
    In my case, they look like the following:
    <JDBCConnectionPool DriverName="org.gjt.mm.mysql.Driver"
    Name="mysql" Password="test"
    Properties="user=test"
    Targets="myserver"
    TestTableName="SQL SELECT 1"
    URL="jdbc:mysql://localhost:3306/mysql"/>
    <JDBCTxDataSource
    JNDIName="myDataSource"
    Name="myDataSource"
    PoolName="mysql"
    Targets="myserver"/>
    Note that the console uses the old class name for the driver. There is a new class name but
    the old name still exists and we figured it would cover folks using the old and new classes.
    6. I'll attach a client program that looks up the datasource associated with the connection pool,
    gets a connection, and does some stuff with the connection.
    The user/password combination must have security priviledges in WLS to reserve a connection
    on the pool.
    The code for this program is taken almost entirely from the WLS JDBC documentation.
    This is all pretty standard stuff.
    "Roland" <[email protected]> wrote in message news:[email protected]...
    >
    Pardon me for repeating this topic. I have spent 2 days on this but still ended
    up with failure.
    The similar configuration works very well under wls7.0.
    It should not be a problem of jdbc driver or its classpath setting, since the
    system console say "successful..."
    But when I try to access jsp and servlets, it always throws execeptions. All projects
    run successfully under wls7.0 don't work.
    Please give me some advice, thanks in advance.
    The following is my connection pool setting found in config.xml:
    <JDBCConnectionPool DriverName="com.mysql.jdbc.Driver"
    Name="MySQLConnectionPool" Password="{3DES}aMsyd4ZSbSg="
    Properties="user=root" Targets="cgServer" URL="jdbc:mysql://localhost/userdb"/>
    <JDBCTxDataSource EnableTwoPhaseCommit="true"
    JNDIName="MySQLDataSource" Name="MySQLDataSource"
    PoolName="MySQLConnectionPool" Targets="cgServer"/>
    The screen shot of the exceptions is as below:
    <2003-8-21 ÏÂÎç17ʱ14·Ö08Ãë EST> <Notice> <WebLogicServer> <BEA-000355> <Thread
    "ListenThread.Default" listening on port 7001, ip address *.*>
    java.lang.NoClassDefFoundError: weblogic/jdbc/wrapper/PoolConnection
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    3)
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
    ClassLoader.java:476)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
    Loader.java:181)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
    at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:223)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:217)
    at weblogic.utils.classfile.utils.CodeGenerator.generateClass(CodeGenera
    tor.java:71)
    at weblogic.utils.wrapper.WrapperFactory.generateWrapperClass(WrapperFac
    tory.java:331)
    at weblogic.utils.wrapper.WrapperFactory.getWrapperClass(WrapperFactory.
    java:167)
    at weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactor
    y.java:66)
    at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:242)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:158)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:444)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    <2003-8-21 ÏÂÎç17ʱ14·Ö42Ãë EST> <Error> <HTTP> <BEA-101017> <[ServletContext(id
    =2960804,name=forum,context-path=/forum)] Root cause of ServletException.
    java.sql.SQLException: Cannot obtain connection: driverURL = jdbc:weblogic:pool:
    MySQLConnectionPool, props = {enableTwoPhaseCommit=false, jdbcTxDataSource=true,
    connectionPoolID=MySQLConnectionPool, dataSourceName=MySQLDataSource}.
    Nested Exception: java.lang.RuntimeException: Failed to Generate Wrapper Class
    at weblogic.utils.wrapper.WrapperFactory.createWrapper(WrapperFactory.ja
    va:141)
    at weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactor
    y.java:73)
    at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:242)
    at weblogic.jdbc.pool.Driver.connect(Driver.java:158)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:444)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    at weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:395)
    at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:448)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:138)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:298)
    at jsp_servlet.__testmysql._jspService(__testmysql.java:129)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
    (ServletStubImpl.java:1053)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:387)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:431)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:6310)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
    dSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
    118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:3622)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2569)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    >[mysql.java]

  • IChat with .mac account and intermittent connection failure

    Recently using my .mac login with iChat has been a little troublesome. Sometimes it connects, sometimes it doesn't.
    This morning there's no connection. Seems to be dead.
    An AIM account can log in, and my older (now unused) .mac login will also connect, but my current login simply cannot connect.
    Is it possible that this is another issue at AOL where accounts were deleted or misplaced?
    Anyone else having a similar issue?

    I see a couple things going on...
    A.) The accounts were definitely not deleted. I've been able to log in since posting this. But there IS something going in. Many people are posting new topics about the "timed out" error with .mac accounts right now. True, the specifics seems to shift from post to post, but everyone's set up is different (usually) and that stands to reason. However, the common thread in all the posts is the "timed out" error.
    B.) iChat tried to log back in when waking from sleep. I time out because my wireless network hasn't connected yet. So the reconnection is slower than the attempt to log back in.
    This produces the "timed out" error.
    C.) The port suggestion seems to make a lot of sense. Indeed if everyone is using the same port (and aren't there millions of us?) then using a variety of ports, or rather, any other port should help provided the server is up and running, and our accounts are working (and we're connected to the inter-web and everything else.)
    D.) There seems to be an issue with errors in iChat AV, or perhaps with Mac OS X 10.4.X or possibly only the macbook pro where once an error is returned "timed out" or "could not connect" for whatever reason a certain operation (unknown) or amount of time (unknown) must occur before connection can take place.
    I'd love to see all these problems resolved.

  • HT4199 Sierra 4g mobile wifi and ipad connectivity failure - it is an encryption problem - can it be fixed

    I have checked all the articles on apple support and it should work. The wifi device supports 802.11n. I have contacted Sierra - their suggestions to alter the settings to 802.11g or g/n did not help. Telstra technical have sent me back to apple as they have no idea. The pad sees the network - but never allows the input for the security codes. Have tried altering to older security types. Have tried 'forget network'. have switched things off and then on again -all to no avail. The ipad only accesses the wifi network if i turn off the security. It is an original iPad but the software has been updated. Anyone have any other suggestions?
    thanks, P

    Well, this doesn't actually solve my problem because even if I take your advice in full it doesn't help me connect the iPad to my PC in the future for other backups, transfers, etc.
    Incidentally, the game I purchased was bought through the iPad App Store using my own AppleID and account number, so that one I should absolutely be allowed to keep.  My in-laws had nothing to do with that.  I think the only other app my mother-in-law had on here was iBooks.
    Doesn't anyone else have any suggestions here?

  • Get Connected issue PC Suite 6.8 and 6.7

    Info:
    Windows XP SP2, Nokia PC Suite Version 6.81.13.0, Connectivity Cable Drivers: Version 6.81.1.2
    Nokia 6680, firmaware V 2.23.05
    I have installed the new PC Suite, had 6.7 running before and that worked fine for Bluetooth and cable connection. Now with new PC Suite I get the error message at the ´Get Connected Wizard´ that there is no available connection found and the connection to the phone cannot be etablished. Second message states "Failed to detect available connection types, please reinstall PC Suite".
    I reinstalled several times, even uninstalled (used the uninstaller of PC suite too) and installed 6.7 again but get the same message there now as well.
    Bluetooth itself sees the phone and is already paired with it again. Under Device Manager, I can also see the USB connection (Cable).
    Please help me fixed this issue, what is preventing the Connection Wizard to see my existing connection to the phone?

    Hello Manta and fuzzy_logic, Thanks for the quick reply, tried both suggestions, even uninstalled pc suite and reinstalled it, to no avail.
    If I go to manage connections I get the following error message " Connection to PC Suite failed. Please reinstall Nokia PC Suite. (code: init IMediaControl2).
    Regards,
    Pieter

  • PC Suite 7.1.30.9 connectivity issue xp pro and E6...

    Ive just spent 3 solid hours trying to connect my E65 to my xp pro pc.
    Ive read all manner of threads and ive tried :
    1.removing nokia pc suite
    2.remove nokia connectivity cable driver
    3.reboot
    4.turn off mobile phone
    5.turn on mobile phone
    6.reinstall PC Suite 7.1.30.9
    7.reinstall Nokia connectiviy Cable Driver Nokia_Connectivity_Cable_Driver_rel_6_82_4_eng.zip 
    8. switching usb ports
    9.switching phones (also have exact problem with nokia 6280)
    10. pc suite connection wizard
    11.pc suite mode / data stoarge mode / sychronisation from mobile
    12. directly upgrading usb driver from device manager on pc
    13. changing cables.
    (and yes the ports and cable connectors are dirt/dust free)
    14.repairing nokia pc suite from add remove programs on pc
    15. turning off all firewalls / antivirus
     and timing the combination of the above in different order.
    in case i ran over a bus of chinamen i didnt know about ive just bought another cable off ebay which should come this week (making this the 3rd cable)
    the resounding answers im picking up from all manner of forum threads is that pc suite USED to work (which in my case it did) until i did the probably retarded thing and upgraded it to the latest (which is popularly recommended).
    so, im asking for more advice really, as to what could possibly be wrong that i have not done or thought of, to make my pc realise that i have connected my E65 and 6280.
    I guess the resounding piece of evidence is that in device manager the connection displays as an unknown usb device....................(these 2cables did work with an older version of pc suite i might add some months ago, so im not altogether sold on the idea that they both could be stuffed)
    thanks for reading and in the event, thank you for answering, ill check back soon.
    Cheers
    M.J

    I have the same problem with N97 and xp pro version 2002...after the update that is

  • Ovi Suite 2 and Internet Connection

    My computer is connected to the Internet via mobile boardband and it works fine.  Now, I'm using Ovi Suite 2, and when I check for any new software through Ovi Suite, it insists on connecting to the Internet via my phone or it just says there's no Internet connection available.  Why can't Ovi Suite use my computer's connection?  This problem existed with Ovi Suite 1 too.
    For some reasons PC Suite 7 won't connect to my phone at all in Windows 7, but Ovi Suite is OK.
    FWIW, I'm using Windows 7 64-bit, connecting to my phone via Bluetooth.
    P.S.  Why is Ovi Suite so slow?  A basic sync of contacts and calendar was done in seconds in PC Suite, now it's minutes...
    N97-1

    Hi there, 
    altough I'm not from Australia, I'm facing same problem with NOS connection while checking for updates.
    The specs: 
    Nokia Ovi Suite 2.1.1.1
    PC Connectivity Solution 10.18.0.0
    Connectivity Cable Driver 7.1.29.0
    Nokia Ovi Suite Software Updater 2010.18.0.60492
    Maps Service API 3.0.38.0
    Nokia mPlatform 2.6.86
    Ovi Desktop Sync Engine 1.1.0.82
    Microsoft Windows 7 32-bit Edition
    Language: Polish
    Connection: USB
    Nokia 5230
    Firmware: 10.0.071.259.02
    Whenever I try to check if there're any updates for both NOS and 5230 firmware, Ovi Suite gives me an error saying my connection is broken or the firewall is blocking ports. 
    I'm 100% sure BitDefender allows NOS to connect to the internet, the machine was restarted after the installation.
    Any solution for this?
    Thanks!

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • Can not connect to the App store I keep getting a connection failure message. Mail and Safari are working fine. Also Iphoto wont update to newer version and itunes does open up properly.

    I have recently bought a new imac. Imported all my files etc. from my G5 using Timemachine.
    Iphoto requires updating but wont!
    itunes wont open up properly the text is wrong!!
    I keep getting a connection failure message when trying to visit the App store.
    Safari and Mail are working fine.
    My Apple Id is also fine as it works with my ipad.
    Any suggestions?

    Hello Ben, see if this might be it...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

  • How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

    What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
    How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
    Thank you,

    AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
    It works with N version airports.
    It will also show details of the AC model but cannot be used for the setup.. mostly.
    I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
    Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
    I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
    If you do not use ethernet then you are going to be forced to accept slow speed.
    EOP (ethernet over power). Also called homeplug in the US.
    http://en.wikipedia.org/wiki/HomePlug
    Provides a method of networking over power cabling that already exists in your house.
    So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
    To spell this out.
    A wireless link to an extended device will go very slowly.. if it is not direct.
    So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
    That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
    Ethernet by contrast does both at once. It is full duplex.
    Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
    Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
    When you put all this together.. there are a couple of rules for fast connection.
    1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
    2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
    3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
    Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Maybe you are looking for

  • Error while invoking webservice throu https

    Error while invoking webservice throu https:// can any one help me on this topic please: CODE: SOAPConnection con = null;           try{                String endpoint = "https://wks3089639:4565/Service.serviceagent/PortTypeEndpoint1";               

  • How to convert Oracle function in UDB

    Hi , i am writing this function in oracle.Could you please convert this function in UDB because i am new in this and dont know how to use decode function in UDB Please following is the code for oracle. CREATE OR REPLACE function fun ( localex varchar

  • Lost work

    I was working on multiple art boards. Illustrator asked me if I wanted to revert. I accidentally hit okay, and all of my artboards disapeared. I tried doing undo, but nothing happened. How do I undo this? I need that work back.

  • Unknown state or association field exception

    I meet the above exception on my project, but not know where my problem lies. Please help. Thank you. Here is the exception message: Exception Description: Unknown state or association field [projectNoSub] of class [database.SfcWip]. Here is the enti

  • Itunes Error 21; Not security and DFU doesn't work

    I have tried recovery mode, tried DFU, fixed my security so that it doesn't affect itunes, and still no dice! I need to know if anything else will work.