PC Suite 6.84, Restore crash under Vista x64 Ultim...

Hello, there. I have PC Suite 6.84 and, of course contents copier V4.0 on Vista Ultimate x64. Backup went very well with both N73ME or 6267. However, on Restore part, when go to part that ask us which Backup you want to restore, it crashs and Windows has to close program.
PS. Not a problem with WinXP. All with USB connection.
What should I do? Any suggestion??
Also, N-Series PC suite have had the similar problem but right from start Contents Copier V3.0. Is there any bugs in program or it just Winows Vista?Message Edited by delixis on 28-Oct-200703:47 AM
C6-00 with 8GB MicroSD

There are no suggestions what so ever. This means I'm alone or no body here use Vista x64 Ultimate version. Please shade some light on me.
C6-00 with 8GB MicroSD

Similar Messages

S10 RAID configuration = AHCI = Blue Screen under Vista x64

I'm trying to setup a SATA RAID 1 configuration on my new S10 and it's really a nightmare...if I enable the Raid option in the BIOS it enables also the AHCI feature and my Vista x64 (pre-installed on the S10) don't boot, it just show me a blue screen that I don't even have the time to read. If I disable the AHCI option it's ok I can't boot again.
The question is simple, how can I achieve to install an updated AHCI driver for Vista x64 in order to boot and then use the RAID features of my S10 ?
I've tried do download the latest version of the IMSM from Intel (x64 vista version) but it does'nt want to install saying that I haven't the required configuration. My S10 uses an ICH 9 chipset, so I don't understant why I can't install this update.
Please what is the solution to have AHCI and RAID working on an S10 WITHOUT REINSTALLING Vista (I don't have any installation CD and don't wan't to) ???? Note that my system is up to date regarding the ThinkVantage drivers (and windows updates also)
Thanks by advance for your help
Solved!
Go to Solution.

I finally achieve to configure AHCI under Vista x64 on my S10 (but still a problem with RAID..), here's how I did :
- Open registry, go to the Key \HKLM\SYSTEM\CurrentControlSet\Services\msahci
- Set the DWORD "Start" at 0 (it was 4 on my system)
- Restart your computer then Enable immediatly the AHCI feature in the BIOS
- Vista will start without BSOD using it's default SATA AHCI driver. Let it detect & install your AHCI periphals before going to the next step
- Install the latest Lenovo IMSM update for S10 from here : http://www-307.ibm.com/pc/support/site.wss/MIGR-69984.html.
- Restart the computer it should boot without any blue screen, go to the Vista device manager and check that your IDE ATA/ATAPI controller is "Intel(R) ICH9 SATA AHCI Controller".
AHCI is active now, but RAID still doesn't work...here's what I did :
- I backup my main HDD with R&R (after having installed AHCI)
- I restart and enable the SATA RAID in the BIOS
- Restart again, CTRL+I to open IMSM and create my RAID 1 array (2x500GB) under the name "Volume0" (all parameters to default)
- Ok, raid array created, I now boot from my R&R emergency CD and restore my backup
- 3 hours later I reboot...and blue screen again just when Vista starts (seems to be the same BSOD than with AHCI)
- if I disable the RAID option in BIOS the (but let AHCI enabled) Vista boots again and everything seems fine, and it seems that my raid array is still configured for Windows since I see a Volume0 drive in the device manager. But RAID is disabled in the BIOS so what ?
I am lost, I spent 2 full days on these AHCI/RAID problems and nothing seems to work correctly. Each test on RAID configuration needs 3 hours of restoration. I am very dissapointed to see how RAID is complicated to configure on the S10, it's is exactly to avoid this kind of problem that I bought a "workstation" and it's a nightmare.
Hope you can help me, thanks.

X-fi platinum gives out only static noise under Vista x64

hello. I need some help getting x-fi to work under Vista x64.
the card works great under XP. no problems at all.
under Vista x64 drivers install fine. but the card only outputs very loud static sound. sometimes all the time, sometimes only when I try to play music. when I try to play audio the program usually freezes or acts like it takes much longer to play the sound. for example Vista speaker test shows speaker animation for much longer than normally.
switching to Audio Creation mode usually helps some, but still only static.
switching in Vista Sound->Recording devices causes a lot of static to be generated as soon as I switch to it (and nothing is being played).
sometimes there's no sound at all (programs act normally then).
I've tried all X-Fi drivers I could find (newest and older, including from X-Fi Vista CD) to the same result.
tried 5. speakers and connect to front panel.
tried installing drivers in safe mode. tried clearing old driver after driver un-install to reinstall the driver fresh.
if it wouldn't work under XP I?would have sent it back, bet seeing that it works fine there I can only guess that it has something to do with drivers.
any help would be appreciated. thank you.

if anyone experiences the same issue, reformatting HDD and reinstalling Vista from scratch solved tho problem.
I guess there was some conflict with the previous sound driver.

Quicktime 7.2 under Vista x64

I am using iTunes 7.3.1 under Vista x64 Ultimate with no issues. However, Quicktime 7.2 doesn't work very well.
When I open .mp4 vidoes which run fine under Windows Media Player, Quicktime Player seems to stubmle.
I get the following errors:
-The video screen turns green
-Video stutters
-Audio seems to play ok
I am running on an AMD 3800 x2 with nVidia 7900GTO video card (using latest WHQL video drivers from nVidia).
Are there known issues with Quicktime with Vista x64?

I have the same issue with QT running on Vista. The new version of QT that just came only made things worse!!! Now the tv shows I purchased from iTunes shuts iTunes down when I try to view them. At first, I was getting the green screen, video stuttering, etc.
I tried ALL the recommended fixes:
- Changing the settings in QT to take off Direct3D
- changing the settings in QT to "safe mode"
- Updating my Nvidia graphics card driver
- Going into my bios to ensure my hard drive was not using the RAID array
- Uninstalling QT and reinstalling
This is DEFINITELY a QT (Apple) issue. They simply do not support Vista. I have already stopped purchasing video media on iTunes until QT is updated to run smoothly with Vista.
All that to say... you can search discussion boards all you want, but there is no real fix for QT to run smooth video (audio is OK) in Vista.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM Windows Vista 80 Gig Video iPod
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM Windows Vista 80 Gig Video iPod

(D20) Marvell SAS/SATA Controller Utility under Vista X64

Dear All,
I am the new user for Lenovo workstation. recently I bought D20 for my work. I use the Vista X64 as my O.S. for D20 and I also setup the RAID5 under Marvell SAS Storage Controller.
Everything running well presently, but I can not find the Marvell SAS/SATA Storage Controller utility to monitor the RAID volume under Vista x64 ?
Can you advise me where I can find it or how I can monitor the RAID volume under Vista X64 ?
Thanks,
Cody.
Solved!
Go to Solution.

cody,
currently that's the only version available that i could find and the only one listed on the D20 driver matrix page.
all you can do is try installing it in vista and see if it works. most likely it will.
-erik
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

SQL Developer crashes under Vista

Hallo,
i recently installed SQLDeveloper 1.5.3 under Vista w/o JRE. On my Computer i have JRE 1.6.0_11.
When i use SQLDeveloper and give Windows Focus to another Window (e.g. Notepad, Explorer ...) and return to SQLDeveloper with a click on the upper Windows Border SQLDeveloper closes (crashes?) suddenly.
Any idea?
Another Question.: How can i get rid of the Filetype Association Dialog which opens on every SQLDeveloper Startup?.
Kind regards,
Peter

More specifically, someone managed to eliminate the associations issue by granting permissions to HKEY_CLASSES_ROOT\SQL Developer.sqlFile . If that's not possible, you'll have to wait at least for 2.0 for the issue to be fixed.
Regards,
K.

Photo Mail crashing under Vista

Has anyone else run into a problem with Element 6's Photo Mail crashing using Vista? I select the recipient and open the Choose Stationary page and the Windoes error screen "Adobe Photoshop Elements 6.0 (Organizer) has stopped working" pops up and closes the program. Any suggestions?

I have . No fixes I see.

Losing serial numbers under Vista x64/Boot Camp

I have Vista x64 installed under Leopard 10.5.2 under Bootcamp (running fine). I installed a 64-bit version of an animation program that required that I enter a bunch of serial numbers for its various modules. The app ran fine after I finished. But when I exited out to Mac OS and later came back into Vista, all the serials were gone and I had to enter them again. This is repeatable. Any thoughts or suggestions?
Thanks much.
Dennis

Snow Leopard changed things

Dreamweaver Crashing under Vista

I’ve been frustrated by Dreamweaver 8 crashing on
opening under Windows Vista....Yes I know it wasn’t designed
from Vista but never-the-less that’s what I’m using.
I found out that if I disable the start page it doesn’t
crash anymore! So if you are having similar problems you might want
to try this “fix”

Hi Ella
We are seeing some reports of DW 8 crashes when browsing for
files in Vista,
but we aren't able to reproduce this issue on Vista. It seems
that most
Vista users are not seeing this problem. Here are some
questions that might
help us come up with steps to reproduce. It would be helpful
if other users
seeing Vista problems could post answers to these questions
as well:
1. What edition of Vista are you using?
2. How much RAM does your PC have?
3. Do you have the DW 8.0.2 Updater installed?
4. When you installed Vista, was it a clean install, or did
you upgrade
your system on top of Windows XP?
5. If you upgraded from Windows XP without doing a clean
install, was
Dreamweaver already installed before upgrading to Vista, or
did you install
Dreamweaver after upgrading to Vista?
6. Do you get a crash when browsing for files in any other
programs besides
Dreamweaver?
7. Does your Windows users account have Admin privileges?
8. Try to run Dreamweaver in Safe Mode or Diagnostic Startup
Mode and see
if the problem occurs:
Running Studio products in Safe Mode or Diagnostic Startup
mode
http://www.adobe.com/go/d2a8c508
9. Try doing a complete uninstall and reinstall of
Dreamweaver as outlined
here:
Uninstalling Studio 8 applications on Windows
http://www.adobe.com/go/4e7826b7
Installing Studio 8 products in Selective Startup mode on
Windows XP
http://www.adobe.com/go/d2b5934d
Can you send us a bug report so we can investigate this
problem? All DW
users seeing Vista problems should send us a bug report:
http://www.adobe.com/go/wish
It would be helpful if you could let us know your forum
username when you
fill out the bug form, so we can link your forum post to your
bug report.
Thanks,
David Alcala
Adobe Product Support

Palm Desktop 6.2 crashing under Vista

I was running 4.1.4 and the alarm manager would crap out from time to time causing me to miss appointments. I updated to desktop 6.2 and the alarm manager still craps out, but now the desktop also crashes! If I view the calendar in months and skip back past June 2009 using the arrow keys around the month. Is this software used for the newer Palm products? It looks to me like Palm is all but ignoring this program.
Rick
Post relates to: Zire 72

I've run into the problem before but it's either been bad data or events spanning midnight. Usually in the month before or after the month that locks up the Palm desktop. You might want to check Sept and Nov for any events that span midnight.
Post relates to: None

ADE 2.0 crashes under Vista Home

First at the end of the installation I recieve the following message about migration stopped working (note that I had v. 1.7.2 installed)
Description:
Stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    migration.exe
Application Version:    1.0.0.0
Application Timestamp:    50583571
Fault Module Name:    KERNEL32.dll
Fault Module Version:    6.0.6002.18704
Fault Module Timestamp:    5065ccb6
Exception Code:    e0434f4d
Exception Offset:    0003fc16
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    4105
Then when I start ADE 2.0 I have a dialog informing me that Adobe Digital Editions 2.0 stopped working.
Description:
Stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    DigitalEditions.exe
Application Version:    2.0.0.0
Application Timestamp:    5058357c
Fault Module Name:    KERNEL32.dll
Fault Module Version:    6.0.6002.18704
Fault Module Timestamp:    5065ccb6
Exception Code:    e0434f4d
Exception Offset:    0003fc16
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    4105
Although I can revert backt to v. 1.7.2. it is getting a problem for me because ebook sites requiring more and more ADE v. 2.0 installed. Please help.

ADE2.0 is a very buggy program. I still use 1.7.2 as it is adequate for me and works with my PRS-350; but I can see that there are a couple of features of ADE 2.0 that would be useful (if it worked at all).
First, just in case. Did you have an option 'skip' or 'migrate data' when installing ADE2.0. Try choosing the option 'skip'.
(Just did a test and installed V2.0 on Windows 8 using the 'Skip' options, and without un-installing 1.7.2 and it worked.
Of course, that doesn't mean it will work for you ...)
If you have done that or it doesn't work, try the following. I can't promise anything as I haven't tried it; but .....
Uninstall v1.7.2.
Check for all directories relating to Digital Editions and delete them (or safer, rename them in case they contain books etc). eg
C:\Program Files\Adobe\Adobe Digital Editions
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe\Adobe Digital Editions
C:\Users\<userid>\AppData\Local\Temp\Digital Editions
C:\Users\<userid>\AppData\Roaming\Adobe
C:\Users\<userid>\Documents\My Digital Editions

System Control Manager for GX710 under Vista x64?

OK So i purchased a GX710-250 about 3 months ago and iv been hooked on it . I just ordered the extended battery from etech4sale.com and i loaded up Vista Ultimate X64 on it. Everything working great on it as all the items have 64 bit drivers but i ran into a snag with the SCM software for it. I notice that That the SCM software is only 32X but there is SCM Out there under some other laptop that MSI so i wounder if i can run the software from it on my laptop. I really just need the Volume Control for in game but i would to have my little UGI flash up and show me whats going on. Has any one tried using the SCM from another laptops yet? was it compatible with the laptop? where there any issues? just throwing this out there since i don't think MSI would go back and rebuild the SCM for 64X Vista.
PS
Vista 64 is the future....get use to it. I love it and the Emu system built into it is good enough already.

o well i still got 2 years to get use to this system and all so i don't mine installing it on my pc...anyways when the time comes and sooner or later everyone will have to upgrade in some format... i just hope 7 will go up to 64 bit also. I've been on 64 for about a month now and I've seen no performance decrease but in fact seen performance improvement . My Friends and I see it its time for a generational leap in technology and have a windows system be only 64 bit. But knowing Microsoft they are going to make Vista and Windows 7 the transitional OS like they did back in the early 90 with windows 3.0 and 3.1. So i want to know whats going to be the Windows 95 of the 2000 and force a new 64x standard . I'm sure im going to keep my XP Cd until 2010 when they kill support for XP .

AC3Filter Dolby decoding on Xfi under Vista x64 - please he

How do I set up AC3filter to decode the signal from my satellite box optical in?I have the audio optical output from my Sky+ satellite receiver connected through the I/O module to my?X-Fi XtremeGamer Fatalty Pro. My Creative Inspire T7700 7. speakers are connected directly?to my soundcard with the 7. audio cable. I can hear normal sounds fine through my system, but anything broadcast with DTS (DD) doesn't work - i guess because Vista does not support hardware decoding. So I'm trying to use A3filter to decode for me. However, I can't work out the settings I need to use. Any ideas? Many thanks.

Dolby Digital (DD/AC3) is completely different form DTS. I'm not sure that Sky transmits DTS, so assume thats a typo. Chances are that there is no support for incoming decode of multichannel audio via Creatives crap Vista drivers, compounded Vista's **bleep** DRM controls and removal or DirectSound. If that's the case then at most you will only get a stereo stream passed from the optical in to the soundcard, so any software like AC3Filter or FFDShow's direct sound filters wont work anyway. From the Vista FAQ:?Will decoding of Dolby Digital and DTS signals be supported in the future? If not, why not?
These functions are not supported at driver level in Windows Vista and going forward will be supported at application level by applications such as Power DVD or WinDVD.
Perhaps when/if Creative pull their finger out and get some proper drivers out there will be software support for decode of multichannel, (if there isnt already), although it begs the question of why Creative are incapable of doing the same at driver level or via their own software.

Enabling a microphone in Vista x64 Ultim

Hello, I use audio recording mode on a xfi extreme music?since it allow for the highest playback volume by checking SVM and Crystalizer along with bass boost for 2. speakers. I have 5. speakers which sounded great in xp 32 bit, but in vista they just don't sound right so I use 2..
When I connect a microphone and I goto recording tab and change it to microphone all I can record using fraps software is the microphone. I want it to record the game voice comms and the everything happening in squad matches.
please tell me how to enable a mic without loosing the ability to record the sounds of what is happening in the game also.
Changing the recording to microphone also changes the playback to microphone when the playback should be what-u-hear

i guess creative is not fully supported for vista yet.......as my soundcard doesnt work properly as well.....i hope they can work for this as soon as possible

Problems in Vista x64

Hi
I have problem with crashes in Vista x64. I was blaming nvidia but removing my SB Fatalty card solves my problem.
What happens: When enabling SLI , sound crashes in games. Even without playing I get BSOD at boot (ramdom) this is ONLY when enabling SLI
Anyone had similar problem
My system:
q6600, XFX 780i mobo, 4x2GB Muskin, 2x WD Veloraptors raid0, 2x 8800GTS 320mb, Supernova kW PSU, SB Fatalty

Proxie_dk,
Also,
You might want to make sure that you have done the following to try and help resolve or workaround the problem more:
Make sure you have set the correct timinns and voltages for Mushkin memory in BIOS, more information at Mushkin website under support.
Make sure you have the latest version of the BIOS for your motherboard, as several manufacturers did release updates for the problems with NVIDIA and Creative compatability. Look at support section on the XFX support site.
Make sure you are using the latest motherboard chipset drivers available from NVIDIA. 5.25 is the latest, and the international package is here.
Make sure you are using the latest graphics drivers available from NVIDIA. 86.8 is the latest, and the international package is here.
Also, perhaps not as important as the above, make sure you have the latest Windows Updates installed using Microsoft Update.

PC Suite 6.84, Restore crash under Vista x64 Ultim...

Similar Messages

Maybe you are looking for