Pc suite 6 system error - e61 smartphone

can synchronize contacts. can't synchronize notes and schedule. any idea why?

Thanks for this.
These are the steps I had tried coutless times over the last three days or so - always came back to the same problem.
I have now found the solution, and got my phone installed, but no thanks to Nokia Technical Support - it was due to a post on a message board at
/discussions/board/message?board.id=pcsuite&message.id=16290#Ma61290.
Basically, the Nokia Uninstall software (or the PC Suite cleaner software) does not go far enough. In particular, it needs to delete any keys in the Registry under Local_Machine\System\CurrentControlSet\services that include nmwcd in their name - there were 4 in my Registry. These relate to the USB drivers for the generic phone, phone parent and modem. Curently, these have to be deleted manually.
Without these deleted, Windows rightly thinks that the phone alreday exists, because these Registry keys say it is. This is not a Windows problem (as the Nokia Tech Support people via Nokia Customer Care UK insisted to me twice), it is a Nokia problem. Their uninstall/cleaner software is not good enough when you have to install a new version of PC Suite and it needs sorting PDQ, as I and loads of others (as is evident from the message boards) have the same problem.
neil

Similar Messages

PC Suite - System Error

I can not sync my phone with PC Suite.
I know that the phone is connecting, because I can see my messages in the PC suite window.
Clicking on the Sync logo in PC Suite I get the following message "Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation." and the message "System Error" on the handset.
II have uninstalled PC Suite and NSU, and used the nokia cleaner...and Reinstalled PC Suite (v7.1.26.1) and NSU (v1.6.13 en) on my notebook.
The handset is a 6110 Navigator (24.01) V06.01 RM-122. I have reset my handset to the factory default settings.
I am using XP SP2, USB or Bluetooth, same problem.
I can not reinstall PC Suite Support as it is greyed out in PC Suite.
When I try to run NSU, it hangs that the first "starting application" window, and then error message "Sorry, Nokia Software Updater service in unavailable, please try again later".
I have kept on digging to try and sort this myself...
If I set PC Sync to sync everything but callendar/tasks, it works fine. Even with callendar set for 1 Day past and 1 Day future it still fails.
Some posts talk about bad characters in your outlook calendar, but I can not delete my entire calendar as the whole reason I need this is my calendar at work.
Another post talks about your PC Sync profile in the phone, but mine seems OK. Not sure what it should be, but it seems normal.
I still have no idea why NSU fails.
Any advice or solution?
Message Edited by daewoo01 on 05-Jun-2009 07:10 AM

Continue to try and solve this problem...
When I try to open the calendar on the phone, it just flashes and doesn't do anything.... so the problem is obviously with the phone...
Nokia Care just suggested I reset to default settings, which I did, no improvement...
any ideas?

E61 - Error message "system error!" when trying to...

I have been trying to synchronise my E61, and keep getting system error. This happens whether connected thru USP or by Bluetooth.
Will I need to reformat the phone and reload software.
Please help.
Happt Christmas

Go through all these threads and post back if that solves your problem or still you stuck up.
Mathan

Nokia E61 system error, phone start-up failure

Good day I did a software update(RM89) on my E61 phone. After completion and start up my phone gave me a system error and then phone start up failure. How can i reset or go in to safe mode to rective to problem?

The only things you can try are:
1) Read this post in the Pool of Knowledge:
Recovering from a failed update
and 2) Take your phone into a Nokia Care Point. Note that if your phone is still in the warranty period and it got bricked as a result of using NSU, the repair is covered under the warranty.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Mail for Exchange E61: getting "system error" whil...

Hello everybody !
our company is using MS Exchange 2007.If try try to sync the calender I am getting a "system error".
Synchronizing the e-mail works fine.If I look in the admin log I see the following error.
22/04/2007 01:15:49 start Calendar sync
22/04/2007 01:15:51 client->server adds=0 changes=0 deletes=0 fails=0
22/04/2007 01:15:51 server->client adds=0 changes=0 deletes=0 fails=0
22/04/2007 01:15:57 sync died (3), collection=Calendar activity=encoding sync command
sync died due error 3.Does someone know what err 3 means ? It would be very kind of you if someone interprets this log or is someone experiencing the same problem with MS Exchange 2007.
I did not have this problem with MS Exchange 2003.
All help would be greatly appreciated !
Kind regards,
Kuskaya

Hi,
updated the firmware.It works fine after firmware update.Exchange 2007 requeries the latest firmware.
Regards,
Cengiz Kuskaya

Adobe Bridge gives a system error

Adobe CS4. Installed on my mac. Does not recognize Raw files and when i try to open Bridge says a system error has occured.
Adobe Photoshop Version: 11.0
Operating System: Mac OS 10.9.0
Camera Raw 5.0
Please help

Does not recognize Raw files
From which camera make and model?
Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Compatible Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Error message in PO : System error (error in method PO_POST)

Hi all,
I'm working on BAdI ME_PURCHDOC_POSTED
for Requisition qty checking with PO qty with some tolerance(+/-).
For some conditions I have to terminate the PO posting(ME57).
In the implementation of the method POSTED, afetr some validations, mentioned the statement:
This is my custom message in method >
message e032(/SISLEMCU/MSG01) with wa_ekpo-matnr
When doing this the posting of the document is terminated.
But after it displays the custom message, it followed by the message "System error (error in method PO_POST)" and then terminated.
Here are my questions:
1.I don't want to display "system error (error in method po_post)" message.
2. I want the the screen to hold the data i entered previously after the custom message was prompted and not terminate straight away, as i will need to reenter my data for PO again.
Thanx in Adv.
Regards
Uday

Change for a BADI more suited (not in the update of after-save process) like ME_PROCESS_PO_CUST (Method PROCESS_ITEM, CHECK).
ME_PURCHDOC_POSTED is too late.
Regards

C7 General : System Error while deleting the photo...

It show me system error when i attempted to delete the photos. Even i had my photos deleted on mass storage mode and ovi suite, it's seem that the deleted photos is still in the memory when i open the photo app.
Some one please help me on that i'm running out of memory. thank you.

hi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin.

Adobe Photoshop CS6: Photoshop.exe - System Error The program can't start because ONCoreFoundation7

I get this error after updating ONONE premium edition 8 to 8.1
been to their site no luck in resoving error.
I click ok to error PS cs6 still launches, just annoying.
ONCoreFoundation7.dll is part of ONONE 7

after updating ONONE premium edition 8 to 8.1
does not say windows 8 or 8.1
again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
does not say 7
here's your more info
I'm trying to fix an error message not covered in the knowledge base.
I open PS CS6 (after updating to PE 8.1) and I get an error message...
Adobe Photoshop CS6: Photoshop.exe - System Error
The program can't start because ONCoreFoundation7.dll is missing
from your computer. Try reinstalling the program to fix this problem
I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
Does anyone know the fix? I even tried reinstalling PE 8.1.
PE=Premium Edition

C7 ovi maps - check in - system error

I didn't have any problem with ovi maps but after I updated my C7 from pr 1.1 to 1.2 check in function doesn't work and it says "SYSTEM ERROR". Any solution ? Please help... I am about to blow
Solved!
Go to Solution.

pj98 wrote:
Try updating to the latest Ovi Maps 3.06 11wk10 version, it should now be available via SW Update menu, Ovi Suite or from Ovi Store.
For the benefit of Mac users or anyone else, application also available for direct download from here:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-c7-00...
Happy to have helped forum with a Support Ratio = 42.5

N95 Clock System Error

My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
Regards

03-Dec-2007 04:25 PM
n95_pilot wrote:
My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
Regards
try to get the latest N95 software, ya know NSU...

Noki c6-00 system error

hi whem i press menu button in my c6-00 it showing system error .how it can be solved.

Although all data would be deleted have you tried reset to factory settings by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user) or keep RED, GREEN & CAMERA all depressed whilst powering on until Nokia "Shaking hands" logo appears. If still issues follow advice to re-install existing device software using option in Nokia Suite upon PC.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Arabic language input system error curve 9300

i have a blackberry curve 9300 running ios 6. every time i try to write in Arabic, whenever i hit teh space bar, i get a message "imput system error. system is being restarted" is there a solution to this?

Hello!
That error typically means that there is serious corruption in your OS...and a clean OS reload is needed to attempt to cure it.
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Startup - System Error

Today, wehn I switched ON my mobile, it took longer than usual but when it finally loaded it gave this: 'System Error'. The device works fine though. Firstly, somebody help me by explaining what that is and why did it occur. Secondly, how can I correct it?
I own a Nokia E7.
Awaiting replies.

farby wrote:
First, Back-up all your data thru' Nokia Suite...
In case it appears again, perform a Soft reset by dialing *#7370# followed by 12345 (Default code unless set by you).
Please be aware that user data deleted from both C:\ and E:\ by this reset procedure.
Happy to have helped forum with a Support Ratio = 42.5

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Pc suite 6 system error - e61 smartphone

Similar Messages

Maybe you are looking for