PC Suite 7.0.8.2 don't install CA-42 drivers

Hi all:
A few days ago I have to reinstall my Dell D620 with Windows XP SP3 (Spanish version) from scratch.
So I decide to install the latest pcsuite software for my Nokia 5140b... so good so fine. The installation was smooth until have to recognize the CA-42 cable.
The Windows detect the CA-42 cable but was unable to install the correct drivers... so I'm disappointed and stuck.
Why disappointing:
because every one and a half release version of PCSuite gave trouble with the CA-42 drivers...For example before reinstall I was using Nokia_PC_Suite_rel_6_85_12_0_spa_co_web/Nokia_PC_Suite_6_84_10_3_spa_co_web without problems with the CA-42 cable... Before that 6.82 gave me the same problem as with 7.0.8.2. Why QA don't work with 5140/CA-42 (duo)????
Isn't suppose that a new release keep what was working and fix the wasn't working??
Stuck:
because I can downgrade my PCSuite to the working release but as far I use I keeps suggesting me that there is a new version... so If I upgrade my CA-42 don't works..
So I need to know:
a) Is there a new release that correctly install the CA-42 drivers?
b) How can I "expand" the .exe file to manually point windows to where the drivers are and hopefully let work my CA-42 cable??
Thanks a lot and keep working...
PD: For that people who will ask... yes my cable is original one (bought from a nokia reseller) and have this serial #:060020028.
Help-->About--->info capture from actual PCSuite.
Solución de conectividad para PC:
versión 8.22.4.0
Nokia Connectivity Cable Driver:
versión 7.0.2.0

I'm pretty fed up with the "solutions" for this problem on these discussion boards. Turning off virus checkers and firewalls to make the "improved" version of PC Suite work when the old one did just fine makes no sense to me. If I was that interested in computers I would have majored in them. I'm just mad and don't want to learn how to do Windows System commands.
Would Nokia make previous versions of PC Suite that work available as downloads again?

Similar Messages

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.

I sold my iPhone4, and I need to restore it before shipping it. The buyer has asked that I don't install iOS6. Is this possible? Does the restore process force iOS6 onto the phone? Before I backup/restore it, it has iOS5.1.1 installed.

I sold my iPhone4, and I need to restore it before shipping it. The buyer has asked that I don't install iOS6. Is this possible? Does the restore process force iOS6 onto the phone? Before I backup/restore it, it has iOS5.1.1 installed.
Thanks in advance.
jj

Just go to Settings>General>Reset>Reset all Content and Settings

I have to replace a corrupted hard-drive so what do I need to do to uninstall the creative Suite CS^ so that I can re-install onto the neww ssd hard-drive that I am upgrading to???

I have to replace a corrupted hard-drive so what do I need to do to uninstall the creative Suite CS^ so that I can re-install onto the neww ssd hard-drive that I am upgrading to???

Simply deactivate the suite on the old drive and then install it on the new one.
Download CS6 products
Mylenium

Apple going MS style - don't install Lion if you don't need to

Hi,
I am obviously frustrated. I want to warn anyone with an Apple MacBook, MacBook Air or iMac that is not very recent. If you do not need Lion, don't install it. It is a disaster.
Don't get me wrong. I am a huge Apple fun, but with this release I am getting a degavu regarding my MS Windows history. Lion has similar "features" as Windows has and which were my original reason the happily get rid of MS Windows. Apple has gone totally the wrong way with this release if you ask me.
Problem I have since I installed Lion:
- non responsive applications for no apparent reason.
- hanging system several times a day.
- having to reboot my system to get any response from it several time a day.
- totally unpredicatable battery lifetime of my MacBooks. Mostly less than half the original amount before installing Lion.
This is not just on a single system, but on all systems I have. All systems were bought during 2007.
In my opinion this release is in it's current state a disaster and absolutely not Apple worthy. I hope they fire some people at Apple for this, becaus this will damage the brand in my opinion and should never happen again.
Why MS style (in my opinion)? Apple has given a lot of focus on useless graphical features (LaunchPad and MissionControl) (also degavu regarding MS). Well I can tell you it is not worth it. Snow Leopard was working like a charm. Lion is more like a Snail.
I hope Apple will come with updates really quickly, otherwise I am afraid the are now on the same quality level as MS. The point have always been happy to pay the Apple prices, because they were absolutely worth it. I can get poor quality for much less money. Even though this update is very cheap, it is still not worth the money.
Best regards,
Ruud Wijnands

I have two other email accounts so the loss of loss of apple email is no big thing. Cheaper cell phones is not a bad thing either
so ha ha back at ya

Re: just done clean install of mountain lion.

just done clean install of mountain lion and now my recovery partition on my drive is for mountain lion and not lion as it was when i bought it can anyone help me.

sorry i dont think you understand, my imac is 3 months old and when i bought it lion was on it and on the recovery part of the hard drive. now me being a nit wit thought i would up grade to mountain lion so i did a clean install thinking if i dont like it i can go back by just booting from the recovery partition but its been up dated to mountain lion and ive lost lion hope this explanes everthing.

Don't install New Ice Cream Sandwich update for Droids !!!! DON'T DO IT !!!!

Don't install New Ice Cream Sandwich update for Droids dated October 2012 !!!! DON'T DO IT !!!! I had a perfectly GREAT Droid Bionic untill I installed the NEW IC Sandwich operating Sys Verizon sent me when I turned the phone on 3 days ago.
Now Texting is a nightmare w/ every letter needing to be corrected do to tiny unforgiving keyboard.
Vm doesn't notify me when a call is missed.
Map is 3 miles off fr present location.
Apps & Icons on main screen randomly disapear & re-apear hrs later.
Icons are always in a different spot when ever phone is turned on.
Now I have to hit multiple buttons to answer phone. Before only had to hit one key.
No responce when touching apps such as browser or gallery
settings menu is totally confusing - old menu was clear and simple.
first time I used Alarm function I couldn't turn off alarm - had to pwr down phone.
Verizon refuses to reinstall old software that was "PROBLEM FREE".
Clearly this new software wasn't debuged B4 they released it.
Going to Apple!

Try a Factory Reset First that Should Help.. Here is the Instructions
Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device.
Keep in mind, when using this feature; everything is deleted. Nothing stored on the MicroSD or the internal phone storage will be affected unless you choose to erase it as well. To erase your data you'll need to go to the SD card & phone storage under device settings. Your information is automatically backed up to your Google account. Your information will be restored when you login with your user name and a password.
Factory Data Reset
From the screen of your phone, open the Applications Tray by Tapping . Or press the Menu button on the left from your screen.
Tap Settings
Scroll down and tap Privacy (Tip: Checking the Back up my data and Automatic restore to preserve personal data)
Tap Factory Data Reset
Tap Reset Phone
To perform an External Manual Reset of your handset to restore to factory settings, read instructions below and then perform.(Steps on Gingerbread 2.3)
Power off the phone, press and hold the Volume up and Volume down button, then press the Power button simultaneously while powering up the unit.
Screen will come up with "Fastboot" at the top of the screen, press Volume down key to cycle through choices until you get "Android Recovery", then press Volume up keyto boot in this mode
Wait for the "triangle ! / Android" screen then go on to step 4
Press both Volume up and Volume down key simultaneously. A Recovery Menu will come up
Tap on Volume down key until "wipe data/factory reset" is highlighted, and tapPowerbutton. Another Confirmation screen will come. Tap on Volume down key until coming to Yes and tap Powerbutton
After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Powerbutton
Phone will reboot to initial setup screen.
(Steps on Ice Cream Sandwich 4.0)
Note: It is highly recommended you use the above factory reset using the settings. If you are unable to navigate through the menu to perform a factory data reset, you can follow the steps outlined below:
Power up the phone by pressing the VOL UP + VOLDOWN KEY together + POWER KEY .
The device will enumerate with different BOOTOPTIONS
Use the VOL DOWN Key to SCROLL and VOL UP Key to SELECT
Select Recovery
The device will start up with Motorola logo and power up to a little Android man logo with Exclamation mark
Press the VOL UP and VOL DOWN Key together at this screen
The device will display BLUE Text on a Black background .
Use the VOL DOWN Key to scroll DOWN and the POWER Key to SELECT the option desired .
In this case , press the VOL DOWN key till the Wipe data / factory reset is selected and press the POWER key to confirm the selection .
Use the VOL DOWN key again to select YES - delete all user data and press thePOWER key to CONFIRM .
The device will then start performing the Factory Data Reset
Once the Formatting is complete , press the POWER key to confirm a REBOOT
The message rebooting is displayed on the phone.
The device will reboot and start the normal power up sequence .

WARNING: Don't install the Keyboard Update if you hate the whine!

Don't install the keyboard update! It will fix some bugs on IOUSBFamily which allowed the mirror widget/photobooth hack.
In other words, if you install the keyboard update, you won't be able to shut your macbook up when it whines using the mirror/photobooth hack.
So unless you can't hear the whine or it doesnt concern you, don't install it.

To "undo" the patch, you need Pacifist and your Tiger DVD #1
With Pacifist open the following Package :
Your Tiger DVD/System/Library/Installation/Packages/Essentials.pkg
Then select in the file list :
System/Library/Extensions/IOUSBFamily.kext
Click "Install". It will ask you if you want to replace the files, select "Replace" (you can check the box if you want).
Then exit Pacifist, repair the authorizations of your hard drive. This will revert back to the 10.4.5 driver and should allow you to use Mirror/Photobooth and even MagicNoiseKiller.
Restart.
As always remerber that this trick modify your system folder. If something goes wrong you can screw your installation. So SAVE YOUR DATA BEFORE TO DO THIS. DO NOT TRY IF YOU DON'T UNDERSTAND WHAT YOU DO.
Hope this help.

Final Cut Suite 1 and Snow Leapard - Can't install

Final Cut Suite 1 and Snow Leopard - Can't install
"Your computer doesn't have the required hardware to run this software, see Read Me for details."
I take a look at the 'Before You Install' file, since there is no 'read me' file and it's hardware requirements are basically ancient for what this computer has.
I assumed that Final Cut Suite 1 was simply too old for Snow Leapard, but my searches are not hitting in Goggle or here at the FCP Forums.
Any ideas would be great, thanks for your time!
-Monty

What is the Final Cut Pro version included in your Studio 1 suite?
If it is a 5.0.x version, then it is Power PC only. That version will install on an Intel based Mac but exhibit some odd quirks. In short, it was incompatible to start with.
A 5.1.x version should [at least in theory|http://snowleopard.wikidot.com>, work without problems.

After upgrade iphone 4 to ios 5.01 itunes don't install some apps.

After upgrade iphone 4 to ios 5.0.1 itunes don't install many apps (ibooks too).
I try to delete them from itunes, download again and sinc with iphone, but it fail with the same message: "app_name Failed to install".
Only some Apps were correctly installed (about 1 every 8 apps).
The only way to install apps with errors is to download them directly from iphone. How to resolve this iusse?
I can't download again all apps from iphone.
Itunes is the lastest version and the Pc is on windows 7.
I had some trouble to upgrade to ios 5 (error 1 and 37 and so on) because security problem on win 7, but I relsoved them.
Thanks for your help.
Fabio

Bonjour, Here is the trooubleshooting document
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
Bonne Chance

I purchased the design suite for PC but would like to install my second licensed download on a mac. Can I do this?

I purchased the design suite for PC but would like to install my second licensed download on a mac. Can I do this?

Your Windows license might only be installed on a Mac if you install Windows emulation software.
While it might be possible to swap to the Mac platform, which depends on which version is involved, that means giving up the Windows license.

PC Suite 7.1.40.6 won't install on Windows 7 64-bi...

PC Suite 7.1.40.6 won't install on Windows 7 64-bit
Massage : Installation operation failed.
The Installation source for this product is not available. Verify that the source exists and that you can access it.

Please uninstall Pcsuite if you have already.
1. Uninstall PC Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Run new PC Suite cleaner.
3. Install latest Pc Suite.
Download latest Pcsuite from website and try : http://europe.nokia.com/support/download-software/nokia-pc-suite
or you can try to install Nokia Ovisuite and continue your work. You can download from here: http://europe.nokia.com/support/download-software/ nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Why don't installed SSIS Add-ins appear in either the Toolbox or SSIS Toolbox?

Greetings!
Why don't installed SSIS Add-ins appear in either the Toolbox or SSIS Toolbox? I have restarted Visual Studio and (heard this might work) restarted the SSIS service, but I still never see any installed add-in.
Thank you.
---------------- GeorgeS, aka "SQLPadawan"

Hi George,
What’s the version of your SQL Server? If the SQL Server Integration Services version is 2012, we should use SSDT which can be installed from Shared Features or SQL Server Data Tools – Business Intelligence for Visual Studio 2012 which should be installed
separately or installed within Professional, Ultimate, or Premium Edition of Visual Studio 2012.
If the SQL Server Integration Services version is 2014(except Microsoft SQL Server 2014 CTP2), we can only use this tool Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013.
The difference between SSDT for Visual Studio versions as below:
SSDT-BI for Visual Studio 2013 (SSDT-BI for SQL Server 2014) will support various SQL Server versions as follows:
SSAS projects can target SQL Server 2014 or lower
SSRS projects can target SQL Server 2014 or lower
SSIS projects can target only SQL Server 2014
SSDT-BI for Visual Studio 2012 and SQL Server Data Tools - Visual Studio 2010 support versions of SQL Server as follows:
SSAS project can target SQL 2012 or lower
SSRS project can target SQL 2012 or lower
SSIS project can target only SQL 2012
So please open the right SQL Server Data Tools, then based on the SQL Server version to refresh the component. For more details, please see blog post by Vaibhav.
Reference:
Interoperability and Coexistence (Integration Services)
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

Apps don't install (no SIM)

I gave my iPhone 3G (iOS 4.2.1) to my kid so that he can play (but not call: there is no SIM card).
He has an iTunes account but apps don't install.
Any idea?
Thanks in advance.

Well, you need to get a sim card for this phone. The sim card need not be activated, but it must be valid & present to reactivate the phone. You can't activate any GSM iPhone without a valid sim card installed in the phone.
Once you get the sim card: Turn off iMessage, FaceTime & delete the iCloud account, if such were setup/used on the phone. Then: Settings>General>Reset>Erase All Content & Settings. Set the phone up using your child's Apple ID. You should be good to go.

PC Suite 7.0.8.2 don't install CA-42 drivers

Similar Messages

Maybe you are looking for