PC Suite 7.0.8.2 slows down PC using Microsoft Off...

Nokia PC Suite 7.0.8.2 and 7.0.7.0 slows down PC starting Microsoft Office Files aut of Explorer.
System: Microsoft Windows XP Pro. SP3
Nokia PC Suite 7.0.8.2
Nokia 6300
Microsoft Office 2003
Since I installed Nokia PC Suite 7.0.7.0 my PC neeeds more than 15 Seconds to show any action after Mouseclick on Office - Files (Word, Excel...). It took the PC about 15 Seconds to start the application (Word) an another 15 seconds to open the file.
After uninstall of Nokia PC Suite 7.0.7.0 the PC worked normal (3 - 5 Seconds to open Word and the File out of windows explorer screen).
I installed latest version of PC Suite (7.0.8.2) and the prolem was there again.
I tried bluetooth connection and USB Cable - same result.
Starting the application (Word) and opening the file out of the application takes only a view seconds. I notice the problem only starting files out of the Windows-Explorer window.
Before using PC Suite 7.x I never had this problem - even with the same phone (Nokia 6300).
does somebody know how to solve the problem
cu
cmayer

For the issue, reason and workaround see /discussions/board/message?board.id=pcsuite&thread.id=22808&view=by_date_ascending&page=2

Similar Messages

My macbook slows down after using external HDD

When I use an external drive via usb, my computer really slows down giving me no choice except reboot.
I watched memory usage with activity monitor. Free memory decreases by time and inactive memory increases with the same amount and others don't change much. If I continue using -esp. reading-, free memory comes below to 100MB and then increases a bit -I think it starts paging =other applications' memories= to system disk-, then continues to decrease. Closing the application -that use the external- do not relese memory from inactive to free but ejecting the external does. After unplugging and trying to use the other applications, I face very sluggish performance so that rebooting becomes a better-fast choice. Both NTFS and FAT partitions produce the same result and I don't have any other partition.
If I try to re-read the same file after the external drive stops spinning (sleeps), it does not start spinning but trying to read another file makes it start spining. This makes me think about some -overdone- caching problem, but don't know what causes it and how to turn it off (Tuxero's caching is already disabled in the preferences, although I think it is only for writing only).
I made some research and found nothing specific; they tell to reinstall the os or format the drive -to HFS+ -. What is causing this?
Note: All of my drives are in Spotlight's exclusion (privacy) list and using another usb slot did not change a thing.
My EtreCheck is:
EtreCheck version: 1.9.11 (43) - report generated June 15, 2014
Hardware Information:
    MacBook Pro (13-inch, Mid 2009)
    MacBook Pro - model: MacBookPro5,5
    1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
    4 GB RAM
Video Information:
    NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
    OS X 10.8.3 (12D78) - Uptime: 0 days 1:4:54
Disk Information:
    Hitachi HTS5450 disk0 : (160.04 GB)
        disk0s1 (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 94.62 GB (48.81 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 64.57 GB (44.49 GB free)
    HL-DT-ST DVDRW GS23N
USB Information:
    Apple Inc. Built-in iSight
    JMicron Storage 500.11 GB
        BKPFAT (disk1s1) /Volumes/BKPFAT: 443.2 GB (25.08 GB free)
        BKPNTFS (disk1s2) <not mounted>: 56.9 GB
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files:
    /etc/hosts - Count: 1
Gatekeeper:
    Anywhere
Startup Items:
    TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.barebones.authd.plist Support
    [loaded]    com.barebones.textwrangler.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [not loaded]    de.jinx.SmartSleepDaemon.plist Support
    [loaded]    org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
    [loaded]    com.google.keystone.agent.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [loaded]    org.macosforge.xquartz.startx.plist Support
User Login Items:
    GrowlHelperApp
    Google Drive
    witchdaemon
    BetterTouchTool
Internet Plug-ins:
    JavaAppletPlugin: Version: Java 8 Update 05 Check version
    FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.1
    Flash Player: Version: 12.0.0.38 - SDK 10.6 Outdated! Update
    o1dbrowserplugin: Version: 5.4.2.18903 Support
    googletalkbrowserplugin: Version: 5.4.2.18903 Support
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
    Unity Web Player: Version: UnityPlayer version 4.1.5f1 Support
    iPhotoPhotocast: Version: 7.0
Safari Extensions:
    Bing Highlights: Version: 1.0.20
    ClickToFlash: Version: 2.5.1
Audio Plug-ins:
    AirPlay: Version: 1.7 - SDK 10.8
    iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
3rd Party Preference Panes:
    Flash Player Support
    FUSE for OS X (OSXFUSE) Support
    GamePadCompanionPrefPanel Support
    Growl Support
    Java Support
    MenuMeters Support
    SmartSleep Support
    Tuxera NTFS Support
    Witch Support
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
        25% firefox
         4% activitymonitord
         4% WindowServer
         1% hidd
         1% BetterTouchTool
Top Processes by Memory:
    254 MB firefox
    111 MB Google Chrome
    66 MB   Sublime Text
    61 MB   mds
    59 MB   Google Chrome Helper
Virtual Memory Information:
    1.72 GB Free RAM
    1.21 GB Active RAM
    416 MB Inactive RAM
    425 MB Wired RAM
    378 MB Page-ins
    0 B Page-outs

Thread continues as an OSX discussion here, please do not reply this.

Slow down when using SHARE function?

Whenever I use the share feature to wirelessly transfer files from my Mac Air to my Macpro everything on my macpro slows down. the mouse moves slow- windows take forever to respond- or just will not close at all. I tried switching my wireless mouse to a wire and same issue. Shouldn't the transfer be a background task? Why is it effecting the overall performance of the machine?

Your explanation makes sense; I had not considered the output size because I thought that the application would make all the necessary adjustments to the size I chose.
I was not able to find the square pixel reference (below is the advanced area) but I did resolve the issue. At first I changed the output to be 400 x 300, and while the bars still existed, they were greatly reduced. So I took a screen capture and in Photoshop measured the height of the remaining top bar at 3 pixels. So, I reduced my height in PrE7 by a total of 6 pixels to 294 and that completely corrected the issue. Thanks for your help on this.

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

Slow down while using aperture

While using aperture the system become very slow.it takes much time to zoom in & out..to open the adjustment menus
is there any way out??

Aperture is a heavy pro graphics app that is very demanding of hardware. Your Mac's CPU, GPU, i/o and RAM are all limiting to Aperture so we need to do what we can to optimize. Some steps:
• Set Previews to only be built manually, and only tell Aperture to build Previews when you are not otherwise editing in Aperture. I suggest setting the size of Previews to be the pixel dimensions of your display.
• Keep the internal drive underfilled for speed, which sooner or later usually requires using a Referenced-Masters-Library with Masters on external drives. Back up originals before importing into Aperture or any other images app.
• The Aperture Library should be on an internal drive.
• Turn off Share Previews with iLife and iWork.
• Remember that HDs slow as they fill and keep the internal drive underfilled. Approx. 70% full _maximum_ is a good guideline.
• If page outs increase significantly during operation, max out RAM and/or try to run Aperture by itself. On my C2D MBP with its max of 3 GB RAM I always did a restart prior to a heavy Aperture session to clear any memory leaks and make sure no other apps were open. Browsers in particular will often suck RAM Aperture would otherwise be using.
IMO all Aperture users who can should routinely bump RAM to at least 8 GB.
• Some users have observed that it can take a new Aperture installation time (weeks) to stabilize on slow computers. So do not panic; and allow Aperture to continue background work by not fully shutting down the computer.
HTH
-Allen Wicks

Extreme slow down when using wireless connection

I did not have a wireless network prior to purchasing the airport express and needed this as I purchased a macbook. My intention was only to use this device as a wireless network. I have my cable modem connected to a linksys router which is connected to the airport express. The internet connection on my macbook is extremely SLOW! I have reset and reinstalled my airport several times, called apple support and trouble shoot for over an hour, however still experiencing the same problems...slow internet connection. In my troubleshooting I have determined that cable modem and connection, router and airport are all working properly. So the only other thing is interference issue. I've tried changing the channels, use interference robustness option however still no results. I just want my laptop internet connection to work fast. This is my last hope otherwise I'm going out tomorrow to buy a wireless Linsys N router. Any suggestions????

Well it turned out to be a DNS configuration problem on the MacBook. If you go to Networks-Advanced in the System Preferences for the Airport connection, then select the DNS TAB. In there I had a spurious DNS entry. I deleted the one that was manually entered in (it's in black text) that way the one I received from the Airport Express was the only one in there (it is greyed out and you can't delete it.)
Hope that helps.

Indesign 2 slows down to a snail's pace after 10-15 min. Help!

I have used Indesign with Creative Suite 2 Premium for a few years with no problems. About 6 months ago I bought an external hard drive to use as a back up device for my hard drive. Not long after that I had problems with my computer and figured out that the external drive was causing a problem with startup of the hard disk. So now I leave it turned off except for times when I want to back up files. I give that history because that's the only problems I've had. A few months ago I had the same thing happen with Indesign slowing down after use. I've tried having it as the only program running. I've tried only using it after startup. Nothings seems to make a difference. I have to reboot the computer to get it to be functional for about 10-15 min. All other programs on my computer are running normally including Illustrator and Photoshop. Should I just upgrade? Uninstall & reinstall? I don't know much about changing my system settings or the super technical stuff. Any help or suggestions would be appreciated.

There are a lot of things that can cause slowdowns.
Disable Version Cue if you don't use it, for starters. Then look at the hard drive. How much free space do you have? Empty the recycle bin and the temp folders, and defrag.
Run virus and spyware scans. You might be surprised by what's running without your permission and using system resources.
Peter

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Why does Photoshop keep slowing down?

I've been using Adobe Photoshop CS5.1 for two years now, and for some reason it seems to have the problem of slowing down after using it for a while, so if I'm working on a project I have to keep closing it and reopening it to get it fast again. It's weird because it doesn't seem to matter how much stuff is on the canvas, it's just how much I've drawn and hit undo and erased or did anything, After like 5 minutes of straight work it just gets too slow for me to work in, like when I switch tools or change the color it takes a couple seconds to respond. So literally every couple minutes I have to restart Photoshop and open the same file.
What's really odd is that sometimes Photoshop will work perfectly fine and stay lightning fast for hours. Like, for the last couple of months it's been 100% fine, but since a few days ago it started to have this "slowing down" issue again. Every couple months it seems to decide to be perfectly fine or just really annoying. I didn't change anything in my computer.
It can't be my computers specs or my settings in Photoshop, but I will tell you all of that anyway.
OS - Windows 7 64-bit
CPU - Intel Core 2 Quad Q6600 @ 3.0GHz
RAM - 12GB DDR3 @ 1333MHz

There is no malware scanner running, in fact I have tried closing out all other applications and unnecessary processes to help improve performance. No luck.
Also, my post actually wasn't quite finished, but my internet shut off on me last night and I guess that just automatically posted whatever I had done before then. What's even better is that the forums won't allow me to edit it. What great features!
Anyway, here's the FULL spec sheet of my computer...
OS - Windows 7 64-bit
CPU - Intel Core 2 Quad Q6600 @ 3.0GHz
RAM - 12GB DDR3 @ 1333MHz
GPU - NVIDIA GeForce GTS 450 1GB
Storage - 1x 128GB SSD (OS installed on), 1x 750GB HDD, 1x 160GB HDD
I have the 64-bit version of Photoshop CS5.1 Extended, installed on the SSD. Here's the settings I have in the preferences:
Memory Usage - 100%
Scratch Disks - All 3, SSD 1st, 750GB HDD 2nd, 160GB HDD 3rd
History States - 100
Cache Levels - 8
Cache Tile Size - 1028K
I have fiddled with these settings and restarted Photoshop countless times. In the end it's the same exact result: Photoshop slows down after a few minutes of work and I have to restart it. I have about 50GB free on the SSD, 150GB free on the 750GB, and about 140GB free on the 160GB.
I don't understand why it gets so slow even when my RAM usage only makes it up to about 45%. Why doesn't it just utilize ALL of the memory like I told it to?
I've tried setting cache to 1, 2, and 4, same result. Cache tile size to all the different settings, same result. History states to an extremely low level like 10, same result. I just don't understand why Photoshop is doing this, especially because it decides to speed up on its own every couple of months...

Any security update slow-down problem occuring ???

hi all,
My macbk has slowed to a crawl on the net. connecting from one site to another takes up to 20 seconds. I've done permissions / onyx/ scripts/ reset safari & camino /cleared browser caches and each time it speeds up a bit but within a few minutes online it's slow again. hangs up initially at "looking for..." in the bottom bar and shows highlighted bar hung right before "www". OR at the "go to" / "contacting" stage at the same WWW
The only thing I can think that I did at about the time it began slowing down was , using software update (which I rarely use- normally download directly from the apple site, but got momentarily lazy!).
My Techtool pro is 4.2.1 and won't run on my intel apparently - or so it says in the dialogue box and when I try to download and install the incremental update it says it can't find where to install. so I am stuck with out it at the moment.
If it weren't so rare I would think I had a WORM. but that IS rare on a mac I think.
so thinking about possible linked problems with that security update.
anyone heard of any problems ?
I do have applecare, so if all else fails I can call them I guess
Message was edited by: Sue brown1
Message was edited by: Sue brown1
Message was edited by: Sue brown1

You're Welcome Sue!
I forgot about some of the cool options in the Safari View contextual menu, so thanks to your previous post, I took a look.
I haven't been exploring my system enough lately!
And Thank You, for extending the courtesy, of awarding in  Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b

When I attach my Samsung Galaxy Note 3 Sview case my phone slows down. Has any one experienced this?

After getting an S-view case for my Note 3, I noticed many of my apps slowing down during use. When I remove the case, the phone acts normally. Also, when I go to the sview settings to add weather, it prompts me that settings has stopped working and it does not add weather to the s view. Has anyone experienced this or know of a fix?

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Imovie '8- SPEED UP/SLOW DOWN

I know that the speed up/slow down option was taken off of imovie '8. My question is, what do I do? I have heard through the grapevine that you can download imovie '6 which does have that editing option, but I can't figure out how to do that? thanks for your time.

1) Upgrade to iLife 09
or
2) A free option is to use JES Deinterlacer. Karsten Schluter has a [tutorial on his excellent web site|http://sites.google.com/site/karstenschluter/slowmowithim08].
There are no legal free downloads of iMovie 06.

How to test hardware on an old MacBook Pro that is slowing down.

I have the very first-gen MacBook Pro 2.0gHz Core Duo, 2gb ram. I have been using this laptop as my primary since I got it, mostly for development work (Java, Objective-C, Web, etc), but also email, general web surfing, and the occational game (although, not in a while).
Recently, I noticed things were starting to "slow down". Well, not slow down so much as things would get long pauses. For instance, I hit a site in Google Chrome, and the app sits there for like 20-30sec of longer, as if the window is frozen, then *poof*, it draws the page. Sometime, Chrome will even pop up asking if I want to kill the page. It is not the only application that seems to be suffering from this, I just spend a LOT of time on the web, so I tend to notice it much more.
Even more recently, my SpringSource Tool Suite (STS, a custom Eclipse with a bunch of SpringSource plugins) started acting up too. Mostly when I start the Roo Shell and execute a command, STS (read Eclipse) will show the command as "executing", but it seemed to never run. I thought it was maybe a problem with STS or the Roo Shell plugin, but yesterday I ran something as a test, then got a phone call and didn't come back for some time. To my surprise after more than 40min of just sitting there the command ran. Once it ran, it ran in full, normal speed (the command I ran was to rebuild the Eclipse project files using Maven). So, what I thought was frozen was merely paused for a long period of time, just like what I was seeing in Chrome.
So, this has lead me to believe I either have some sort of hardware issue, some sort of heat issue (I have seen this on Wintel laptops where the processor "speed steps" down to almost 33mHz), or some sort of software issue. I really don't want to have to re-install OS X, if I can avoid it. I did boot off the original disks that came with my laptop and ran the Hardware Test, but it came back with no errors. I have iStat Pro installed as well, and the fan speeds are usually around 1800-2000rpm, sometimes jumping to 4000+rpm. CPU tempuratures report around 151º. I also ran the Disk Utility off my 10.6 disks. I do know that my DVD burner no longer burns disks, but it hasn't for more than a year.
Laptop specs:
- MacBook Pro, Model MacBookPro1,1
- OS X 10.6.8
- 2.0gHz Core Duo w/ 2gb DDR2 RAM
- Toshiba MK3252GSX 320gb HDD (replacement for factory 120gb HDD over 1.5yrs ago due to space issues)
- I recently replaced the battery, as the old one had expanded. I use the laptop on wall power 99% of the time.
Thanks,
Mike Bauer

As mentioned above, I did do this. What I am not so certain is how intensive this test is. Stated another way: If this was ran and passed 100%, does this mean everything on my laptop is 100% functional, like the fans, processor, cooling, memory, etc? The drive also checked out when I did the Disk Utility from the 10.6 install CDs, and the S.M.A.R.T. check indicates no disk errors.
Maybe I should take it into a Genius and have them look at it. Just not sure how much that will cost me, and its an old laptop, so I don't want to put too much into it.

System has slowed down considerably after updates from Apple. Is SyncServer the culprit?

I use MacBook with preinstalled OS Leopard since April 2009. I have also regulalry updated my computer system using the Software Update application. However, since my last update on 12th Aug 2011, I have noticed that my system has slowed down. There is long pause between every character I type, delay in switching applications, battery dries out quicker, slow response to every command.
I have started facing this problem after updating following software like iTunes 10.4, Safari 5.0.6, Migration Assistant Update for MAC OS Leopard & Quick Time 7.7 from Software Updater. Although, my OS is still leopard.
I noticed on the Activity Monitor that syncserver is using majority of my RAM and reappers even if I stop the process. Some of its subprocess like AddressBookSync also appears and consumes lot of memory. Is this the problem? Though, I never noticed earlier what size it consumed.
I use Microsoft Office suite for Mac and have also checked and deselected all sync services. Yet, the Process (PID 305) continues to appear in Activity Monitor.
I am no techie, and would appreciate quick help to resolve this issue.
Thanks!

I was just about to write the same problem, but I don't have VMware; my laptop is late 2008 was running Snow Leopard (uptodate version).
I've scientific softwares so probably would require a clean re-installation of ML. I MUST MENTION HERE that those software which were written for PPC will NOT work on ML. Just found out that one of my important softwares version won't work on ML; need $500 to upgrade that software .
Therefore, I'd also want to know how can I go back to SL.
I'll let you know how clean re-installation has worked.

Will moving from Tiger to Leopard speed up or slow down my Dual 1.25GHz G4?

I'm currently running Mac OS X 10.4.11. If I upgrade to 10.5.8 (which I believe to be the final version of Leopard) do people feel that overall my Mac will run (& feel as if it's running) more quickly or more slowly?
My experience with Macs (17 years worth) tells me that, other things being equal, a newer OS normally slows down a given set of hardware. Also, according to the graphic on this page, the guts of Leopard appear to be very similar to Tiger. However I'm hoping against the odds that in this case Leopard might give me a speed boost.
I can't think of any features that Leopard has that Tiger doesn't that I'd like to use or that I feel I'm missing out on. It's just a possible speed boost I'm after, along with compatibility with the odd utility etc. that requires 10.5 or higher.
My main application usage at the moment is as follows: Microsoft Entourage 2008 (version 12.2.7) for email (although this may change - see my Topic here), Safari 4.1.3 for web browsing (& also occasionally Firefox 3.6.12), iTunes 9.2, QuickTime Player 7.6.4, and also more demanding creative software - primarily Adobe's Creative Suite CS2 (although I'll probably be upgrading to CS3 in the next few months) and occasionally things like Final Cut Pro 5.0.4.
Many thanks.

Leopard makes a few improvements in performance over Tiger especially in the graphics and video area. Otherwise you would not notice any changes in speed.

PC Suite 7.0.8.2 slows down PC using Microsoft Off...

Similar Messages

Maybe you are looking for