PC Suite 7.0 fails to recognise connection

Hi,
I have installed the latest version of Nokia PC suite (version 7.0.8.2) and I am using Windows XP home edition with service pack 2.
My problem is that whenever I try to connect my phone (6500 slide) via the “connect your phone” link on the pc suite main screen, it fails to recognise that my laptop has any connections whatsoever i.e. USB, Bluetooth or infrared. Therefore, I cannot connect my phone and it directs me to the Nokia PC suite FAQs section which I have visited and I have tried many solutions from there. Whenever I connect my phone via the USB cable(CA-101), my laptop recognises it is connected but PC suite doesn’t. My phone also prompts me to select either the pc suite mode, printing or usb mass storage mode. When I do select the pc suite mode on my phone nothing happens.
Strange thing is that I was using PC suite before and it was working perfectly for a day or two.
Here is the list of things that I have tried:
1) Uninstalled and re-install pc suite program, did not work.
2) I have tried the 10 step solution posted by “mcrasm” which includes taking the sim out of the phone but pc suite still doesn’t seem to recognise a connection.
3) I have downloaded pc suite cleaner v3.6 which is not compatible with the latest version of pc suite v7.
4) I have tried to repair the usb cable drivers but this has not worked.
5) I have tried to repair nokia pc suite via control panel but this has not worked.
6) I have done a clean uninstall, i.e. using pc suite cleaner and then re-installed the program but the same problem still flares up
I would be grateful if you could help me out with this problem. I have looked in this forum for people who have similar problems but could not find any. I apologise if I am repeating a thread. Many thanks in advance.
Kyzer

Thank for your reply. I am using VISTA HOME PREMIUM, Dell Insprion 1525, 32 bit. Well, PCSuite tells me that the requested back up has been done. But when I sync the phone it only installs the contacts, applications and some other settings. But not the calendar and notes. I did this before with another laptop (also Vista) and it went well. Has this maybe to do with the new 30.0.015 ? Rather frustrating. Because as I said before,I can see the calendar and notes back up's in my files and more and less read them with notepad. But thats all.

Similar Messages

PC Suite support installation failed error message...

Every time I start PC Suite and do a sync (of calendar, notes and contacts) with my Nokia N78 phone - I get the message:-
The PC Support installed on your phone must be updated to support new features.
Do you want to update PC Suite support on your mobile phone (Phonename)?
If I select the 'Yes' tick, I get a message
Installing......
Accept all possible installation requests on your device. (There are no requests on my phone.)
quickly followed by a message:-
PC Suite support installation failed.
The sync itself always works; it is the accompanying request to update the software that fails. The s/w on my N78 phone is 11.043 dated 21-05-2008 custom version 11.043.240.2 custom date 13-06-08. If I do a 'check for updates', I get the message "No updates available". I am running Windows Vista Version 6.0.6002 Service Pack 2 Build 6002.
I have read the forums and tried the following:-
Reset the date to two years earlier in case there was a out of date certificate error. - This had no effect.
Checked the Application installation settings on my phone (Application Manager - Software installation set to 'All', Online certificate check set to 'Off'.)
Uninstalled PC Suite and used the PC Suite cleaner 7.1.1. software twice to confirm all remnants of PC Suite (rebooting in between) and then re-installing . This had no effect.
Tried installing Nokia Suite (as against PC Suite) and had similar results. ie the sync worked but it tried to install software and then failed.
Tried installing OVI suite and get similar messages.
Any ideas how I get rid of this error message?

thanks I know that, I have done all that before and it didnt worked.
I tried to connect it onto another pc and it worked there and it's working now on my pc too, I have two c5 earlier one gets recognized as soon as I plug it, but the new one takes time and sometimes is recognized as an mtp device, I uninstall and reinstall pc suite and connected the new c5 first and it still took about a minute to get recognized and my old c5 it got recognized as soon as I plugged it in. .

PC-Suite 6.83.14.1 - PC Connectivity Bluetooth Mod...

Firstly System Details
======================
Phone Model: Nokia 6680, Operator SFR
Operating system: Microsoft Windows XP Service Pack 2
Nokia PC Suite: Version 6.83.14.1
Connectivity Cable Drivers: Version 6.83.9.0
PC Connectivity Solution: Version 7.7.10.0
Bluetooth stack: WIDCOMM Bluetooth stack Version 4.0.1 Build 3000
=========================
Problem Description:
=========================
After pairing with PC the PC-Suite application installs the Modem "PC Connectivity Bluetooth Modem". When I launch from PC-Suite "Connect to the Internet" and configure settings I am able to select the Modem and the operator profile. When I attempt to connect using this application I receive an error:
"Failed to connect to the network! The modem may be used by another application or the modem may not be configured properly".
Under windows device manager if I try to run diagnostics on the Modem it spits out an error " The port that the modem is attachedcould not be opened. This may be the result of a hardware conflict. However Device manager reports no hardware conflict!
This is the otput og the log:
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
05-04-2007 13:08:33.203 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
05-04-2007 13:08:33.203 - Modem type: PC Connectivity Bluetooth Modem
05-04-2007 13:08:33.203 - Modem inf path: oem74.inf
05-04-2007 13:08:33.203 - Modem inf section: PCCSModem
05-04-2007 13:08:33.203 - Matching hardware ID: 7efa569549814b2f8d267b9a5f21ba0f_pccsmodem
05-04-2007 13:08:33.203 - Opening the modem device failed with error 00000002
This worked in the previous version of PC-Suite.
I have tried to re-install , clean out previous settings etc etc... I can workaround for now with my USB cable but any pointers as to what is worng would be most helpful.
Thank you all in advance.

I had the same problem as this on a Nokia E51.
The general solution to this problem for any phone.... from first principles...
1... Delete the Modem entry for the phone, in Phone and Modems,
       Control Panel.
2... Delete the RFCOMM Protocol TDI in Device Manager.
3... Delete the pairing for the phone in Nokia PC Suite.
4... Unpair the computer in your phone handset
5... Re-Pair the phone, and test its paired and connects
       in PC Suite.
6... Rescan for devices, Device Manager.
       This will reinstall the 'RFCOMM Protocol TDI' in Device Manager.
7... Check you are connecting to the correct access end-point for your network.
       You can...
            7.1... enter the correct network address in the PC Suite
                      'Connect to Internet settings', Access point box.
                       If you configure the connection manually,
                       there is a greater chance it will work, as opposed to auto.
                      OR
            7.2... enter the correct network address in the modem Properties,
                     Advanced, 'Extra initialisation commands' box.
Extra Initialisation commands for the UK Vodafone network would be
      +CGDCONT=,,"wap.vodafone.co.uk"
If you choose the 7.2 option you don't need PC Suite open to connect in future. You can simply find the connection in Start Menu, 'Connect to' menu. Either 'double-click', or 'right-click | connect' and you will be connected.
This network connection is normally created by PC Suite. If you play around with it and connections start failing, you could 'right-click | delete' and set it back up in PC Suite. to reinitialise it back to sensible settings - remebering to re-enter your network access end-point.
That should deal with any hosed connection, whatever the reported reason on connect.
Happy browsing :-)

Nokia PC Suite + XP SP3 + N70 + CA-53 + Connect = ...

I have XP SP3 with all updates from Microsoft. I am using the latest Nokia PC Suite (7.1). I use my Nokia N70 as modem to connect to the Internet using GPRS and the USB cable CA-53.
I did not have problems on XP SP2 but on XP SP3 my computer crashes and reboots as soon as PC Suite tries to connnect to the device and send the username/password. Modem diagnostics work fine using modem driver from the device manager.
I have older mother board Asus P4S800MX with SiS chipset on a desktop system. I have uninstalled and reinstalled, repaired and tried many things but it always goes back to this problem.
I thought I fixed it and it worked but then after reboot it failed again. I think problem must be related to what Nokia does when connecting to my N70 as a modem for GPRS connectivity to the Internet via the CA-53 USB cable.
I can communicate with the phone using contacts and see messages in the Nokia PC Suite when it is started, so it appears that the USB driver is working well to communicate with the phone but using the phone as an Internet modem, I get a crash (no blue screen just a reboot).
Here is the funny part, I ended up installing Linux Ubuntu 8.10 Intrepid on my same Asus P4S800MX desktop and had no problems connecting to the Internet using linux and my Nokia N70 using the same USB CA-53 cable... without the use of any special linux software... just the standard installation of Ubuntu. So I have confirmed that my problem is not hardware related. Also did extensive memory tests of my computer and no failures.
If anyone as any ideas of how I might solve this problem or even how to go about troubleshooting.. that would be greatly appreciated. I have ensured all driver files exist for Nokia Suite related devices as well by examining driver details. I even installed a clean version of XP and all the updates for SP3 and the problem still happens. I am thinking that perhaps SP3 and Nokia PC Suite has some problems with my older N70 phone.
I have searched the Internet for anyone else having my problem but it seems hard to find so I am left with either giving up on Windows when needing the Internet and converting to Linux (Ubuntu) permanently.. and loosing some of the windows things I enjoy.... like video chatting on MSN and Yahoo.
If you can give me suggestions, please don't be scared to include advanced debugging techniques because I am a programmer/analyst.
CONCLUSION:
Nokia PC Suite + XP SP3 + N70 + CA-53 + Connect = CRASH!!

Hey...sorry if you are expecting for an answer but I would like to inquire to you my problem, hoping that you have through this also or someone asked you of the same problem
This is my problem...when I used NokiaSoftwareUpdater, my memory card then have a password which I never remember putting...I have gone through the discussions and I have found out that many too have the same problem... What am gonna do..plss help...

Data Quality - Failed to create connection to MDR.

Hi All,
I have installed Data Quality 11.7.2 on windows 2003 server using SQL 2005 (Both SQL 2005 server and Data Quality are in the same server) , The install was successful. But when I try to Open 'Data Quality Project Architect' it throws an error
Failed to create connection to MDR.
Driver error messgage = qodbc_mssql:
Unable to connect, Database error message =] [microsoft][odbc sql server driver]
[ tcp/ip sockets] sql server does not exist or access denied
I checked the ODBC connection and tested it successfully too.
I am not able to pass through the 'Meta Data Repository Connection' as its failing in 'Setup SQL connection option'
Any help is appreciated !!!
Thanks
Ranjit Krishnan

Hi Paul,
Thanks for you reply, OBDC connection was created under System DSN, also tired the users DSN option too, but did not work.
Recreated the ODBC connection many times still no luck.
The 'Project Architect' client and the MDR (SQL 2005 Server) are on the same machine.
Thanks
Ranjit Krishnan

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

Secure link to itunes store failed computer not connected to internet tried ununininstalling everything to do with itunes no joy also error code coming up E0000225 anybody out there got any ideas

Secure link to itunes store failed, (computer not connected to internet tried uninstalling everything to do with itunes,no joy also errror code E0000225 appearing. Have turned off windows firewall and also my Bullguarg security settings.Can anybody out there please help me thanks.

Hi,
You could be right that the response to clicking on help is a symptom of an entirely separate issue, but nevertheless the secure link to itunes is definitely failed, and I am unable to log into Itunes on either PC.
I also noticed that even if I click on the link to create a whole new Apple ID, I cannot do that either, presumably because the secure link is not working.
After I noticed that there were weird things happening this morning, I did change my Apple ID password in the hope that this might resolve it, but it seemed to make it worse. Now, all of my apple devices keep constantly prompting me for the apple ID password, and randomly either accepting it, or telling me it is wrong. I know the password is correct because I can log onto the apple Manage My Apple ID screens in a web browser with it.
I was starting to think that this is an ISP issue (BT Broadband), but I have not seen anyone else posting with the same issue. Does Apple use a different security protocol to everyone else? I'm asking because all other secure services seem to be working fine, but anything related to apple that requires a secure connection or authentication is having issues.
I have also seen reference to making sure that Itunes is listed as an allowed program in Windows Firewall. I cannot seem to do this because it says that my Windows firewall is being managed by McCafee. I have checked the settings in McCafee, and it appears to me that Itunes, Bonjour, and many other apple programs have been granted "Full" access. As said before in any case I have tried temporarily disabling the firewall and even this did not solve the problem.

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno      00
M sid        SED
M systemid   562 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    32
M intno      20020600
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          22784     (1752)
M DpShMCreate: sizeof(tm_adm)          5912704     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.024) Default value for max. input variables is 2000 (note 655018)
C    (0.024) Profile parameter to define max. input variables (note 655018)
C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C    (0.024) Input parameters for SQL statements increased (note 655018)
C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C    (0.018) More trace in case of packed to string conversion error (note 1262799)
C    (0.016) R3trans export aborts with signal 6 (note 1262245)
C    (0.009) IA64 alignment errors (note 1245982)
C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports keepAlive indicator   : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
M
M Info for wp 0
M
M    pid = 212
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 16 23:57:33 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10783
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key         :DEFAULT
Username    :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIE

Dear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE

Failed to load Connection...

Dear all,
Now that I'm able to use and publish my projects properly, I'm facing a "Failed to load connection" on my first report, on my production machine.
I'm using on my development machine SQL Server Express, and getting connected via an ODBC connection for my Web .NET project. This works fine, but on my production machine, although I have created the same ODBC connection (same name, same sql instance) the error "Failed to load Connection" is raised.
"GabillySAS" is the name of the ODBC connection. I've used the Help file provided for Crystal Report 2008 with Visual Studio 2008, so the code is :
private void Page_Init(object sender, EventArgs e)
          ConfigureCrystalReports();
       private void ConfigureCrystalReports()
            CrystalReportViewer1.ReportSource = Server.MapPath("\\content\\heures\\rapports\\"+Request.QueryString["id"]);
            ConnectionInfo connectionInfo = new ConnectionInfo();
            SetDBLogonForReport(connectionInfo);
            connectionInfo.DatabaseName = "GabillySAS";
            connectionInfo.UserID = "----";
            connectionInfo.Password = "-----";
        private void SetDBLogonForReport(ConnectionInfo connectionInfo)
            TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
            foreach (TableLogOnInfo logOnInfo in tableLogOnInfos)
                logOnInfo.ConnectionInfo = connectionInfo;

Hello. Victor;
I see two things that may be the issue.
1. You appear to pass the ODBC DSN name to the Database property
2. Fill the ConnectionInfo variables before passing to LogonInfo.
It should be:
public partial class _Default : System.Web.UI.Page
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = "DSNname";    //ODBC DSN
        connectionInfo.DatabaseName = "DBname"; //e.g. Northwind
        connectionInfo.UserID = "userID";
        connectionInfo.Password = "password";
        string reportPath = Server.MapPath("ODBCconnection.rpt");
        crystalReportViewer.ReportSource = reportPath;
        SetDBLogonForReport(connectionInfo);
    private void Page_Init(object sender, EventArgs e)
        ConfigureCrystalReports();
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = crystalReportViewer.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
Does that work as you expect?
Elaine

Error in Crystal report( built on Universe) preview in CMC - Failed to load DB credentials or Failed to open Connection

Hi,
      I created a Crystal Report (CR XI r2) using Universe and database is Db2.
     My report is working fine in Crystal report ,.But when i am uploading this report (Save AS ->enterprise) to repository ,and then trying to preview this report from CMC/Infoview,it throws error "Failed to load DB credentials "or sometimes it throws" Failed to open Connection" .
I have given DB user credentials correctly and used both option "prompt user for DB logo" as well as "use same database logon" .
I am not sure why it is throwing this error.I checked both "Bo server machine as well as Client machine ,both are having DB2 cleint installed and configured.
Is this an issue with Service Packs ?
As my machine configuration is -
     BO Client - BO XI R2 RTM + SP1+SP2
     BO Server (Linux) - BO XI R2 RTM
If anybody faces the same issue ,please share the solution with me,as it is very urgent .
Thanks
Nitin

Hello,
Thank you for your post.
Based on your description, your issue is out of support of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest that you can consult your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
  for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PC Suite 7.0 fails to recognise connection

Similar Messages

Maybe you are looking for