PC Suite 7.1.30.9 hangs on instal with Vista Busin...

Was getting error messages with npcs so installed the latest version (probably the one I already had installed) 'over the top
All went fine until reboot
after inserting my password when requested on start up
in the top rhs was a small dialogue box with the message 'setting up ms windows mail 7'
which is odd, seeing as I use outlook 2007 sp2
I waited 15 mins but there was no disc activity
so did a hard shutdown and restarted
I did try a sync, but there were no items updated, error 'outlook may be from another place ' or words to that effect
What do I do now?
tia
David

http://www.nokia.co.uk/get-support-and-software/download-software/main/extras/pc-suite-cleaner
Download and run the PC Suite cleaner application.
That should clear out any old rubbish that is left behind. Then download a fresh copy of PC Suite and install it.
Shunts..
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

Nokia PC Suite 7.1.30.9 won't install on Vista Ult...

Hi there,
I'm having a problem with Nokia PC Suite for my 6300 phone.
My phone IS NOT connected to the PC.
I've downloaded the latest version of the program.
My computer specs are more than enough.
Yet for some reason the install stops progress at 74%. The images below the install status bar continue to cycle but the bar has been at 74% for 2 hours now. I've tried the install on my work computer as well, also with similar specs and Vista Ultimate 64-bit with the same results. Install seems to hang at 74%. There is no error it just seems to hang.
Any advice??
Solved!
Go to Solution.

Haha, that's too funny, seconds after posting my question the install finished.... 2.5 hours later!!

Ovi suite 2.2.1.23 will not install with Xp/SP3, o...

I got a new N8 on 24 Oct 2010 - lovely phone. I downloaded latest Ovi 2.2.1.23 and tried to install it in XP Pro /SP3 PC which has all the latest fixes, and also PC suite installed. . Installation completely failed, and uninstall also failed . Now left with system telling me that it cannot uninstall older version of Ovi.
Tried again on another XP/SP3 PC which had never had any Nokia s/w on it. Install went OK but Ovi crashed immediately I tried to sync calendar or contacts on N8 with Outlook 2003, and keeps crashing despite several install & uninstalls.
Nokia tech support tell me that
1) PC Suite does NOT need to be uninstalled before installing Ovi.
2) N8 & Outlook 2003 ARE (or should be) supported by Ovi 2.3.1.23
3) They do not have a solution to this problem!!!!! Only recommendation is to revert to XP/SP2 but I won't do this because Microsoft no longer supports SP2.
My solution: sadly to return phone to O2, and choose one from a different manufacturer.
What a shocking tale.

sorry -meant to add that PC suite works well with XP/SP3 & older phones such as 6630 6230 6300 but it does not support N8, so I can't use that option.
Come on Nokia - you've already lost my business, but what about all your other customers?!

Ovi hangs while synchronize with MS Outlook

Ovi suite: 3.0.0.290
The Ovi suite hangs while synchronizing with outlook. Without the outlook-synchronisation the phone itself is useless to me.
See http://wtrns.fr/U-4pdrP4dOlnRO for the dumpfiles
with kinds regards.
Marcel Verberg
Solved!
Go to Solution.

Hi,
I found the solutions in the discussion link below:
/t5/PC-and-Mac-Software/PC-Suite-amp-E7/m-p/927229/highlight/true#M44166
Get ride of the ovi-suite and get the supported PC suite 7.1.40.6
And everything is working fine, updating, synchronizing outlook calender and contact.
Now I can finally use my E7-00!
Beware: do not update the pc suite, the latest version does not support the E7!
Enjoy!
Greetz, Marcel

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

Internet Security Suite does not work with Vista 64 bit

After attempting to use the Chat Help, twice, and spending hours in queue before getting kicked off, I finally called Support to find out why my new Vista computer was not running the Internet Security Suite that I downloaded. Yes, I found the link to "download to a second computer" and went thru all the steps. Got lots of positive feedback: little bars were filling in letting me know I was 40%, 72%, 100% done, etc.. Was given a window allowing me to Run or Don't Run the software. It all seemed to go very well. However, when the "download and installation" was complete, there was no new software running anywhere on my computer. Couldn't find it in the Control Panel, the Start menu, or the system tray. Called Support and spent at least 30 minutes on the phone with a "technician" (and I use that term VERY loosely) who had to have major assistance from a co-worker before he could even start screen-sharing with me and, during the course of our time together, made the following brilliant remarks:
Upon seeing my desktop wallpaper (which is a lovely photo of some cliffs and a lake - and it came with Vista), he wanted to know what the picture was. Not where it was taken, but just what it was. His exact comment was "Does your screen always look like that?". I had to dig deeper to determine if he was asking about a particular icon or some other computer related concern that he saw (he was "technical support", after all), but he was just asking about the stupid photo.
He couldn't find the Control Panel in the Start Menu until after trying several times, and then he couldn't navigate to the Programs area very well (I had to give verbal hints as to where it was), and his brilliant comment then was "I really need to go to my mom's house and get on her new laptop and try out Vista." Can you believe that Verizon has technical support folks who have never used Vista? It's not like Vista just came on the market yesterday!!
So, when he finally decided that he was not going to be able to help me, he didn't offer me any other recourse. He just stated over and over that he was not sure how to solve this issue. Oh, and this was after I re-downloaded ISS (again, "successfully"). I had to ask if there was someone else there who could possibly help me. He offered to put me on hold (for the 2nd or 3rd time at this point) to check around. When he returned to the phone, it was obvious that someone else was operating the mouse in the screen sharing mode because the operator moved confidentially around the screen and went immediately to system properties and saw that I am running Windows 64 bit. The other operator then told my guy to tell me that ISS only works with Windows 32 bit. Their final resolution was that I should call billing on Monday and end my subscription. I think that may be the only good advice I was given that day.
So, am probably going to renew my trial version of Norton on this new computer and remove ISS from the laptop and put Norton on there as well. Apparently, they are up to date with this fancy new technology. At least they probably know about sophisticated and highly technical stuff like desktop wallpaper.

I have been trying to get somewhere with this Internet Security Suite...and now have come to the conclusion this is not going to work. Now running Vista 64 bit, and have gotten nothing but the run around to try to complete the downloading of the program. I've contacted Verizon Tech Support...then tell me that this works with the 64 bit but I need to contact Windows as there is a glitch and they give you the steps to get thru it. Windows advises me to contact Verizon again as there are no problems with the OS. Also have contacted Radialpoint and once again nothing...Obviously the Secuirty is not compatible with Vista 64 bit yet, which I just can't believe like you said...it's not like it was just yesterday this OS came out. My frusteration comes from nobody steps up to take any responsibility as to what the problem is. If it is not compatible yet then say so and not waste my whole weekend trying to get a straight answer. I have other computers that I am currently using the service on and do like the program, but as for my Vista 64 bit looks like I may go to Macafee for protection. It just amazes me as big as Verizon is and as popular this Vista has become they are not on the ball in keeping up with technology.

Adobe AIR installation issue - hangs at "Installing..."

Hello everyone!
I know questions similar to this have been asked many times before, but I did not manage to find the solution to my problem after a few hours of reading and trying the various 'solutions' around the net and this forum. I apologise if I missed it.
I cannot seem to install Adobe AIR. I run a freshly downloaded installation executable, but it hangs at "Installing..." and 0% progress for a very, very, very long time, if I let it. This last try has been going for 45 minutes as I write. The only way to get out of the installer is through Task Manager and killing the service, as hitting 'Cancel' just makes the installer attempt to cancel endlessly.
I tried installing it in safe mode but there it gives an error saying I may not have administrative permissions (which I do have);
I created a new user account;
I "run as Administrator" and am using an account with administrative rights;
I tried it through the command line with putting the file in c:\ and running "AdobeAIRInstaller.exe -silent" without quotes from c:\;
I have shut off all my antivirus software;
I tried downloading it with a different browser;
I tried using the MicrosoftFixit.ProgramInstallUninstall, and took Adobe AIR off the list;
I tried uninstalling all Adobe products and then reinstalling them, with Adobe AIR last
... and some more things, but none of this has helped. Here's what the installation log generates when it hangs:
[2012-12-25:01:16:36] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
[2012-12-25:01:16:36] Commandline is:
[2012-12-25:01:16:36] No installed runtime detected
[2012-12-25:01:16:40] Relaunching with elevation
[2012-12-25:01:16:40] Launching subprocess with commandline c:\users\terri\appdata\local\temp\air7b85.tmp\adobe air installer.exe -ei
[2012-12-25:01:16:40] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
[2012-12-25:01:16:40] Commandline is: -stdio \\.\pipe\AIR_7668_0 -ei
[2012-12-25:01:16:40] No installed runtime detected
I would much appreciate any help or advice anyone can give me regarding this! This is starting to drive me nuts.
Thank you.
( also, this is my first post, so please forgive if I've done anything wrong or not according to etiquette! )

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

Power mac G4 hangs at startup with gray screen

Hello all,
I have a Power mac G4 - mirrored drive door model. 512mb of RAM; 833mghz - about 50+ gigabytes of storage remaining.
I recently starting using this mac again, here is what happened:
Power mac G4 was running 10.2.1 - had never been updated; it also was capable of running classic os9 (even though I never used it)
Started using machine again a few weeks ago; let "software update" install 10.2.8 update - everything worked fine
Put computer into target disk mode to transfer files to my new macbook pro (13") - using firewire connection
While trying to connect (migration assistant) - window froze will calculating the amount of space that the "user" on the power mac totalled - power mac appeared to be frozen
Did a hard reset / power down of the power mac G4
Upon restart, power mac G4 goes through all start up functions up to gray screen with apple logo (with spinning wheel) and then goes to a darker gray screen (without the logo) and spinning wheel
Dark gray screen with spinning wheel hangs indefinitely - I've let it stay there for hours on end hoping it will resolve but it doesn't
Here's what I have done so far:
Placed power mac G4 into target disk mode again in conjunction with macbook pro
I can see all the files on the power mac G4 (and have already copied them to the macbook pro) - so I don't think the hard drive is damaged
Disconnected all non-apple peripheral devices - only had a card installed in the back - but took that out - issue persisted (did not replace card in back)
Removed one non-apple RAM stick - issue persisted
Replaced non-apple RAM stick and removed apple RAM stick - issue persisted
Reset PRAM
Started computer in single-user mode
used fsck and tried to have system check/fix issue; no matter how many times I re-run the command to repair it never comes back with a message saying no issues found - instead it keeps returning with a message saying that the issue was repaired "system modified"
Started computer in verbose mode
startup seems to hang when this appears:
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: (ipc/send) invalid destination"
"LayState: cannot map display interlocks."
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: kCGErrorFailure: CGSNewConnection"
"Cannot connect to server"
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: kCGErrorInvalidConnection"
"Connection called with invalid connection"
Tried re-installing with system discs
The only discs I received with the power mac G4 when I purchased are orange and say "SSW version 8.6" on it" ("iMac Software Restore" and "iMac Software Install")
Computer does not respond when holding down "C" key at startup with either disc in the drive
When holding down "option" key at startup, the computer shows the bootable choices as ONLY the internal HD - not either of the CDs I mentioned above; I wonder if it no longer recognizes the original CDs because I updated to 10.2.8 from 10.2.1 before the issue?
I also have an install disc for OS X 10.4.7 - for a friend's iMac (G5)
When holding down "C" key at startup with the OS X 10.4.7 in the drive I get a kernel panic
When holding down "option" key at startup, the computer shows the bootable choices as the OS X 10.4.7 in the drive AND the internal HD
When I choose the OS X 10.4.7 in the drive I get a kernel panic
When I choose the internal HD the startup hangs at the gray screen I mentioned above
At this point, I don't know what else to do. I believe the computer is still good because I can see everything on it when I put it into target disk mode; it just refuses to make it through the startup/login process. I have read discussion threads that suggest re-installing the OS using another computer - but I don't know how to do that. I also wondered if there was a way to tell the computer to re-install the software using the original CDs - but from the command line (in single-user mode)?
Someone - PLEASE HELP!

Sorry, SU Single User Mode, OF Open Firmware as these 2 where mentioned before.
As a test, let's try disconnecting the HD & see if it booys to any mode without it attached.
It could be the User's files or login messed up, if you want to try something a little more desperate...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.
Except you could just use Target mode and move or rename that file.

64 bit OEL install hangs at installing dogtail in OVM 2.2

I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
VM-Server Specs
[root@vm-server ~]# uname -a
Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
[root@vm-server ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

2 new updates
1) I get the same errors when trying a command line install
2) I can successfully create fully virtualised VMs
So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

I have to replace a corrupted hard-drive so what do I need to do to uninstall the creative Suite CS^ so that I can re-install onto the neww ssd hard-drive that I am upgrading to???

I have to replace a corrupted hard-drive so what do I need to do to uninstall the creative Suite CS^ so that I can re-install onto the neww ssd hard-drive that I am upgrading to???

Simply deactivate the suite on the old drive and then install it on the new one.
Download CS6 products
Mylenium

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Solved! Calendar hang on sync: T5-Vista EASY!!!

After a whole day of searching, I discovered some wierd little code on my handheld calendar on December 31st, 1969.
On the handheld, all I did was delete it, as I input all date info with the stylus, and voila! No hang up.
The problem is that the palm desktop doesn't read anything before 1970, so, this was hanging me up.
How it got there, i'll never know. My laptod died and I had to do a re-install of Vista. Since it had all worked before, I knew it would.
So, go to your handheld calendar on dec 31 1969 and see if there's any crap written there.
I found it with dbfixit for free, and ripped out the entry myself.
This seems suspiciously like something put there by palm so that when I upgraded to vista I thought I needed a new handheld or software or something.
Post relates to: Tungsten T5

Thanks for the info.
There is actually an article regarding this error on kb.palm.com and how to fix the issue.
Click on the following link to the kb.palm.com webpage for the article regarding
How do I avoid the error 'The Palm Desktop does not support the event before 1970. The following events have been moved to 1970 ...'
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=35493
Post relates to: Palm i705

My iMac hangs when installing Yosemite.

My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

You can try using the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

CS3 Web Premium Suite compatible with Vista 64 bit?

Greeting folks. I realize this is not a Photoshop specific question, but does anyone use CS3 Web Premium Suite on Vista 64? If so, do you have any problems with any of the programs?
I'm contemplating upgrading from Vista 32 to Vista 64.
Thanks!

I just got the Adobe Master Collection CS3 to run on a Dell Workstation (quad core processor, 2GB RAM) with Vista 64 Business. Photoshop is deathly slow, to the point of being unusable. It takes up to 2 minutes just to load the programme. Clicking menu items or drop-down buttons produces no response for about 5 secs. I created a blank layer and tried to draw a simply brush stroke across it - again, a 5 sec delay before the stroke appeared. This makes it impossible to do any useful work. Other parts of the package are better (e.g. Dreamweaver, Illustrator) but Bridge is slow and I have a subjective impression that some of my none Adobe programme are now running more slowly. I did look at CPU and memory utilization - never got about 60% and was mostly around 10%.
When I run the Photoshop CS3 trial on an AMD duo core computer with only 1GB RAM (which is running XP Pro), I get a much snappier response. Makes me suspect a Vista issue.
Since others appear to be having much better success, I would be very interested in any tips, etc. which I might try.
Thanks.

PC Suite 7.1.30.9 hangs on instal with Vista Busin...

Similar Messages

Maybe you are looking for