Pc suite and ubuntu (linux)

Can anyone please tell me whether or not it is possible to get the pc suite to run using Ubuntu as a pose to Windows. If it is possible, please tell me how.

Hello,
I have the same problem like you and just came across this guy who seems to have the solution we all need... http://tareqalam.wordpress.com
good luck and long live ubuntu linus!

Similar Messages

Printers in RDP Windows 2012 and Ubuntu Linux

Computer 1. Windows Server 2012 Std with RDP Terminal Server
Computer 2. Ubuntu Linux 13.04 with RDP client Remmina and HP LaserJet 1020 Printer
Computers isn't located in one local network. When I connected to the Windows by RDP - I couldnt see any printers (e.g. HP LJ 1020). What should I do to make visible my printers when I connect thru Remmina to Windows 2012 Server? May be add some components
or roles? By the way, when I use Windows 7 to connect to Server 2012, I could see my printer like Remote Desktop Easy Print.
Windows Server 2012 и клиент на Ubuntu не находятся в одной локальной сети, поэтому подключить принтер из под терминальной сессии по локальной сети не получится. Нужно прокидывать принтер с Ubuntu в терминальную сессию через RDP. Так вот,
если я подключаюсь из под Windows 7, то принтер виден, Easy Print отрабатывает нормально, а если из под Ubuntu, то нет ни одного принтера. Как я понял, это особенность Windows 2012, то что они отключили там устаревшие компоненты, потому
что подключаюсь к Windows 2008R2 и там принтер из Ubuntu виден.

(SOLVED) Problem with printer redirection between Ubuntu Linux 12.04 and Windows 2012R2
Server - Windows 2012R2
Clients - Linux Ubuntu 12.04/14.04
RDP client - Remmina Remote Desktop Client (Stable release: 1.0.0).
It turned out that for some strange logic in the connection settings to the server in the RDP client - Remmina must specify sound "local".
Then Printer redirection works and print remotely without problems.
Special thanks to the user with the nickname "nechik_uk" from forum.oszone.net.

Weird Shimmering Display Under Arch and Ubuntu Linux on GT72-QE with GTX 980M

Just bought one of these laptops to run CUDA applications while on the road and all went smoothly until I installed Linux and then activated X (Gnome/Unity/XFCE). I first noticed this under Ubuntu 14.04 LTS, and the behavior is the same Ubuntu 14.10 LTS, 12.04 LTS, and even Arch Linux. In all cases, I used the 346.59 NVIDIA display driver either obtained through the Edgers PPA or manually installed.
What I'm seeing is The laptop display shimmering as if the horizontal sync is slightly off. External displays look fine.
I've updated the BIOS of the laptop to the 10R version from March and that had no effect.
Has anyone gotten this thing to work under Linux (any linux distro) with the discrete GPU active? If so, how?

Another guy here with the same problem. We have to create a platform of users. We have spent a lot of money on our equipment; we deserve some quality costumer support. The problem is clear and the solution seems straightforward. It would not take a lot to fix our situation, but we need to team up.
MSI GT72 Dominator GTX 970M with FREEDOS
Now Dual Booting Windows 8.1 and Ubuntu 15.04
Nouveau driver is stable, but does not do the job. Nvidia-346 makes the screen flicker. Switching to integrated graphics (through windows) ubuntu runs perfect. I have tried everything during the last weeks.
I am new to the forum and I have very little time for myself; somebody please take the lead. It wouldn't be the first time I see costumers getting together and achieving support.
By the way, hi, my name is Álvaro

EFI partition deleted after removal of dual boot of OSX10.8 and Ubuntu/Linux Mint - using rEFIt

so, i recently installed ubuntu to check out the advances in the linux world since i last looked into them 10+ years ago... very impressed, but when i tried to delete ubuntu and remove the various partitions (which i was able to do just fine using gparted) reFIT still displayed the **** linux logo from the install i deleted....
OSX still boots fine... a install of Linux Mint i have on another partition(s) still boots fine ... everything appears to work... but i want to know what the possible issues are so i can be prepared...
this is frustrating...
so i went in and looked around with the remaining partitions and noticed the EFI partition which hadn't shown before i mistakenly tried to install another distro over ubuntu after wiping the partition it was on...
so i erased the EFI partition hoping that this would remove the g-damned hold out linux boot logo in reFIT... it didn't... now i suppose i can go back in and create a new EFI partition through gparted but that stupid linux logo will still be there... and i'll have another problem of getting the proper information back onto the EFI partition, which i am unsure of how to do, or where to even dig up the proper information...
i want to edit my boot mbr or grub or whatever the eff apple comps use as a boot record so that (or i am using as a boot record since i'm using reFIT) to get rid of this **** logo, so i can install another distro of linux and probably windows without having the **** supernumerary logo...
i would rather not wipe the whole drive (aka the primary partition the recovery partition) and do a fresh new install of os x (mountain lion) because i have OSX set up just the way i want it for personal use and work use... all my various tools and so on...
i don't use time machine and can't do a "restore" from a previous back up...
some one please help me out here, what are my options? am i going to have to bite the bullet and do a wipe of the entire drive and all its partitions to get my MBP back to 'normal'???
PS - using a macbook pro late 2011, standard specs, 13"...

stqn wrote:
Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
You’re not saying what your problem is with partitionning, so it’s hard to help.
Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
Thanks again, Expi.
Last edited by Expi1 (2014-03-06 19:54:30)

J4680 WiFi printer and Ubuntu Linux?

Hi, I use Ubuntu Intrepid Ibex 8.10 and I was wondering how I go about setting up the WiFi for my new printer so I can print wirelessly?
This is the first WiFi printer that I have ever owned so this is all new to me for the most part..(well for the biggest part really)
The printer works just fine hard-wired to the computer and I can use it, but of course I bought this model to utilize the WiFi capabilites, and I had always heard that HP works well with Linux OS's so I thought this was the way to go of course. My problem now is that the WiFi set-up I assume is on the set-up disk and that works with Windows and Mac... I searched and searched for a Linux option all over the place and can't seem to find one anywhere...
I can see the printer itself when I click on network connections on my computer, I just can't actually get the computer and the printer to connect using WiFi... is there a workaround that someone knows of, or perhaps the techs at HP know of that I am missing here?

Hi,
Follow THIS document to connect the printer to your wireless network.
Once this is done, use the HPLIP program pre-installed with Ubuntu and search for the printer using the IP address. It should work that way.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Nokia Ovi Suite for Ubuntu - Linux

Hi! I am using Ubuntu. I would be happy if you would make the Nokia Ovi Suite, for this operating system also.
I also have an go pal (medion) gps.
Can I use Ovi maps with it ?

PC synchronising software is offered free of charge by all mobile phone manufacturers, so it's unlikely that any will develop Linux software - the OS may be growing, but it is still only a minority system.
There are independent solutions avbailable, here are just a couple of examples:
http://www.sugarsync.com/partners/sync_applications/sync_manager.html
http://www.linuxelectrons.com/news/mobile/11174/glide-sync-now-available-linux
To Huczek, I would say that if you created an account here to moan, then don't you think you wasted your effort? If you gave proper info about the problems you've had, the members here might be able to suggest what is going wrong for you.

VMM 2012 R2 Error (10637) Ubuntu Linux (64 bit)

When I try to change the properties of my VM to "Ubuntu Linux (64 bit)" I get the Error (10637) saying it's not supported...
VMM 2012 R2 and the Hyper-V server is Server 2012 R2 Datacenter.
I found a bunch of articles about RedHat and changing the OSFlags value in the table tbl_IL_OS however none of them say what those flags are / do or why set it to THAT value. I've also found a few other blogs about other OSes and different values. I'd rather
not guess what the correct value should be...
The actual VM is Ubuntu Server 13.10 but I'm not sure that matters?

Hello,
This issue relates to the way Operating Systems are flagged for Hypervisor support in the DB (the OSFlags as you mentioned). Ubuntu Linux 12.04 (32 bit) and Ubuntu Linux 12.04 (64 bit) are flagged as supported by Hyper-V. The Ubuntu Linux
() entries are flagged as supported by VMware but not Hyper-V. You could use the Other Linux or Ubuntu Linux 12.04 property.
-Kris
www.operatingquadrant.com

Suspending a w2100z running Ubuntu linux

I have several w2100z with the latest BIOS updates and Ubuntu linux (was required by a client). It used to be on an older BIOS version and older linux version, that there was a kernel message on boot that said suspend was not supported on this architecture.
But now I can actually get the machine to suspend and the power light blinks, but on wake, the machine reboots.
I was wondering if there was any documentation on how to try to suspend or hibernate this machine. It would be very useful. I haven't been able to find any information or clue searching and also searching about the K85AE motherboard. These are great machines, we have several of them, but this was always a sore point that we couldn't suspend them.
Thanks!

I just tried that and it's still saying the same thing. Any other suggestions?

Link longest file support, why Box (not Linux support) and Ubuntu (went down in July)?

Mozilla Thunderbid dont allow Dropbox to link longest file in emails, but Box and Yousendit dont support Linux Sync, then what can I do when Ubuntu go down in July ?
Thanks

OK, I will try to correct my bad English (sorry) in the question:
I am talking about "Filelink for Large Attachments" in the Thunderbird program.
Configuring Filelink according to this link: https://support.mozilla.org/en-US/kb/filelink-large-attachments
When I select the menu option: Edit | Preferences | Attachments and click on the Outgoing button, the Thunderbird program show me Ubuntu One as the "service provider", but Ubuntu One will be down on July 2014, then I try to add a new service provider clicking in the add button and Thunderbird show me the window "Set up Filelink" with a drop-down list with only 2 service providers: "Box" and "YouSendIt" but nobody of this service providers works with Linux for Sync. then this is (or are) my question: What can the Ubuntu (Linux) users can do to replace the Ubuntu One ? If Thunderbird and Mozilla is and strong partner of Ubuntu (Linux), why is there not any other service provider, like "DropBox" (for example) in your Drop-down list ?

My OS X 10.9 corrupted and i cleaned everything and installed ubuntu linux. I need clean install OSX again and i cant able to reach OS utility now. Please advise

My OS X 10.9 corrupted and i cleaned everything and installed ubuntu linux. I need clean install OSX again and i cant able to reach OS utility now. Please advise

You cannot use a Windows machine.
No idea if this will work because you have/had Ubuntu installed - hit Command + Option + R keys while restarting/booting up. Once in the Utilities, make sure the drive is formatted correctly and erase it, then reinstall the OS.

How to install Oracle Application Testing Suite on ubuntu 12.4 64 bits?

Hi Guys,
I am trying to install Oracle Application Testing Suite on ubuntu 12.4 64 bits, I have downloaded the application (Oracle Application Testing Suite 12.1.0.1.0 - Complete Install ) from http://www.oracle.com/technetwork/oem/app-test/index-084446.html, unzipped the zip file and then did sh setup.sh and I got this error:
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1703)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1003)
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1028)
     at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     at oracle.bali.ewt.olaf.OracleLookAndFeel.<clinit>(Unknown Source)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:466)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:965)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class oracle.bali.ewt.olaf.OracleLookAndFeel
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1023)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
I have downloaded 64 bits for Linux but it comes with jre/lib/i386 which to my understanding it is 32 bits jre.
any help please on how to install this application on ubuntu 12.4 64 bits.
Many thanks in advance.
Regards,

Hi
OATS is not supported on Ubuntu only on OEL 5.2 and 4u8 both 64 bit
Thanks and Regards
Alex

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Upgrading to Firefox 17 on ubuntu linux 10.04 caused my xmodmap remapped keys to not work in Firefox

After upgrading from Firefox 16 (16.0.2+build1-0ubuntu0.10.04.1) to Firefox 17 (17.0+build2-0ubuntu0.10.04.1) on 22-November-2012 I no longer can use an xmodmap remapped F key in Firefox. It still works in other gnome programs but pressing the new F key anywhere in Firefox 17 produces no action. I even had to use the gedit program in order to type all this before copying it into the Ask a Question form.
Here is my situation: I use Ubuntu Linux 10.04 LTS on a circa 2004 Sony Vaio notebook pc. I've been using linux on it dating back to Ubuntu 8.04. When I got the used pc the "F" key on the keyboard was broken off. I programmed the .xmodmaprc file in my home folder to initiate the "Keycode 133 = F" command on startup in order to remap the missing key to the unused Windows Logo key on the lower left of the keyboard. This has worked flawlessly for over four years. In all prior versions of Firefox going back to whatever version was included in Ubuntu 8.04 I have had no trouble using this key through all Firefox upgrades until now.
On the morning of 22-Nov-2012 the Update Manager notified me of an upgrade to the following packages as shown in the history log of Synaptic Package Manager:
Commit Log for Thu Nov 22 09:20:16 2012
Upgraded the following packages:
firefox (16.0.2+build1-0ubuntu0.10.04.1) to 17.0+build2-0ubuntu0.10.04.1
firefox-branding (16.0.2+build1-0ubuntu0.10.04.1) to 17.0+build2-0ubuntu0.10.04.1
firefox-gnome-support (16.0.2+build1-0ubuntu0.10.04.1) to 17.0+build2-0ubuntu0.10.04.1
firefox-locale-en (16.0.2+build1-0ubuntu0.10.04.1) to 17.0+build2-0ubuntu0.10.04.1
ubufox (2.1.1-0ubuntu0.10.04.1) to 2.6-0ubuntu0.10.04.1
xul-ext-ubufox (2.1.1-0ubuntu0.10.04.1) to 2.6-0ubuntu0.10.04.1
After performing the upgrade and restarting Firefox I noticed I was no longer able to use my remapped F key at all. I checked other programs and it worked OK so I know it's a Firefox 17 problem only. I tried reinstalling all the packages again with no results. I even went so far as to perform a Reset Firefox in Help-->Troubleshooting Information to try and get it working. All this ended up doing was removing all add-on extensions and changing some of my settings in Preferences but I'm not positive of any changes beyond the Location Bar setting in Privacy changing from Nothing to History and proxy setting going from No to Auto-Detect.
The only solution that has worked to fix this problem is uninstalling Firefox 17 and reinstalling Firefox 16 using a downloaded firefox_16.0.2+build1-0ubuntu0.10.04.1_i386.deb file from Ubuntu as Firefox 16 no longer shows up in the main repository since 22-November-2012. The only versions available for a Force Version in Synaptic are 3.6 and 17 now. After downgrading only the firefox package shows version 16.0.2, all other components I listed above stayed at version 17. I don't know if this will cause any other problems but so far nothing bad has happened.
After I submit this question I will be downgrading again to Firefox 16 until this problem can be solved.
Edit: noted the following Language Packs were disabled on restart after downgrading to Firefox 16 again:
English (GB) Language Pack 17.0
English (South Africa) Language Pack 17.0
If my memory is correct I only remember having an English (GB) Language Pack in all prior versions of Firefox. Firefox 17 was the first time I noticed a English (South Africa) Language Pack installed. It's possible the problem with xmodmap keys not functioning in Firefox 17 could be related to something in these two packs.

Ok I tested a bunch of different Firefoxes on my pos linux box.
'''''Worked with xmodmap:'''''
Vanilla 16.0.2,
Vanilla 16.0B6,
Ubuntu Firefox 16.0.2 (16.0.2+build1-0ubuntu0.10.04.1)
'''''Did Not Work with xmodmap:'''''
Vanilla 17.0.1,
Ubuntu Firefox 17.0.1 (17.0+build2-0ubuntu0.10.04.1)
I have an old Dell Dimension 2400 I plan to use as a replacement for the Sony Vaio when it pops. I've held out as long as possible because it lacks a pci or usb wifi and I really didn't want to run 50 feet of cat5 up a flight of stairs to it. [as i type this i think i remember where a linksys stick for it might be]. Yes I guess it's about time I just do that.
Don't laugh but the reason I held off adding a simple usb keyboard was just lack of space in my tiny bedroom. My setup is on two tray tables side-by-side. Sony Vaio is on left one, my lcd monitor and mouse are on the other. I barely have room to put a cup of coffee on the one with monitor and mouse let alone a full size usb keyboard lol.
Anyway thank you again for all your help.

What is the best client for ARD from ubuntu linux?

I attempt to connect to my mac mini running osx 10.7 from ubuntu linux using the default vncviewer application and the tightvnc client and I get to the login display but am unable to click on any of the users nor log in. I was successful from my windows7 laptop, but not from my windows xp HTPC--ultravnc gets to the login prompt, showed me the password field, but didn't allow me to change focus to that field, however, this isn't reproducable since I get a different behavior each time I try to remote in.

Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.

Installation of Developer Suite 10g in Linux

Hi,
I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
Any link for this would help me a lot.
I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
the forms and libraries in the same folder.
Regards,
Alok Dubey

First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
or any link which u felt that it is very useful, then Please let me know.
Have you checked if it is registered with DevSuite10g...???How to check this ..
"I have done some configuration.."
Which....????
I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
is in the attached library).
Regards,
Alok Dubey
Edited by: user583531 on Oct 23, 2008 4:06 PM

Pc suite and ubuntu (linux)

Similar Messages

Maybe you are looking for