Pc Suite cannot conect via USB

Hi hope somebody can help. I recently got a 6220 classic and installed all the software including pc suite and all was working fine. It stopped working yesterday now pc suite will not see the phone but it I can connect via mass storage mode to the pc. I have tried uninstalling and removing all the drivers with a registry cleaner but I still cannot get pc suite working. I am using Vista 64.
Thanks.

Finally worked out a solution, its due to the drivers getting corrupted.
If your running Vista you need to run the cmd prompt then type in sfc /scannow this will do a file check.Do this with the phone plugged into the pc in pc suite mode.
Leave it run it will take a while then reboot the pc with the phone still plugged in, it will reinstall the drivers.
That should be it. Ill try it later on version 7.

Similar Messages

  • I just upgraded my 3gs to OS5 but now my computer cannot coonect via usb. Computer says windows does not rconize it ... any help please

    I just upgraded my 3gs to OS5 but now my computer cannot coonect via usb. Computer says windows does not rconize it ... any help please

    I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
    Where is this iPhone from and what means did you use to unlock it?

  • N80 PC Suite not-connecting via USB

    Connected once via USB cable (CA-53), but won't connect again.
    N80
    PC Suite version 6.80.53.3
    Windows XP Pro version 2002
    Service Pack 2
    No anti-virus running or firewall upon installation.
    Phone data cable mode-"PC Suite"
    No USB connection "beep" on laptop.
    No error message, just the typical "working" icon.
    Did spend some time searching the discussion site, but couldn't find anything.
    Appreciate any suggestions or help out there in cyber...
    Thanks

    I do not recognise the PC Suite version ? If there is no bleep sound, if indicates that the physical connection does not happen, so pressing the connector firmly to its place might help, also changing the usb port in your pc

  • I cannot communicate via usb with my printer

    My intel imac running 10.5.8 stopped communicating with my CX7400 Epson printer today. All of the usb ports work fine with keyboard and iphone and camera but not the printer. I've tried reinstalling the printer software and spoke with an Epson tech who said I had an issue with my usb ports. The printer works fine when I plug it into other printers. Is there a reset process to restore full functionality of the ports or am I possibly facing a hardware issue?

    Try these suggestions.  Hopefully, one of them will work:
    http://support.apple.com/kb/HT1151 USB & FireWire Tips and Troubleshooting 
    Resetting your Mac's PRAM and NVRAM 
    Snow Leopard & Lion Printer solutions and suggestions. 
    Install the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers.
    Boot up from your Leopard Install DVD while holding down the "c" key. Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
    Once this process has been completed restart your computer.

  • IPod Cannot Connect Via USB 2.0, only 1.x Jack

    My wife has a Nano, 2nd generation that works great, so we bought our oldest daughter the 3rd generation last week, and it is nothing but trouble. If I dare to plug it into the PC on a USB 2.0 plug it shuts down the computer, immediately. BAM! Reboot and to the Nano. Happens with 2 separate HDs, both XP Pro, one iTunes 7.9 and the other 8.0. I don't think the iTunes matters because as soon as the jack is plugged in the machine shuts down. I can connect on a USB 1.x outlet, but if I go this route half of the music I have on an external HD will not copy onto the Nano, error says it can't read or write to the disk. Not all, and none of the purchased music has this problem. I transferred all of my CDs exactly the same, so there isn't any difference in the files. Now, the kicker, if I convert them to AAC they will write to the iPod. ???
    I have not seen any other people here try and connect on the old USB ports, as my PC has a few left, so if anyone else can try and see if their's acts the same. We got the nano at Costco, so we have 90 days to return it, and it looks like we will.

    OK, after wasting a day trying to figure this mess out I bought another USB 2.0 PCI card and stuck the Nano all by itself, and guess what, the PC doesn't need to reboot and synchs up. Apparently there was a conflict on the other row of 2.0 outlets, and now all is good in the Apple and Windows world. So if this can help anyone else I am posting how I resolved the issue, the iPod needs a non shared USB port, it's that special...

  • EliteDisplay s231d not connecting via USB

    I have an EliteDisplay S231d. I cannot connect via USB to my laptop. I can see the display in connected devices, but cannot switch to it and use the built in hub.
    I have downloaded the latest drivers and software for your site.
    I have Windows 8.1pro and am connecting via the out port of the screen using the included USB cable to a USB3.0 port.
    The serial number of my screen is 6CM4380VDW.
    Cheers,
    James

    The mini usb plug goes into the centre port at the bottom on the PlayBook. The RIM symbol must be up if you will damage the connection if inserted the wrong way. I put a white dot onto the correct side of the plug to make sure I get it right.
    You may have a firewall setting on your computer that keeps you from connecting to the PlayBook .
    If you go back to the top section of this forums home Page, there are several sticky notes. One deals with the BlackBerry Knowledge Base articles. Go there and enter some info into the search box. It will list some articles which may help you further.

  • Conecting to TK-Suite via USB / serial conection

    Hi we are trying to connect to a AGFEO phone system using TK-Suite software the connection on the AGFO is a PC style serial port I have tried a serial to USB adaptor (from CEFC) but my mac book cannot see any port activity.
    Thanks Gary

    What Agfeo Model is this? You can connect some older Models directly via USB (AS3X). Others work fine via Prolific chipset based USB connectors. Make sure Yo have the right settings in Network for your new USB-Serial Controller (in advanced - Manufacturer: NullModem 9600bps - no compression, ignore dialtone).
    In TK-Suite's (current 3.3.2.0) TK-Set make sure to choose proper PASSIVE serial connection at 9600 no Parity 8bit 1stopbit.
    TK-Server and Client works fine for me. Unfortunately no Universal Binary yet, plus remember to quit the App manually or your Mac will not shutdown.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • When i connect my ipad to my computer via usb, the latest version of itunes states that the mobile version cannot be started because of an unknown error

    i have just downloaded and installed the latest version of itunes.  Now when i connect my ipad to my computer via USB, itunes states that the apple mobile device service cannot be started because of an unknown error (1058).  The connection worked fine with the previous version of itunes.

    so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
    Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.)

  • Nokia PC Suite not detecting my N79 via USB.

    Hello!
    Got my N79 yesterday and having a bit of a problem with getting the Nokia PC Suite finding it. The program tells me to plug in the phone and when i do this nothing happens. I'm connecting via USB with a CA-101 cable.
    Have tried reinstalling the Pc Suite a couple of time and same with the USB connectivity drivers.
    I'm using XP Pro x64 SP2 on my PC and the Nokie PC Suite version is 7.1.26.0.
    Any solutions?
    Regards
    Erik

    Is the settings in your N79 for the data cable set to "PC Suite Mode" or "Always Ask on Connection"?
    Did you try a different PC?
    Is the phone getting detected as a removable drive when you connect it in Mass storage mode?
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • Problem using PC Suite via USB

    I have a problem accessing my Nokia phone (E50) with PC Suite via USB, but since I pruchased it earlier on though, it never had this problem. My phone's connection settings via USB has been modified to let the phone be connected thru "PC Suite", and I have the USB wire that came with the phone. I had access to the contents of my phone just fine, until this week.
    The problem is that the phone does connect, but my PC doesn't read any phone from the connection. I tried connecting the phone with four different USB sockets available, but no result. I tried reconnecting the phone with the USB wire, but it was futile.
    Honestly, I do not know if the problem is from my phone or from the computer. My cousin, after all, came over for a slumber party during the weekend, and he visited websites that might have badware. [My computer restarts when I choose "Shut Down", it's working slowly at times, and it restarts if I bother downloading anything.] If anyone has an idea how I could resolve this connectivity problem, I'd most appreciate it.

    Where this wonderfull place is located? I could not find out yet!
    I should say that Nokia is to think more when making manuals on E71 et al/
    Thanks ib advance

  • Problem connecting C3-01 to OVI Suite via USB

    I can't seem to successfully connect my C3-01 to the OVI Suite via USB.
    The PC (running Vista) sees the device, but OVI Suite keeps complaining that I need to change the USB mode on the device to OVI Suite, although that's how I set it.  OVI Suite also doesn't show the device under the update section.  Does work when using Bluetooth though.
    Any ideas what may be the issue with the USB connection?
    Thanks!

    I just bought Nokia C3-01 over the weekend and I have the newest version of OVI suit and I connect mobile and pc with USB cable click sync and nothing happens my mobile is still without pics and videos and music I'm trying to uplod on the phone?????
    Sometimes it writes some contentn was not synced properly error code:80043bee and other times it says sync ok but nothing happens...no pics or video were transfered??
    What's wrong??

  • Epson xp-410 cannot be located after upgrade, connected via usb

    after upgrade to Yosemite, cannot print, looking deeper, message says printer cannot be located.  It is connected via USB.  I am very confused.

    Hi,
    First
    Please Download and run the Printer doctor tool to find and fix your problem
    http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-135113-1/HPPSdr.exe
    If you still have the issue then,
    The detailed description of troubleshooting steps has been given in below link. Click on the windows XP link and follow the steps.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02266743&tmp_task=solveCategory&cc=us&dlc=en&lc​...
    Happy Printing
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Cannot see the USB printer attached to my TC (Mac Air, Maverick, Air - TC via ethernet)

    I cannot see the USB printer I attached to my Time Capsule's USB port.  I am using a Mac Air, with Maverick OS, and connecting between my Mac and the TC via an ethernet link.  Suggestions?

    Not sure what you mean by "see" the USB printer.
    If you simply plugged the printer in to the Time Capsule, it will not be "seen" by anything.
    You won't "see" the printer until you use System Preferences > Print & Scan on both of your Macs to "Add" the printer. Did you do this for both Macs?

  • New Q10 cannot connect to Link via USB

    Hi everyone, I've run into a problem with my new Blackberry Q10 (text messages getting stuck in the notification window) and, seeing as I've had it less than a month, my retailer has ordered me another Q10 and is going to send the old one back.
    Now, my understanding is that if I backup my phone to my computer it will save all of the changes I've made regarding ring tones, notifications and other settings so when I get the new one I can just plug it in, say go and have the new phone essentially set up exactly the same as the old one.
    Problem is that Blackberry Link has been unable to connect to my phone via usb. I am using Windows 7, have tried a few different usb ports (one of which I use to configure/update my ipad and ipod) but nothing has helped. There is no error message, the status indicator on the phone just stays on "not connected". The computer makes the "device connected" sound whenever I plug the phone in and the phone is able to charge and recognize that it is connected to a computer but for some reason Link still does not recognize it. It is, however, able to connect through wifi...
    Any ideas?
    Thanks,

    Win 7, great OS, Phone same version as me and mine is 100% working, Link recent, should all be good. You might have to Security Wipe to resolve this but lets try to find the issue as BB Link is not working so you cannot Reload the OS and SW will delete all data on the phone. Alittle different steps then the other ones: Uninstall BB Link, using Windows Search (Advanced and searching Everywhere) find and delete all    blackberry   files found. Go to Device Manager, find all the Blackberry and Rim drivers and uninstall them, do this with your phone disconnected, so to see all of them in Device Manaer click View on the Menu then click Show hidden devices then expand the + sign. I do not have Win 7 but the drivers are usually found in these 6 places: 1 Blackberry2 Disk drives3 DVD/CD4 Modems (Standard Modem only)5 Network Adapters6 Ports Power OFF your computer (not a restart)  Power ON and wait 5 min. plugin your phone and wait another 5 minutes before Installing BB Link Before you do all this please tell me your Anti-Virus program (full name and version #) and if you use a 3rd party Firewall I will check to see if they are compatible with your system or you can check here: http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/Home Enter just the  anti-virus name in the Search, find your version and click it, next page change the drop down menu to Win7  

Maybe you are looking for