PC Suite conflicting with another programme, pausi...

I have a HP M7437UK pc which is running Meida Centre XP.
Everything works fine apart from PC Suite. I have to keep uninstalling it after i have used it as it 'freezes' my mouse and all programes for a split second every minute.
The freezing thing is simlar to when you are opeing a programe up or when you move the mouse and it has a delayed reaction.
It took me a while to work out it was pc suite casuing this prob as the pausing is most noticable when playing music (It sounds like a cd is skipping when it does this freezing thing. When pc suite is installed it effects all other standard programms i use, even when the pc is idle.
Does anybone have a clues as to what programme/driver might be casuing this?
The only additional progs i have really added since getting my pc are adobe, flight sim and virtual earth.
Hope to hear form somebody!
Thanks

Thanks for your reply.
Its stange as my brother has a dell pc running with mce on it and it works perfectly well.
I dont know what could be casuing it?

Similar Messages

  • When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!

    when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!
    This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

    HyperNova Software,
    Thank you so much.  Because I am very computer illiterate, could you help me on how to get started?  I don't have the slightest on where to get started, the steps to follow, etc.
    Can't thank you enough for your help!

  • Cannot instal xorg files - Conflict with another program.

    I have a new install and set up my wireless, got pacman working good but there are a couple things that are not working. 1-cannot install powerpill, it just does not find it when i try to download it. 2 when I try to download xorg files it says there is a conflict with another program (not near my comp right now so i dont have the name of the program, i will post it later). I am more worried about getting xorg set up than powerpill. does anyone have any ideas? i am set up for fastest mirror and ran the pacman -Syu to update everything yesterday...

    I am trying to install everything under xorg that comes up when you type pacman -S xorg. the error itself says that it conflicts with another program when i try to download it. it says do i want to remove program "x" but does both options still will not download. I will get the full info tonight.

  • Access Yahoo mail account with another programme p...

    Hello,I'm trying to set up my email service with another programme and yet when I follow these instructions I cannot find what it's on about! I am trying to enable POP in Yahoo Mail however I am stuck after number 2 from the instructions below in that I cannot find Yahoo Account. Does anyone have any ideas please   
    Sign in to Yahoo Mail.
    Mouse over the Settings menu icon |select Settings.
    - The "Settings" window opens.
    At the right of "Yahoo Account," click Edit.
    - A window with additional account settings opens.
    To the right of "Access your Yahoo Mail elsewhere," select POP.
    Select your POP option from the drop-down menu:

    You need to sign in to BT Yahoo! unless you've been migrated to the new BT Mail. Either way you should be able to get to the correct account by clicking Email at top right on the BT home page.
    You can click the white star next to this message if you think it was helpful.

  • How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

    Robo 8 HTML:
    Can somebody assist me in understanding how to rename a topic ID in my map.h file?
    An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
    #define Open    59
    #define Save    60
    #define Print   63
    #define Cut     72
    #define Copy    73
    #define Paste   74
    #define Clear   75
    #define Status  81
    #define Substructure  139
    Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
    Any assistance with this question is greatly appreciated.
    Thanks,
    robert

    Hi,
    Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
    If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
    If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

  • PC Suite conflict with software

    I have recently bought and installed a Nokia 6680 and PC Suite BUT SINCE INSTALLING this my CD BURNING SOFTWARE HAS STOPPED WORKING. I am using Pinnacle CD creator and it states it has a conflict with new software installation ie Nokia PC Suite. Also my Mum had the pc set up with Windows Media Player as the default player but it now defaults to a realplayer. I am new to all this can anyone help!

    have you uninstalled PC Suite and can confirm that then everything again works OK ?
    This fillowing seems to be a "magic trick to all problems", so you can run this command also, it does not hurt I guess:
    This worked for me: go to Start/Run and enter
    Regsvr32.exe %Windir%\System32\Ole32.dll
    Click OK and the "phone browser" works again!

  • My application conflicts with another Measurement Studio based application.

    Hi,
    Our instrument is made by a third party, and they appear to use Measurement Studio in the development of their control software.
    We use Measurement Studio when developing our test software. When we install our test application on a production machine (no programming environment installed), we sometimes get a message about only being able to use controls for 5 minutes in an "evaluation-only" mode.
    It is clear that there are some library file revision conflicts, e.g.: in cwui.ocx and presumably others. The third party is using a slightly different revision of these files to ourselves. What is the the best way to consistently resolve these conflicts?
    Thanks,
    Richard Brockie

    Hi Richard Brockie,
    You are correct in assuming there is a conflict with cwui.ocx.
    If the target computer does not have Measurement Studio, it will not contain the .ocx and .dll files required for the executable to run. Microsoft Visual Studio .NET has a Setup and Deployment Projects type that allows you to create a MSI installer that finds all of the dependencies for the project and then installs them on the target machine when the setup is executed.
    I've included the following link that demonstrates the process of creating an installer for a Windows application, using .NET or Active X controls.
    http://digital.ni.com/public.nsf/websearch/ED87C183E056CAC386256DF1004E54C6?OpenDocument
    Please respond if you have further questions or if this does not resolve your issue,
    Chad AE
    NI

  • Audio to midi error - check conflict with external device - apogee rosetta

    hey there
    i have a problem and any help is much appreciated..
    basically i am running a quad xeon dual 2.66 machine under 10.4.10 and using logic 7.2. 1 gig ram.
    i am using a apogee rosetta 800 with the option x firewire card for my audio interface.
    whenever i set a track up to record and 'play' logic i get a message saying,
    'unable to sync audio to midi check conflict with external device' and then it says something like sample rate 43021 recognised.. something close to 44100 but not quite..
    so i think my problem is a clocking/sync one maybe? i have tried everything i could think of, including fixes suggested on the forums here, but nothing so far seems to help e.g making sure autosync in on the transport is unchecked, checking audio MIDI setup.
    worryingly with the few problems similar to this on the forums there doesn't seem to be a way to fix it!!
    anybody who could help would be a lifesaver.. this is destroying my workflow!! emailed apogee and im waiting for a reply.
    thank you very much
    richie

    Hi,
    Ok, then there can be a few more possibilities,
    Try this: unplug your Rosetta, and any other FireWire devices you might have. Basicallly you want to start Logic with the internal audio.
    If this works ok, then it is not an issue with the Mac's hardware, and is an issue with a FW device.
    Then, quit Logic, and plug in the Rosetta by itself. Boot Logic, and select it as the audio interface. Try playing stuff back. does it work? If yes, then the issue is with another FW device. If there is a issue, then there might be a corrupt driver, a bad FW cable, etc. Keep trying one by one to go through re-installing the drivers, and also try changing the FW cable. If this still does not solve it, there might be an issue with the Mac OS 10.4.10. You might need to install Pro App support 4.0. Also, there was a fix available from Apple not so long ago specifically for FW audio devices. Please do a search in Apple's suport site for "FireWire audio device" and see if you find the patch.
    If the Rosetta works when it is the only FW device hooked up to the Mac, then you have a conflict with another device, like a FW hard drive, etc... check each one until you find the culprit.
    Cheers

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • How do I add another programme to a mac with MS office already installed?

    How do I add another programme to a mac with MS office already installed?

    Just run the DMG file and it will give you the option to install it.

  • Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

    Hello, I am filtering by date
    DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
    doing like below gives me an error
    ADODB.Command error '800a0bb9'
    Arguments are of the wrong type, are out of acceptable range,
    or are in
    conflict with one another.
    /aa.asp, line 19
    line 19 is
    Recordset1_cmd.Parameters.Append
    Recordset1_cmd.CreateParameter("param1",
    135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
    any one have any idea as to why
    grateful for any help
    thanks
    k
    <%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
    <!--#include file="Connections/connpeepeek.asp" -->
    <%
    Dim Recordset1__MMColParam
    Recordset1__MMColParam =
    "DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
    If (Request("MM_EmptyValue") <> "") Then
    Recordset1__MMColParam = Request("MM_EmptyValue")
    End If
    %>
    <%
    Dim Recordset1
    Dim Recordset1_cmd
    Dim Recordset1_numRows
    Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
    Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
    Recordset1_cmd.CommandText = "SELECT usr_image1,
    dateimage_usr FROM
    diddle.ps_usr_image WHERE dateimage_usr = ?"
    Recordset1_cmd.Prepared = true
    Recordset1_cmd.Parameters.Append
    Recordset1_cmd.CreateParameter("param1",
    135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
    Set Recordset1 = Recordset1_cmd.Execute
    Recordset1_numRows = 0
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN"
    http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=utf-8">
    <title>Untitled Document</title>
    </head>
    <body>
    </body>
    </html>
    <%
    Recordset1.Close()
    Set Recordset1 = Nothing
    %>

    Ben,
    If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
    strSQLAcct = "SELECT Account FROM dbo.TG_Account"
    Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

  • Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

    is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

    Hi,
    There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
    user’s MySite.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Khmer Unicode 2.0 font conflict with Adobe suite

    I just downloaded Khmer Unicode 2.0.  After I did, the Microsoft Word doc that supplied a Khmer translation read correctly.  When I tried to copy and paste the Khmer into any Adobe apps (I tried 3, so have concluded it will be true of all) the font moved the letters around, deleted vowels, and generally messed up the phrases.  It did it the same way every time I tried new things.
    I even tried copying the font into the Adobe FONT folder, and that didn't make any difference.  What could be creating this problem... I need to resolve it right away since I am trying to finish a project by the end of today.
    I have 3 files to send someone, but don't see an option to attach them here
    I am using Windows XP and Adobe Suite CS3
    I just found this:
    you should already know the answer to this. btw it's not just khmer, it's any
    unicode encoded text.
    first the usual suspects: what db driver? 100% sure you're using the correct dsn?
    then this caught my eye: SET khmerReadWriteTest ='#form.text#'
    uh either use cfqueryparam (good practice besides you turned on unicode in the
    dsn anyway) or unicode hinting.:
    SET khmerReadWriteTest=N'#form.text#'
    But I have no idea where you do any of this.... Help please!

    Is there a Windows machine on the network? It might be a conflict with non-Unicode symbols fonts used by them.

  • Conflict exists with another time entry

    Hi, a user tries to submit a vacation leave for April 1 2009 in ESS and gets the following error:
    Conflict exists with another time entry from 16.12.2008 to 19.12.2008
    I checked her infotype 2001 records and the there are no time entry for April 1 2009
    How come the error message is saying the conflict is with a date in 2008 when she is entering a vacation request for 2009.
    Any suggestions how to resolve this?
    Thanks.

    there is an absence from 12/19/2008 to 12/26/2008 but it was processed successfully so there shouldn't be any conflict there but the system seems to be thinking there is.
    Another thing - the absence for 12/19 to 12/26 is not a vacation but sickness with certificate.  The user is trying to do a vacation time for April 14 and system is saying it conflicts with 12/16 to 12/19 dates (which there weren't any dates in infotype 2001).

  • The name of this class conflicts with the name of another class

    I had a problem when compiling my flash movie. I had made an
    instance from a class, but the output kept saying:
    "The name of this class, XXX, conflicts with the name of
    another class that was loaded XXX."
    I read a lot of developers have the same problems, when i
    looked it up:
    Google
    link on : "conflicts with the name of antother class that was
    loaded"
    Apparently it is some kind of bug caused by different times,
    between local/network machines and servers.
    Also when there is a time difference involved between 2
    computers, then this problem also occurs.
    Can't macromedia fix this bug? .....Because as a developer i
    don't want to adjust my time, everytime i want to test my flash
    movies or have to compile my movie 2 times. The other developers
    are getting tired of it also.
    We need to get this bug trough to macromedia or adobe!
    It needs to be fixed!

    Can anyone help?

Maybe you are looking for