PC Suite converts flac music files on the fly to A...

PC Suite 6.86
Nokia 5320
Windows XP
I convert my music to AAC 128 with the Nokia PC Suite App. I drop files by hand onto the application and it converts it correctly.
Now I a have a lot of files encoded in flac format. I KNOW ALREADY that the 5320 does not play flac files.
(and I also know that there is the free app oggplay that plays flac, but because oggplay cannot use the hardware buttons of the Nokia 5320 this is not a solution for me).
But is it possible to have flac files converted on the fly when I drop them onto PC Suite. At the moment it doesn't seem to work so I guess Nokia Suite cannot read flac files to convert them to AAC?
Any way to change this?

Just to clarify:
I read the topics about flac on this board and I DO NOT want to add to the flac support questions. I do not need flac files to play on tthe 5320.
All I wanna do is convert the flac files on the fly with Nokia Suite (to AAC or eAAC+ or whatever is supported) and at the moment it seems its not working. So I would like a confirmation if it is not supported for conversion or if I am doing something wrong or maybe my PC Suite version is not the right one.
Thanks again.

Similar Messages

I have legally purchased and downloaded FLAC music files online, but iTunes will not recognise them. What can I do?

I have legally purchased and downloaded FLAC music files online, but iTunes will not recognise them. I'm working on a PC. Can anybody help, please?

Hi anniepat,
FLAC files do not run on iTunes. See this article for how to convert your FLAC files to iTunes compatible format:
http://www.bigasoft.com/articles/how-to-import-flac-to-itunes.html
Cheers,
GB

Why can't I convert a music file to a podcast?

Just updated to iTunes 11. When I try to convert a music file into a podcast (it is a 3 hour file) it changes it right back to music? Is this a bug and is there another way to do it?
Thanks!

For the time being it worked making it an audiobook, though now I can't use the new Podcast app for it....lame!

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?
The music I want to move was in iTunes but is now just files. I had to reinstall a new iTunes and lost all my old music.
Thank you!

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

C5-03; how to view music files in the memory card ...

Is it possible to view the files in the memory card (using the File Manager) folder-wise? I have some music files in the memory card; in a folder named 'Music'. When I go to Menu - Applications- Office- File mgr - E:Memory car-Music , I see the files in different collections corresponding to the artist/ genre names. I don't see the folders I had created. The artist/ genre (meta) data is not accurate and so the listing based on that is not useful.
This is related to the problem with Palylists I had posted earlier.

go to music player select options and refresh player this will pick up all the music
you will get a message on screen for example 40 songs added the go to music player select all songs
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I am trying to convert a pdf file from the Government Website.

I am trying to convert a pdf file from the government site, it is a divorce petition item d008-eng.docx. Whenever I do the transcript is all over the place. Any suggestions?
I have only bought the software to do this one thing and it failed.

If you use Reader XI you should be able to save it. You should also be able to save the form with Acrobat. However, the form name you gave is a docx file, not a PDF. So it is not clear what you are asking. If it were a PDF form as I would have expected, your questions would have made more sense.
Did you buy Acrobat? If so, are you trying to convert to docx or what. I really do not understand your question. I did find an 8 page PDF of the form (assume it is the same). If you have Acrobat, just start filling it out and save at any stage. I do not see any need to convert it to docx. There are no restrictions on the form for saving or such, so I do not see why you say you can not save your input. If you bought Reader, you got ripped off. If you bought Acrobat there should be no issues with saving. If you use Reader XI there should also be no issues with saving the PDF. So, I do not see the point of your question, sorry.

I've backed up my macbook onto a LACIE hard drive but when I open my music files there's nothing on the hard drive. I've already deleted all my music files from the macbook. Help?

I've backed up my macbook onto a LaCie hard drive but when I open my music file on the external hard drive looks like is empty?

1. Yes, unless a problem occurs.
2. No, you’re not.
3. Yes.
(111564)

How can I delete music files of the IPhone?

how can i delete music files of the IPhone. I was already in ITunes, but this option was grey!

Thx Allan, it was successful!!!!

I have music files by the same artist but they are listed in itunes in more than one album hod can i add then to just one album pf that artist

I have music files by the same artist but they are listed in Itunes in more than one album hod can i add then to just one album of that artist I am using windows 8.1 .

iTunes will group songs into an album when:
All songs have the same value for the Album and Artist field, or
All songs have the same value for the Album and Album Artist field
All songs have the same value for the Albumfield and the Part of a Compilation flag is checked.
If you want to group all the songs by one artist into a single "album" you can do so by following one of these rules. However, it may be more useful to create Playlists to group music like this and retain the original release information. One Smart Playlist for each artist you're interested in would meet this need without over-writing information about the source albums.

Connect the music file with the artwork file post-computer-crash?

I want to retrieve artwork after restoring my computer?
So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
is there a data file and will they automatically sync to the artwork if they are in different locations?
Thank you for your help, Allen

pfanzier wrote:
… is there any reason i shouldn't delete the artwork folder?
All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
pfanzier wrote:
itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

I'm I'm using a video editing program that will only accept music in MP3 file form, so it won't let me use any of my itunes music. Is there a way to convert itunes music files to MP3 files?

I'm using a video editing program that will only accept music in MP3 file form, so it won't let me use any of my itunes music.
Is there a way to convert itunes music files to MP3 files?

There is HangTimes' never fail method:
http://www.bulletsandbones.com/GB/FAQPages/NeverFail.html

I converted a pdf file to the web but it moved me the picture to the left of the screen

Hello Friends
I converted a pdf file to the web but it moved me the picture to the left of the screen
Why does this happen?
have a nice day!

thanksssssssssssssssssssssssssssssssss@@!!!!
You were helpful to me
And another small question
In my web(http://josephones.com/)
At bottom left corner
You can see four text fields
How can I make this contact form?

Reading trace file on the fly.

I came across one cool trick mentioned by Tanel Poder, but it doesn't seem to work for me. Could anyone please help in reading trace file on the fly.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL> !uname -a
Linux abc 2.6.16.60-0.34-smp #1 SMP Fri Jan 16 14:59:01 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux
SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
2             (select spid||case when traceid is not null then '_'||traceid else null end
                 from v$process where addr = (select paddr from v$session
3    4                                               where sid = (select sid from v$mystat
5                                                          where rownum = 1
6                                                     )
7                                          )
8             ) || '.trc' tracefile
9      from v$parameter where name = 'user_dump_dest'
10     /
TRACEFILE
/n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc
SQL> host mknod /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc p
SQL> set define off
SQL> host grep "WAIT" /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc &
SQL> set define on
SQL> alter session set events '10046 trace name context forever, level 8';
Session altered.
SQL> select * from dual;
D
X
SQL>
SQL> select * from dual;
D
X
{code}
I dont get any WAIT printed into the pipe file created before tracing.
Am i doing something wrong here ?
Edited by: Yasu on Nov 12, 2012 10:14 AM

I tried manual method and yes i am able to find WAIT lines in trace file.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
           (select spid||case when traceid is not null then '_'||traceid else null end
2    3                   from v$process where addr = (select paddr from v$session
4                                               where sid = (select sid from v$mystat
5                                                          where rownum = 1
6                                                     )
7                                          )
8             ) || '.trc' tracefile
9      from v$parameter where name = 'user_dump_dest'
10     /
TRACEFILE
/n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
SQL> alter session set events '10046 trace name context forever, level 8';
Session altered.
SQL> select * from dual;
D
X
SQL> alter session set events '10046 trace name context off';
Session altered.
SQL> !ls -lrt /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
-rw-r----- 1 oracle oinstall 2738 2012-11-12 01:13 /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
SQL> !grep "WAIT" /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704368368424
WAIT #1: nam='SQL*Net message from client' ela= 4057810 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428142
WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428492
WAIT #1: nam='SQL*Net message from client' ela= 195 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428892
WAIT #1: nam='SQL*Net message to client' ela= 3 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428939
WAIT #1: nam='SQL*Net message from client' ela= 46319788 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704418748740Not sure why using mknod fails in my case.
Edited by: Yasu on Nov 12, 2012 12:48 PM

Can we create a XDP file on the fly

Hi All,
I am new to Live Cycle.
I want to know if we can create an XDP file on the fly and immediately using this XDP file can form server create a PDF?
Need this info urgently..
Thanks in advance.
Regards
Vinay

There are several ways to do this. The third chapter in the
cookbook is a good place to start.
All things in ActionScript are based on objects. Constructing
them with the data needed for the ui information you will need and
then binding that data to your dashboard objects is basically what
you are going to be doing.
For me it makes the most sence to have an idea of what
different types of objects you will be creating and create some
extended components for those objects. Then when you recieve your
data, binary or xml, you can digest the configuration settings from
the layout and populate the constructor for each of your
components.
It sounds like you need to organize your layout structure in
a heirarchy and from that you can walk each branch and create each
set of things as you parse your data.
Without a bit more information as to what you are
specifically doing that is about as far as I can go minus adding in
some code along some line that I think might work.
Hope that helps some.
-D

PC Suite converts flac music files on the fly to A...

Similar Messages

Maybe you are looking for