PC Suite does not handle properly messages longer ...

Phone: Nokia 6610i connected with infrared
System Information from PC Suite:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: Italiano
Language for non-Unicode programs: Italiano
Locale: Italiano
Input language: Italiano
Nokia PC Suite:
Version 6.82.22.0
Language: English
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Version 6.43.9.0
I have some messages longer than 160 characters and it seems that they are not handled properly:
- The backup application stops copying messages when it finds the first long message.
- When I browse the messages in Explorer (launched by clicking "Messages" in PC Suite) only sms up to 160 characters are shown. There are also some blank entries in place of long messages.
I've noticed the same problem in the Italian version, I removed it and installed the English version before reporting the issue.
Thanks

Hi read my issue from a few days back from dave100. It seems we are having the same issue. I wroth to support but no one has got back to me. I bet they are clueless and have no idea why this is happening....Check out my attachment. Is yours the same?
cheers.
Dave
Attachments:
empty texts.txt ‏11 KB

Similar Messages

Nokia Suite does not see saved messages

Hi! I transferred a part of the messages in my Nokia 6303 to phone' s folder Saved Messages, and since then the troubles began.
1. I can not move any sms out of the Saved Messages folder, for example, it is not possible to send them back to Inbox folder or any place else.
2. Nokia Suite does not see some of those saved messages- they appear as empty boxes there, despite I can read them on my phone.
Can I restore all messages downloaded to Nokia Suite, making them readable?
How can I move the sms from Saved Messages folder on my phone?
Can I tranfer sms from Saved Messages folder of my Nokia 6303 to another phone (even not Nokia)?

Hi Nicksimper,
Welcome to the Nokia Discussion boards!
First could you do a soft reset on your phone by entering *#7780# into your phone’s keypad. The default password when prompted is 12345. This reset will NOT erase any data, but revert settings back to original. Also, ensure you have the latest firmware by visiting this page and the latest version of PC Suite by following this link here.
The following link provides extensive information for managing your messages on Nokia devices using Nokia PC suite.
In order for you to move messages out of the “Saved messages” folder, you will have to create a new folder in the same directory, but you will not able to move messages back into your inbox. To move your saved messages to another non-Nokia device, you can forward the messages via SMS.
Hope this helps and let us know how it works out.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Ovi suite does not clear flashing message indicato...

When there has been incoming SMS to E55 (034.001) and message was read via OviSuite 3.0.0.290 flashing message indicator remains blinking in the phone even display information concerning arrived SMS message was cleared on phone display.
Does anyone know if this can be configured somehow or is this a bug in Ovisuite or E55?

Hi,
It is Nokia E55 issue.

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.

this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

I am working with multiple PDF files in Acrobat Pro XI. Sometimes when I move a page from one PDF to another it does not view properly. It was fine in the source PDF, but not when moved to the desired PDF. I also see a message momentarily across the bottom of my screen that says "consolidating fonts". What must I do to fix this?

Lloyd ,
Follow these steps for Acrobat 11 .
Launch Acrobat>Tools>Print Production>Acrobat Distiller
Now in Acrobat Distiller follow these.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.
See if this helps.
Regards
Sukrit Dhingra

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

Windows Security Suite does not recognize Verizon Internet Security Suite

Windows Secuity Suite does not recognize that the Verizon Internet Security suite on one of my PC's is running and keeps popping up aWindows Security Alert. The Firewall is enabled within Verizon Internet Security suite.
My other PC's don't have this issue.
All PC's are running Windows Vista Home Premium.
Any ideas?
Cheers,
Mark

well that error message is saying that Windows security center no longer supports the way that the VISS is reporting. Which means that even though VISS is working and it is even reporting its status to WSC. WSC doesnt recognize it anymore. Likely one of the windows updates made the change. I can see the fight comming now. Verizon is going to say. Its working and if the other program doesnt support it, too bad. And windows is going to say the same thing in reverse. My guess would be that it will probably stay that way unless Verizon or Microsoft get enough complaints to make a change in the recognition system.
But the good news is that VISS is running and protecting you. The WSC just doesnt "speak the same language" anymore and cant understand the message from VISS saying "I'm up and running"
====================================================================================
Error exists between keyboard and chair.

Ovi Suite/PC Suite does not recognize the connecte...

Error message: "Ovi Suite/PC Suite does not recognize the connected phone.Ovi Suite/Pc Suite cannot read the required information from the phone.Check that the connected phone is supported by Ovi Suite/PC Suite".
You can try this which can solve your problem.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

@ Omarbooyaka,
Welcome to the forum! You should use Nokia Suite to update your device to Belle. If still the same, please go to control panel > printer and devices > right click the phone icon > remove the device. Then try to connet again. Also try all the steps provided by magovoru. Could you also report the issue here if connection still does not work.
Hope this helps!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Excel process does not end properly

Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.

Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

PC Suite does not detect my bluetooth stack of blu...

Hi can somebody help me?
I have done all advises and procedures regarding uninstalling and installing in the right order but no result.
= = = = = =
My info is:
Bluetoothstack : Bluesoleil 2.3.0.0 release 060728 stackversion: 05.04.11.20060622
PC Connectivity Solution:
Version 9.23.3.0
Nokia Connectivity Cable Driver:
Version 7.1.17.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: Nederlands
Language for non-Unicode programs: Nederlands
Detected Internet browsers:
- Microsoft Internet Explorer 8.0 (Default browser)
- Mozilla Firefox 3.5
Detected Bluetooth stacks:
= = = = =
My problem is that no bluetooth stacks are detected by PC Suite.
With bluesoleil I can make connection with my Phone 2720 Fold. And all works fine
But PC Suite does not see the bluetooth connection
How should solve this?
Many thanks in advance.
Regards,
Adam
Message Edited by AdamX01 on 06-Nov-2009 02:20 PM

I never got any Bluesoleil stack to ever work with any version of PC Suite. However, as of Windows XP SP2, the Microsoft Bluetooth protocol stack appears to detect "several" Bluesoleil Bluetooth compatible dongles and will use them. However, these will have limited functionality as Microsoft limits their Bluetooth support.

ADF JDeveloper wysiwyg visual editor does not render properly my jspx page

Hi everybody,
I am working with JDev 11.1.1.5 and I have an issue with the wysiwyg visual editor.
My jspx page does not render properly: I cannot see the full page whatever is the resolution, even in full screen mode.
I've tried to activate in the preferences the option Show Design Time Messages in Log but it does not display any error.
When I run my page or execute a preview of my page, my page is rendered correctly the browser.
Can someone help please?
Thanks by advance

Hi Frank,
I've tried to change the resolution but whatever is the resolution the page is not rendered correctly. Actually, I can see the full page, but there are some panel boxes which are not displayed.
In my page, I have a main panelgrouplayout which contains 2 dashboard panels. The second dashboard contains panel boxes, only the 3 first rows of panel boxes are displayed in this dashboard panel while I have 6 rows of panel boxes.
In the design page, when I click on the 2nd dashboard and do "design this container", I can actually see that all the rows display correctly, it simply that I do not see them all in the main page.
In short, the 2 dashboard panels display entirely, simply the 2nd one does not show all its content while displayed in the main page.
Is there a solution for this?
Thanks by advance

PC Suite does not handle properly messages longer ...

Similar Messages

Maybe you are looking for