Pc Suite doesn't recognize a USB connected E-50

Hi,
Short premise, I'm a noob...  
I've been given an "old" E-50 (first version, without camera, branded). There were no USB-PC cable so I've bought an original Nokia CA 53.
I've downloaded the last PC Suite (7.1.18) and installed it. I'm running XP service pack 2. After the reboot, I've Started the program, followed step by step the program but nothing happens when the program tell me to connect the phone to the usb port. Basically the phone recognize that is being plugged to a pc (it asks me if I want to go in "pc suite mode"), but the pc doesn't regognize the phone.
I've un-installed pc suite and tried again the procedure, but with no luck.
The cable seems to work (since the phone recognize being plugged to a USB port) BUT I've also have a macbook. After downloadying the isynch plug in for the E50 there is no way to make the mac recognize the phone via USB (same pc problme basically....) while via blootooth the program synch the phone just fine.
I really need to have the firmware updated, it's one of the first one and the phone takes ages to send sms.
Thanks a lot for you help.  

try uninstalling pc suite, pc connectivty solution and nokia connectivity drivers
then download nokia pc suite cleaner from http://europe.nokia.com/get-support-and-software/d​ownload-software/nokia-pc-suite/extras/nokia-pc-su​... and run it to clean ur pc
after u clean ur pc, i'd suggest saving the pc suite installer from the website and install it from ur local drive
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Similar Messages

  • N70, PC suite doesn't recognize it when connected

    Please help me, I have a N70 since january 07 and I was able to download some music from my PC. Then a few weeks ago I tried to change music, download new one and download photos. The PC suite always says that there is no phone connected. My PC and the phone recognizes the USB connection but not the Nokia PC suite software. I uninstall and reinstall the software twice, once from the CD that comes with the phone and once from Nokia webpage. Any ideas as what could be the problem and how to solve it???
    Thanks
    Cynthia

    Hi,
    You can find the pc suite cleaner here
    NSU = Nokia Software updater
    Cheers Message Edited by adisaily on 19-Apr-2007 07:23 AM
    Let me be a ripple in the silent stream of your memory ~ Viveca

  • Nokia suite does not recognize my Internet connect...

    My Nokia Suite doesn't recognize the Internet Connection available with my desktop.  Though I'm able to access the internet, my suite says "No Internet Connection Available". Any pointers to resolve this?? Plz help
    I use Nokia Suite 3.3.86
    ~Cheers,
    Kamesh

    Hi All!, enabling log feature i can find this in the log: "isLanAvailable(): LAN is not available."
    log file content:
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 121, .\Application\HomeNotification\SUNotificationHandler.cpp, CSUNotificationHandler::refresh(): Begin
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 102, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isLanAvailable(): Begin
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 132, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isLanAvailable(): LAN is not available
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 102, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isLanAvailable(): End
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 240, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isModemConnectionAvailable(): Begin
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 267, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isModemConnectionAvailable(): Modem connection through CTI-plugin is not available
    [11:44:36:301] SoftwareUpdater Info, Thread [GUI], Line 240, .\Application\Controllers\Helpers\SUConnectivityInfo.cpp, CSUConnectivityInfo::isModemConnectionAvailable(): End
    [11:44:36:311] SoftwareUpdater Info, Thread [GUI], Line 121, .\Application\HomeNotification\SUNotificationHandler.cpp, CSUNotificationHandler::refresh(): End

  • My iPhone charges normally trought power outlet, But it won't charge or recognize trough USB connection on my MacBook, even in restore or DFU mode.

    My iPhone charges normally trought power outlet, But it won't charge or recognize trough USB connection on my MacBook, even in restore or DFU mode.
    Please help me! I'm stuck on restore mode.

    I tried on 3 different MacBooks, it doesn't work.
    I have some updates though... It is recognized on my car sound system, and It is working fine when connected to a windows PC, I was able to normally activate it... so the problem is not on the connector, Macs just don't recognize it.
    Anyone ?

  • Media Encoder doesn't recognize Behringer USB mixer

    I just purchased a Behringer Xenyx X1222USB mixer to  use for live stream events using Flash Live Encoder on my MacBook Pro.  Flash Encoder doesn't recognize the USB input from the mixer.  Other I know the computer recognizes it since I went into the Audio Settings and can see the USB input there with audio levels.
    I use Yosemite platform.  Any help needed as soon as possible.

    So, it looks like Media Encoder is stuck in a trial version?  The only formats available are indeed .f4v, .flv, .mp3 & h.264.  Is a reinstall of Media Encoder the fix?

  • My iMac doesn't recognize by usb keyboard since I installed security update 2015-002

    I installed Security Update 2015-002 on my iMac and since then it doesn't recognize my usb keyboard (I'm typing this with a bluetooth keyboard). I rebooted, unplugged and plugged back in the keyboard all to no avail.
    My system:
    Yosemite 10.10.2
    Mid 2011 iMac 27"
    3.4 GHz i7
    16 GB RAM
    Keyboard: Apple extended USB
    Any help would be greatly appreciated.

    Mine works okay.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one. 
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - About
    Safe Mode - Yosemite

  • HT5437 apple configurator didn't recognize my USB connected Apple TV.

    apple configurator didn't recognize my USB connected Apple TV. should it be a problem if no display connected? cause the plugs space of apple TV for connection is only enough with either micro-USB or HDMI.

    Apple Configurator 1.4.2 is said to support Configuration Profiles for the Apple TV using the "Apple TV assistant" located in the "window" option.
    However, I do believe you need to be on Mountain Lion or higher to perform and receive an update to 1.4.2, but I could be wrong.

  • I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    What specific KB?
    Do you know it works?
    I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

  • Problems with PC Suite 7.1.30.9 USB connection

    Ok, So I've been having trouble the last 2 weeks or so getting this to work. I Correctly installed the PC suite 7.1.30.9 on my PC (windows vista home premium 32) some time back. It used to work well with my old N95 8GB, but after I got the N97, for the week it worked fine and would connect in any compatible mode. But then I started getting an error whenever I connected my N97 or my N95 on PC Suite, It could not detect any phone. When I tried adding a phone using PC Suite, the options for what kind of connectivity I would like to select with my phone were not even highlighted and I was getting an error message about infra red and trouble connecting. I re-installed evrything and then started getting this error message "Connected in non compatible mode" even though I had selected PC Suite on either phones. I tried restarting my phones and PC, but still got the same error. I tried uninstalling and re-installing PC Suite, nokia connectivity cable driver, PC connectivity manager and starting again, but still got the same error. I Even tried that again, but with an older version of PC Suite (6.85.12.0) but no luck.
    The funny bit is It connects easily with no trouble when I use bluetooth but doesn't work work with the USB cable. I know its not the phone because Niether the N97 nor the N95 work correctly with USB.
    Can someone help me, because Bluetooth is way too slow when I'm trying to transfer loads of different data and using my phone as a modem. 
    can't wait for n97 successor
    Solved!
    Go to Solution.

    Hallo,
    i have problem with N97 and usb connection.
    Few days ago i was unable to connect my n97 by usb,  before it was working fine.
    Nothing happend. by bluetooth it was all ok.
    I change drivers in computer ( vista ) i try on another one ( xp ) and still nothing.
    Then i make a hard reset on n97 and after that when i connect by usb it was ok. but...
    But...after disconet usb and n97 turn off and on and try to connect via usb - the same problem???
    What is going on???
    Any ideas???
    Thanks a lot.

  • My IPad 2 doesn't recognize the camera connection kit

    My ipad2 does nit recognize my camera connection kit. Actually the kit is recognized but when I put the chip or plug in the USB camera cable nothing happens. I'm using a Sony Dsc-Tx10 camera. It worked before but now it doesn't. Please help. I'm trying to upload my pictures to my iPad.
    Thank you,
    Josie

    Check it to make sure the card and tray are free of dirt or dust. (You can blow into the empty slot to clean out any dust.)
    Put the SIM card back in the tray, and slide the tray back into the slot.


  • My new 24in imac doesn't recognize my usb external hard drive- snow leopard

    i was attempting to do a new time machine back up on my new mac but it won't recognize the usb external hard drive (kaser 250gb). i used it frequently on my old g5 imac, no problems. i plugged the hard drive into my g4 ibook and it recognized it right away. i followed the apple tip of pulling the power plug out of the wall power socket and pulled all the usb cables out as well (i have the wireless keyboard). i let it rest for over 5 minutes and only plugged in my wacom stylus and usb external hard drive. still nothing. and it doesn't show either in disk utility. i also downloaded as per another thread the 3g ntfs system preference but to no avail. the only thing i can of doing is erase and reformat my external on my ibook, but i don't want to risk loosing the data without a back up.
    anything else i can try? (before i buy time capsule) thanks

    i just checked again by plugging the external into my ibook g4 and checked how it was formatted - mac os extended (journaled).
    Then the 3GFS software is not required at all.
    i have an idea, not sure if it will work and it will have to wait a couple days until i get my firewire back from a friend, but this is what i'm thinking: my intel imac has a 1tb hard drive. could i use target mode between my imac and ibook? with my ibook i'd attach the external hard drive, then using the firewire and target mode start it up. hoping that the ibook hard drive and the attached external hard drive would show on my intel mac for which i could copy over the external back ups onto my imac. once completed, i could erase and reformat the external on my ibook and then try again on my imac to see if it appears on my desktop. do you think this might work (even though it is correctly formatted already?)
    I use Target mode on a regular basis for mounting the internal drive on a Mac to transfer or salvage data. I don't know if you will be able to connect to an external drive on the Target computer. There's not usually any reason for this and I don't know if the Target Mode will enable the Logic board to deal with the USB ports and transfer data. I kinda doubt it, but other more experienced users can jump in here.
    I don't think the problem with your external drive is the format, since you've already checked it and it is already formatted for a Mac. Intel Mac's will mount drives formatted by a PPC Mac with no problems, unless your OS doesn't support the chipset in the USB case that connects to the drive. There are some USB drives that are known to not work well with SL but worked fine with Leopard.
    You can buy a cheap USB case (about $30) and move the drive from the old case to the new case, or buy a USB to IDE adaptor cable (about $20), or you can buy a larger external drive that will work on the iMac and use the G4 to transfer the date from the old drive to a new one. Or you can take both drives to a friend with a Mac and use Disk Utility to restore the USB drive to a partition on the Firewire drive. That doesn't fix the USB drive to work with your new Mac, but unless the vendor comes out with a firmware fix, I think that's a lost cause anyway.
    other than the above, i may just go buy a 1tb time capsule,
    I would not be getting a Time Capsule to back up a single computer. Wireless backups are a lot slower than FireWire or USB (of course, it's the initial backup that takes so much time). If you do have several Mac's that need a TM backup volume, then the Capsule can help you out. It is supported by Apple (and there are a lot of users here in the forums). I'm using a ReadyNAS device for network backups, but it is not supported by Apple, and I have to rely on NetGear for fixes if an OS update breaks my backup system.
    BTW, it's a good chance that a TC device will be able to see and mount your USB drive. The incompatible chipset problem with some drives seems to be limited to the USB drivers in SL which the TC is not running. That's why I said that a USB hub may also let you see your drive, the problem is there's no guarantee's...

  • My computer doesn't recognize my USB cord

    First of all, my printer prints fine if I'm connected with my USB cord in the printer port.  However, when I connect any other device (camera or hooking up to do wireless printing) it keeps telling me to plug it in and it IS!!  Today trying to go from USB connected to wireless printer, during the set up it says "plug in USB port to computer" (or something like that).  Well, the USB was already plugged in.  It continued with that message and wouldn't go any further in the set up process.  All this time, I thought something was wrong with my camera but now I see - it's something else.  So, I tried it with printer on and printer off - no luck.  A bad port maybe?  So, I tried other ports but continued to be told I needed to plug USB cord in.  It's so frustrating-  I have a 7520 HP Printer (with all the bells and whistles).  A Toshiba laptop, and a new General Electric camera (the camera does not come with a CD to load software so it's not that).   I tried setting up wireless using the CD AND by going online to HP site but both tell me to hook up usb cord and won't go any further because it's not recognizing that it IS plugged in!!!!     Any advice....I really need to switch over to wireless because my living room is now arranged differently and the printer is on one side of the LRoom and the computer (laptop) is in the middle of the LRoom.  Oh, you need to know, I took my camera to a computer shop, WITH MY USB CORD, they plugged it in and there were all my photo files -- so it worked with their computer -- same camera same cord I am using now but it won't recognize the device on my computer.   Really puzzled - can you help me?   Much thanks!
    ellis

    You said:
    1) First of all, my printer prints fine if I'm connected with my USB cord in the printer port.
    2)  I tried setting up wireless using the CD AND by going online to HP site but both tell me to hook up usb cord and won't go any further because it's not recognizing that it IS plugged in.
    First of all, dedicate just one REAR USB port to the printer. Stop swapping cables or ports. The wireless setup is different, and is selected during the install process ( you have to momentarily use the USB cable).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • How do i get iMovie to recognize my USB connected webcam?

    I upgraded to imovie 10.0.1 and it will not recognize my usb web cam. It finds the iSight camera just fine and the computer recognizes the webcam in other programs. Is there any fix for this or did I upgrade in error?

    Hi Kevin,
    Welcome to Apple Discussions.
    This forum is for discussions about the new format Discussions recently introduced.
    You will probably get a better answer to your question in one of the two forums (iMovie HD and iMovie 4 and previous) here:
    http://discussions.apple.com/category.jspa?categoryID=141
    Regards,
    Colin R.

  • WRT54G v.8; computer doesn't recognize my secure connection

    Have a WRT54G v.8 wireless router for several months and has been working fine. It's connected to a desktop computer via cable modem. Both of my wireless laptops were able to access the internet w/o problems. Also both computers were able to recognize my secure connection until tonite. Bought a wireless-capable printer and tonite I ran thru the procedure according to the printer's manual to configure the wireless network via a SecureEasySetup so I can print from either of my laptops. I was successful in making the WLAN connection  from the printer to the router (at least that's what my printer told me) but now when I turn on either of my laptops the computers don't recognize my secure connection name, only an unsecured Linksys connection. However when I attempt to connect to the internet I can't. I don't know what to do next. I need to get back my secure wireless connection. Can anyone help me on this? I am very new to this stuff so if you can help you will have to remember you are speaking to a complete novice. Thanks for any help you can provide.
    Message Edited by jac on 10-12-2007 07:22 AM

    Open routers set up page using http://192.168.1.1.
    Click on “wireless” tab, change the SSID to any unique name, channel should be either 6 or 9.save the settings.
    Click on “wireless security” sub tab, change the security level to any one either WEP or WPA personnel or shared. Click save settings.
    Do power cycle & check on wireless computers is you able to see your new SSID.

  • Ovi Suite doesn't recognize my N97's PC Suite sett...

    Hi all. Sorry if this is a double post. I tried searching, but didn't find anything.
    I've recently tried to transfer music from my PC to my Nokia N97. I did this once before using Ovi Suite with no problems, but now I'm having some serious trouble.
    When I plug my phone into a USB port, it asks me the USB mode I want to use, and I select PC Suite, however it then tells me to reconnect my device using PC Suite mode, which I already have done! It doesn't matter how many times I do it, Ovi Suite is adament that my phone is connected in file transfer mode. I've downloaded all the updates, but it hasn't helped.
    I can still connect with Bluetooth, but its slow, and if I connect by dragging and dropping (going to My Computer then to my device) then the music doesn't actually show up in my phone.
    Can anybody give me some advice on what to do?
    Thanks

    If you set Ovi Suite to full screen, does your computer not remember that setting? It should make Ovi Suite fit to screen.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for