PC Suite doesn't show the messages in memory card
Hei,
Phone - 6210 Navigator
PC Suite - 7.1
Memory in use: Memory card
When I open the Communication Centre from PC Suite, it doesn't show the messages. In the left pane, number of messages in the folders is shown as zero. This happens if the memory is set to memory card.
On the other hand, if I set the memory to Phone memory, the messages are shown properly. Why is this happening and what's the solution?
When I tried to take a backup, all data, except messages, is backed up.
Few days back, I could access all the messages via PC Suite. It worked fine. But, now, there's some problem.
I've lots of messages in the memory card & I wanna move them to different folders. How else can I do it?
-Babloo
Hello,
I think I found the cause of the problem. There's some problem with the memory card.
I set the memory for Camera also to memory card and when I take a snap, something something happens. If I set the memory to phone memory, it works fine.
But, I can access the files/folders in the memory card both from the mobile & via PC Suite.
Now, my question is "How do I retrieve the messages from the memory card?"
Any help will be greatly appreciated.
-Babloo
Similar Messages
-
How 2 move the message from memory card 2 phone me...
did anyone know in nokia N73 how 2
move the message from memory card move
to phone memory???? did anyone know
how 2 move it??? teach me plz.....Here is an easy way to move your messages from Phone Memory to Memory Card or from Memory Card to Phone memory In Nokia models.
1- Install latest version of Nokia PC Suite and connect your set.
2- Open Nokia Communication Centre. (Select Phone Memory or Memory Card from which you want to move messages to other memory)
3- Select all messages in a single folder (Inbox/Sent Items or from My Folders) and click on file> export. This will create *.csv file.
4- Download NBU Explorer 1.8 from http://www.soft82.com/download/windows/nokia-nbuexplorer/ (You must have installed Windows Installer 3.1 and Microsoft .Net Framework 3.5 to run NBU Explorer. You can easily download these from Microsoft Site,)
5- Open *.csv file in NBU Explorer and click File > Export All. (Your all messages will be exported as *.vmg files.)
6- Disconnect and connect your phone again in Nokia PC Suite.
7- Now set your target memory in your phone for messages.
8- Open Communication Centre and Select your desired folder then click on file > Import messages by selecting multiple messages *.vmg files. (You don’t have to import messages one by one but you can import all messages in a single folder at once)
9- And you have done it.
10- You can import *.csv list in Nokia PC Suite rather *.vmg files, but in this case, all the spaces (blank spaces) in your messages will be lost. All the text of your messages will be merged to a single line. So exporting via NBU Explorer is recommended.
11- Any query? Contact me at ********@yahoo.com.
MODERATOR'S NOTE:
E-mail address has been removed from this post as it is unwise to post such personal information in a public web forum. This is for your personal safety and privacy.
Edited by: Aikin19 -
PC Suite doesn't show contacts stored in SIM card ...
I own a Nokia 6230i v. 03.88 RM-72, and am using PC Suite 6.84.10.4 on Windows XP SP2.
I found out that:
1. PC Suite doesn't show in the Contacts folder those which are recorded in the SIM card, but only those from the phone memory. Why's that?
2. PC Suite doesn't update its displayed list of contacts: after I add one (through PC Suite or on the phone) the display list is unchanged. To reload it, I have to delete manually its stored database (in C:\Documents and Settings\MyLogin\Application Data\PC Suite\nnnnnn\nnnnnn.db (where nnnnnn is a string of 15 digits).Message Edited by miklos on 28-Aug-200701:59 AMIt's never been a technical problem. You can connect your phone and type in a super terminal using AT command to show/save/delete any contact/sms in sim card.
To do it in AT Command, you have to maintain two sets of protocol (one for AT command access, the other for phone memory access). I think Nokia just doesn't want to handle the complexity (while most 3rd party apps do).
Message Edited by al_lea on 25-Aug-2009 11:51 PM
What's the law of the jungle? -
N85 move messages from memory card to phone
my previous n85 was having problems and they have to reformat the phone to make sure it wan'st a software issue. I backed up my messages to the memory card by selecting Memory Card in Memory used settings in Messages. All my messsages are saved in the memory card
now that i have my new (replaced) n85, how can i move those messages back to the phone memory? when i change the memory used, it woundnt ask me whether to move the messages from memory card to phone memory.
help
75% of the people will believe any made-up statistics they see in a signature just like this one.oh well. i guess i'll just have to start from scratch then. thanks
75% of the people will believe any made-up statistics they see in a signature just like this one. -
apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.
Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?
-
I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!
yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.
-
when I'm looking at my recent text messages on my phone, and I'm on the screen where I see a list of people I have texted. I click on a name to open up the conversation, however it is blank and doesn't show the conversation even though we've been texting back and forth the day before. So my question is how can I see the conversation?
Try the following procedure:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
It seems that the last message sent in imessage doesn't show the date/time.
When I look at the imessage screen it doesn't show the date/time on last messages.
Claudia252 wrote:
Thank you. I cant figure out how to change the lable infront of the number to "iPhone" . It shows "home", "work", "pager", etc. but it doesn't show an "iPhone" option.
In the Contact, tap Edit.
Tap the label in front of the number and another Label screen apears.
Tap the label you want to use. -
My ITunes doesn't show an error message,it just doesn't show the store and when I can search and it finds the song,I can't play it or buy it.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
When I open a message in Mail it doesn't show the Green and Red buttons, so that I can Minimize the Message ... What should I do ?
Press the escape (esc) key to exit full-screen mode.
-
iPhoto 11 doesn't show the photos that I just imported from an SD card, but says its importing to library 15 min after SD card is removed. The import seemed to start normally, I went to mail to check messages, came back to iPhoto & the usual prompt about wanting to delete the photos on the card never came up. The photos didn't show up in events or the library & the device icon wasn't showing so I tried to import again. A prompt then came up saying that I needed to wait until the import was done!
Hi, this problem is also happening to me also. I just took some pics of my daughter on my nikon d3100 and imported them from SD card to iPhoto. It says 'preparing to import' but during the process i do not see the photos being imported. After it was done, there was a new event album, i clicked opend it to see my photos but all of them were blank. I forced quit and re-launched iPhoto but it didnt work, i even re-imported, not to no avail.. Please help. Earlly 2011 13' MacBook pro 10.7.2
-
Mail doesn't show new messages
Mail sometimes doesn't show new messages for an IMAP account. The badge in the dock says that there is a new mail but it doesn't show up in the inbox. I'm sure that I didn't just miss it, because, smart mailboxes will not find that new mail as well. When I restart mail, the mail finally shows up in the inbox as well.
Anybody else seeing this and what can I do to resolve that issue?
Thanks!I'll bring everyone up to speed on what's been happening with my family accounts. I first suspected Safari, because it seemed to be a local problem, but then, inexplicably, all mobileme mail accounts tied to that family account, which included 4 subaccounts and 1 mail-only account, not only did not work in mail.app, but also failed in other email clients I tested, including clients on Linux. Also, the webmail version was not working well, either.
So, if your problem is isolated to a single computer and just to mail.app, or just with a particular network, then I think the local troubleshooting steps are the way to go.
But, if your problem extends to other platforms, clients, and webmail, then it is likely an issue the engineers at Apple will have to figure out. I found the online chat service for mobileme users to be very helpful in checking through all the 'usual suspects' and after we had pretty much ruled out any of the usual culprits, it was escalated to the engineers, who are working on it now.
They were able to release all the email that had been piling up, but there are still some glitches they are trying to iron out. As an aside, I have been personally managing various mail servers for a dozen years, and am well aware of the difficulties in diagnosing email problems, and it was stumping me, and I have intimate knowledge of Exim and Exchange and various email modules used with mx services.
+While this 'should never happen', it's unrealistic for users to expect it never will. Of all the services provided on the Internet, email, is arguably the most complex service and it's become much more complex in the past few years. In my work, typically 94% of all email traffic hitting the server is filtered out as spam. So, the 6% that is allowed through is the stuff most of us see and are spending time and resources filtering out the 20-40% additional unwanted spam that the host let through because if they tightened it down any further the risk of false positives would become too great. I spend way more time on the mail service aspects of my job than the web services, and mail problems occupy at least 80% of my troubleshooting logs. So, while email seems more 'simple' than the exotic and bandwidth intensive services like video chat, voip, and web2 transactions, compared to the amount of wasted bandwidth and cpu cycles filtering packets, I think email is the number one problem service for most host providers. We tried to depend upon it for mission-critical communications, and it was never designed for that initially, and the spammers are making certain it won't achieve that status at least in the near future. If anything, email is your least dependable Internet service. Combine this with the growing array of user configurations, email clients, forwarding/retrieving/syncing scenarios, and user experience, and you may find yourself uttering a little prayer now and then for the poor email administrators and support personnel.+
[end of sermon - thanx for letting me get that off my chest; I feel better now! I'll feel a lot better when my email is flowing smoothly, but that's out of my hands for now.] -
dueing the update IOS 7 7.0.2, ipad show the message is contact the itunes, when I back the house, ipad contact the PC and itunes for recovery the ipad but unsuccessful. Now ipad is not start.please help
I hope this helps. If I understood your question properly, it is the same or similar problem many, including myself, had with the IOS7 update. I'll relay my situation & what I did to rectify it. I have the iPad2 & MACBook Pro. I have an iPhone 5 but won't be updating it.
IF YOU HAVEN'T YET UPDATED YOUR iPAD TO IOS 7... DON'T. NOT UNTIL YOU'RE CERTAIN YOU HAVE BACKED UP YOUR iPAD, AT LEAST. BE ABSOLUTELY CERTAIN YOU HAVE BACKED UP YOUR DEVICE.
FIRST: BACK UP YOUR IPAD, & ALL YOUR DEVICES.
NEXT: CHECK FOR UPDATES ON ALL DEVICES.
I updated my iPad while away from my main wifi connection because using my main wifi for the last update subsequently interfered with my connection thereafter. New problem now.
1.) Once I updated (was it successful/unsuccessful?) Because...
My iPad showed a large apple with a line underneath; then it illustrated & said, "connect to iTunes." i can't accessa thing. (Huh? Doesn't Apple know people TRAVEL FAR away from their MAC with their iPads? I WAS RUDELY LEFT WITH AN INOP DEVICE on the road.)
2.) On my MAC: I checked for all updates, & ensured my iTunes was updated.
3.) I followed thre following instructions from a website (http://www.digitaltrends.com/mobile/ios-7-problems/) I found when researching this common problem. iPhone... iPad... same instructions...
...connect to iTunes and try DFU (Device Firmware Upgrade) mode.
Potential solution:
Hold down the Sleep/Wake button to turn your iPhone off.
Open iTunes on your computer and connect your iPhone.
Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU (Device Firmware Upgrade) mode.
Select your iPhone in the left hand column of iTunes and select Summary then Restore.
You may need to install the iOS 7 update again.
------------------ THIS WORKED.
I followed the instruction & so far so good. DO NOT DISCONNECT YOUR iPAD! It will continue to prompt you through SEVERAL items, including the re-installation of one of your previous back-ups. It appears the back-up was successful & that everything is now back to normal.
Except that now I'm stuck with the juvenile appearance of this new IOS. My Notepad no longer looks like a notepad. Why don't I just type on DOS? My APPLE easthetice have disappeared. If I can, I will revert to IOS 6.
Read more: http://www.digitaltrends.com/mobile/ios-7-problems/#ixzz2g7Y2neAU
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook -
White subfolders that don't show the messages in them
I have some subfolders in folders in my Apple mail that are white vs. blue and though they supposedly have messages in them, nothing is visible. I imagine this is some throwback to eons ago when I made the transfer to OS X from OS 9 and using Eudora for my mail. Is there ANYthing I can do to finally get these folders in my Apple mail to reveal what's in there once and for all?
Well, yes, except that it doesn't show the location. See attached from Mac Help...
*+Spotlight: Opening an item's enclosing folder+*
+Did you know that you can view an item's enclosing folder (and all of its content) directly in Spotlight (a Mac OS X 10.4 Tiger feature)? Just Command-click the item in the Spotlight search results window to view it in a Finder window!+
+Here's another way: Click Show All in the Spotlight search results list, select the item of interest in the resulting window, then press Command-R.+
+Or, in this same Show All window, Control-click (or right-click if you have a multi-button mouse) the item of interest and choose Reveal in Finder from the shortcut menu.+
+These methods work for most files, but not with Mail messages that appear in Spotlight search results (because Mail messages aren't stored the same way as files in the Finder). However, if you double-click a Mail message in a Spotlight list, the email opens in Mail and displays a "Show in Mail Viewer" link in the upper-right corner. When you click the link, Mail will show you which mailbox your message is in.+
Using the "Show in Mail Viewer" link on a message that is not in a Mail plist takes you back to your primary In Box, not the to the location of the message!
The white folder does exist in the Mail folder, but that is where the problem lies. The files used to be stored in there when it was an mbox before it mysteriously turned white. Doing a search in the Mail app does not reveal the the mail messages that used to be contained therein, but doing a spotlight search does, showing that they are in some other directoryon the HD. Spotlight, however, absolutely does not reveal their location, unless there is a trick that I am not aware of....
Many thanks for your reply on this... -
My weather app doesn't show the feels like temp or wind, etc. How can I fix this? I am running iOS 8.1.2.
is that really what it is? this is the native iphone weather app. the funny part is that when i use the actual weather channel app, it does provide it.
is this an api issue with the weather channel and the iphone then? i guess there's no fix?
thanks for your help by the way.
Maybe you are looking for
-
Respone message in an synchronous scenario
Hi, I want to create a scenario: third party system (via WebService) <-> SAP PI <-> SAP (ABAP Proxy) I have a SOAP to Proxy synchronous scenario. Its an synchronous outbound and an synchronous inbound interface. It is possible to transfer the respo
-
PDF files not opening in WebVPN
We have Cisco VPN concentrator 3030. We have configured WebVPN for accessing our internal web sites. We are able to connect to our Internal sites but having problem in veiwing pdf files. Any solution
-
OEM Issue: oemagent stops after some time on specific node on a 3 node RAC system.
We have a 3 node RAC system running 11.2.0.3 . The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs. Oracl
-
Missing titles on export or closing out project/reopening
in FCPX everytime we export (either with the export in FCPX or sending to compressor) or close out project and reopen project -some of our titles go missing and show up as back as the default title or placement of our title gets moved back to defau
-
How can i just block pornography from my computer
how can i block and unblock porn from my computer