Pc suite dos not recognise the connect phone.

I am receiving the error message "pc suite dos not recognise the connect phone.
the connection between the pc and the phone failed, error code 0x80043605. Switch off your phone, switch it on, and try again."
Any idea?
Operative System: Windows XP SP 2
PC Suite version: 6.80.20
Mobile: 7250i
Connection method: cable DKU5
BR,
Leandra

Hi, did running PC suite cleaner 3.3 work for you? I am having exactly the same problem and tried this. PC suite cleaner didn't seem to run properly. I chose the "other" problem type and it said that it could not create a list of directories, please reboot and try again. I did this but no good. I then reloaded PC suite and got the same results.
My phone is 6230i
PC suite version is 8.80.21
Thanks!

Similar Messages

  • PC Suite does not support the connected phone........

    Hi...
    I have a big problem in the delivery of mobile and my type is N70 with Computer shows a message saying that some files missing from the mobile and this is the message that appears when connectivity.
    PC Suite does not support the connected phone. PC Suite settings file is missing from the phone. Switch off your phone, switch it on, and try again.
    Please assist in this matter, I can either send a site that I downloaded through by mobile phone.
    thank you very much..
    Moderator note: telephone number removed. It is not advised to publish personal contact information on a publically-accessible web forum.
    Message Edited by michaels on 14-Feb-2008 08:40 PM

    Hi Guys,
    It always better to give more information when you are posting your issues....Please try to give your system info, versions of the pc suite you are facing the issue :-( so that it may help others to narrow down ur issues :-)

  • Pc Suite does not support the connected phone.Pc s...

    My PC version is XP Service Pack 1.I am using PC Suite 6.7.22.I am trying to connect using Infrared.I get the message as mentioned in the subject.Please help. Thanks in Advance

    YOu can try to restore factory settings and see if the suite support file reappeares to phone. If not, visit service center and ask th ephone to be PRoperly UPDATED(so that the so called content package is also installed, that contains the Pc Suite support file

  • Ovi Suite/PC Suite does not recognize the connecte...

    Error message: "Ovi Suite/PC Suite does not recognize the connected phone.Ovi Suite/Pc Suite cannot read the required information from the phone.Check that the connected phone is supported by Ovi Suite/PC Suite".
    You can try this which can solve your problem.
    1. Disconnect your phone from PC if connected.
    2 .Open Control Panel and go to ‘Programs and Features’
    3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
    4. Click on the ‘Change’ button on top toolbar. 
    5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
    6. Restart the computer if prompted.
    7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

    @ Omarbooyaka,
    Welcome to the forum! You should use Nokia Suite to update your device to Belle. If still the same, please go to control panel > printer and devices > right click the phone icon > remove the device. Then try to connet again. Also try all the steps provided by magovoru. Could you also report the issue here if connection still does not work.
    Hope this helps!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • HELP - PC Suite does not support the connected pho...

    After trying numerous times now I cannot get my question to you via your website. In utter frustration I am posting my problem here.
    My problem is as follows
    When I connect my phone via cable to my laptop I get the following error message. 'PC Suite does not support the connected phone. Install a correct version of PC Suite and try again'. I have already uninstalled the version that previously worked fine and downloaded the version recommended by your website which is 6.80.22. This is actually the version I already had which previously did work. I amd still getting the same error message despite uninstalling and reinstalling numerous times. And when I plug my phone into my partners computer it works fine. He has the same operating system and version of PC Suite. I am using Windows XP Home Service Pack. I have a Nokia 6131

    Thanks for the descriptive posting, unfortunately there are still many things that can be wrong.
    You should try the things that are suggested here in many places: go to control panel - add/remove programs and select first Nokia PC Connectivity Solution and run a repair to it by selecting change - repair. Then same thing for Nokia PC Suite, run a repair to it.
    Then boot PC.
    Then check the PC Suite manage connections icon to make sure that the DKU-2, CA-53 USB connection is activated.

  • I tunes is not recognising the renamed phone?

    My wife is now using our daughters old Iphone 4. We've got a new sim card and created a new Apple account etc. When we connect the phone to the lap top to sync (my wife is signed into I tunes etc) the store says she has 16 updates. But these are for our daughter account. If we try to do the updates the are wanting our daughters ID password. How do we overcome this. Everything on the phone is signed in as my wife. Ideas?

    You can either Delete those Apps Off the Phone and Not Resync them back...
    Or Erase the phone and Start over...
    Go to Settings > General > Reset > Erase all content and settings
    Then Connect to iTunes and just Sync what your Wife requires.

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Nokia PC Suite does not recognise my phone!

    Normally when I plus it in, it takes a little while, but then the phone comes up.
    Earlier today I installed an external hard drive, which used usb to connect. It is now disconnected, and switched off. Do you think that this has "disturbed" the computer, and now it is not recognising the usb cable connected to my phone?
    In my sys tray, the Nokia PC suite icon has a red cross against it. No idea why!
    Any advice gratefully received!!
    Lemon x

    Forgot to mention- I also installed a new printer today, but it uses the same USB as my old printer did.

  • I have a Iphone 42 and want to transfer my photos to my PC why does my computer not recognise the Iphone when I connect it to the pc?

    Can any help. I want to transfer photos on my Iphone 4s to my PC, my computer will not recognise the phone when I connect via the USB port to the PC.  Any Ideas would be appreciated.

    Do you get any response from the computer when you plug the phone in? I'm guessing that you are going into Computer to see if you find the phone? If you go into Device Manager, do you see any errors in the USB area?
    See this support document and pay particular attention to step 5 regarding drivers. http://support.apple.com/kb/TS1538

  • Update does not recognise the phone?

    The phone was update then an itunes logo appeared and will not turn on. It has been connected to itunes but the update can not be completed as it does not recognise the phone. Itunes and laptop are up to date.

    Did you try to connect in recovery mode? iOS: Unable to update or restore
    Is Apple Mobile Device Service still installed and active on your computer? iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
    More tips in this article: iOS: Device not recognized in iTunes for Windows

  • I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone.

    I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone.  How do I get rid of the old Apple ID when it comes to upgrading apps.
    I have been into setting>store and signed out and signed back in and it still asks for old ID and password.

    Everything you've had up to now has been tied to your old Apple ID. You cannot switch it over to a new Apple ID. You should contact iTunes support to help you with this:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.
    For Mac App Store: Mac App Store Customer Service.
    For iTunes: Apple Support for iTunes - Contact Us

  • I am trying to connect my iPad to a canon MX436 printer an my iPad is not recognising the air printer! How do I fix this?

    I am trying to connect my iPad to a canon printer and the iPad is not recognising the printer? What do I do?

    There are troubleshooting suggestions at the bottom of this article:
    AirPrint basics

  • I have an iPod touch 4th generation and have tried to connect it to my Sony BDV-E970W blu-ray player. The player does not recognise the iPod. What can I do to fix this?

    I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?

    As the other replier said, contact Sony. It may not be compatible with the iPod.

  • My i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

    my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I bought I phone 5c from A market in HAITI and i reset the phone ,after i could not activate the phone because it has an apple id,the seller dos not know the id,HAITI has no apple store,the i phone not stolen or in lost mode,SO WHAT I DO?

    I bought I phone 5c from A market in HAITI and i reset the phone ,after i could not activate the phone because it has an apple id,the seller dos not know the id,HAITI has no apple store,the i phone not stolen or in lost mode,SO WHAT I DO?

    There is nothing you can do. That is the Activation Lock that Apple has implemented tout down on theft of their iPhones.
    Most likely the iPhone is stolen.
    It is totally worthless to you.

Maybe you are looking for

  • IPad will no longer sync after iOS 5 update

    I updated my Original iPad to iOS 5 and now it no longer syncs; it stays stuck at the preparing to backup step. This happens whether I try it via WiFi or via the standard way with the cable. I'm thinking I should do a Restore from Backup and get it b

  • Where to find J2EE SDK download for WIN95?

    Where can i find older version of J2EE SDK for download?? Or rather I am interested in free cloudspace database for WIN95. Any pointer will be very useful. Thanks in advance.

  • SSD for Late 2008 Macbook Pro 15

    Hi all, I'm looking to upgrade my old Macbook Pro 15, late 2008 model and would like to ask for recommendations from anyone with experience here.  I'd like to get a 500GB range SSD. Both link speed and negotiated link speed are 3, which I think is SA

  • How can I turn off sleep when an iPod is connected?

    Is there a way to make a PowerMac running MacOS X 10.4.2 NOT go to sleep when an iPod is connected? I can only charge my iPod by connecting it to the USB bus of the computer. The first time I was charging it, my Mac put the display to sleep and I cou

  • Device Software

    Desktop software says that I don't have device software.  When it asks for the disk during installation, comes back with no device software found.  Where do I get this software?   Desktop is version 4.3 Thanks