PC suite need dial pad

Hello
I would like to have in PCsuite dial panel for dialing numbers not in my contact list.
I use PC Suite as follows:
Phone + set BH-700 + the computer
I accept calls simply pressing the button on dialog window which gives out PC Suite, therefore I would like type numbers which aren't present in my telephone directory, also in dialog window PC Suite.

http://europe.nokia.com/support/download-software/cable-drivers
What's the law of the jungle?

Similar Messages

Where is the dial pad

I just joined and followed the instructions to dial but I cannot find any dial pad.
I wrote to the community and there are not instructions.

Where in the world has the dial pad gone??? You send me a note saying my 20 dollar skype credit is going to expire today unless i make a phone call but then you make it impossible to find the dial pad!!!! I want to EFFFING scream i dont have time for this. I have 2 year old that needs my attention right now and still 20 minutes later i still looking for the fricken dial pad!! What a waste of time skype is!!

When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?

When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?

Hello there, curtq.
Great job troubleshooting your issue so far. The following Knowledge Base article offer some great practical steps for troubleshooting Wi-Fi issues with your iOS device:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
If following the initial troubleshooting steps recommended at the beginning of the article, you may want to then proceed to:
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

If I copy a number to dial pad I cannot edit or anything in between

I Cannot edit or add anthing in dial pad

That is true, it is not possible in the dial pad, but you can easy edit numbers by using the notes, contacts, messages Apps etc.
If I need to edit a phonenumber from dial pad I just copy it into Spotlight, wich can be directly opened in dial pad.
Charly

Dial Pad Sounds

Can I disable iPhone dial pad sounds without using the side switch as my only option?

I think it is very big problem. I hate to hear beep sound when I am dialing a number. I just bought an apple 5, but I am going to return it because of this problem. I feel like when I purchase iphone I have to use my iphone according to whatever rules iphone creates. It is my phone and I should be able to change settings and use it however I like it. It is frustrating that for every simple thing I need to download an application and pay for it. Just to be able to make my dial pad silence, I need to go and buy an application. I don't really care about paying for this specific application, but this scares me because I think for every simple thing that I'm doing for my iphone I will need to pay. Even for a very basic setting option I need to pay.

Dial Pad Darkened

my dial pad is darkened, so I can not read the layout - numbers etc. Just installed Skype upgrade didn't fix the problem; anyone offer any ideas on fix? Thank you; this is very troublesom since almost all business uses automated dial access to get to the department youi need; and I can't follow through because I can not see the dial numbes I need to press when promoted.

20Len14 wrote:
Skype dial pad seems to have stopped working - it no longer recognises numbers I punch in after call is connected. Up to a month ago, this used to work fine on my computer, I am on Windows 7 Professional Ver 6.1 and Skype version 7.7.0.103 I have read other threads on this subject but no concrete resolution. I have attempted the solutions mentioned of checking windows sounds settings. recording and playback devices must match, but I'm not having any joy fixing this. Any suggestions?No suggested but wanted to add the same thing is happening to me. I thought it was part of upgrading to Windows 10 as it still works on an old non-Windows 10 pc, but maybe it's not just an upgrade issue. Suggestions eagerly awaited!

Re: Can't find my dial pad

Dialpad is missing for calling phones although I have an active subscription to call anywhere in North America. I've had Skype for over 10 years and never had this problem before.
When I click the dialpad icon or click call phones from top menu, I get this page with no show of the dialpad.
However, I can call any phone numbers I've saved in contacts. I'm using Windows on a regular PC. Uninstalled and reinstalled Skype several times. Didn't help. Any suggestions?+-

No, this is for Skype-out, dialing land lines.
Actually, I just found that the item is in the Call menu. BUT, it is greyed-out until the call is dialed, and there is no longer any way I have found to make dial pad ON the default setting. It now has to be activated for EVERY call instead of always being in the pop-up menu at the bottom of the call screen.
This is absolutely awkward. I just had to redial a couple of numbers, because when I finally got done fumbling around to turn the damned dial pad on, I had missed which number in the spoken menu I needed to select.
SKYPE: Please (!) just leave the key pad always accessible on the call screen Skype-out calls. It makes no sense whatsoever to hide this frequently used necessity.

Show dial pad when answering incoming call

I need to be able to press '1' after I answer an incoming call (Google Voice call screening). The dial pad doesn't appear on the screen. If anyone has solved this problem, I'd be grateful to hear how you did.

format the phone. make sure all users from contact list have set their default number. this helped in my case.
Message Edited by damiri on 30-Aug-2009 10:04 PM

Why there is on the dial pad letters?while there is no names appears while typing numbers or (letters) to dial .. Thanks !

Why there is on the dial pad letters?while there is no names appears while typing numbers or (letters) to dial .. Thanks !

No need to. The system will automatically do so...been like this for years.

Dial Pad doesn't register numbers

With the newest version of Skype on iOS7 on my iPhone I am unable to use the dial pad once I join a call. I need to be able to dial a contact and then input numbers as a PIN to join, however in the new version there is seemingly no easy way to do this.
You must place the call, then back out 2-3 screens to get back to the dial pad, then it doesn't register the digits entered thus effectively rendering it useless for my needs. Is this a known bug, or is there something I am missing?

I'm facing the same issure. Is there anyone going to answer it properly . Its offical skype community . com'n should have answer.

How can I display the dialed digits in the dial-pad window for Jabber 9.7.4

Scenario: From his Jabber 9.7 phone-mode, the customer dials in to a auto-attendant and he cannot see the digits he is entering from the dial-pad icon, it displays **********
Is there any config to allow the display of these digits dialed after the call is connected ?

i solved this problem using this query
SELECT STOCK_CODE, COUNTRY_ID,
SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
FROM HS_DAY_CLOSE
GROUP BY STOCK_CODE,COUNTRY_ID

How to delete one number in the dial pad dropdown ...

When calling a phone number from Skype, I mistyped the phone number. Now whenever I call a phone number, the dial pad's dropdown list includes the mistyped phone number. I want to delete that single number from the dial pad's dropdown list.
Unfortunately I obeyed some people's suggestions in other topics. Now the contents of all chat histories with all ordinary Skype contacts are gone. I used to save logs of those forever, but the attempt to delete one phone call history actually deleted all chat histories with everyone. That was not what I wanted. ... And then, to add insult to injury, whenever I call a phone number, the dial pad's dropdown list still includes the mistyped phone number that I want to delete.
Is there any way to do it?
Even though I make more typos than everyone else, even though my keyboard's Backspace button gets a pounding, surely I'm not the only one?

NOT My day - just typed out a message and clicked Preview. The message is gone. Short reply - this is suppose, at heart, to be a telephone system. BASICS like keyboard entry error correction should be available (in an intuitive way). Backspace doesn't erase last entry and you cannot even delete ALL the entry. Would you fix this or explain why it cannot be done - and then find out how it can.

How to delete one number in the dial pad dropdown list?

When calling a phone number from Skype, I mistyped the phone number. Now whenever I call a phone number, the dial pad's dropdown list includes the mistyped phone number. I want to delete that single number from the dial pad's dropdown list. Unfortunately I obeyed some people's suggestions in other topics. Now the contents of all chat histories with all ordinary Skype contacts are gone. I used to save logs of those forever, but the attempt to delete one phone call history actually deleted all chat histories with everyone. That was not what I wanted. ... And then, to add insult to injury, whenever I call a phone number, the dial pad's dropdown list still includes the mistyped phone number that I want to delete. Is there any way to do it? Even though I make more typos than everyone else, even though my keyboard's Backspace button gets a pounding, surely I'm not the only one?

NOT My day - just typed out a message and clicked Preview. The message is gone. Short reply - this is suppose, at heart, to be a telephone system. BASICS like keyboard entry error correction should be available (in an intuitive way). Backspace doesn't erase last entry and you cannot even delete ALL the entry. Would you fix this or explain why it cannot be done - and then find out how it can.

I can't access my dial pad to make calls. The last few days when I go to the phone a pop up appears that says "unfortunatly contacts has stopped working" after pressing ok to remove the pop up, it goes back to the home screen. This also happens when I

The last several days I have not been able to access the dial pad. When I go to phone a pop up appears that says "unfortunatly contacts has stopped working." To remove the pop up you have to hit 'ok', the it goes back to the home screen. This also happens when I go to contacts.

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Paste phone n° out of email in work environment to the phone dialing pad is not possible

Hello,
I am trying to paste a phone number out of an email in my work environment to the dialing pad of the phone.
When I do that, I receive the error message that I am not allowed to paste work content into a personal application, although I am in the work environment and I have also opened the phone in the work environment.
When the email recognized the phone number "automatically," I am able to call that number.
I am using a Z30 with the software release 10.2.1.2102.
Thank you.
Regards.

Hmmm go back and sign out and turn off iMessage then after that reset all settings, its not going to delete anything off the phone. After reset all settings. Go back turn imessages on and sign back in.

PC suite need dial pad

Similar Messages

Maybe you are looking for