PC Suite not automatically picking up an E61 phone...

This is just something to share...
For a long time my phone would not connect to my PC in the morning. It used to work fine with my previous phone (6230i), but since upgrading to an E61, it would not connect automatically. I would have to click on "Get Connected" and run through before it would connect, and my phone would not always appear.
I had some help from Miksu, which confirmed that everything was setup correctly. I then changed the name of my phone under "Bluetooth settings" from:
Spindellis-Nokia E61
To:
SpindellisNokia E61
The problem has gone away. The PC now picks up the phone automatically. The moral of the story: do not use a dash in the name of your phone under Bluetooth settings when using an E61.

For more information - it's not the dash that had caused the problem - I think it is because I had paired my phone to my computer in the Toshiba Bluetooth settings. So I think that the Bluetooth stack was pairing with my phone, which stopped my phone then pairing with PC Suite. Changing the name of the phone (ie removing the dash) helped, but it was still a bit flakey. Deleting the connection in the Toshiba Bluetooth Stack has made things nearly perfect.
So the conclusion is, before installing PC Suite, make sure the latest Toshiba stack is intalled, but DO NOT run through the "Add New Connection Wizard" to make a connection. Instead, manage all connections through PC Suite after installing PC Suite.

Similar Messages

Having issues with my iphone 5 on wi-fi- does not automatically pick up wifi and doesnt remember passwords

I just picked up my iphone 5 yesterday and I am having issues with wifi.
When I tried wifi for the first time I selected my home network and entered in the password for the network and found out the following issues:
1) if you turn off wifi or turn on airplane mode or off, and then turn on wifi again - the phone does not remember the network's password and I have to re-enter it evey time plus manually select it
2) when wifi is on, not automatically detected nor does it select my network on its own have to manually go in and select a network
Help! Do I need to call Apple? Anyone else getting this?

I just managed to figure out the problem here. What you have to do is manually add the network by selecting "Other..." and filling in the information instead of selecting the item from the list of networks.

Files saved from Elements 12 editor not automatically picked up and stacked in organizer

I have just upgraded to Elements 12 from version 6 and find that if I select a file in the organizer, select "Edit with Photoshop Elements editor", carry out the editing and save the file with the boxes for "include in elements organizer" and "Save in Version Set with original" checked the edited photo is not automatically included in the organizer nor stacked. On returning to the Organizer it tells me that a new photo has been found in the watched folders and I have to import it and stack it manually. What can I do to corret this problem?
Bob

Already several messages to confirm this is a bug.
See:
http://forums.adobe.com/message/5790289#5790289
You can add your vote in the feedback forum.
http://feedback.photoshop.com/photoshop_family/topics/save_in_version_set_not_working_in_p se12
The workaround would be to kill the 'ElementsAutoanalyzer.exe' process, as described here:
http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/

When I plug my phone into my computer, Itunes does not automatically open, help! My phone does not connect with Itunes anymore..

Please help!
I am trying to connect my phone to itunes via computer
and for some reason it is not being picked up
this has only happened after i recently updated itunes
any advice on how to connect it?
when i authorise my phone to it, it says it is already connected to this computer
however does let me access my phone via it.

which operating system on the computer?
which version of itunes
does it not show up at all or just not auto launch itunes

Not automatically joining network at login

Using a netgear DG824m, 802.11b - everything working fine till I did a clean install. Now when I login, the wireless network is not automatically picked up, although it's visible in the airport menu bar icon.
I just have to select my network and the WEP encryption all happens fine. Network preferences are configured to automatic, I tried Join selected network but it doesn't help.
Any ideas?

Fixed it! Seems that the network password was stored in a system keychain that the other users couldn't access. Logged in with admin rights, deleted the old network password from the system keychain (via keychain access), joined the network again via internet connect.
Then looked at the new password item in the system keychain, there's a tab for accessibility - selected the Allow access to all applications.
Then logged in as other users, selected the network - computer then asks if admin will allow access to password, on a once off or permanent basis.
With the network system preferences set to automatic, seems to join network at login without any problem.

Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

I have just purchased CS4 with Bridge for my new MacIntosh. In Bridge for the PC, when I double click a photo it automatically brings up Photoshop. On the Mac version, it gives me an error message saying that part of the application is not loaded. I completely uninstalled the program, and reloaded the application and still get the same message. So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries: "Open with CS4 (default)" and "Open with CS4." This works if I pick either option. My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice. What is wrong with the Mac install, and how can I fix this issue?

Thank you for your help. I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries:

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

Issue with freegood item exclusive not getting picked up in the order

Dear experts,
I have done a setup for freegood and activated the freed good functionality in the order.
I have added a material which is different from the standard product. However, the ssyetm doesnt pick
up the added product in the sales order but always the repeats the main product in the next line item.
I want that the system, the time I entered the main material, automatically picked up the free goods exclusive materail in the next
line item.
I dont know what I am missing here.
Thanks for the advice.
Cheers

Hi,
Please check the condition records foro your free goods in VBN1 transaction
whether you have maintained in Exclsive or not
in exclusive view check whether the FREE GOOD category is exclusive and maintain the Additional material in the field AddMat FrGD
thanks,
santosh

Output Message Type MAHN not getting picked up in PO

Hello Experts
   I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
Any help is appreciated.
Thanks
Ankit

Hello Tej
I have maintained output device but same result.
Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
Steps for new Message Type for PO Reminder (ZMAH)
1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                    (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
2.     Defined new access sequence Z515 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 1
Table = 026
Description = Purchasing Output Determination: Document Type
Requirement = 103
Exclusive = Yes (box checked)
Access Sequence Number = 2
Table = 027
Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
Requirement = 103
Exclusive = Yes (box checked)
3.     Maintain Output Type ZMAH for PO
General Data
Access Sequence = Z515
Access to condition (Checked)
Multiple Issuing (Checked)
Change Output
Program = SAPFM06P
FORM Routine = ENTRY_NEU
Replacement of Text Symbol
Program = SAPMM06E
FORM Routine = TEXT_SYMBOL_REPLACE
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = External Send
Communication Strategy = 0001 (E-mail Document)
Processing Routines
Transmission Medium = 5 (External Send)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = MEDRUCK
Partner Roles
Medium = External Send
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 3
CType = ZMAH
Name = Output for Reminder
Short Text = Urging letter (expediter)/reminder
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1 (Purchase Order)
Step = 101
Cntr = 3
CTyp = ZMAH
Description = Output for Reminder
Requirement = 103
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZMAH
Med = 5 (External Send)
Funct = VN
Name = Output for Reminder
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Vendor = 101281
Partner Funct = VN
Medium = 5 (External Send)
Date/Time = 4 Send immediately (when saving application)
Output Device = LP01
Cover Page Text = Reminder PO number &EKKO-EBELN&
Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
Thanks
Ankit

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve

Does ipod nano automatically pick up new purchases when I plug it in to the computer?

When I bring new music into my itunes library the song is checked. will the nano automatically pick up new purchases when I plug it in again? Or do I have to start over? I hit sync again but not sure whether I have to do that every time I charge it.

Depends on how you have your iPod set up to Sync. For example if your iPod is configured to sync only checked songs and videos, make sure each new track you add to iTunes has a tick mark next to it. The next time you sync your iPod (assuming it set up to automatically sync), the new tracks will be added.
B-rock

Debit Items not getting picked while making payment with F110

HI,
When making payment with F110, items with Debit balance is not getting picked.
Example:
Payment method is assigned in the Maser data.
For a particular vendor one item has a credit balance- posting key 31.
We have posted another JV with F-02 and debited that vendor with Posting key 21. (Payment Method is not entered in the line item)
When we run F110 the credit balance is picked and debit balance is being shown in exception list.
When we got to FB02 and insert payment method in debit line item and then again run the F110 then system pickes all line items and pays the net amount.
The question is why system is not considering Payment Method from Master Data in debit line item, while in credit line item it is picking payment method from the master data.
Do I need to do any setting for it so that it should automatically take payment method from master data even in case of Debit line items.
Regards
Sanjay

Hi All,
Thanks for your quick replies.
But it does not solve my problem.
When I am not assigning any payment method to either Debit or credit line items, system picks (payment method from Master data) for only credit line items and ignores debit line items.
But the problem is that when I assign payment method to debit line item (which is similar to what has been assigned to vendor Master Data) system groups both debit and credit line items and makes payment of only net amount.
My question was why system considered the debit line item for making payment if I manually enter payment method in the line item, if system has been designed only for out going payment. In my opinion It should have reacted similarly irrespective of whether payment method entered in the line item or not.
Regards
Sanjay

Items not getting picked up in Return sales order

Dear all,
I am creating a return sales order with reference to a sales order.
In my delivery doc the items can be categorised into 3 types:
1- Picking done; Movement type determined
2- Picking done; Movement type not determined
3- Picking not-done; Movement type determined
In the return order, only the items of 1st type are coming. Why others not getting picked up? Can they be entered manually?
regards
Sapshed

Dear Hrishikesh,
Thats Ok. Picking is done only for those items for which Relevant for Picking is ticked.
What I want to know is that, for items that have either their picking not done or Goods movement not determined, they are not getting automatically picked up while I create a Return order w/r to a sales order.
thanks
Sapshed

Need to Stop Serial/Lot control item to be automatically picked

Hi,
I have an requirement for auto (schedule pick release). But customer wants that only non serial/lot controlled items will be auto picked. But Lot Controlled and Serial Controlled (At Receipt) items will not be picked automatically. How I can achieved that ?
Thanks for your help.
Regards,
Amit

Hi Sayantan,
You do have a couple of options depending on what release of the apps you're on and how you set the Inv Org parameter Allocate Serial Numbers.
From 11.5.10 on, a potential new value can be set for this parameter (available also on 11.5.8 and 9 via backport patch). The parameter governs the way serial numbers are allocated at Pick Release.
Previously, the values available for this parameter were just a basic “No” (the default value) or “Yes” (whereby Oracle would auto-suggest, in a non-intelligent way, available serial numbers at the time of pick release). The new value available is “Yes – User-defined” which allows some custom logic to be applied to the serial number allocation.
With the value set to “Yes – User-defined”, Oracle checks for any custom code in the INVSRSTB.pls stub/custom hook when a pick release is launched. (Inv_Detail_Serial_Pub.Get_User_Serial_Numbers)
Regards,
Jon
P.S. Also take a look at *Auto Pick Confirm Flag Does Not Work For Serial Items If Allocate Serial Number is Set to'Yes User Defeined' [ID 337964.1]* on MOS.

Different storage location automatically pick for same material code

Hi,
As per my requirement,
We have two storage locations i.e Return Location and Finished Location and single plant and single shipping point.
At the time of Normal delivery system should be automatic picked Finished Location and return delivery system have to pick Return Location only.
I tried to do Storage location determination but system is not picking correct location. Kindly guide me.
Thank You!
Chakradhara

Check this thread
Creation of return order with ref to an Invoice
G. Lakshmipathi

PC Suite not automatically picking up an E61 phone...

Similar Messages

Maybe you are looking for