Pc Suite Not Connecting

I have Nokia E5-00 which was priviously connecting fine to my pc via Pc Suite , but now when I connect it my pc it promt me to a bubble notification on task bar that a hardware is connected and then nothing further happens , previously it shows that E5-00 found but now it doesnot shows that in short my Nokia is all connecting through mass storage , image transfer but it is not connecting via pc suite, plz help me i dont khow that the drivers are not installed or what but plz help me.
Solved!
Go to Solution.

1. Try another USB port ..
2. Un-install 'Nokia Connectivity Cable Driver' thru' Windows Control Panel .. Reboot both PC and Phone. Connect the phone to PC and wait for the Drivers to get re-installed.. Check if it gets connected ..
Hope you are using the latest version of the Nokia Suite / Nokia PC Suite ..

Similar Messages

OVI Suite not connecting to map server - NOT SOLVE...

Because this /t5/Nokia-Ovi-Suite/OVI-Suite-not-connecting-to-map-server/td-p/708275 discussion has been marked as solved and it's not. I wonder when we'll have any feedback from Nokia Support? It must be the new Nokia Ovi Suite causing the problem because we all have the same problems. I have tried on three different computers with good stable internet connections and get the "connection timed out" error on all of them. Using Nokia 5230 and have tried both on XP and Vista.

@mokrypes
This seems to be working now. I tried today to download US maps and it completed and installed without any issues. Guess there was some problem with the map server.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

OVI Suite not connecting to map server

After installing the latest NOKIA software updater, the OVI Suite is not connecting to the map server. It stays: "Wait while retreiving the available maps..." for ever. I unistalled the updater, but the problem is still there. Any ideas to solve this?
Solved!
Go to Solution.

Same problem with my Nokia X6 - "The connection to the Ovi Maps timed out". Now I have no maps
Nokia, give us the old version of Ovi Suite - this one is a piece of **bleep**. I tested on 3 different computers and the problem appeared on each of them regardless that 1 of the computers was with Ovi Suite and PC Suite already installed, the other had only Ovi Suite installed and the third had nothing of the above installed.

N80 PC Suite not-connecting via USB

Connected once via USB cable (CA-53), but won't connect again.
N80
PC Suite version 6.80.53.3
Windows XP Pro version 2002
Service Pack 2
No anti-virus running or firewall upon installation.
Phone data cable mode-"PC Suite"
No USB connection "beep" on laptop.
No error message, just the typical "working" icon.
Did spend some time searching the discussion site, but couldn't find anything.
Appreciate any suggestions or help out there in cyber...
Thanks

I do not recognise the PC Suite version ? If there is no bleep sound, if indicates that the physical connection does not happen, so pressing the connector firmly to its place might help, also changing the usb port in your pc

6822 and PC Suite 6.84 Will not connect via Blueto...

I have just downloaded PC Suite to connect to my Nokia 6822, having reloaded the O/S on my laptop.
Phone 6822
O/S Windows XP Pro SP2
PC Suite 6.84.10.3
Bluetooth Stack WIDCOMM 3.0.1.905
The phone shows as being paired (padlock symbol) but still requires pairing. Put in a new passkey and verify ut on the phone, the phone connects but the connection wizard does not move on, it locks up.
Cannot get pcsuite to connect top the phone at all
Help

I really could not get more frustrated with Nokia than I am at the moment.
Firstly I have been trying to login and/or register a new account so I can post here for almost 24 hours. The web site returning 404-not found or simply a blank page not only from my computers at home but a couple at work too.
This really is not good enough. There isn't even a contact point for the webmaster that I could find to warn of these failures.
Back to the plot. . .
I have paired with WIDCOMM on both the version of PC Suite that came with the phone (a 6822) and the latest download-able version doing complete uninstalls between of all Nokia components using uninstall and add/remove programs.
Both version ask me to pair with the phone (the later one asks me to pair even though it shows the phone with the padlock symbol next to it in the list, indicating it is already paired). The phone connects and then within seconds disconnects.
Connection via infrared works fine but this is not what I want to do for many reasons.

Nokia N70 and Pc Suite 6.6 not connecting properly

I am having problems connecting to my phone from windows xp and pc suite.
Whenever i try to "backup" or use "file manager" i get connection errors. Nokia connection manager is showing connected ok. When i click 'file manager' i can see the N70, but as soon as i try to 'explore' it by double clicking i get an error similar to 'Operation could not be completed'. (sorry not at home at the mo, experiencing parity error in my organic memory! ;-p)
History:
I Previously had Pc suite 5 installed and connected via bluetooth to my Nokia 6600. I believe the problem is the old PC Suite software as I can connect on a works laptop but not from my home pc. I have removed all previous Bluetooth, Nokia software via add-remove programs but still no luck.
I have tried renaming my memory card and even re-formatting and renaming, no luck.
System Details:
Windows XP SP1
PC Suite 6.6 Rev 18
Nokia N70
CA-43 usb cable
v2.0539.1.2 19-10-05 RM-84
Can anyone help? I really don't want to uninstall and re-install windows if i can help it!

sorry, i thought i was replying to a different thread i had allreayd posted my problem in, whihc is...
I had the firmware updated on my N70 today to get rid of the dreaded orange home screen at a nokia dealer, but when I try to connect to my PC it won’t work.
When I first got home and plugged it in via USB windows first told me the USB device was not reqocnised, so I pulled out the cable and put it in as advised. it seemed to be ok then, but just after i went to transfer some music over but it wouldn’t let me (as if my phone was not connected) and PC suit said I didnt have a phone connected, although I could see my phone under 'my computer' but couldn’t transfer any thing over.
So I downloaded PC suite again to make sure I had up to date software and drivers, I already had them it seemed but I unistalled and install them again just in case. But when I come to set up the connection the set up screen simply hangs, although the cable is working as windows makes that noise and it pops up to say N70 found, but then a second later says the install didn’t work, all the time the setup screen still hangs in the background.
I have tried every thing in this thread and others including doing the clean setup from nokia.
My firmware version: 3.0546.2.3.18-11-05RM-84
Windows XP SP2
Please help.
Thanks

N8 will not connect to ovi suite via bluetooth (as...

my N8 will not connect to my notebook (asus n53sv with win7 home premium x64) via bluetooth using either pc suite or ovi suite but will pair directly to my notebook. both ovi suite and pc suite attempt to connect to the N8, but cannot authorise the connection. is there a solution available?

The iPhone 3G does not support this. Only the 3GS and up support internet tethering via Bluetooth.

Could not connect to server Ovi Suite 3.1.0.84

when i update my nokia e71, ovi suite asks for login id and when i put username it show could not connect to server check your internet etc.. my internet is perfectly working . i have tried all ways like GTE cerficates removal and rootupdate etc. i m fed up of these.. plzzz help me nokia experts. i m using Ovi Suite 3.1.0.84 and also used .94 version but no help. i m using Xp SP3 with 1.49 gb ram and 50 gb hardisk

Download and upgrade new version NOS3.1.0.86 and try
http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

How to fix: Nokia Ovi Suite could not connect to t...

How to fix: Nokia Ovi Suite could not connect to the Nokia account server
https://profiles.google.com/111711145986835145800/posts/57KK7mZPLfL#111711145986835145800/posts/57KK...
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

did this
https://www.google.dk/search?q=itunes+iphone+error+0xE8000003&oq=itunes+iphone+e rror+0xE8000003&aqs=chrome..69i57.4857j0j7&sourceid=chrome&es_sm=91&ie=UTF-8
got these
https://discussions.apple.com/thread/5408879?tstart=0
https://discussions.apple.com/message/12650630#12650630
https://discussions.apple.com/message/23805897#23805897
https://discussions.apple.com/message/23305865#23305865

Ovi suite always connects thru the mobile, not dir...

I am trying to update the software in my n8-00 to fix a connection problem. (so, I can't connect to internet at this stage thru my mobile) I installed the ovi suite and tried to update it (as mentioned in nokia site as an alternative to updating the nokia software using mobile phone itself) . Ovi suite doesn't connect to internet if the mobile is not connected. when the mobile is connected, it alsways connects thru the mobile. I want to update the ovi suite via the internet connection I already have in my laptop, which is thru the wireless lan. Can some body help me?

If what you mean by 'fix a connection problem' is related to the internet on your mobile..call your operator and request them to send Aceess Points settings.. First delete all the existing Access points from the phone... and when the settings are received ( normally thru' SMS).. open the message and select 'SAVE'... Now see if your connection problem is resolved or not..( without any software update...)
If not then again delete all the Access Points.. Now try the Software update thru' OVI suite.. Since the settings are deleted.. OVI Suite should use the Internet from the Laptop... Once done.. again open the SMS and select 'SAVE' to set the Access Points...

PC Suite - E60 - Error Message "Could not connect ...

Hi Everyone!
PC Suite displays that the phone (E60) is connected via Bluetooth. No problem there, but I still cannot connect to the phone.
I upgraded (clean install) to the last version because I often had problems when I pressed "Messages" or any other item in the PC Suite that would connect to the phone.
Always the same message "Could not connect to the phone" would come up.
Often the error went away by simply restarting the notebook (Dell 640m).
Now that I've upgraded I cannot connect to the phone at all, which is strange because according to PC Suite I am connected. Also the pairing on the phone shows the notebook as usual.
Any hints what the problem could be?
I reinstalled PC Suite and all other software connected to it several times (also went back to 6.83), always using a registry cleaner, also used the repair feature. Now neither 6.83 nor 6.84 can connect to the phone.
Thanks in advance for any help!
Here the sys info:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.4
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 10.0
Build 6822
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 2609
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180

There are numerous posts in this forum (and any other forum out there) about the problems Windows PCs have about the fact that in XP there is Microsoft provided native Bluetooth software and then for a reason or another you have installed the Widcomm Bluetooth (or that may have even been installed by the PC vendor)
Those Bluetooth softwares conflict with each other and particularly it is difficult fot PC Suite to use those 2 softwares simultaneously. PC Suite dores not know itself if the phone is "present", it knows about the connected phone only if the Bluetooth software in the PC tells that info.)
I had that same situation, it worked (kind of), but PC boot and stand by etc, always caused problems.
Search for "uninstall widcomm" in this forum and you will find many posts about the topic. most likely also you will find instructions how to disable widcomm and lett Microsoft Bluetooth Enumerator take over.
But read the posts first since I do not know which setup you would prefer. Also, while I briefly looked at the posts there at least has been some talk about anti-virus programs interference with Bluetooth softwares, but I am not sure if that is relevant anymore.

Pc suite goes not connected

hi. I have 6131 and pc suite. all was working nice but lately i have to authenticate phone and "get connected" each time i wanna use BT . before it was always online.
i have set the BT option working all time in my cell. what could be the prblm?

Hi hmiko,
You can do this:
1. Open PC Suite Get Connected Wizard and unpair your phone
2. Open Bluetooth settings on you phone and remove your PC from known devices list
3. Re-start both PC and phone
4. Open PC Suite Get Connected Wizard and connect your phone again.

N73-1 PC-Suite (V6.81) does not connects - help pl...

I installed PC Suite, when tried to " get connected" PC-suit hangs with never ending Busy sign on the screen. pls help me.

You should update to 6.83. First you should manually uninstall PC Suite, PC Connectivity Solution and Connectivity Cable Drivers from Add/remove Programs, then install PC Suite 6.83.

Got 3G coverage yet not connecting to web

My Iphone 4 has stopped connecting to the internet but I have got 3G coverage. The loading cirle moves as normal yet the page doesn't load and a message comes up ; cannot open page - safari cannot open the page because it is not connected to the internet.
I have went through all the setting i.e full reset on my phone with no joy.
Is it because I have not updated my software since I got the phone a month ago for it's still got versio 4.3.3.?

1) If you have updated OVI Maps application to v3.06 this uses a different set of maps to those preinstalled on mass memory for v3.04. You may need to delete E:\CITIES + .qf file usually at bottom of list if using File Manager in Office folder, re-start OVI Maps application to re-initialise and re-define necessary folder structure to download more maps with OVI Suite > Maps on PC
3) and 4) probably related as settings sent by Tesco and saved by you end up in wrong destination (Uncategorised). Go to Menu > Settings > Connectivity > Settings > Destinations > Uncategorised - you'll probably find Tesco WAP, Tesco WAP GPRS and Tesco MMS here. If you longpress on any access point a new screen with more choices pops up, for Tesco WAP and Tesco WAP GPRS choose Internet destination. Now go to Internet destnations and probably need your WLAN as Priority 1 and Tesco WAP GPRS as Priority 2 for starters. For this highlight access point > longpress >choose "Change priority" and then highlight say access point in Priority 1 > OK and it jumps up the list.
When you open web browser click "Options > General > Access point > change to "Ask when needed" and next time you can change it to say "Internet" where home WLAN is Priority 1.
Post again when you are a bit more familiar with this as probably then have more questions.
Happy to have helped forum with a Support Ratio = 42.5

HP C510A eStation Printer - Zeen: Not Connected - Can No Longer Connect To My Wireless Network

Up until a couple of weeks ago, my C510A was working well. Every so often the wireless sync would fail and I would have to resync the Zeen tablet, or unplug/replug back in the printer to regain sync, but now... Nothing!
My Firmware is: ZEP1CN1130AR
Printer IP: 192.168.1.74
Zeen IP: Not Connected
SSID: Visible
Mac Filtering: None
Security: WPA/WPA2 PSK
Signal Strength 3-4 Bars (I can move closer to the router and watch the bars increase, and move further away and see them decrease. So the wireless radio is on and functioning within the Zeen!)
The Zeen cannot connect to my network and is never given an IP address, so I can't set the printer up with a static IP address. It just keeps trying to sync with my network and failing. Over, and over, and over, and over again... I have reset the Zeen to factory using the Power On/Volume Up combo. I have uninstalled my HP printing software suite, redownloaded the latest version of the entire suite from the HP Support site, and have installed the drivers/printer both wirelessly and via a USB connection. I have powered down my wireless access point and powered it back up to see if that helps, but nothing does.
uVerse Cisco 2Wire i3812V Gateway/Router
Netgear WNDR3700-V1 configured as a wireless access point (Thanks to the crappy 2Wire POS above.)
I have numerous laptops (Mac and Windows), a Mac Mini, 3 tablets (WebOS, IOS, and Android), IOS and Win8 mobile phones, a Roku 2 XS, various TV's and Blu-Ray players, a Wii, and this malfunctioning HP printer connected to my network via 802.11 DB wireless AND a wired gigabit network. I run a Plex Media Server on the Mac Mini which is my HTPC for our home. The printer was working fine in this setup until a couple of weeks ago.
From reading the many Zeen threads here, and on other forums, it's obvious that there is some sort of ongoing connectivity issue with the Zeen tablet on this printer. HP has been conspicuously silent on the issue, and there is precious little to go on in the HP Knowledgebase, or in replies on this forum. I've suffered through being hung up on, as well as trying to explain my problem to tech support reps who both do not speak English very well at all, and are unable to grasp concepts and analogies in English.
My frustration level is HIGH at this point. My printer is out of warranty, and if there is a hardware issue with the printer then I fully expect to have to make the decision as to whether it's worth repairing or not, but I do FULLY expect to be able to talk to someone in technical support who speaks English about the issue and try to diagnose and fix the problem if it's just a software/networking/configuration issue at NO CHARGE, just like I do with every other product that I own!
So I'm coming here to try and find an answer to my problem before I reach the point, and it's very close right now, of totally severing ties with HP, Compaq, and all the rest of their subsidiaries both here at home, and at the company I manage (where I pretty much make all of the hardware decisions). This just isn't the way to treat your customers.
Any help and suggestions are greatly appreciated.

Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP.

Pc Suite Not Connecting

Similar Messages

Maybe you are looking for