PC Suite Prblm with 6230i Error 0x80043605 via IRD...

Hi all,
i´m trying since month to get my 6230i snyc with my PC.
The 1.st Install of PC Suite works, but after a vew snyc, its works not.
Now i tried all new Version of PC Suite i got last 3 month, without success.
I assume that Nokia writes some **bleep** in My registry.
My Setup:
Microsoft Windows XP
Build 2600
Service Pack 2
Sprache: English
Sprache für Programme, die Unicode nicht unterstützen: Deutsch
Gebietsschema: Deutsch
Eingabesprache: Deutsch
Nokia PC Suite:
Version 6.84.10.4
Sprache: Deutsch
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Nokia 6230i V 3.88 RM-72 Code 0526544.
When i switch on my Phone the error 0x80043605 pops up.
When i use a different Program i can read and sync the Phonebook. Tried severall speed and all IR Driver, bu w.o. success. The regsvr32 NCLIrDAMM.dll is done as well, but no luck.
Contactet Nokia Helpdesk via Webformular but it tooks WEEKS to get an answer, and allways only questions regarding the OS. So hope to get Helped out here.
Thanx

Hi,
thanx.
Tried and found that i can send from PC--> Phone, but i can not send from Phone ---> PC.
Message on the Phone says "send failed".
I tried it without opening Nokia PC Suite, but i gor the same error Msg on the screen from my Laptop.
Now i went to my eventviewer and found some error Msg:
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1004
Date: 30.08.2007
Time: 07:48:49
User: NT AUTHORITY\NETWORK SERVICE
Description:
Detection of product '{A982E6CC-9F0D-4948-9B18-BDFD55DE4A72}', feature 'PCSuite', component '{9B373FD2-8E0A-4A76-80C7-63B6521FD237}' failed. The resource 'HKEY_CURRENT_USER\Software\Nokia\' does not exist.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Can u explain what thats means?

Similar Messages

  • New suite crashes with c++ error.

    Hello, i've installed the new version (slovenian) of pc suite 6.81.13. I have a nokia 6260 phone and a core duo laptop. Program itself installs perfectly, it recognize my phone. But when i push the button backup (or almost every program within) it goes with c++ error. or runtime error. With synchronizing is different, it does not accept my phone as valid one. Well, i had a laptop before, sure not core duo one, but suite works well. Is this now happening because of core duo? Thanks for any help...

    I do not think that the core due is the issue here, but something else. Can you tell exactly what type of crash error messages you get ?

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

    Hi!
    I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
    Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
    It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
    The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
    Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
    Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
    All help is greatly appreciated!

    I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise.  After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD.  This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON! 
    Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
    Am conrtacting them, but, here's the Debugger output:
    Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Dump\MEMORY.DMP]
    Kernel Bitmap Dump File: Only kernel address space is available
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
    Machine Name:
    Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
    Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
    System Uptime: 0 days 0:03:09.864
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                    *
    Use !analyze -v to get detailed debugging information.
    BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
    *** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
    *** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
    Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
    Followup: MachineOwner
    6: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    KERNEL_SECURITY_CHECK_FAILURE (139)
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arguments:
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    Debugging Details:
    TRAP_FRAME:  ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
    rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
    r8=0000000000005aa0  r9=00000000000007ff r10=ffffd00066cc8000
    r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe cy
    nt! ?? ::FNODOBFM::`string'+0x682b:
    fffff802`0f9e8cdb cd29            int     29h
    Resetting default scope
    EXCEPTION_RECORD:  ffffd0002852d338 -- (.exr 0xffffd0002852d338)
    ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
       ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
      ExceptionFlags: 00000001
    NumberParameters: 1
       Parameter[0]: 0000000000000003
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    BUGCHECK_STR:  0x139
    PROCESS_NAME:  System
    CURRENT_IRQL:  2
    ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_PARAMETER1:  0000000000000003
    ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
    LAST_CONTROL_TRANSFER:  from fffff8020f9ddae9 to fffff8020f9d1fa0
    STACK_TEXT: 
    ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
    ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
    ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
    ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
    ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
    ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
    ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
    ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
    ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
    ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
    ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
    ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
    ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
    ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
    ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
    ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
    ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
    ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
    ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
    ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
    ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
    ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
    ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
    ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
    ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    SYMDS64+71be6
    fffff800`1d7a0be6 33d2            xor     edx,edx
    SYMBOL_STACK_INDEX:  5
    SYMBOL_NAME:  SYMDS64+71be6
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: SYMDS64
    IMAGE_NAME:  SYMDS64.SYS
    DEBUG_FLR_IMAGE_TIMESTAMP:  51f84c44
    FAILURE_BUCKET_ID:  0x139_3_SYMDS64+71be6
    BUCKET_ID:  0x139_3_SYMDS64+71be6
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:0x139_3_symds64+71be6
    FAILURE_ID_HASH:  {bf9be68b-5f04-08d4-3152-3d420dc362f6}
    Followup: MachineOwner

  • PC Suite won't connect to internet via N95

    Hello.
    I am using laptop with vista and I have installed newest version of PC Suite. Previously I was connecting via Nokia 6300 and N70, both with no problems, than I tried yesterday with N95 and I get an error in OneTouchAccess: "Failed to connect to the network! The modem may be used by another application or the modem may not be configured properly." I have ran out of ideas, I'v tried reinstalled pcsuite, the problem is the same. Settings are OK. Does anybody know how to completely delete PC Suite? Because when I reinstall it, it always connect immedieately when is installed.
    Can PLEASE someone help, it is driving me crazy
    TNX

    Nokia PC Suite Cleaner will remove any data that is left on your computer after having uninstalled the Nokia PC Suite.
    This freeware program will help you with any possible problems that may come with uninstalling the Nokia PC Suite. You can choose your type of problem from a drop-down menu during the installation and then the Cleaner will take care of it.

  • Loading of 'SAPVIEW' import package is interrupted with R3load error

    Hi all,
    I'm doing a fresh QAS ERP installation and facing an issue at phase "import abap". Whereby it stucked at the last package SAPVIEW.
    Error below:-
    bash-3.00$ cat SAPVIEW.log
    /usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20110301011409
    /usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
    Compiled Jan 23 2008 20:34:30
    /usr/sap/QAS/SYS/exe/run/R3load -ctf I /tempcd/ERP/exp/1/EXP6/DATA/SAPVIEW.STR /tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/DDLDB6.TPL SAPVIEW.TSK DB6 -l SAPVIEW.log
    /usr/sap/QAS/SYS/exe/run/R3load: job completed
    /usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20110301011416
    /usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20110301011416
    /usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
    Compiled Jan 23 2008 20:34:30
    /usr/sap/QAS/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
    (DB) INFO: /ISDFPS/V_REFCOD created #20110301011557
    (DB) INFO: /ISDFPS/V_SA02DB created #20110301011557
    (DB) INFO: /ISDFPS/V_SA04DB created #20110301011558
    (DB) ERROR: DDL statement failed
    ( CREATE VIEW "/ISDFPS/V_SA08DB" ( "MANDT", "TCODE", "REPORT_SEQNO", "REPORT_TCODE", "TTEXT", "SPRSL", "SEPARATOR" ) AS SELECT T0001."MANDT", T0001."TCODE", T0001."REPORT_SEQNO", T0001."REPORT_TCODE", T0003."TTEXT",  T0003."SPRSL", T0001."SEPARATOR" FROM "/ISDFPS/CFDPSA08" T0001, "TSTC" T0002, "TSTCT" T0003 WHERE T0002."TCODE" = T0001."REPORT_TCODE" AND T0002."TCODE" = T0003."TCODE" )
    dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
    (DB) INFO: disconnected from DB
    /usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20110301011559
    /usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20110301112849
    /usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
    Compiled Jan 23 2008 20:34:30
    /usr/sap/QAS/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
    (DB) INFO: connected to DB
    (DB6) INFO: COMPRESS YES is set during table creation.
    (DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
    (DB6) Compression threshold is ignored.
    (DB) ERROR: DDL statement failed
    ( DROP VIEW "/ISDFPS/V_SA08DB" )
    dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) ERROR: DDL statement failed
    ( CREATE VIEW "/ISDFPS/V_SA08DB" ( "MANDT", "TCODE", "REPORT_SEQNO", "REPORT_TCODE", "TTEXT", "SPRSL", "SEPARATOR" ) AS SELECT T0001."MANDT", T0001."TCODE", T0001."REPORT_SEQNO", T0001."REPORT_TCODE", T0003."TTEXT",  T0003."SPRSL", T0001."SEPARATOR" FROM "/ISDFPS/CFDPSA08" T0001, "TSTC" T0002, "TSTCT" T0003 WHERE T0002."TCODE" = T0001."REPORT_TCODE" AND T0002."TCODE" = T0003."TCODE" )
    dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
    (DB) INFO: disconnected from DB
    /usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20110301112929
    /usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20110301145228
    /usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/QAS/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
    Compiled Jan 23 2008 20:34:30
    /usr/sap/QAS/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
    /usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20110301155009
    Does any of your ever encounter the error. Go thru SNOTE: 709389 for reference but its seems to be not relevent and really confusing.
    Thanks in advance.

    > If you suggested system copy, we've even try that but stucked with different problem.
    Doing system copies is a standard process and pretty well documented. What problem did you have?
    > So we decided to do a fresh installation and perform client copy once QAS is up. Hope this way is possible
    Well, that may or may not work. You'll need to be on the exact same support package levels, generated tables are not copied (e. g. from CO) and other things. So doing a real system copy is better for a QA system.
    > Can i manually create this table "ISDFPS/CFDPSA08"  in DB2 via OS level and run the SAPinst from option 'continue with old setting'?
    I'd check in which package the missing table is and why this table is not properly created.
    Markus

  • HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

    I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help!  There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

  • SSIS 2012 package runs under SSDT but fails with permission error from SSMS

    I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
    However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
    I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
    SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
    I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
    it is using.
    So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
    If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

    I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
    the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
    "This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
    within SSMS".
    Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
    Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
    when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
    A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
    Ok let us know your findings. If it doesn't work you can also test it with a password and username:
    net use f: \\financial\public  yourpassword /user:username
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • How to send error message via a mail to the customers email id

    HI experts ,
    i have a requirement,In idoc where i have to send the error message via email to a perticular emailid?
    please help me n tell also which fm is used for that?
    Thanks
    RAhul Sisodia

    Hi ,
    Check this Link..
    [sending an email with multiple attachments;
    Regards,
    Sachin M M

  • Problem creating A/R Invoice with Withholding tax data via DI-Server

    Hi!
    Using the following SOAP Request to the DI-Server, I wanted to create an A/R Invoice having a withholding tax data but it always respond with an error saying
    Total taxable amount of all rows exceeds the base amount  [INV5.TaxbleAmnt][line: 1]
    SOAP Request:
    <?xml version="1.0" encoding="UTF-16"?>
    <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
      <env:Header>
        <SessionID>203A3C01-7808-4638-8322-2307DF3C0F8F</SessionID>
      </env:Header>
      <env:Body>
        <dis:Add xmlns:dis="http://www.sap.com/SBO/DIS">
          <Service>InvoicesService</Service>
          <Document>
            <DocType>dDocument_Items</DocType>
            <HandWritten>tNO</HandWritten>
            <DocDate>2010-02-08</DocDate>
            <DocDueDate>2010-02-08</DocDueDate>
            <TaxDate>2010-02-08</TaxDate>
            <VatDate>2010-02-08</VatDate>
            <CardCode>NPI</CardCode>
            <Comments>test di-server soap message 1</Comments>
            <DocumentLines>
              <DocumentLine>
                <ItemCode>TRC</ItemCode>
                <Quantity>1</Quantity>
                <Price>1000</Price>
                <TaxCode>OVAT</TaxCode>
                <VatGroup>OVAT</VatGroup>
                <TaxLiable>tYES</TaxLiable>
                <WTLiable>tYES</WTLiable>
              </DocumentLine>
            </DocumentLines>
            <WithholdingTaxDataCollection>
              <WithholdingTaxData>
                <WTCode>C140</WTCode>
                <TaxableAmount>1000</TaxableAmount>
                <WTAmount>100</WTAmount>
              </WithholdingTaxData>
            </WithholdingTaxDataCollection>
          </Document>
        </dis:Add>
      </env:Body>
    </env:Envelope>
    OVAT rate above is 10%.
    The withholding tax code C140 is setup as
    rate=10,
    Category=Payment,
    Base Type=Net,
    % Base Amount = 100,
    Rounding Type = Commercial Values.
    We are using the New Zealand/Australia localization in SAP B1 2007A PL49.
    The above code can be successful only if I set the <WithholdingTaxDataCollection> node to:
            <WithholdingTaxDataCollection>
              <WithholdingTaxData>
                <WTCode>C140</WTCode>
                <TaxableAmount>0</TaxableAmount>
                <WTAmount>100</WTAmount>
              </WithholdingTaxData>
            </WithholdingTaxDataCollection>
    setting TaxableAmount equal to 0 which is not desired.
    Can anyone extend me some help, please?
    Thanks.

    Albert,
    Did you try adding this via the DI API and not the DI Server?  Do you get the same error?  Please see this SAP Note ...
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001303019
    Eddy

  • Why is my MacBook Pro coming up with an error message when trying to update Software?

    I brought my MacBook Pro today and I have been trying to carry out the software updates, there are 9 in total. It takes about half an hour to download them all, then it tells me to restart. Once I have restarted, it then says it is installing the updates. After a minute it comes up with an error message. It then tells me that one or more of the files downloaded are corrupt!! Why is this happening as I have not done anything else with the laptop since I brought it??

    Just re-download the updates via Software Update or you can download standalone updaters from support.apple.com/downloads/.
    If you are on a slow connection it's probable that caused the corrupt files problem.

  • External Drive Disk Erase Failed with the Error Input/Output Error

    I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
    The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
    The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
    After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
    One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
    Matthew

    SOLUTION!!!!
    I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
    At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
    Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
    If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
    Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
    Nick
    Powerbook G4 550Mhz   Mac OS X (10.4.6)  

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

Maybe you are looking for

  • How to adjust volume within a single track?

    I have recently purchased Logic Express 9 as I moved from a PC to MAC.If i record a single track, such as vocals, is there any way I can adjust the volume level at different places on that single track? I was able to do this very easily in Acid Pro.

  • 11g Preview 4: Where is the Heap Window?

    I can't seem to access/see the Heap Window for Heap debugging. Has it healed up? Thanks.

  • Standard and Extended ACLs?

    I just want to know that if extended IP access lists can do all tasks, I mean extended access lists have a lot of controlling parameters, then why people use Standard Access lists instead of Extended access lists. I just want to know that in which sc

  • CS2 crashes when I make a web gallery.

    MacBookPro is generating peculiar greek prerence files when I use PS CS2. Have uninstalled and reinstalled. Still can't make a web gallery and still crashes on web gallery. Have archived and reinstalled system. Any suggestions???

  • How to avoid decimal numbers?

    Hi Experts, I am picking PO Quantity(MENGE) field from RSEG table and displaying in the report output. It is displaying the value has '13.000' , but I need to display the same value has '13' in the report output. Just I need to avoid the decimals cha