PC Suite says Connectivity Cable Drivers: Not inst...

PC Suite 6.82.22.0 System info shows the message -Connectivity Cable Drivers: Not installed??

Try reinstalling just the drivers (pick the drivers for the cable you have):
http://europe.nokia.com/A4144936

Similar Messages

Connectivity Cable Drivers: Not Installed???

I have installed the PC Suite 6.82; I have installed the Nokia Software Updater 1.1.40en; I have perfectly synchronised my Nokia N73 using PC Suite, but it still can't be discovered by the NSU. When I tried to look up why this problem had appeared, I found in the System Info given to me by the PC Suite that Connectivity Cable Drivers had not been installed. I checked in Control Panel - they WERE there. Anyway, I decided that uninstalling and reinstalling PC Suite and NSU will solve the issue, but it didn't. I still CAN synchronise the phone and CAN'T get it discovered by the NSU and thus - update its firmware.
Any ideas of how the problem could be solved?Message Edited by ivoalex on 18-Nov-2006
07:05 PM
Message Edited by ivoalex on 18-Nov-2006
07:06 PM

Try reinstalling just the drivers (pick the drivers for the cable you have):
http://europe.nokia.com/A4144936

PC suite - Cable drivers not installed???

After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

try this:
/discussions/board/message?board.id=pcsuite&message.id=11480

Nokia 6210 Nav, PC Connectivity Cable Drivers

When trying to connect my 6210 to my PC it takes about an hour or more and it says it is installing the PC Connectivity Drive. After all this it seems to only stay connected for a short time and then drops out. Can anyone offer help? Thanks

if you're on vista then it's common for this OS to take very long time to install drivers. but that should happen the first time you connect the phone only, after installation the phone should connect without problems after that.
anyway,1- try to remove your version of nokia pc suite
2- run a registery cleaner if you have one
3- download the latest version of nokia pc suite
4- install the app, wait for it complete and ask for a reboot.
5- reboot the pc, connect the device.
if you experiance any problems with driver installation again, stop automatic search of drivers , and direct the search to (c:\program files\nokia\connectivity cable drivers) that should speed the installation.
i hope that will help
Fear not those who argue but those who dodge

Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

Internet connection error saying a cable is not plugged into the network adaptor

Hi, I have a
HP Pavilion Media Center m8530f Desktop PC recently my hard drive quit working so I installed new hard drive same brand Seagate just bigger storage had to install using my original recover discs that I created when I bought computer in 2008 from HP refurb it is still all original no upgrades and when finish could not connect to internet, get message a cable is not plugged into the network adapter "Local Area Connection", I have checked cable it is plugged into adapter I plugged cable into my laptop and it recognises it immediatly, I uninstalled network adapter and went to HP and downloaded adapter for my computer spec on to falsh drive and reinstalled on computer still same message, under devce manger adapter shows up and has no warning symbols when i run check on adapter it says it is fine.
NEED HELP, Thanks Ronbo68

It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I updated my ipad2 to ios7 and now it won't allow me to download photos from my iphone..it says connected device is not supported (on the iphone)

I updated my ipad 2 and my iphones to ios7...now when I plug the adapted in to download my images from the iphone to the ipad..I get a message saying that the connected device is not supported...It worked before ios 7 what do I do?

Same problem here. I am trying to load photos from my iPhone 5 to my iPad 3. The iPad asks me to trust the iPhone, and the iPhone says "iPad: device not supported". I am using the camera connection kit w/ USB connector and my iPhone lightning adaptor. This worked before iOS 7.

ISE Webpack, Cable Drivers not installing for Debian Wheezy

Trying to install ISE Webpack with cable drivers yield the following error during installation:
Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
Since drivers are not installed, attempting to launch iMPACT later on gives:
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT:923 - Can not find cable, check cable setup !
The entire install.log can be found here:
--Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
--Installing cable drivers.
--Driver versions in this package: windrvr=1301, xpc4drvr=1041
--Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
--HostName = invidia
--Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
Digilent Cable Drivers Installer
Checking for prerequisite: libusb-1.0
libusb-1.0.so.0 is present
Installing component: Digilent Adept Runtime
Adept Runtime Installer
64-bit operating system detected
Installing runtime libraries.....
Checking to see if libdabs.so is already installed....
Existing installation of libdabs.so found. Checking to see if this version should be installed.
Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
Checking to see if libdaci.so is already installed....
Existing installation of libdaci.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
Checking to see if libdaio.so is already installed....
Existing installation of libdaio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
Checking to see if libdemc.so is already installed....
Existing installation of libdemc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
Checking to see if libdepp.so is already installed....
Existing installation of libdepp.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
Checking to see if libdftd2xx.so is already installed....
Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
Checking to see if libdgio.so is already installed....
Existing installation of libdgio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
Checking to see if libdjtg.so is already installed....
Existing installation of libdjtg.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
Checking to see if libdmgr.so is already installed....
Existing installation of libdmgr.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
Checking to see if libdmgt.so is already installed....
Existing installation of libdmgt.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
Checking to see if libdpcomm.so is already installed....
Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
Checking to see if libdpcutil.so is already installed....
Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
Checking to see if libdpio.so is already installed....
Existing installation of libdpio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
Checking to see if libdpti.so is already installed....
Existing installation of libdpti.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
Checking to see if libdspi.so is already installed....
Existing installation of libdspi.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
Checking to see if libdstm.so is already installed....
Existing installation of libdstm.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
Checking to see if libdtwi.so is already installed....
Existing installation of libdtwi.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
Checking to see if libjtsc.so is already installed....
Existing installation of libjtsc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
Successfully installed runtime libraries.
Installing system binaries.....
installed "/usr/local/sbin/dftdrvdtch"
Successfully installed system binaries in "/usr/local/sbin".
Installing firmware images.....
Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
Installing JTSC device list.....
Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
Installing CoolRunner support files.....
Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
Installing CoolRunner 2 support files.....
Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
Installing Adept Runtime configuration.....
Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
Installing USB UDEV rules.....
Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
Successfully reloaded UDEV rules.
Successfully updated dynamic loader cache.
Successfully installed Adept Runtime.
Successfully installed component: Digilent Adept Runtime
Installing component: FTDI Drivers (libftd2xx)
FTDI Driver Installer
64-bit operating system detected
Checking to see if libftd2xx.so is already installed....
Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
Successfully updated dynamic loader cache
Successfully installed FTDI Driver
Successfully installed component: FTDI Drivers (libftd2xx)
Installing component: libCseDigilent
Installer for Plugins for Xilinx Tools
Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
Found plugin "libCseDigilent" version "14.1" by "Digilent".
Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
Successfully installed 1 plugin(s) for Xilinx Tools.
Successfully installed component: libCseDigilent
Successfully installed Digilent Cable Drivers
--Kernel version = 3.2.0-4-amd64.
--Arch = x86_64.
--Installer version = 1100
--Unsetting ARCH environment variable.
--File /lib/modules/misc/install_windrvr6 does not exist.
--Installing USB drivers------------------------------------------
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
--File xusbdfwu.hex exists.
--File xusbdfwu.hex version = 1030
--File xusbdfwu.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
--File xusb_xlp.hex exists.
--File xusb_xlp.hex version = 1028
--File xusb_xlp.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
--File xusb_emb.hex exists.
--File xusb_emb.hex version = 1028
--File xusb_emb.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
--File xusb_xpr.hex exists.
--File xusb_xpr.hex version = 2004
--File xusb_xpr.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
--File xusb_xup.hex exists.
--File xusb_xup.hex version = 1030
--File xusb_xup.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
--File xusb_xp2.hex exists.
--File xusb_xp2.hex version = 2300
--File xusb_xp2.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
--File xusb_xse.hex exists.
--File xusb_xse.hex version = 2006
--File xusb_xse.hex is already updated.
--Product ID 0007 is already in the usermap.
--Product ID 0009 is already in the usermap.
--Product ID 000d is already in the usermap.
--Product ID 000f is already in the usermap.
--Product ID 0013 is already in the usermap.
--Product ID 0015 is already in the usermap.
--Product ID 0008 is already in the usermap.
--Installing windrvr6---------------------------------------------
--Checking version.
--File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
--Setting source version to 1301.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
USE_KBUILD = no
checking for cpu architecture... x86_64
checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
checking linux kernel version... not found
make -f makefile.wd clean
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
--make windrvr install rc= 2
--install_windrvr6 rc = 2
--Module windrvr6 is not running.
--Module xpc4drvr is not running.
--Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
and must be changed to allow access to other users.
--real rc=2
--Driver installation failed.
--Digilent Return code = 0
--Xilinx Return code = 1
--Return code = 1
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
What are the steps required to fix the drivers on Debian Wheezy?
Thanks in advance
Andreas Frisch

I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
I had exactly the same problem and now I'm forced to BUY a Linux distro in order to build PetaLinux?
Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?

TS1425 it won't disconnect it says connected but is not showing up under devices in ITunes

I Pod is not showing up under devices in ITunes...it is connected to my MacBook Pro and it says connected ...but it is frozen...

I'm not a Mac user, but do one of the following:
> Restart your mac.
> uninstall & reinstall iTunes
> reset your iPod (if possible)
> make sure iTunes is up to date.
This is what I really know, I don't use a mac. If this doesn't help, then sorry.
Message was edited by: keeferaf

Bluetooth (i have been using for a while) says connected, but is not working.

I have a Macbook pro, just updated to Yosemite, and now blue tooth (devices I have been using) don't work even though it says connected. I have googled the possible problems-tried all the fixes, nothing has helped.

My experience in this situation has been that's it's related to the visa card, and not necessarily the phone or the iTunes store. In addition to verifying all of the credentials on the card as entered, I'd also check with you card bank and see if they have declined the charges due to some type of security concerns. I have a Chase card, and they will decline a charge even though there are sufficient funds available, if the charges meet some security screening criteria.

IOS 7 GM Bluetooth say connected but does not play.

I've been using iOS 7 and bluetooth stereo on my iPhone says connected to my Pioneer stereo, but nothing plays, The stereo also says not connected. Has anyone had this bug? I hope apple fixes this before official release because my Nexus 4 connects perfectly. It's an iOS issue.

Had the same problem connecteing with USB to my stereo.
it was suggested I do this by user lllaass
<Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.>
And it worked for me.

My FaceTime says connecting but is not

My face time says connecting but when I or the other person answers it won't work and remains to say connecting

Hey Mamichula,
Thanks for using Apple Support Communities.
Looks like you are having trouble with FaceTime. These two article should be able to help you get this issue resolved.
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/ts5419
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Have a nice day,
Mario

OVI Suite says my X6 is not in PC Suite mode

I have a Nokia X6, just installed the software update for it. I have the latest version of OVI Suite.
When I try to connect my X6 to the OVI suite, it recognizes it, but when I click the phone, a balloon appears and says that my X6 is not in PC Suite mode.
Tried out every possible solution and nothing works.
- repair all nokia components from the control panel
- reinstall OVI and connect phone disabling internet connection
any real solution for this problem?
Thanx

Contact Nokia.

BEFW11S4 Problems - Says connected but will not connect to Internet

Hello, everyone, I have one desktop hooked up to a BEFW11S$ router. I also have another desktop and a notebook running off of it. The main one, as well as the other desktop work perfectly fine, while the other desktop is just a bit on the slow side, but the laptop, which says it is connected will not connect to any form of internet, whether it be IE or MSN. I'm not sure, but I think the connection between the computers needs re-establishing. Though I have no idea how to go about doing this... Any help? T.T
Message Edited by ravens6938 on 01-02-200702:23 PM

Hi… I would suggest you to delete preferred wireless networks on your wireless laptop, and then try to reconnect to the wireless network. Also check what ip address you are getting, is it a valid ip address from the router. Try deleting cookies in internet explorer. Then check the connection. You cannot change anything on the router because other two computers are working fine.

New macbook, airport says connected but browser not working

Hi,
Just got a new macbook.When I connect to the internet the airport says it's connected to the network, but my browser won't work like it isn't connected.I have connected a few times,so I know it does work, but now it won't work at all.
Don't know what to do!

Having an internal IP address is essential.
Go to System Preferences>Network and note the color of the "Dot" to the left of Airport. Red=No connection, Yellow=connected but no IP, and Green=working.
Double click on Airport and click on the TCP/IP tab. Check to see if you have an IP address. Click Renew DHCP lease. Apply now if it is available. Open Safari and see if it works.
Let me know what happens.

PC Suite says Connectivity Cable Drivers: Not inst...

Similar Messages

Maybe you are looking for