PC Suite - System Error

I can not sync my phone with PC Suite.
I know that the phone is connecting, because I can see my messages in the PC suite window.
Clicking on the Sync logo in PC Suite I get the following message "Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation." and the message "System Error" on the handset.
II have uninstalled PC Suite and NSU, and used the nokia cleaner...and Reinstalled PC Suite (v7.1.26.1) and NSU (v1.6.13 en) on my notebook.
The handset is a 6110 Navigator (24.01) V06.01 RM-122. I have reset my handset to the factory default settings.
I am using XP SP2, USB or Bluetooth, same problem.
I can not reinstall PC Suite Support as it is greyed out in PC Suite.
When I try to run NSU, it hangs that the first "starting application" window, and then error message "Sorry, Nokia Software Updater service in unavailable, please try again later".
I have kept on digging to try and sort this myself...
If I set PC Sync to sync everything but callendar/tasks, it works fine. Even with callendar set for 1 Day past and 1 Day future it still fails.
Some posts talk about bad characters in your outlook calendar, but I can not delete my entire calendar as the whole reason I need this is my calendar at work.
Another post talks about your PC Sync profile in the phone, but mine seems OK. Not sure what it should be, but it seems normal.
I still have no idea why NSU fails.
Any advice or solution?
Message Edited by daewoo01 on 05-Jun-2009 07:10 AM

Continue to try and solve this problem...
When I try to open the calendar on the phone, it just flashes and doesn't do anything.... so the problem is obviously with the phone...
Nokia Care just suggested I reset to default settings, which I did, no improvement...
any ideas?

Similar Messages

Adobe Bridge gives a system error

Adobe CS4. Installed on my mac. Does not recognize Raw files and when i try to open Bridge says a system error has occured.
Adobe Photoshop Version: 11.0
Operating System: Mac OS 10.9.0
Camera Raw 5.0
Please help

Does not recognize Raw files
From which camera make and model?
Supported cameras
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Compatible Adobe applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Error message in PO : System error (error in method PO_POST)

Hi all,
I'm working on BAdI ME_PURCHDOC_POSTED
for Requisition qty checking with PO qty with some tolerance(+/-).
For some conditions I have to terminate the PO posting(ME57).
In the implementation of the method POSTED, afetr some validations, mentioned the statement:
This is my custom message in method >
message e032(/SISLEMCU/MSG01) with wa_ekpo-matnr
When doing this the posting of the document is terminated.
But after it displays the custom message, it followed by the message "System error (error in method PO_POST)" and then terminated.
Here are my questions:
1.I don't want to display "system error (error in method po_post)" message.
2. I want the the screen to hold the data i entered previously after the custom message was prompted and not terminate straight away, as i will need to reenter my data for PO again.
Thanx in Adv.
Regards
Uday

Change for a BADI more suited (not in the update of after-save process) like ME_PROCESS_PO_CUST (Method PROCESS_ITEM, CHECK).
ME_PURCHDOC_POSTED is too late.
Regards

C7 General : System Error while deleting the photo...

It show me system error when i attempted to delete the photos. Even i had my photos deleted on mass storage mode and ovi suite, it's seem that the deleted photos is still in the memory when i open the photo app.
Some one please help me on that i'm running out of memory. thank you.

hi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin.

Adobe Photoshop CS6: Photoshop.exe - System Error The program can't start because ONCoreFoundation7

I get this error after updating ONONE premium edition 8 to 8.1
been to their site no luck in resoving error.
I click ok to error PS cs6 still launches, just annoying.
ONCoreFoundation7.dll is part of ONONE 7

after updating ONONE premium edition 8 to 8.1
does not say windows 8 or 8.1
again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
does not say 7
here's your more info
I'm trying to fix an error message not covered in the knowledge base.
I open PS CS6 (after updating to PE 8.1) and I get an error message...
Adobe Photoshop CS6: Photoshop.exe - System Error
The program can't start because ONCoreFoundation7.dll is missing
from your computer. Try reinstalling the program to fix this problem
I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
Does anyone know the fix? I even tried reinstalling PE 8.1.
PE=Premium Edition

C7 ovi maps - check in - system error

I didn't have any problem with ovi maps but after I updated my C7 from pr 1.1 to 1.2 check in function doesn't work and it says "SYSTEM ERROR". Any solution ? Please help... I am about to blow
Solved!
Go to Solution.

pj98 wrote:
Try updating to the latest Ovi Maps 3.06 11wk10 version, it should now be available via SW Update menu, Ovi Suite or from Ovi Store.
For the benefit of Mac users or anyone else, application also available for direct download from here:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-c7-00...
Happy to have helped forum with a Support Ratio = 42.5

N95 Clock System Error

My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
Regards

03-Dec-2007 04:25 PM
n95_pilot wrote:
My N95 has suddenly started giving me a "System Error" when I try to access either the Clock program or the Time and Date update page from the Tools menu. Otherwise the phone works normally and displays the correct time and date on the display during normal operation.
I have tried to perform a "Factory Reset" and this does seem to cure the problem, but the error returns as soon as I perform a Memory Restore using the Nokia PC Suite backup/restore utility.
Is there any way to cure this problem without losing all my data and having to re-enter it again manually??
Regards
try to get the latest N95 software, ya know NSU...

Noki c6-00 system error

hi whem i press menu button in my c6-00 it showing system error .how it can be solved.

Although all data would be deleted have you tried reset to factory settings by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user) or keep RED, GREEN & CAMERA all depressed whilst powering on until Nokia "Shaking hands" logo appears. If still issues follow advice to re-install existing device software using option in Nokia Suite upon PC.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Startup - System Error

Today, wehn I switched ON my mobile, it took longer than usual but when it finally loaded it gave this: 'System Error'. The device works fine though. Firstly, somebody help me by explaining what that is and why did it occur. Secondly, how can I correct it?
I own a Nokia E7.
Awaiting replies.

farby wrote:
First, Back-up all your data thru' Nokia Suite...
In case it appears again, perform a Soft reset by dialing *#7370# followed by 12345 (Default code unless set by you).
Please be aware that user data deleted from both C:\ and E:\ by this reset procedure.
Happy to have helped forum with a Support Ratio = 42.5

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

System error in nokia 500

Hi,
When i am switch on my mobile ,it shows msg as 'system error'.
Kindly reply

Hi vilasj1977,
Welcome to the Nokia Support Discussions!
When did it start to happen? What troubleshooting steps have you tried to solve this? If you haven't tried any, you can follow these:
1. Reboot the phone. Turn off the phone, remove the battery and wait for a few seconds. Return the battery to its place and then switch on the device.
2. Restore factory settings. This will restore the phone's default settings and will not affect your personal information.
Go to Settings and Phone > Phone management > Factory settings > Restore
The default code is 12345 unless otherwise changed.
3. Make sure that the phone's software is up-to-date. You can check this by going to Menu>SW update. If you intend to use the Nokia Suite, click on the SW update icon.
If there's no update available, you may try to reinstall the software using the Nokia Suite. To do this, click on the highlighted word "reinstall".
Hope this helps. Let us know the outcome.

System Error - 6110 Navigator

I can not sync my phone with PC Suite.
I know that the phone is connecting, because I can see my messages in the PC suite window.
Clicking on the Sync logo in PC Suite I get the following message "Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation." and the message "System Error" on the handset.
When I try to run NSU, it hangs that the first "starting application" window, and then error message "Sorry, Nokia Software Updater service in unavailable, please try again later".
I have uninstalled and Reinstalled PC Suite (v7.1.26.1) and NSU (v1.6.13 en) on my notebook.
I have reset my handset to the factory default settings.
I can not reinstall PC Suite Support as it is greyed out in PC Suite.
Any advice or solution?
Solved!
Go to Solution.

Well, NSU failure usually has nothing to do with the phone, but rather with the Internet connection. Try disabling your firewall or antivirus software, or connecting through another network (at work or at a place where wi-fi is available). It also may be a problem with Nokia's servers - a week ago I couldn't launch my NSU either, with the same error message, even though it was working fine the day before. After a day or two of trying, it started working by itself.
v05.15 | 30-Apr-2009 | RM-328 | © Nokia 6220c-1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I hate kudobeggars!

Cannot save for web - unknown system error Photoshop CS5

I've attached the error I recieve here: http://img838.imageshack.us/img838/5624/screenshot20101027at122.png
What happens is I create any new document, and when I try to save for web it comes up with "unknown system error has occurred'. Prior to this it worked perfectly (pretty much just 2 hours ago)! Also, my Photoshop CS4 stil works properly. I've been searching for solutions but nothing has come up in regards to this particular error.
I'm running the CS5 Extended edition suite, on 10.6.4 if this helps.

Hi,
Could you please send your system info to me([email protected]) to have a look?
Thanks,
Ping

Office Professional Plus 2010 - Fails to Install - Error 25004 - "System error: -1073418209" - Microsoft Key Management Server

I am receiving an error when attempting to install a site license copy of Microsoft Office Professional Plus 2010. The enterprise environment that I am in is using a Microsoft Key Management Server for the authentication of all Office 2010 and Windows 7
installations. The error that I receive at the end of the installation is: "Error 25004. The product key you entered cannot be used on this machine. This is most likely due to previous Office 2010 trials being installed. (System error: -1073418209)".
I have never installed a trial of Office 2010, nor did I ever install the beta of Office 2010. I do have a copy of Microsoft Office Projects 2010 installed. Before attempting to install Office 2010, I had Office 2007 installed. I used the Upgrade option
to install 2010, instead of removing 2007 (which apparently I should have done instead) first. I have tried using the Microsoft FixIt tool to remove both Office 2007 AND Office 2010. Neither of those tools has fixed my problem. Office 2010 also does not show
up in my Add/Remove Programs list.
Any ideas on how to fix this? I do not have time to reformat until after the Holiday seasons, and need to have Office working!

Hi,
The full error text is as follows: Error 25004: The product key you entered cannot be used on this machine.
This is most likely due to previous Office 2010 trials being installed. (System error: 1073422308)
The key you are currently trying to install with, is an Office Professional Plus Trial key. A machine will allow one Professional Plus Trial key installed on it ever. Meaning you can
install a trial on a machine, used it for some time, uninstall Office. When you go back to the Microsoft website and get a new key, the second installation will be rejected with the above error message.
If this is not the situation, try to completely uninstall all the versions of the Office programs from control panel, and then use the suggestions in this KB
article to uninstall it:
How do I uninstall Office 2003, Office 2007 or Office 2010 suites if I cannot uninstall it from Control Panel?
http://support.microsoft.com/kb/290301
Then, reinstall the Office 2010 program.
Best Regards,
Sally Tang

System Error on startup

Hello Guys
I recently faced a serious problem with my Nokia N97 Mini which is that all my messages are gone and some of my sound tracks are not shown and also the images
and when i start up my Decive i get a system error Warning
Hope you guys solve my problem
PS: i can't lose my Messages because they are important and contain serious stuff for me

If the messages are gone your only option may be to contact your sim provider and see if they have records, unless of course you have backed up your phone on Nokia Suite in which case they would all be on your computer. As for crashes , the N97 Mini is very old in technology terms, but you may be able to prolong its life by doing a hard reset and installing/reinstalling the latest available software. Whatever you do , back up the phone on a computer and at least you can save whatever data is on it at the moment.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

PC Suite - System Error

Similar Messages

Maybe you are looking for