PC Suite + Windows 2000

I dont know if anyone will be able to help but i was wondering when the support for windows 2000 was removed from the pc suite application and why nokia chose to do this?
Solved!
Go to Solution.

Many large firms still use Windows 2000 and I think it is a bad mistake to drop the support for it.
I got a new E66 business phone. I installed the PC Suite which came with the phone to my business laptop which has windows 2000 professional. But I cannot upgrade the E66 by using this PC Suite because it is not supported on this operating system.
Every time I start my laptop I get a message that PC Suite has updates availble. After downloading the update it end because this operating system is not supported.
From the net I can find PC Suite versions 7.0.7.0 and 7.0.8.2 which are claimed to support Windows 2000. After downloading these 34 meg packets the installation ends to a message "this operating system is not supported".
This sucks.

Similar Messages

Windows 2000 and Nokia Cable Drivers and PC Suite

Appears Nokia does not support Windows 2k. Even though their web page states the USB Cable CA-101 driver, Nokia_Connectivity_Cable_Driver_rel_7_0_2_0_eng.msi, per their line "Nokia Cable Driver for Windows 2000, XP and Vista" on the web page says so. frustrating. Already aware that PC Suite version 7 is not supported in Win2k.
Is there a driver out there for the USB Cable CA-101 that will connect to the phone running Windows 2000? and allow at least the sd memory card be accessed for data transfer and other functions? thank you.
phone: 5610 XpressMusic
OS: Win2k service pack 4

Hi exergonico,
Which device are you using? Do you have CD that came along with your device? Could you please Search(Google) for Nokia PC Suite 6.85 or 6.86 nokia pc suite version and install on your pc to check this issue?

Nokia 6085, PC Suite and Windows 2000

I can't find the PC Suite version that will work with my phone and Windows 2000. Can someone point me to where it is so I can download it please?

Active_Lad wrote:
I have a trusty 6600 (that neither slides nor folds!) but find that I can't use the normal PC Suite that is Win7 compatible; I must use a device-specific version. However, the device specific version doesn't support Windows 7. So I am stuck. Is there a workaround to either force the device-specific version to work on Win7 of get the 6600 to work with the normal PC Suite?
Sure you can. Install in XP compatibility mode as admin.
http://europe.nokia.com/support/product-support/nokia-6600/software/pc-suite#
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Sendmail on linux and oracle colloboration suite on windows 2000

Hello
I am new to Oracle collaboration suite .We just want to know ,how we can implement sendmail on linux server on a seperate machine and Oracle collaboration suite on windows 2000 on a different machine.Whether it is possible or not if yes then what are the steps to be taken for this,I mean how we can go for it.
Thanks in advance.

Hi Maddie,
=> Phsyical DataGuard supports different platforms, but not different versions. So no option.
=> Logical Standby => while supporting different versions of database, it hat platform restrictions. So especially with 10g is not an option as well
=> GoldenGate is probably the way to go, but unfortunately not a cost free option. But would ideally support what you expect.
=> Streams might be possible as well...
Regards
Sebastian

Oracle BI Suite 10.1.3.2.0 does not install on Windows 2000

hi all,
I downloaded the two zip files from Oracle site and extracted on d:\biee.
I launched the setup.exe program under d:\orabiee\Windows\Server\Oracle_Business_Intelligence.
I specified the Complete installation and after creating the OracleBI folder, the installation hungs without any message.
I checked out the install.log file and I found this entry:
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: C:\orabiee\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=3
     at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
     at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
     at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
     at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
     at java.lang.Thread.run(Unknown Source)
As a matter of fact, the C:\orabiee\OracleBI\oc4j_bi\bin folder does not exist (and, of course neither the oc4j.cmd program).
Is there any path/workaround?
Thanx in advance
Viking

Hi Viking
First things first. Here are some things to consider:
1. If using Windows 2000, you need to be using Windows 2000 Professional with SP4.
2. You should not have any other Oracle software running during this install.
3. You also not have ORACLE_HOME, TNS_ADMIN or any of the other Oracle environment variables set.
4. You need to be a local administrator on the machine.
5. You should not have a firewall enabled.
6. You need to have a fully qualified domain name (FQDN) set for the machine.
7. The FQDN should be set in the HOSTS file which you can find in c:\windows\system32\drivers\etc
8. You need to check the certification matrix for 10.1.3.2.0 and make sure it is available for Windows 2000 and that there are no other prerequisites?
Does any of this help?
Regards
Michael

How to install Developer 10g suite on windows 2000

Hello
I downloaded the two files namely ds_windows_x86_101202_disk1 and
ds_windows_x86_101202_disk2.
When I try to install these after extracting to one temp folder and when I run the setup
on windows 2000 OS, I am always getting the the error insert disk 1 or specify the location of the product .
Please suggest how to proceed.
Also if I extract the above files can I proceed with that or are there are any additional files to be extracted. I fact I went through all the files and folders and whereever there was archive files I have extracted them.
I need urgent help to install these files.
Thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rajesh at [email protected]:
I am trying to install Oracle 8 Enterprose on
Windows 2000 , but I am geting OS Error
at the beginging of the installation.
Does anybody knows whether I can install
Oracle on Windows 2000?<HR></BLOCKQUOTE>
Hi Rajesh borikar,
I encounter similar problem as you. If you have any clues, please let me know too..thanks
regards
Andrew
null

Oracle 8.1.7 for Unix and Windows 2000 Active Directory

Is it possible to integrate the users and passwords of an Oracle Database running on Solaris with the users and passwords defined in a Windows 2000 Active Directory? What are the requirements and the necesary steps?
I've read the documentation and it shows how to do it if you install Oracle in a Windows 2000 Server, but it does not mention about installing it in any kind of Unix.

You should consider to base your firm security and central user repository on REALLY SECURE and ROBUST product technology. Not on Windows 2000 Active Directory. Win2K AD is known to be slow and insecure. If you have Oracle on Solaris your data is secure and next step is to move user accounts to real user repository. It may be one of well-known LDAP servers. Try to read some materials on CERT Coordination Center (http://www.cert.org) which describe LDAP servers. After this you can choose the server which best suite your needs.

Oracle 8i and Windows 2000 - ODBC issue

Oracle ODBC Test will not connect to a DSN that worked in Windows NT 4.0. After upgrading to Windows 2000, my ODBC stuff is hammered. I have many applications that rely on these DSN's. Does anybody have any suggestions? Please send comments/suggestions to [email protected] HELP! PLEASE!

Hello:
I need the following product:
ORACLE COM.DOT this suit include:
Oracle 8i, oracle webdb, oracle bronze support and others.
Please, somebody can tell me which is de part number or what package include all this aplicattions.
Thanks and i4m waiting for an answer.
null

LOGIN PROBLEM THROUGH APPS SERVICE 11.5.9 ON WINDOWS 2000

HI
I HAVE SUCCESSFULLY INSTALLED ORACLE APPS 11.5.9 ( ALL THE TESTS WERE PASSED SUCCESSFULLY) ON WINDOWS 2000 SERVER , NOW I AM ABLE TO LOGON TO THE APPLICATION USING FORMS , BUT WHEN I M TRYING TO CONNECT THROUGH APPLICATION SERVICE IT IS GIVING AN ERROR BUT IF YOU CHECKED THE DETAILS OF THE ERROR , THERE IS NOTHING . PLS ADVISE WHAT COULD BE THE REASON.
THX/RDS
DARA

I have the same issue while installing 11.5.9 on my test machine.
Installation is fine. No errors. But while trying to login to oracle e-business suite as abcd\pqr, it gives error saying Authentication failed. It is perfect because I have never created user abcd.
But when trying to connect as sysadmin\syadmin it says
"You have encountered an unexpected error. Please contact the System Adminstrator for assistance. Click here for exception details." When I cleck on the link nothing is listed in Exception Details.
Your input will be highly appriciated...
Thanks,

Help Windows 2000 and Zen4GB is

Well, I goofed, purchased a (non-returnable) refurbished 4GB Zen and have Windows 2000. I read the specs and that page did not list the OS needed. I am certain many others have had this problem as 2000 is pretty common, and don't know why Creative hasn't handled this software issue, does anyone know how to hook up the Zen 4GB with Windows 2000?

Winamp is a program similar to iTunes that helps you to manage your music on your computer and then sync the music to your device. You can download it for free (just Google Winamp) or there is a Pro version for a small one-off payment. It supports Windows 2000. There's a wealth of information on the website, including a Help section, FAQ and a User Forum. As the program is open-source, it supports plug-ins which modify the software to suit a user's needs - you may be able to find a plug-in in order to use your Zen with it. I use it as I personally prefer it to Creative's own offering and find it'sa powerful but easy program to use.
MediaMonkey is a similar program although I haven't used it personally. Google it and you can download it for free. It has the plug-ins already installed to be able to detect and sync most MP3 players. It is supports Windows 2000 (in fact it supports Windows 95!).
Hope this helps!

Reports Builder doesn't start in Windows 2000

Hi all,
i've installed Oracle Developer Suite 10g on Windows 2000 Pro (SP4). Installation procedure ends succesfully, but when i try to launch Reports Builder the process rwbuilder hangs up.
Someone can help me?
Thanks. Matteo.

Hi Jon, thank you for your support.
I've stopped my scan virus, but the process rwbuilder still hangs up...and my path name doesn't contains any spaces!
Other ideas?
I've installed Developer Suite 10g and Enterprise Manager 10g in the same machine, but in different Oracle Home and the only Reports Builder doesn't work...the other applications (SqlPlus, Forms Builder etc..) works fine!
Regards, Matteo.

"Program Error" (aka. Dr. Watson) on Windows 2000

I took one old computer with NT4, updated it successfully to Windows 2000, installed Service Pack 4 and IE 6.01 + several security updates.
However, PC Suite 6.82.21 does not work at all. The "Get Connected" window shown after the installation disappears immediately, and trying to start any PC Suite application (but Music Manager) generates a "Program Error". E.g.
LaunchApplicati.exe has generated errors and will be closed by Windows. You will need to restart the program.
I have tried to uninstall and clean the PC with the PC Suite cleaner several times (all possible options tried) but without any difference. I also tested PC Suite 5.8, and it generates program errors, too (but its icon appeared in the status area before crash, 6.82 failed to run even so far).
Although it is an old computer, the PC Suite 6.82 system requirements are fulfilled easily:
Available hard disk space: 200 MB (file size approx 25 MB) (yes)
Operating system: Windows 2000 (service pack 4) (yes)
Connection methods: USB cable, infrared, or Bluetooth (USB cable, yes)
Has anyone had a similar problem with the PC Suite? - I cannot find any other reason for the problem than that the PC Suite has some undocumented extra system requirements that are not fullfileed on that old computer. But what?
Edit: I tried to monitor the LaunchApplication with RegMon and FileMon but I could not find anything that could cause the crash. The logs are attached...Message Edited by panuworld2 on 07-Dec-2006
04:42 PM
Attachments:
Filemon2.LOG ‏166 KB
Regmon2.LOG ‏243 KB

I have been mailing with Nokia support for months already if they should indicate in their system requirements that some specific processor type or speed is required for PC suite.
Currently Nokia support continues to claim that the reason for the crashes is "lacking resouces" on my computer. I cannot believe it because the same computer runs MS Office and SeaMonkey well, with reasonable speed. - What is the quality of PC Suite if it _crashes_ fatally if e.g. the processor speed is too slow? - And why do not they then tell that it will not work on computers slower that ?
I looked the crash dump with windbg and it tells the following:
(114.448): Illegal instruction - code c000001d (!!! second chance !!!)
eax=038a0020 ebx=000221aa ecx=00000000 edx=00090000 esi=fff70000 edi=00120000
eip=0041f13a esp=0012e014 ebp=f9050407 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000206
*** WARNING: Unable to verify checksum for LaunchApplication.exe
*** ERROR: Module load completed but symbols could not be loaded for LaunchApplication.exe
LaunchApplication+0x1f13a:
0041f13a 0f6e4c2414 movd mm1,dword ptr [esp+14h] ss:0023:0012e028=f6d8e0f5
The crash reason is illegal instruction. LaunchApplication is trying to execute an MMX command (movd mm1) on my non-MMX processor!! Why Nokia does not inform that an MMX-capable processor is required for PC Suite?
I cannot understand that "the lack of resources" of my computer causes PC Suite to use MMX commands which crashes my non-MMX computer. Can anyone explain this relation between MMX-commands contained in PC Suite and the speed (not processor type) of my computer?
(I emphasize that according to Nokia, the reason is "the lack of resources" of the computer, NOT the processor type (non-MMX).)

Windows 2000 Server Cluster Restars

Hi,
Last friday one of server's cluster restarted without any logical reason. We found a minidump and a dr Watson log. From the user dump we have this information:
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [E:\6 marzo error backup\user.dmp]
User Dump File: Only application data is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 2000 Version 2195 UP Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer SingleUserTS
Machine Name:
Debug session time: Sat Mar 7 01:14:08.144 2015 (UTC + 1:00)
System Uptime: 127 days 11:06:13.061
Process Uptime: not available
The call to LoadLibrary(ntsdexts) failed, Win32 error 0n2
    "El sistema no puede encontrar el archivo especificado."
Please check your debugger configuration and/or network access.
(688.bbc): Access violation - code c0000005 (!!! second chance !!!)
eax=4da59480 ebx=4db2c148 ecx=00000000 edx=784afca0 esi=4e065640 edi=4db2c0f8
eip=7846f113 esp=0348fdb8 ebp=0348fdec iopl=0         nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000             efl=00000202
ntdll!RtlDeleteCriticalSection+0x61:
7846f113 8901            mov     dword ptr [ecx],eax ds:0023:00000000=????????
0:026> !analyze -v
*                        Exception Analysis
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: ntdll!_PEB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!IMAGE_NT_HEADERS32                         ***
*** ERROR: Symbol file could not be found. Defaulted to export symbols for Rtvscan.exe -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for GEDataStore.dll -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for SRTSP32.DLL -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for vpmsece.dll -
*** ERROR: Symbol file could not be found. Defaulted to export symbols for SymProtectStorage.dll -
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_CONTEXT                                   ***
The call to LoadLibrary(ntsdexts) failed, Win32 error 0n2
    "El sistema no puede encontrar el archivo especificado."
Please check your debugger configuration and/or network access.
The call to LoadLibrary(ntsdexts) failed, Win32 error 0n2
    "El sistema no puede encontrar el archivo especificado."
Please check your debugger configuration and/or network access.
The call to LoadLibrary(ntsdexts) failed, Win32 error 0n2
    "El sistema no puede encontrar el archivo especificado."
Please check your debugger configuration and/or network access.
GetUrlPageData2 (WinHttp) failed: 12007.
FAULTING_IP:
ntdll!RtlDeleteCriticalSection+61
7846f113 8901            mov     dword ptr [ecx],eax
EXCEPTION_RECORD: ffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 7846f113 (ntdll!RtlDeleteCriticalSection+0x00000061)
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 00000001
   Parameter[1]: 00000000
Attempt to write to address 00000000
CONTEXT: 00000000 -- (.cxr 0x0;r)
eax=4da59480 ebx=4db2c148 ecx=00000000 edx=784afca0 esi=4e065640 edi=4db2c0f8
eip=7846f113 esp=0348fdb8 ebp=0348fdec iopl=0         nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000             efl=00000202
ntdll!RtlDeleteCriticalSection+0x61:
7846f113 8901            mov     dword ptr [ecx],eax ds:0023:00000000=????????
FAULTING_THREAD: 00000bbc
DEFAULT_BUCKET_ID: NULL_POINTER_WRITE
PROCESS_NAME: Rtvscan.exe
ERROR_CODE: (NTSTATUS) 0xc0000005 - La instrucci n en 0x%08lx hace referencia a la memoria en 0x%08lx. La memoria no se pudo %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - La instrucci n en 0x%08lx hace referencia a la memoria en 0x%08lx. La memoria no se pudo %s.
EXCEPTION_PARAMETER1: 00000001
EXCEPTION_PARAMETER2: 00000000
WRITE_ADDRESS: 00000000
FOLLOWUP_IP:
RPCRT4!MUTEX::Free+c
77142496 c3              ret
APP: rtvscan.exe
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 77142496 to 7846f113
PRIMARY_PROBLEM_CLASS: NULL_POINTER_WRITE
BUGCHECK_STR: APPLICATION_FAULT_NULL_POINTER_WRITE
STACK_TEXT:
0348fdb8 7846f113 ntdll!RtlDeleteCriticalSection+0x61
0348fdf4 77142496 rpcrt4!MUTEX::Free+0xc
0348fdfc 77135a63 rpcrt4!LRPC_CASSOCIATION::~LRPC_CASSOCIATION+0xe8
0348fe14 77135973 rpcrt4!LRPC_CASSOCIATION::`vector deleting destructor'+0x8
0348fe1c 77142978 rpcrt4!REFERENCED_OBJECT::FreeObject+0xb
0348fe24 771422b0 rpcrt4!REFERENCED_OBJECT::RemoveReference+0x18
0348fe2c 771358be rpcrt4!LRPC_CASSOCIATION::RemoveBindingHandleReference+0x37
0348fe34 77135815 rpcrt4!LRPC_BINDING_HANDLE::~LRPC_BINDING_HANDLE+0x42
0348fe4c 771357b8 rpcrt4!LRPC_BINDING_HANDLE::`vector deleting destructor'+0x8
0348fe54 771357a4 rpcrt4!LRPC_BINDING_HANDLE::BindingFree+0x32
0348fe64 77142caa rpcrt4!RpcBindingFree+0x4e
0348fe74 7cf460e6 ole32!CChannelHandle::~CChannelHandle+0xf
0348fe80 7cf460c7 ole32!CChannelHandle::Release+0x1c
0348fe88 7ce7cc6c ole32!OXIDEntry::ExpireEntry+0x1d
0348fe94 7ce8fca2 ole32!COXIDTable::FreeCleanupEntries+0x6e
0348ff10 7ceb5f93 ole32!COXIDTable::GetOxidsToRemove+0xce
0348ff2c 7ceb5e6e ole32!CROIDTable::ClientBulkUpdateOIDWithPingServer+0x1a5
0348ff90 7ceb5d74 ole32!CROIDTable::WorkerThreadLoop+0x37
0348ff98 7ce97f2c ole32!CRpcThread::WorkerLoop+0x22
0348ffb0 7ce97f8b ole32!CRpcThreadCache::RpcWorkerThreadEntry+0x1a
0348ffbc 7945b388 kernel32!BaseThreadStart+0x52
STACK_COMMAND: .ecxr ; kb ; dps 348fdb8 ; kb
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: rpcrt4!MUTEX::Free+c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RPCRT4
IMAGE_NAME: RPCRT4.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 42a06799
FAILURE_BUCKET_ID: NULL_POINTER_WRITE_c0000005_RPCRT4.dll!MUTEX::Free
BUCKET_ID: APPLICATION_FAULT_NULL_POINTER_WRITE_rpcrt4!MUTEX::Free+c
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:null_pointer_write_c0000005_rpcrt4.dll!mutex::free
FAILURE_ID_HASH: {73dc9e1e-67d1-8f64-5cc1-10543104d0b2}
Followup: MachineOwner
Could anybody help us to understand what happened? We have Symantec 11 Client in this server.
Best Regards and thanks in advance.

I see that the process
Rtvscan.exe is highlighted in the dump. This belongs to Symantec: http://www.neuber.com/taskmanager/process/rtvscan.exe.html
Also, I see multiple access violation errors.
Please note that Windows Server 2000 is no longer supported by Microsoft. However, this OS version seems to be supported for the Symantec Version you use. If the problem gets reproduced again then I would recommend removing Symantec AV and trying again.
If this fixes the issue then you might want to contact Symantec Support for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

N86 and Windows 2000

My new N86 8MP came with a CD with OVI Suite software ( a Help file implies version 1.1). This says it is compatible with Windows XP (SP2) or later. My own OS is Windows 2000 Pro.
Is there any known software I can download that will permit info exchange and compatibility between the N86 and Microsoft's Windows 2000? Am I best to try to sell the N86 and try another phone?

Leonard1900 wrote:
Am I best to try to sell the N86 and try another phone?
Surely the most sensible option would be to update your computer to an OS that was released in this century? You'll struggle to find a modern phone that still has full support for that old OS!
Time moves on and eventually support has to end for old products.
Even with an unsupported OS you can still transfer files to the phone using bluetooth (if your PC has bluetooth). You could also try online services for managing your phone such as ovi.com.

Sharepoint access for Windows XP & Windows 2000 workstations

We just had an outside vendor upgrade our MAC environment. A 10.4.3 X server was installed and a sharepoint setup for our marketing department. All of the MACs and Windows XP workstations can access the sharepoint without any issues but if a Windows 2000 workstation attempts to access the sharepoint they are prompted to authenticate but there domain UserID & Password do not work. If the users go to a Windows XP workstation they can access the sharepoint properly. What do I need to configure to allow our Windows 2000 workstations to connect properly to the X Server sharepoint?
Thanks
Various Mac OS X (10.4.3) AD Network, 1800 PC Clients, 1 OS X Server and 23 OS X Clients

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

PC Suite + Windows 2000

Similar Messages

Maybe you are looking for