PC Sync problem N70 Lotus Notes 7

Hi to all,
I cannot sync my N70 and Lotus Notes 7. I start sync and it connect but the window of PC Sync disappear and on the phone is shown Synchronising but after a while I get a message that it is timed out.
Here are the details.
Please help!
Thanks...
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: Hrvatski
Input language: Hrvatski
Nokia PC Suite:
Version 6.82.22.0
Language: English
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Version 6.43.9.0
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 3200
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180

Hi Darryl,
I think that your only option here is to use PC Suite 6.80.22 which does support Lotus Notes 7 and connect your phone using a Bluetooth connection which is supported by this version of PC Suite.
It's a very old phone so I doubt later versions of PC Suite are going to provide support for the DLR-3P cable if the current versions don't support it anymore.
PC Suite 6.80.22 should at least allow you to backup and synchronise your phone if you use the Bluetooth connection.

Similar Messages

Sync problems with Lotus

Hi,
I am using a Nokia 3109c with a XP SP2 Computer, connected via USB cable. I installed PC Suite 2 years ago (do not now the old version number) and everything was OK, included the sync with my Lotus Notes calendar.
Now I updated to version 7.1.30.9
PC Suite found the phone and it can import and send everything. But when I try to sync (with the old options) the process starts and end with a warning in the output "PCSync-Information", that the phone has not reacted and that I should ensure that the phone is ready (but it is ready)
I removed the program and reinstalled it, with a lot of restarts, but the problem is the same.
I did not found the problem in the discussion here. Could someone help me?
Ch.B.

I have 6650d and PC Suite 7.1.40.6 I could not sync to Lotus calendar, (got message about make sure phone is in idle mode). Once I changed the profile to take the phone offline, then I could sync Lotus calendar.

Sync calendar w/ Lotus Notes?

At work I have to use Lotus Notes. I have installed HTC Sync but the only option to sync is w/ Outlook. How can I sync it with Lotus Notes 8.5.1?

Are you using Lotus notes through an exchange account?
Check out Lotus Notes Traveler app for Android on the Lotus Notes website.

Problem syncing W518A with Lotus Notes 6 Calendar - PC Suite

When syncing my W518A with Lotus Notes 6 calendar repeating meetings that are rescheduled do not change time on the phone and meetings scheduled in another time zone reflect the original time zone, not the local time zone as set by my copy of Lotus Notes. Locally created meetings and appointments work OK.
I'm using the latest download of PC Suite.
Has anyone found a solution or workaround?

I've investigated this one and this is unfortunately not possible to change.
PC Suite will read the original local timezone setting for a meeting when syncing with Lotus Notes.
Normally, when syncing with e.g. Outlook, this is not a problem since the phone with auto-adjust the displayed time to your timezone. The only "solution" to this problem is to keep in mind that the meeting will occur one hour earlier than shown in the calendar unfortunately.
Also, a re-occurring meeting can't be edited for a single event. All non-smartphones will not be able to do that. The whole event will have to be changed for the phone to understand this.
E.g. If you have a re-occurring meeting for every monday at 9AM, you cannot change one monday to 8AM and keep the rest at 9AM since the phone can't handle this.

"Read" status of e-mail will not sync wirelessly between Lotus Notes and 8520??

HI,
This is my first post and I realize that this might not be the right area to post this question but my question did not seem to fit anywhere else.
I was recently issued a BB 8520 at my new company and we work in a Lotus Notes environment and I believe it is version 7.
This is not happening to anyone else that I know of in our company but when I read an e-mail in Lotus Notes from my desktop, wireless sync will not mark it read on my Blackberry. Also when I read an e-mail on my BB, it will not mark it read in Lotus Notes. However if I delete an e-mail in Lotus Notes, it will delete it from my BB via wireless sync. Finally, when my BB is attached to my desktop via USB, and I do a manual sync from Blackberry Desktop Manager, it will sync the "read" status of my e-mails between Lotus Notes and my BB.
So I guess my question is why are most sync functions working via wireless sync between my e-mail in Lotus Notes and my BB, but not the "read" status of an e-mail? And I know that it works for other users in our company so it's really bothering as it is a whipping to have check e-mails that are still marked as unread (in both Lotus Notes and my BB) when I have already read them.
Thank you and I would really appreciate any help or information that I could provide to our IT Admin at work to help him solve my problem.
Thank you,
Matt

Hi and welcome to the forums!
Looks like you posted in the right device forum and your post is very clear!
First open the main message queue, menu key options, email reconciliation, is wireless reconcile on?
Some "light reading" that may address the issue as well is attached below.
Let us know how it goes!
Thanks,
Bifocals
Unread marks synchronization is inconsistent between BlackBerry smartphone and IBM Lotus Notes
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

PC Suite will not sync Calendar with Lotus Notes 8...

I am running PC Suite 7.1.18.0 on Windows XP SP2 and attempting to sync between Lotus Notes V8.5 and my E51, which reports: 300.34.56, 11-12-2008, RM-244 Nokia E51 (06).
The syncing worked more or less entirely satisfactorily in the past. However at some point it began to fail and now I am completely unable to sync my calendar with the phone. (Contacts sync still works but only when Calendar sync is disabled.)
The Sync application shows it's reading some records (20-25 right now) but then stops and logs two messages:
PC Sync Information. PC Sync has encountered a problem and has terminated the synchronisation.
The Synchronisation has been Aborted! The synchronisation has been aborted.
It makes no difference whether I use USB or Bluetooth. I think I've tried just about everything that I've seen suggested in various postings on this topic. For example, I have completely uninstalled and reinstalled PC Suite, I've cleared out the stored data, I've created new sync profiles, I've tried different sync horizons, I've updated the phone firmware, I've even tried different Notes mail databases -- nothing seems to re-enable the syncing.
I'm guessing that there is some entry in my calendar that is causing the sync program to barf. If I could discover what it is that's causing the problem, I could probably fix it.
Is there any way to get some more verbose logging or to find any additional detail to help diagnose what is causing this problem?
Solved!
Go to Solution.

Hi Ricardo,
I couldn't go that far yet. Called the tech support in USA (I found out this forum is Europe) and they told me that my e71 is from Malaysia and my update software is from USA. Not know if this where the issues are. I delete all the entries in my calendar and try sync the calendar again. It stops right at the same place. Now my entries are totally gone.
So I use the Malaysia PC Suite update (removed all Nokia related softwares in my laptop) and installed the Malaysia update version. Still stop right at the same place which is "Microsoft" "outlook0.ost" file saying that I do not have the permission.
I noticed that in my "cellphone memory" there was a "Data" folder with a folder "{66de788c-2956-11db-962d-00e08161165f}Relocated". What is this? Could it be the cause of sync problems?
The USA tech support suggested that I format the "cellphone memory" using " *#7370# ". What will be consequence after format it?
johlee2

Smooth switch from Pylon Conduits to XTNDConnect PC, to sync Palm with Lotus Notes

I've used Pylon Conduits (software purchased from sybase.com) for years, to sync my Palm Zire 72 (Palm OS 5.0) with Lotus Notes at work. I also used HotSync to sync the Palm with my home computer's Palm Desktop. Essentially a 3-way calendar sync, very convenient!
There was a documented Pylon problem with recurring entries turning into duplicate entries, and there were occasions where I'd delete an entry from one calendar that didn't stay deleted after sync'ing. However, all in all, my imperfect 3-way sync was worthwhile. At least the entries erred on the side of caution--better too many than not enough.
Sadly, I learned, Pylon issued an "end of life" notice earlier this year. After my office pushed down a patch that messed with Pylon, I was recently forced to find other conduit software. EasySync was recommended to me, but I can't remember what flaw prevented my using it--maybe it wouldn't sync Lotus Notes recurring entries at all? Can't remember.
Anyway, with low expectations, I tried XTNDConnect PC software (another sybase.com product, $60, to replace Pylon). For what I use it for (calendar, to-do, memos), XTNDConnect PC is marvelous, better than Pylon Conduits! Simple, yet powerful. I guess it's pronounced "extendConnect PC," but I will ignore the cumbersome name. Its conduits are not just for Palm and not just for Lotus Notes either, but when you tell it what you're using it for, it is so friendly as to show only your relevant options.
XTNDConnect PC handles recurring entries nicely. And it addresses how Contacts fields differ in Palm vs. Lotus Notes: It shows how/which fields are mapped by default, plus it allows you to customize field mapping for all Contacts fields.
One change I had to figure out was that while Pylon sync'd Palm's "Memos" with Lotus Notes email "Drafts" folder, XTND instead syncs Palm's "Memos" with a Lotus Notes "Journal" database (which I had to establish and bookmark on my work computer). No big, once I figured out what was going on. I got some help from XTNDConnect PC customer service--free by email, and responsive within hours.
I saw in perhaps old specs for XTND that for email, you have to install some additional software (to supplement XTND) if you're syncing a Palm using OS higher than 3.0. However, I can't say anything more about this because I don't use the email conduit.
--Lisa
Post relates to: Zire 72

Lisa,
Welcome to the Palm forums and thanks for that great feedback!
Alan G
Post relates to: Treo 755p (Sprint)

Sync Palm With Lotus Notes 8.5.1 Using EasySync 4.2.7: Calendar does not show location

I have a Garmin iQue3600, which is basically a Palm III with a GPS built in. I could sync my Outlook 2007 contacts and calendar flawlessly. (Palm Sync 6.0.1, Palm Desktop 4.1.4). Company was purchased, now we are using Lotus Notes 8.5.1. No native Palm support, so I tried EasySync 4.2.7. This actually works pretty well, except that the calendar entries do not sync the location of the meeting; this is rather important to me.
Is there a setting somewhere that can fix this? Years ago I used Intellisync to do this, but that company is gone now.
Someone suggested Companionlink, but the on-line reviews for that product are pretty bad.
Thank you.

Lisa,
Welcome to the Palm forums and thanks for that great feedback!
Alan G
Post relates to: Treo 755p (Sprint)

Problem with Lotus Notes portlet

Hi all, i have another problem with the latest Lotus Notes portlet (version 9.0.4.0.0_05062003). I have installed and configured the portlet and the domino server to be used with the Basic Authentication. I followed all the steps in the installation document and everything seems OK. However when i include these portlets in a page, some links (not all) doesn't work, in example: the new contact link. Any of these links opens a new browser window. This window displays that i have successfully configured Lotus Notes External Application, but i can't do anything to perform the action, as to add the new contact. Does anybody have the same problem?, it's a bug? or i have committed an error?
Finally, if i configure the portlet and the domino server to be used with session based Authentication i have the same problem that Remy Vanderplaetsen has posted.
Any help will be very appreciated.
Thanks a lot!

I guess this problem is again with the same portal issue. You need to apply the patch as mentioned in the FAQ.html document for LotusNotes. Please refer this document on how to get and apply the portal patches so that it could work.

SUP sync problem: Category products not found on WSUS

Hello,
Updates stopped working suddenly for clients, and the clients reported back with message: "Client check passed/Active".
I can't say much about it because I have to be honest, I didn't do much troubleshooting.
I went straight to re-configuration of SUP/WSUS.
So I removed the SUP CM role, and WSUS and re-installed everything again.
I did this several times now and followed similar procedures, but slightly different.
Basically:
Remove SUP
Remove WSUS
Restart
Install WSUS
Install the two famous updates
Restart
Add SUP role
Environment (one machine):
Server: 2008 R2
SCCM: 2012 SP1 - 5.0.7804.1000
WSUS 3.0 SP2 with both KB's
Syncing doesn't work.
From the wsyncmgr.log I'd say that SCCM is unable to communicate with WSUS.
From the wcm.log I'd think that Category Products are enabled on SCCM which cannot be found on WSUS, which I find a strange reason to block the whole Updating process but who am I to critisize. :-)
The problem is that I can't find these products in SCCM, let alone disable.
I really hope someone can help me out with this as this is starting to drive me crazy.
Also tried to run the WSUS configuration wizard partially until the products but that didn't help either.
Each time I restart the whole configuration, when I add the SUP role it seems to remember my settings. Is there a proper way to completely remove SUP?
WCM.log:
Category Product:70cfad70-6629-b54b-5819-c809a605515e (Adobe Flash Player) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Category Product:e1d507be-497c-d8fd-61d7-b0d93ee399ca (Adobe Reader) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Subscription contains categories unknown to WSUS.
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
WSYNCMGR.log
Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync
SMS_WSUS_SYNC_MANAGER 13/12/2013 15:37:12
5660 (0x161C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=SVCMSS001.mobilebelgium.be SITE=PS1 PID=5216 TID=5660 GMTDATE=Fri Dec 13 14:37:12.547 2013 ISTR0="CWSyncMgr::DoSync" ISTR1="WSUS server not
configured. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 13/12/2013 15:37:12
5660 (0x161C)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
13/12/2013 15:37:12 5660 (0x161C)

After 3 days of screwing around and one afternoon being sure it's related to the two category updates, I have been able to find a way to fix this situation. Not sure if it's the correct way, but it IS a way.
I'd still be grateful if anyone can explain how it could happen, since this fix is not really supported I guess.
But here is what was wrong.
At a certain point in those 3 days I was getting following error in WSYNCMGR.log:
Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync
SMS_WSUS_SYNC_MANAGER
08/12/2013 23:40:04 4720 (0x1270)
I went into the DB, in the CI_UpdateSources table and changed the value for IsExprired from True to False.
Then I got the error from my original post:
Sync failed: WSUS server not configured. Please refer to WCM.log
for configuration error details.. Source: CWSyncMgr::DoSync
I made sure all category products were disabled (I think they were at this time) and went in the DB to the table CI_UpdateCategorySubscription and found that there were two rows with IsSubscribed set to True. What a coïnsidence the error in WCM.log gave
two category products thta could not be found in WSUS.
I went ahead and set them to False and there you go, sync is doing fine now.
Now I'm going to enable some products and check if sync is still ok, and ultimately check if clients receive the updates.
Questions are:
How could this UpdteSource be flagged as Expired?
How are those two Subscriptions enabled?
The SUP and WSUS have been removed and re-installed at least 3 times or so.
Cheers, hope this can help someone else!

Problems with Lotus Notes and AcroPro9.1 collaboration - tracker, email,etc

Hello all -
I have been trying to resolve this for a few days, and it's gotten worse, not better. I've searched forums and blogs - no luck so far.
I am in a corporate Lotus Notes environment, Win XP sp2, AcrobatPro 9.1, reader or pro 9.1 deployed at users in question. With Lotus Notes 8.x open and running, cannot get the collaboration features to work. I get "Lotus notes is not responding. Please make sure it is not offline and try again" when Notes is up and running. Other issues are the good old duplicate email addresses in the to: area, email address and a lot of other text that should actually be in the body of the email appearing in the to: area, etc.
I am trying to push for more automation using Acrobat in my environments, and this is rapidly becoming a serious show-stopper.
Adobe Team, ideas please?
Thx.

Over a year later... Did you ever resolve this issue? I'm having the same problem since our upgrade to
Acrobat 9.
Please let me know if you have a solution!

Mailto: problem in Lotus notes!!

I have written the following code on the onPress event of a
button.
Code:
var recipient:String;
var subject:String;
recipient = "[email protected]";
subject = "Help mail";
getURL ("mailto:" +recipient+ "&subject=" + subject)
The code is working fine for MS Outlook, but not for Lotus
notes.
To: [email protected]&subject=Help mail
is getting generated instead of
To: [email protected]
Subject: Help mail
Works fine for Outlook. Can anyone help?

hi,
As far as i think u have to specify the Virtual directory on the Domino HTTP server on which the LDS-D components are installed. U have to specify the path.
pliz check out the link..
http://help.sap.com/saphelp_nw2004s/helpdata/en/ee/bfd32987dfb848b114c8f3ead32c5c/frameset.htm
regards
mujjammil

CKEditor copy-paste problem from Lotus Notes

I use CKEditor in my web applications. When I want to copy a content from Lotus Notes which contains images CKEditor only accepts the image in my copy content and it is in inverted version. But when I repeat same operation in Google Chrome it accepts the text from content and this is acceptable for me. I am sending screen-shots of my issue. The content is the mail that you sent me about confirmation of my Firefox Help question. The copy content is the same for both screen-shots.
How can I handle this in Firefox?
Firefox version : 36.0
Operating System : Windows 7
Installed plugins :
* Adobe PDF Plug-In For Firefox and Netscape 11.0.10
* Creative Cloud Desktop Plugin.v_2_0_0_0
* AlternaTIFF v2.0.6
* Box Edit
* Google Update
* ImageCapture Suite Plugin Trial
* Intel web components for Intel® Identity Protection Technology
* Intel web components updater - Installs and updates the Intel web components
* NPRuntime Script Plug-in Library for Java(TM) Deploy
* Next Generation Java Plug-in 11.31.2 for Mozilla browsers
* Document scanning browser plugin
* NVIDIA 3D Vision Streaming plugin for Mozilla browsers
* NVIDIA 3D Vision plugin for Mozilla browsers
* Notes embedded control plugin for Mozilla
* NPWLPG
* Shockwave Flash 17.0 r0
* 5.1.30514.0
* Unity Player 4.6.3f1

Unfortunately I do not know much about this tool, however I did find a few options with a little research:
It looks like there is an option to paste as plain text with the editor:
*Source:[http://ckeditor.com/forums/CKEditor/Paste-code-without-formating-HTML]
As well as an advanced filter:
*[http://docs.ckeditor.com/#!/guide/dev_advanced_content_filter]

ITunes sync problem: file could not be read or written

I am running itunes 10.5.2 on OSX 10.7.2 on a 2.53 GHz Intel Core 2 Duo Macbook
A week ago i did a so called "clean install" on my Mac, making sure to back everything up on one external drive, and clone the disk on another before beggining. I started with snow leopard and then installed the upgrade from the app store. I then reinstalled all of my software, loaded my photos, setup my preferences and devices, and finally directed itunes to the media folder on my external drive.
I had been using the external drive for itunes for a couple of years: on the previous system and even my previous desktop, with no problems whatsoever.
All my songs apps etc. showed up and there seemed to be no issue.
Then I tried to sync my iphone 4s and it started off okay, but about halfway through the message "could not sync ___ song to iphone because the file could not be read or written". When i located the song in question it was where it should be and even played properly in itunes. The second try would bring about the same error only with a different song. This went on several times before I realized something was really wrong.
I made sure to change the permissions for all itunes folders, music folders, even the external drive itself to have read & write permissions for all fields, and checked the box to include all internal files. I also tried resetting my iphone, syncing through another usb port, and running permissions checks on the main drive.
Thinking it could be a broken hard drive, I tried moving my aperture folder to the internal drive and all 30 GB transfered no problem. But when I tried to move the itunes folder to another drive, it stopped midway through and the finder gave me "error -36" saying that some song could not be transfered because "the file could not be read or written".
In case it helps I have included the Console log from on of my attempts to syc.
Any ideas? Thanks for your time and effort in helping.
Jan 9 16:49:23 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:49:53: --- last message repeated 1 time ---
Jan 9 16:49:57 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:55:03 Rolf-Lufts-MacBook-Pro kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed
Jan 9 16:55:03 Rolf-Lufts-MacBook-Pro kernel[0]: USBMSC Identifier (non-unique): 57442D574D41565530363531313730 0x1058 0x1003 0x175
Jan 9 16:55:23 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:55:53: --- last message repeated 1 time ---
Jan 9 16:55:56 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:56:26: --- last message repeated 2 times ---
Jan 9 16:56:52 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:57:26 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:57:56: --- last message repeated 1 time ---
Jan 9 16:57:56 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:59:07 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 16:59:15 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Jan 9 16:59:39: --- last message repeated 4 times ---
Jan 9 16:59:39 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:00:23 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:00:53: --- last message repeated 1 time ---
Jan 9 17:01:23 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:06:40 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Jan 9 17:14:34 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Jan 9 17:17:18: --- last message repeated 3 times ---
Jan 9 17:17:18 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Jan 9 17:21:46 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:22:16: --- last message repeated 1 time ---
Jan 9 17:22:44 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:23:14: --- last message repeated 1 time ---
Jan 9 17:23:14 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:23:48 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:24:18: --- last message repeated 1 time ---
Jan 9 17:24:22 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:24:52: --- last message repeated 1 time ---
Jan 9 17:28:04 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:28:34: --- last message repeated 1 time ---
Jan 9 17:28:37 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:29:07: --- last message repeated 1 time ---
Jan 9 17:29:07 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Jan 9 17:29:12 Rolf-Lufts-MacBook-Pro kernel[0]: disk1s3: I/O error.
Jan 9 17:29:42: --- last message repeated 1 time ---
Jan 9 17:30:06 Rolf-Lufts-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero

I had this same message appear today when i was putting new music on my ipod touch 4th gen. The only difference is that I wasnt using an external drive. I was using the one on my computer. This is the first time i have had this problem

Outlook sync problem : calendar is not complete...

Hi all,
i have connected and synchronized my Ipod Touch with Outlook2003 SP3, under XP PRO, Itunes version 7.4. Contacts are ok, but my appointments on calendar are not all synchronized.
For example, today i have 4 meetings on Outloo, only one is present on the touch. The 2 meetings for tomorrow are all present...
I have tried to repair my pst file, but the result is the same.
Can anyone help me ?
Thank you

Finally, It WORKS !!!
I followed instructions from http://docs.info.apple.com/article.html?artnum=306666
I have removed an application (Genesys Meeting Center) that causes problems with syncing (it works for my Pocket PC but not for Itouch...). I have never seen until yesterday that new default class value for my meetings was "IPM.MeetingCenter"...
I have deleted each appointment then created same again to obtain a class "IPM.Appointment". I change also my PST file in Outlook properties (changing default value "when publicating" to IPM.Appointment).
And now it works. I can't use Genesys but i can synchronize ;-)))
Thank you for your support.

PC Sync problem N70 Lotus Notes 7

Similar Messages

Maybe you are looking for