PC to cable port of AExpress, AE wireless to internet router - possible?

After I finally got with the help of this forum my "standard" encrypted connection from itunes to my stereo via an AE working, I'd like to do following:
* Internet connected router
* One PC with itunes (attached to router), feeding music to the AE
* AE (wireless, of course connected to router) as sort of a relay station for other wireless PCs, but, more interesting, cable bound via it's ethernet port (for a non-wireless computer).
Have tried to do the setup without thinking of the ehternet port, but now my router can't find the AE (resp. the AE can't find the (encrypted) router).

Well, in the faqs I found the answer to my question in part:
Yes, it is possible, one sets up the station as a remote station and thus it works for wired clients as well.
But now the question is - how??? That is not clearly answered in the faq that I found.
I am using the AirPort Admin utility under windows.
Any tips/comments on the steps to use with this program?

Similar Messages

Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

Want to us my time capsule model A1409 as only backup. 2 TB hard drive.
Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
Have tried all of passwords can think of and none work.
Held the reset button for one second on back of capsule and do not see if anything happened.
What a conundrum.
Appreciate any help to get this working.
Thanks,
John R

I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
Mine is wiredup thus;
Eth cable from iMac to modem (not the WAN port should you have one), then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
Alan

Cable length limit on the so-called "Internet" port?

Is there a limit on the cable-length when connecting an Ethernet cable to the so-called "Internet" port on a WRT54G router?
I assume this is a standard 10/100 Ethernet port, since I am connecting this to the Ethernet port of my DSL modem. Since the Ethernet standard defines a maximum cable-length of 100 meters when connecting any 2 Ethernet devices, I should be able to use a cable up to this length when connecting 2 Linksys routers together.
Here is what I want to do:
DSL Modem-->Linksys Router-->Linksys Router
My first Linksys WRT54G router is connected to a DSL modem. I want to put a second WRT54G Linksys router in a different building, and connect them with a 100 meter Ethernet cable, connecting the remote end to the second router´s "Internet" port, and the other end into one of the first router´s available 10/100 ports. This will allow me to create 2 wireless signals, with 2 different DHCP scopes and 2 different SSID´s, basically allowing me to extend the range, with the 2 routers connected with a physical wire.
This works when connecting them with a short, 2 meter cable. Using a short cable I am able to associate with the second router´s SSID, get a DHCP address from that router, and then turn on RIP on both routers and have traffic route from the second router to the first one and out to the Internet successfully.
However, when I replace the short cable with a longer one, either 80 meters or 100 meters, I don´t get a link light between the routers. I do get a link light if I connect to a 10/100 port on both routers, but RIP doesn´t seem to want to exchange routes on the second router out anything other than the "Internet" port. Moving the cable back to the "Internet" port fails to produce a link light (unless I use a really short cable, which does produce a link light).
So my question is this: from a Layer-1 perspective, is the "Internet" port an Ethernet port that enforces a cable-length limit that doesn`t follow the standard 100 meter rule?
--- Christer

well..the internet port is definitely an ethernet port...however, it is not supposed to limit the cable length .. try a 50 m cable and check whether it works...because my friend had a similar kind of an issue and it worked fine with a 50 m ethernet cable ..

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

Wireless-N Gigabit Router ports wont open?? NEED HELP

I upgraded my linksys WRT54GX to a linksys Wireless-N Gigabit Router with Storage Link and now when I open ports or specify my ip under a DMZ, my ports are still being blocked. Im trying to open a few ports for my applications but when i test them.. it fails, ive turned off my MCaffee firewall opened the ports and even put my static ip and enabled DMZ and it still shows my ports as not going through. I would appreciate any help.

I have updated to the most recent firmware. I had a few technicians setting up a crestron Audiorequest server in my houes and for the equiptment to work properly they needed to open up about 5-6 ports. I could see they were having problems while forwarding the ports on the N router. They told me even though the ports were open, they were still being blocked by the routers firewall. I had to set up my old WRT54GX modem and now the ports are benig accepted. I now have a 250 dollar router sitting on my floor because it is not working properly. Any suggestions?

I have purchased a new iPhone on the online store, but how come Apple can send me an repacking old device (with scar on both the border and the cable port)!!!! And after I phone to their hotline for the issue, they asking to give me hk$400 cash coupons??

I have purchased a new iPhone on the online store, but how come Apple can send me a repacking old device (with scar on both the border and the cable port)!!!!
And after I phone to their hotline for the issue, they asking to give me hk$400 cash coupons???? This action make me very angry. I have pay for my goods, but they are giving me some repacking rubbish, and trying to treat me as a beggar????
I have make the request to give me back a new device in good conditions, I will wait and look for what they will delivery.

Do you feel better now that you have vented?
This is a user to user forum... if you want/need assistance, contact Apple directly.

Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?

Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?

If it "joined" my network is it extending the coverage of my wifi network ?
Please review my previous answer in the post above......
But, the Express does not "extend" or "repeat" the wireless signal when it joins a network. In other words, wireless devices cannot connect to the AirPort Express the way that you have it set up.
If so can my Airport Extreme be set up to "join" my network and also extend the coverage of my network ?
Again, please review my previous answer in the first reply above......
The AirPort Extreme does not have this type of capability.
If you have both an AirPort Extreme and an AirPort Express.....my suggestion....again, found above in a previous post.....
It takes a minimum of two Apple routers to extend a signal using wireless.
You could do this by connecting the AirPort Extreme to your cable router using a permanently installed Ethernet cable and then configuring the AirPort Extreme to "create a wireless network".
Then add an AirPort Express in a location where it can pick up a strong wireless signal from the AirPort Extreme and configure the Express to "extend a wireless network".
You would not use the wireless on your cable router at all, unless you wanted to reserve that network for guests or something similar.

W7 PCs on router LAN port can not find Wireless connected OJ Pro 8500A Plus following router upgrade

My Broadband Supplier has replaced my internet router with a new one with dual N band Wireless and GigE LAN ports. The 8500A printer has been successfully WPA wirelessly connected and works fine with a wireless connected Sony windows 7 laptop and Apple devices. However neither of the Dell LAN connected windows 7 desktop PCs or the same Sony laptop when connected to a LAN port on the router can find the printer. I have tried reinstalling the printer software with the latest version from the HP site OJ8500_A910_1315 and the installation fails as network environment checker can not find the printer. I have run the HP network diagnostics with both firewalls in the PC and router disabled with no success. The LAN itself seems to be working OK as the PCs can see each other, exchange files and and can access the internet. The router has been checked by the broadband supplier technical uupport. The printer is visible as a network connected device in Windows explorer so you would expect the HP software to see it. Is the only option to fix the printers IP address and use that in the installion procedure or are there other settings I can alter to get the HP network environment checker to work properly? Thoughts would be appreciated.
This question was solved.
View Solution.

In the router settings look for "wireless isolation", "AP isolation" or the like and make sure it is DISABLED. This setting disables communication between the wired and wireless clients.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Port fowarding for linksys WVC54GC Wireless G internet video camera

Hi
I have recentlty installed a linksys WVC54GC Wireless G internet video camera. My plan to is to view the video from the internet. As part of the setup, I am using SOLOLINK DDNS service. The set up requires me to do port forwarding for the camera which is part my home network ..
I do not know the values to input for
public port
private port
with in the port mapping environment in the Air port express base stations.
Linksys suggests I open port 1024.. Can any one help me in the setup ..

Thanks,
I have done the changes, It does answer the specific issues i had asked. However I am still unable to view my camera from the the internet.. I did some reading up and I think the problem is due to the IP address..
My AEBS assigns IP which looks like 10.0.1.1 .... In order avoid changing IP, i had assigned the camera with the static IP 10.0.1.252. This is outside the AEBS dynamic range. Hence when i access from internet, i get a message that server is not responding. it looks like this is not a valid IP from an external internet world... I have looked at the AEBS settings and found the actual IP in ther internet tab.. Should I assign the camera with the actual IP ??.. However that is DHCP, so I am a little lost ....

Charger/USB cable port cover problem

Charger/USB cable port cover gum is damaged and cover cannot be closed, what should i do?

You could try to either return your device to the place of purchase or contact Xperia care and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/
or buy new flaps from amazon or ebay for example and replace them yourself
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

I have a TC which is connected wirelessly to my router. I would like to connect a mac in another location via ethernet to the TC. I can't seem to get it to connect. Am I missing something?

I have a virgin Superhub which serves my wireless needs throughout the house. I have a Timecapsule which connects wirelessly to the router with no issues. I can backup my MBP over wireless easily. I have now got another machine in a different part of the house that I would like to connect to the network. It doesn't have wireless so ethernet is the only option. I have a number of options 1) run cabling - not really possible 2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet.
I like option 3 because
(a) - I don't have to spend any more money and
(b) - my wife wont complain about cables also see (a)
Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks

Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Airport Express for stereo / Belkin Wireless G Plus Router/

Quicksilver G4 using Ethernet connection directly to Belkin Wireless G Plus
Router . Airport Express working remotely via router to stream audio to
loudspeakers. Was able to choose (from iTunes window) whether to play thru
computer speaker (1) or remote speakers (2)
Problem: I temporarily disconnected the Airport Extreme unit. No options now... can only play thru computer. iTunes no longer
shows a dropdown selection option to stream to remote speakers.
Have reset Airport Express. Have used Airport Setup to re-install....have
done this using both a laptop G-4 (successfully to be able to a/b select
either computer speaker or streaming to remote) but when trying to do
the same re-install from the G-4 Quicksilver.... and getting a message that
the installation was successful.... iTunes streaming network signal doesn't show up in the Quicksilver menu bar AND neither is there an option to select
streaming to remote speakers.
Other manipulation tried: disconnected cable modem, reconnected to
"reset" the modem. Other observation: the Airport Express indicator
is steadily green.
I hope this makes enough sense that someone like Tessarex can suggest
a solution to enable iTunes streaming with the G-4 Quicksilver, via the
wireless Belkin router to the Airport Express and stereo. (I don't want to
have to resort to using my wife's laptop to initiate

With your QuickSilver G4 connected via Ethernet to the Belkin router, you should be able to stream iTunes to the AirPort Express Base Station (AX) by joining the Belkin's wireless network as a wireless client.
Try the following...
To set up AirTunes on the AirPort Express Base Station (AX), temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (checked)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

PC to cable port of AExpress, AE wireless to internet router - possible?

Similar Messages

Maybe you are looking for