PC to Mac conversion problem on (older) ipod
My ipod was set up with a pc (about 1 1/2 years ago). Now that I'm running the latest OS on my ibook G-4, I want to erase it and reformat in mac. I also just bought a new nano. I plugged it into my ibook and everything works great. When I use the same cable to connect my older ipod (still running pc), I have the following problems:
The computer doesn't seem to "see" the old ipod.
I get a "do not disconnect message" on the old ipod. The battery doesn't charge with the cable (even though that same cable charges the new nano).
In fact, the battery on the Ipod seems to get depleted. I don't know if there is a cable compatibility issue, a port issue, the PC vs Mac issue, or all 3. I have a whole new audio library on my computer, so I'd be happy to dump the stuff on the Ipod, but how?
Thanks,
Mark
solved with help on another forum. OIder ipod requires older cable as well. Thanks all
Mark
Similar Messages
-
Trying to help out a PC-to-Mac convert here. He has been using his iPhone with iTunes on a PC, which has since gone belly up. He just got a brand spanking new MacBook Pro! The problem happened when he hooked up his iPhone to his new laptop and the first thing that happened was his contacts on his iPhone were deleted. He does not want the same thing to happen to the rest of the contents on his iPhone. Any advice that I give this Mac newby?
Yes. He should use the backup from his PC to move the iTunes library to his Mac. That should contain all of the music, videos and apps he had previously been syncing to his PC.
This article may be helpful. http://www.macworld.com/article/146958/2010/03/moveitunes_windowsmac.html
If he did not make a backup of his PC and the drive from the original PC is unreadable, he may have a bit of a problem. -
Neither my iphone nor my ipad would appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod to itunes using the same mac though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?
You need to be using a Mac OS X version at least as new as the one given in the device's original system requirements.
(74595) -
Ricky Gervais Podcast on Older iPod problem
I'm on a A1019 (one of the first generation ipods).
Have had ZERO problems with it, except for this Podcast (The UK ricky Gervais) one. It seems to skips every episode and then goes on to play the next thing that isnt Ricky Gervaiss.
Now, here's the weird thing: No problems of ANY kind with Any other Podcast (including ones that are "Explicit" eg scott Siglers). Ricky Gervais one also plays just fine in iTunes...
Anyone else have this problem - I've seen vague mentions to some people having problems, but nothing really useful. My iPod works just fine, apart from on this one podcast. My guess is some internal tagging that is broken on my rev of the iPod, but this is SO annoying.As this is a user-to-user forum you don't get feedback from Apple.
If you don't get replies, the readers of this topic obviously just don't know the answer.
I downloaded a few episodes and they play fine on my even older iPod (1st gen. 5 GB scrollwheel model).
Podcasts are not downloaded from the iTMS, but directly from the website of the podcaster.
Try downloading the mp4's (or mp3's) directly from their website (http://www.guardian.co.uk/rickygervais) and see if they play on your iPod.
Choose to download the linked file and, after downloading change the .mpga extension to .m4a.
Add it to the library. They won't show up in your Podcast directory however.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data) -
Windows to Mac conversion of an IPOD
Can you convert a MS-Dos Ipod to Mac?
There is no such thing as windows formatted ipods anymore. All ipods are now HFS+; the ipod software in windows does a conversion for reading/writing to the HFS+ ipod.
For the older ipods, I think you can format them mac or windows. Use the ipod update software to do so.
12 iBook G4 1Ghz Mac OS X (10.4.3) -
Are most problems with older 5G or with newly release iPods?
Hi,
I was really interested in buying the 80GB iPod that was just released but was wondering if a lot of the problems that people are reporting are with the older iPods that have been updated v1.2 and iTunes 7 or if it's with the new ones? Should I wait a little while until iTunes 7 is fixed?
Dual 1.8GHz Power Mac G5, Powerbook G4, 4G iPod, iPod Nano Windows XPI have a new 80g ipod. No problems with the software at all but then I'm working with a clean slate.
-
i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Sync older iPod classic to new mac
Hi folks
I have just bought my first mac computer and my ipod classic will not sync. It is connecting and listed in devices but the content is greyed out. It will not sync to pick up new purchases.
Is this due to it only being used on a windows pc before?
How due I preserve my music and get the sync working?
Regards
JohnRalph
The third article seems to answer my problem. The ipod can only be used with a windows computer unless I restore it on the mac computer.
I still have a laptop on windows so will use it there.
All I have to do now is get rid of the hundreds of duplicates in itunes!!
Many thnks
John -
My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?
I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported. -
Dreamweaver cc html entity conversion problem in mac -NO utf-8 related answer please
I probably am fighting against a bug existing in DW for a while, and i'm really on the edge of bursting out!
Here are the specifications:
Dreamweaver CC from creative cloud (also tested w/ CS5.5 too) installed on mac, OS and DW user interfaces are english, and on mac turkish keyboard layout is also installed.
I have been using DW for maybe 15 years, since it was macromedia.. But was always on windows. This is the first time I use it on mac. Here is my problem step by step:
1- Dreamweaver > Pereferences > New Document > Default Encoding: Western (ISO Latin 1) (NOT UTF-8 PLEASE, IT KEEPS THE CHARS UNCHANGED, ISO LATIN1 IS IMPORTANT)
2- Go to Design View,
3- There are 6 special characters in Turkish (times 2 for the caps versions of course), type:
ĞÜŞİÖÇğüşıöç
4- Go back to code view, what i should have seen was:
ĞÜŞİÖÇğüşıöç
But I see:
ĞÜŞİÖÇğüşıöç
There are 3 chars (and capital versions) NOT converted to html entity at all. Which were: ĞŞİğşı
But I should have seen them as: ĞŞİğşı
Any help would be appreciated, I do not want to leave my old friend DW just because of a weird conversion problem...Ok, when you look at the code view, what do you see exactly?
do you see unconverted
ĞÜŞİÖÇğüşıöç
or converted
ĞÜŞİÖÇğüşıöç
Here is one of my reasons:
I sometimes create newsletters in turkish for my customers, and the html files i prepare are sent to customers attached as inline through various versions of outlook or thunderbird, or through i completely different email sender company (none is sent by me, i only create the html file). And most of the time the headers and some coding are cut off from the code when used to send as newsletter, and i have no control at all on it. so i have to create absolute correct viewed/rendered html files since i have no control at all on which sending method will be used or which os or browser or mail system will be used to open it... -
I can not get my ipod touch to sync to my laptop. The people at the apple can not solve my problem. My ipod will sync with other mac's or pc.
My ipad will sync with my laptop.You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I have an older ipod touch (generation 2, maybe 3 - I don't know). The touchscreen is unresponsive. Worked yesterday but not today. Can't do the "slide to ublock". Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a 64 gig older ipod. The other day I was downloading some music and a sync box came up on my screen. I didn't want to sync with my library, so I said not and went ahead making some playlist. After I got done and I ejected the ipod, I noticed that all my playlist were gone, all my downloaded music will not play, my videos and music will not play. I see them on the screen, but it will not play them. I tried plugging the ipod back in and now my library will not even recognize the ipod like it did before. What did I do. I have tons of stuff that I cannot loose. It has taken me years to get it. Please help.
As this is a user-to-user forum you don't get feedback from Apple.
If you don't get replies, the readers of this topic obviously just don't know the answer.
I downloaded a few episodes and they play fine on my even older iPod (1st gen. 5 GB scrollwheel model).
Podcasts are not downloaded from the iTMS, but directly from the website of the podcaster.
Try downloading the mp4's (or mp3's) directly from their website (http://www.guardian.co.uk/rickygervais) and see if they play on your iPod.
Choose to download the linked file and, after downloading change the .mpga extension to .m4a.
Add it to the library. They won't show up in your Podcast directory however.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data) -
I am problems with an older Ipod classic running 1.1.2pc using earbuds with Ipod inline remote. The earbuds work fine with my new Ipod but not the older one. Any suggestions?
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
Older intel mac display problems (x1600)
My mom has an intel imac (the version before the black/aluminum kind) and it had very minor display issues with Tiger (very infrequent horizontal lines). They were all resolved with further point releases of Tiger.
After upgrading to Leopard she has had numerous problems, all revolving around frequent and numerous horizontal lines. They sometimes get so bad that the current window is almost completely obscured.
Here is a flickr set of images that show the problem and the display specs. I know that was happening to users with newer imacs and x1900s, is this happening to other x1600 users?
Any ideas on what is going on? I told her to call apple, but her warranty has run out and she feels uncomfortable calling because she is not a technical person (exactly why I told her to get a mac—I have egg on my face now). Should she downgrade? Can this be a hardware problem?Hi everyone, i have bought an iMac 20 with a core 2 duo 1 GB ram and an ATI x1600 (a white one, because the screen quality is better than the new iMac 20 alu)
and i've some display problems. First i was on Tiger and i didn't noticed any problems but as leopard came out i rapidly upgraded to it and then came problems with the display.
To make short, the lower part of my screen is lagging anormaly. When i drag a window or even the dock's animations are slower. And it doesn't occur on the upper part of my screen, windows can be dragged smoothly, there is no lag even if the CPU is working at 100% (like on every normal mac...).
I've noticed there is a little bump when i'm dragging a windows from the top to the bottom of the screen, it's like the window enter another area.
I've of course checked a lot of boards on the www, so i've tried a lot of things, my card ATI X1600 128mo PCIe is fully working with core image and quartz extreme.
Some people said to wait that spotlight finished to index, but it's done and the problems are still there.
Time machine is off
I don't use coverflow and i've tried it, it doesn't change anything.
I've also re-installed Tiger and, wo-ow the problem is still there, especially when all is up to date.
It seems that, the problem come from the last firmware update, i don't know if this firmware update was done for improving compatibility with bootcamp or leopard but for me it has added this strange display behavior.
I've also tried to turn off quartz extreme, and it's even worst, worst on the lower part again but no changes on the upper, everything run smoothly.
As i didn't noticed it when i used my mac for the first days (on Tiger and without the firmware update) and on windows with bootcamp there is still no display problems at all, i keep thinking it's not an hardware problem but a software (firmware, display on Mac osX) problem.
It should be solved by a new firmware or Mac os upgrade until then i have to do with it.
By the way, does anyone knows if there's a way for downgrading the gpu firmware ? (when i try, it say that i didn't need it), it's the only thing that i havent tried.
Thanks in advance, and i beg your pardon for my pittyfull frenglish :s
Maybe you are looking for
-
Colors changing on my calendar
What is Apple doing about supporting its clients with information on fixing the problem of colors changing on iCal? Is this even on their radar?
-
I built a basic "checkbox page" with a list of bus numbers next to a check box. once the check is made, I want Dreamweaver to insert the time that it was pressed right next to the bus number. How do I do this? Any suggestions would be great.
-
Adobe Reader 10.1.3 Performance Problems (Open PDF from Outlook)
Hello all, Adobe Reader 10.1.3 Multi Language version was rolled out to several hundreds of Win XP SP3 client machines. Now users start reporting that Adobe Reader starts very slow. Most users complain that opening a PDF attached to an email in MS Ou
-
Problems with Friday the 13th update.
First of all, it's rather an odd date for Verizon to update the Thunderbolt firmware, don't you think? Secondly, I have had nothing but bugs since I did the update and am a bit perturbed by the fact that Verizon has released this. It appears to me th
-
Aperture 3.0.2 quits unexpectedly when trying to update previews
After upgrade to Aperture 3.0.2 it began quit unexpectedly when trying to update previews&When i stop updating it works fine. But then i found out that it cant modify any object without quitting. Any type of modification leads to A3 to quit with erro