PC to MAC - OK; MAC to PC - no connection

Description:
1. I have a LAN network in my neighborhood. I'm not the administrator but as far as I know there is a router.
2. I have settled the internet on my MacBook and it is much better then the PC desktop. faster...
3. I have set all the needed specs: Internal IP; Router, Gateway and whatever needed.
4. I have unabled sharing options for FTP and HTTP on the sys prefs.
5. The PC has a guest account disabled and a password set for other users. (I had no problems connecting my PC laptop to the desktop)
PROBLEM:
1. Windows can see the MacBook only when the MacBook FW is down (inspite of what the "sharing" panel says that FW will now work for the sellected options, but this is the minor problem)
2. The main problem is that MacBook CANNOT open or see the PC. I try from the finder (CMD+K) and type: smb://192.168.xxx.xxx
the reply I get is: "cannot connect to the server because the name or the password is not correct"
I never set any passwords or user names in the Keychain...
Please, advise me...
Mac OS X (10.4.7)

Asen, did you check the Workgroup name as Anthony
suggested?
Applications>Utilities>Directory Access check
SMB/CIFS...
Yes, this is where I add the workgroup. Problem is that on the PC it is set: VCS where as the finder opens it as Vcs (note the difference in the cases).
The workgroup name there must match the PC workgroup
name. That name may or may NOT be "workgroup".
It matches besides the lower and upper case difference.
Not in the Finder.
Finder finds it in the networks. but it finds it the difference in the lower and upper case of the letters.
In your original post, you said there is a router in
your neighborhood, but it isn't yours. Is that still
true? Using someone else's router?
Yes, I still have a router (is it the same as gateway?). Shall I explane why? I could open other PC's from my network.
Also, why did we change the subject of this thread
mid-stream, I wonder?
Changed back...

Similar Messages

Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

IS it possible to share external hard drive Mac To Mac, over a PC network,

I would like to explain this situation in it's own post so it's clear. I am at my brother's house (PC user) and both my wife and I are Mac users who are on the network. I have an external hard drive which is plugged directly into my wife's Macbook. I am trying to access it from my Macbook pro. This is my first time sharing and this is what I have done:
I went into "sharing" on her Macbook and turned file sharing on.
I added the mounted drive as a 'shared folder' and made everyone able to read and write.
Under 'options' I checked all of the boxes, including AFT, SMB and FTP (was I suppose to do this?)
Now, when I am on my Macbook Pro I look at the network and I see the PC network server, and her Macbook there (along with another weird network folder called "Mac001ff3cdf6ff", which I'll get to in a minute)
When I click on her computer and connect, I see the folders there which I've previously been able to share.
However, there is no external drive to be seen, even though it is mounted on her desktop of her Macbook downstairs.
When I go back and connect to this strange network folder called "Mac001ff3cdf6ff", however, I see again all the folders that I see when I click on my wife's Macbook folder AND the external hard drive..which is great...BUT, why can't I see this when I click on her Macbook folder? I did notice too that the icon is a PC icon for "Mac001ff3cdf6ff" when I click on 'more info, says "PC server".
Does this mean that the only way for me to access the external hard drive is through a PC server and this is the 'long way around' to get into the external drive? And why can't I connect directly from my wife's Macbook icon in the network folder?
Help please! Thank you. I hope this is more clear.

Is there anyone out there who has had success with sharing an external hard drive over a network from Mac to Mac? I just can't figure this out! It's so weird. When I look in the network places I see the icon for my wife's computer, and the PC ones of my brother in law's drives connected to the network. And ONE of those PC icons (you know, the one with the blue screen of death on them?) is labeled with "mac934ffsg" or something similar. I've been experimenting and when I add the hard drive in "shared", or if I add another folder in 'shared' on her computer it is THIS icon in the network that is updated.
Does anybody come close to my situation? Is there anyone sharing a couple different Macs over a network set up with PC's?
This is driving me batty...

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

Going from a .Mac Family (2 macs) to a Single .Mac (2 Mac) pls take a peek

good day.
It's renewal time and I'm going to downgrade my .Mac account from a Family acct. to a single.
The 2nd mac (and only additional mac) uses .Mac only for Blog and Photo iWeb uploads... So can I...
Simply update the .Mac login p/w info on the 2nd mac account with the main login info and he can then publish his Photo and Blog from there or will that overwrite my Photos etc.... (coming from the 1st Mac) ?
Thanks
Tom

good day.
It's renewal time and I'm going to downgrade my .Mac account from a Family acct. to a single.
The 2nd mac (and only additional mac) uses .Mac only for Blog and Photo iWeb uploads... So can I...
Simply update the .Mac login p/w info on the 2nd mac account with the main login info and he can then publish his Photo and Blog from there or will that overwrite my Photos etc.... (coming from the 1st Mac) ?
Thanks
Tom

My iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?

my iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?

Hello Mr Potatohead,
Thank you for the details of the issue you are experiencing with your iCloud Contacts. I recommend reviewing the sections titled "General troubleshooting," "Troubleshooting with iOS devices," and "Troubleshooting iCloud Contacts in Contacts on OS X Mountain Lion or later (or Address Book on OS X Lion)" in the following article for the issue you described:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

What is the video quality loss going Mac to PC vs Mac to Mac?

Here's the deal, my wife is in the hospital and forced to miss her daughters wedding. I'm trying to sort out an iChat from Louisiana to Texas so she can watch the wedding live and ideally let her daughter see her mom during the ceremony. I've not been able to establish an ichat link into the hospital due to the 'does not reply' demon. So I know its a port issue but this huge hospital is PC only, totally mac ignorant but super willing to put a hot shot PC in my wifes room. My question is what am I giving up by not going mac to mac and giving in on a PC at the receiving end? Are the benefits of the h264 codec only available on the mac to mac solution? Will the video received on the PC be smooth or choppy? What about in a full screen mode? (I guess AIM Trillion is the only option for that)
I'll be transmitting using a G4 Powerbook, 10.4.6, 256mgb ram. iChat 3. I'll be shooting with a digital video camera with firewire output. I've tested that, it all works fine in recent chats with other macs. I'll be sending over Earthlink DSL line, 256kbps up/3mgbs download. The Hospitals bandwidth is T-1 huge so not a problem. I'm just afraid I'm not going to get them to sort out the issues for a mac and will have to give in to a PC.
Appreciate your thoughts. j
G5 PowerPC Mac OS X (10.4.6) 1.6 GHz

Hi octoguy,
iChat makes hardware and connection speed checks as it starts up.
This gives you the framerate and bit rate duirng a call.
Lets say that your processor gives your iChat 15 fps
This will be the rate that you will then see to a another Mac.
The same computer is likely to get 10 frames per sec to a PC.
This is some part due to the PC putting a fair amout of effort into producing a clear detailed pic.
On some PCs this setting for the video pic is so high that the audio will drop out completely.
The cure is to bring the PC preview to the front (tabs)
Then click on the small icon that appears to the right and adjusting the slider that appears to the left.
This will incease the frame rate and bit rate from the PC. It makes the video look smoother although the actual quality has gone down (you may not be able to judge this quality difference by eye)
As general rule you will get about 2/3rds of the normal Mac to Mac framerate shown in the Connection Doctor. It also seems to take about 50% more Connection speed to get the same quality video.
So Mac to Mac min is 100Kbps where as Mac to PC will need about 150kbps.
The quality drop from 15 frames a sec to 10 frames a sec does make the video generally more blocky but does also depend a fair bit on the processor power of the PC and the camera used.
I know that sounds a little vague but there are really many variables that can be a factor.
11:23 PM Monday; April 24, 2006

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. Any ideas on how to recover my data?

I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. I can see the HD but the volume part is greyed out. Any ideas on how to recover my data?

There are other methodologies of scanning a HD
which involve data extraction, but loss of metadata is often the result if the directory is corrupt.
Metadata is the info on what the data IS.
Like having all your papers thrown in the air, its all there, but just a giant mess.
This is why you always always must have several external HD redundancies of your data. One isnt enough, neither is two really.
see here, and dont let that happen again>
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Was that your only copy of your priceless data? Just that one external HD?

Cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2

cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2. I followed the instructions step by step but it does let me install if fully when asks me to fully install it says it cannot where to install.

Hi,
how much diskspace did you assign to the Windows partition ?
And did you do the reformating of the WIndows partition as described on pages 8-10 of the BootCamp Installation Guide ?
In your first post you mentioned 'fully install' twice. Any chance that the XP disc you use is an Upgrade disc and not a full retail/OEM one ?
Check with the label on the disc because such XP upgrade disc are not useable with BootCamp.
Regards
Stefan

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

Mac os x 10.7.4 connected to a photosmart c309a. Scan documents to word and edit?

I have a mac os x 10.7.4 connected to a photosmart c309a. I use the mac drivers to scan document. Everything is updated and working fine. However, I would like to scan a document, copy it to word, and edit. How can I do this?

The OCR software does not necessarily need to integrate with the HP Photosmart driver. You scan the document, save it as a JPG, TIFF, PDF or whatever and then run the OCR software against the scanned file.
I use Readiris with an HP AIO printer on Lion and it works just fine, using MS Word to edit the results.

HT2497 Is there anyway I can upgrade my Power Mac G5-Mac OS X 10.5.4 to Intel Mac.

I have Power Mac G5-Mac OS X version 10.5.4 and has just upgraded it to version 10.8
I there anyway I can upgrade it Intel Mac so that I can install windows and Mac.
nana

No.
(70485)

Mac Mini doesn't see PC connected via AirPort

I created a wireless network using the AirPort built into the Mac Mini. My PC laptop connects to this network, but I can't find the PC or any of its components from the Mac. I am new to AirPort so maybe I don't know where to look. However, it seems there should be some icon for the PC on my desktop or in the finder. Is this a Mac/PC compatibility issue?

To see the PC:
1. In the Finder, press Command-K.
2. Enter the PC's IP address.
3. Authenticate with your username and password form the PC (You need a password for this to work)
Then if you want, write an Automator app to do that for you and a keychain for your passwords.
Hope this helps!

PC to MAC - OK; MAC to PC - no connection

Similar Messages

Maybe you are looking for