PC to Mac using MA: no verification code on PC??

MA on my PC is telling me it's waiting for my Mac to connect, but my Mac is already recognizing my PC and the verification code appears on my Mac. Yet my PC is still searching for a connection. Help?

Have you installed the Windows Migration Assistant from Apple?
It can be downloaded from here: http://support.apple.com/kb/DL1415
This needs to be downloaded and installed on your Windows PC. Once installed and running, your Mac should be able to Migrate Data to your Mac.
See also: http://support.apple.com/kb/HT4796
Hope this helps

Similar Messages

  • New eprint verification code

    Hi there
    All was going well but today hp seem to have lost my deskjet 4625 from hpconnected. I went to set it up again but need a new 4 digit pin code. How can I get a new one of these? The old one has expired.
    Thanks in advance
    Jeremy

    Hi Jeremy, are you still having issues printing to your 4625 via ePrint? You use the term verification code in the subject of your post and mention a 4 digit pin code so it sounds like you're referring to the ePrint mobile print app on your phone. The validation of the app on your device is a one off step and shouldn't need to be repeated. If you were able to print from the device using the ePrint app to the 4625 before but not now, check that the printer is online and connected to the Internet. I'll wait to hear back from you before suggesting any further solutions.
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help

    I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help.

    Hello, Kutoz. 
    Thank you for visiting Apple Support Communities. 
    Here is some information that you may find helpful with this issue. 
    I'm not receiving the verification code via SMS.
    Make sure that you have a strong cellular network connection on your phone.
    Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
    Make sure that the correct phone number is associated with your account:
    iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
    OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
    If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
    Get help using iCloud Keychain
    http://support.apple.com/kb/TS4644
    Cheers,
    Jason H. 

  • I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

    I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills.  I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number.  Please let me know as soon as possible so I can change passwords or anything that is needed.
    thanks

    If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
    Barry

  • I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

    I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

    Thought so - ace - find my phone really needs an unlock function. - another £40...

  • HT4796 im having trouble getting my laptop to connect to my mac using windows migration assistant. my mac comes up with a code but my laptop is waiting for my mac to respond but nothing happens

    hi all
    im having trouble getting my laptop to connect to my mac using migration assistant. my mac has a code on the screen but my laptop doesnt respond and just says it waitng for my mac to respond.
    any idea? please

    Hi Christina, belated welcome to Apple Discussions if nobody said it already.
    I've had some experiences with these new flash memory recording camcorders, and I'll give you a quick rundown of what I've learned. Many of them (JVC, Panasonic, etc.) tend to record in a .MOD file format, which is non-standard, proprietary, and unrecognizable by most software. I thought Canon was usually a little more standards-compliant, but it appears they also use this .MOD format in your specific camera model. There are likely a couple ways we can get around this though!
    In order to play the files, you will likely need to change their file format (.MOD) to .AVI manually. You'll have to locate the files on your Mac, and then manually change the file names so that the file extension (after the period) is .AVI
    At that point, a video player application such as http://www.videolan.org/vlc/download-macosx.html>VLC should play the files fine!
    You should be able to transfer new video files from the camera to the Macbook Pro with no problems as well. Just plug in the camera to the computer via USB, and also make sure the camera is plugged in to charge. Once it's plugged in, open iMovie (came with the MBP, in the Applications folder) and the MBP should take care of the rest.
    Let me know if you have any success with any of this!
    FYI, the thread that I got some of the above information from is here:
    http://forums.macrumors.com/showthread.php?t=478326
    --Travis

  • HT1212 what is an iCloud keychain verification code and how is it used?

    I recently had my iPhone replaced.  During the setup, i got a text with an iCloud keychain verification code, but I cannot see where I use this code (I presume to unlock all the passwords the keychain contains).

    It seems like one of these in the link I provided answers your question:
    How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
    If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
    Your iCloud Security Code
    The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
    If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
    Can Apple recover my iCloud Security Code?
    No. If you enter your iCloud Security Code incorrectly too many times, you won't be able to use that iCloud Keychain. You can contact Apple Support, who can help verify your identity so that you can try again to enter your iCloud Security Code. After a number of incorrect attempts, your iCloud Keychain is removed from Apple's servers and you will need to set up iCloud Keychain again.

  • I need to get my verification code via mobile number but use a different and can't get it, how do I update my number?

    I need to get my verification code via mobile number but use a different number and can't get it, how do I update my new number so that I can get the text message verification code?

    Verification code for two-step verification? If so, you can register a new new number to receive the code via text message by going to https://appleid.apple.com/account/home and click on "Manage Your Apple ID" and then on "Password and Security" and then "Add or Remove Trusted Devices." You will need a verification code in order to log in so if you currently only have one and it is no longer available you will need to use your Recovery Key. More information at: Frequently asked questions about two-step verification for Apple ID - Apple Support

  • Hello friends , I have started with writing  c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same

    Hello friends , I have started with writing  c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same and is there any pre stalled text editor on mac if yes then where and if no then which text editor to install and how to install gcc...please help me out thanks in advance !!!

    I have started with writing  c code on mac using xcode .....but one of my friend told me to use gcc for coding.
    Why? If you are developing and writing code on a Mac why would you not use the tools Apple has given you? And Xcode, once you get use to it, is a very nice development environment that will make you life a whole lot easier.
    If you insist on using an editor and the terminal I would recommend  Emacs   but it has a long learning curve so  something like TextWrangler  will work too.
    As for the compiler if you have Xcode installed install the command line tools and you will be able to compile from the terminal.
    good luck

  • If i lock my Mac using iCloud "Find My.." with a code, but now i have forgotten the code i used but have my Mac bac.  How can i Unlock it????

    If i lock my Mac using iCloud "Find My.." with a code, but now i have forgotten the code i used but have my Mac bac.  How can i Unlock it????

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • Never recvd verification code, in PHOTOMAIL dialog box it is asking for one when trying to email pictures,never saw any codes when setting this up

    verification code, never received it when setting up contacts to email pictures, in PHOTOMAIL dialog box it is asking for one to verify my email address and said it was sent to my email, went back and checked and there wasn't anything there, where is it or what do I need to do now????

    Does the account you are using have admin rights? I found this :
    http://support.apple.com/kb/HT2397
    +In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
    Sounds like it might be worth a try from an admin account first.

  • I am trying to set up iCloud keychain, but it keeps sending the verification code to my land line, even tho I have gone into my apple account and changed to my mobile phone

    I am trying to set up Icloud keychain, but it keeps sending the verification code to my land line (which I guess I entered back when I first got my MacBook).  I have gone into my apple account and changed the # to my mobile phone, but it continued to send it to the land line.  Probably is something simple, but I am not a techy!! 

    Hi,
    As regardss to the iChat and iChat Sharing categorisation you have used.
    In iChat 6 (lion) and Messages (Mountain Lion) the apps login to AIM and to Me.com
    The Login to Me.com allows AIM to verify the password to the iCloud issued names (@me.com and @iCloud.com)
    This "Dual" login also prevents the newer iCloud issued name from using this site
    (it has extra Privacy settings that iChat can't access for your AIM and Aim valid Accounts)
    Ignoring the @mac.com and MobileMe entries in the Add Account Screen in iChat and using the AIM one does not get around this issue.
    AIM and @mac.com names still work in older versions of iChat.
    The short answer is that iCloud issued Apple IDs do not work in iChat 5 or Earlier.
    10:12 PM      Friday; February 15, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Icloud keychain verification code text never arrives

    I've been going through this process over and over and I never get the text message I need to get this rolling. It's making me crazy I've tried started from my iPhone and my mac same result no code by text message ever arrives. ios 8.1.3 and OS 10.9.5

    Hello michelesapple,
    Thanks for using Apple Support Communities.
    From your post I understand you are unable to receive the iCloud Keychain verification code.  I'm sorry this is causing so much frustration, but it is understandable as it's a great feature to use.  To troubleshoot this specific issue where you're not receiving the SMS, please follow the steps below.
    If you didn't receive the verification code via SMS
    Make sure that you have a strong cellular network connection on your phone.
    Make sure that your phone number can get SMS messages. To check, ask someone to send you a text message.
    Make sure that the correct phone number is associated with your account:
    On your iPhone, iPad, or iPod touch, tap Settings > iCloud > Keychain > Advanced. (In iOS 7, tap Settings > iCloud > Account > Keychain.) Make sure the phone number under Verification Number is correct. If not, enter another phone number. 
    On your Mac, choose Apple menu > System Preferences. Click iCloud, then click Options next to Keychain. (In OS X Mavericks or earlier, click iCloud, then click Account Details.) Make sure the phone number under Verification number is correct. If not, enter another phone number.
    If you can't access a device that has iCloud Keychain enabled, contact Apple Support and verify your identity to get help setting up iCloud Keychain.
    Get help using iCloud Keychain - Apple Support
    Have a good one,
    Alex H.

  • Icloud keychain verification code

    I don't have access to the old phone number to recieve the verification code i've clicked on "Don't have access to this phone?' but it didn't really help.

    You can change the verification phone number by doing one of the following:
    Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
    Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.

  • In Elements 11 how do I get the verification code needed to send files as e-mail attachments ?

    In Elements 11 how do I get the verification code to send files as e-mail attachments ?

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Give it a try. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

Maybe you are looking for

  • Use of second interface (eth1) on ISE

    Hi. I am seting up a two-node deployment of ISE (3315 - version 1.2.0.899). Both appliances will be connected to my two core switches. I would like to know if I just have to configure one ethernet interface (eth0) on each ISE server and then connect

  • [SOLVED]How to disable USB autosuspend?

    Hello! A long time ago I installed Arch on my notebook and configured it's power saving using laptop-mode-tools. I also installed pm-utils for suspend/hibernate. USB autosuspend worked correctly - on battery every device (including mouse) was suspend

  • Bug or Feature, gnome increases lcd brightness on laptop random?

    When on battery, I dim the light on the lcd using the fn-f5 and fn-f6 button. This is all good. To save battery right. Sometimes, completely randomly it seems the brightness is turned to 100%. I used dbus-listen to snatch this up: signal sender=:1.18

  • ITunes update OS X Yosemite

    in apps it tells me i have a update so i download it (iTunes12.0.1)shows its installed below, but also at the top its says i need to update it and the red 1 in the app won't go away

  • Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

    I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Exp