PC to Phone connection suddenly does not work

I bought Nokia N86 2 weeks ago, I connected it to by notebook Vista using the USB cable provided. It connected fine, it always has this pop up on the phone like connect it as PC Suite and etc. I could transfer picture from the phone, and also transferred files from PC to the phone.
Yesterday, I tried to do the same thing by connecting the phone to PC using the cable. Nothing happened.
What is the likely problem? What should I do? Any help is much appreciated.

Sorry, I can't help with your specific problem but I'd just like to express how I'm becoming more and more disgruntled with Nokia's phones and software. I have had the same issue this morning and came here looking for a solution. My 3 week old Asha 300 phone was working perfectly yesterday (at least, once I finally got it to see the phone ) with either Bluetooth or USB connection to the PC be it tethered for 3G internet or synchronising and suddenly this morning it doesn't see the phone anymore on either. The computer hasn't been switched off and nothing has changed since i used it yesterday. I had a similar issue with my last phone, a 6275i. One day it'd hook in fine, the next nothing. So much so that I stopped bothering to back it up. And this was on 3 differnt computers with OSs ranging from XP Pro to Win7.
Their connectivity drivers are randomly flakely at best. I think this will be the last Nokia I buy.

Similar Messages

IPhone 4s bluetooth connects but does not work handsfree

My iPhone 4s bluetooth connects but does not work handsfree. Has worked fine with My iPhone 3s. The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.

Fixed by power cycling the iPhone

The button on the side that turns my phone to silent does not work and niether does the up volume button. I have tried restarting my phone, I did a soft reset, I checked all my settings, but nothing has worked. Does anybody have any suggestions?

Hello,
I have an iPhone 4 and recently started to have some problems. First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too. Also, my up volume button does not work. This is with the headphones also.
I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it. I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months! and I really don't want to go without my phone that long.
Does anybody have any suggestions?
Thanks so much!!

Sounds like it either believes that there are headphones plugged in, or the switch is broken.
Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective.

Connection pooling does not work Oracle Objects! Oracle please respond!

The problem is that when we retrieve Oracle Objects using pooled connection (closing logical connection at the end of every call)it takes 6-8 times longer than in case we share the same physical connection for all database calls. Parts of our application which do not utilize Oracle Objects (just old good relational data) works just fine with pooled connections - no performance degradation
This is my reconstruction of f the what is happening behind the seen, so some parts can be not entirely correct.
OracleConnection class caches StructDescriptor objects in descriptorCache hash table. StructDescriptor objects map content of oracle STRUCTs which are retrieved through the connection onto oracle type names. For example if you retrieve an instance of HR.EMPLOYEE_T oracle object from database some metadata will be retrieved and stored as an entry in descriptorCache cache table associated with "HR.EMPLOYEE_T" key to assist CustomDatum interface. It is a time consuming process and caching of this metadata improves it dramatically.
Now when using pooled connection descriptorCache gets cleared when you close your logical connection (java.sql.Connection) so next time you get a connection from your pooled connection it will have to repopulate the cache which as I said is very time consuming. As a result even though we can reuse our physical connection by using pooled connection whole setup does not work - fetching metadata takes a long time and we cant use Oracle objects in EJB environment (or Servlet environment)
Alex Roytman
Peace Technology, Inc.
(301) 206-9696
null

check out managed datasources in the manuals

Double escaping suddenly does not work anymore.

Hello,
We have WCF Data Service that is configured to use
double escaping according to this article
http://blogs.msdn.com/b/peter_qian/archive/2010/05/25/using-wcf-data-service-with-restricted-characrters-as-keys.aspx
During a long time (a year or more) this solution worked well for us. And suddenly, a week ago, we found that on some our services (in cloud, in out of cloud)
double escaping does not work anymore.
For example, request to our service may looks like
http://service-host/odata-service/ContentTreeNodes('ID-%257BFEE06CEE-F667-45A2-9014-394F4B7CD3B0%257D')/
In sample above we have ID that without double escaping looks like ID-{FEE06CEE-F667-45A2-9014-394F4B7CD3B0}
But when our service processes this request ID becomes like ID-%7BFEE06CEE-F667-45A2-9014-394F4B7CD3B0%7D.
And that is means that .NET (WCF Data Services) infrastructure removes only single escaping and forget (ignore) to remove second one.
We have an assumption that issue probably maybe caused by some Windows security update. Because on some PCs it works well.
Does anybody have similar issues?

Hi,
I suppose you tried to uninstall this patch from Azure VM. If so then yes, it can not be done. Seems it prohibited by MS or at least I do not have answer how to do it.
At the same time I had no such problems with out of cloud PCs.
BWT, we recently found that we do not require double escaping anymore in our service, because single escaping now works well for us. Looks like MS fixed an issue regarding # symbol in URL path. Now if URL has # in some URL path (for example in entity ID),
then single escaped # works well.

OLE DB Connection Build does not work

Hello All!
I am in the process of creating an ASP.NET application that
will initially have an Access database for test purposes on my
laptop computer. Eventually the database will be MS SQL. When I
select OLE DB Connection -> Build it does not work. I have
already tried the "fix" in
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19515
and it did not work.
I have also tried MS Access 2000 template and it does not
work. At this point there is no User ID or Password to this
database. Here is what is in the web.config file:
<configuration>
<appSettings>
<add key="MM_CONNECTION_HANDLER_ctv"
value="default_oledb.htm" />
<add key="MM_CONNECTION_STRING_ctv"
value="Provider=Microsoft.Jet.OLEDB.4.0;Data
ource=C:\Inetpub\wwwroot\CTV1_1\database\ctv.mdb;User
ID=;Password=;" />
<add key="MM_CONNECTION_DATABASETYPE_ctv" value="OleDb"
/>
<add key="MM_CONNECTION_SCHEMA_ctv" value="" />
<add key="MM_CONNECTION_CATALOG_ctv" value="" />
</appSettings>
</configuration>
I have installed IIS on the laptop along with .NET framework
2.0 - maybe there is an install issue?
I am using DreamWeaver MX 2004 with MS XP SP2 if that gives
any further clues.
Thanks for any help you can give!
Lisa
[email protected]

No errors are thrown. File I/O does not work. Can not read or write.
PrintPanel() no longer works.
Outside of my app, File I/O and printing works with other apps.

Isqlplus with full connection description does not work in netscape/firefox

http://machine/isqlplus?userid="user/pass@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.xxx)(PORT=1521))(CONNECT_DATA=(SID=xxx)(SRVR=DEDICATED)))"
This works in IE, but fails in netscape and firefox with: SP2-0874: URL argument is missing a keyword
It looks like a URL encoding issue. Has anyone seen this and if so have you found a solution?

Thanks for the try, but that didn't help. Actually, without the full connection description it works in both browsers, i.e.
http://machine/isqlplus?userid=user/pass@servicename
does work in both. isqlplus under firefox appears to not like the encoding as:
http://machine/isqlplus?userid="user/pass@servicename"
this does not work under firefox. But with a full connect string it appears I need the quotes as without nether works.

Wireless keyboard connected but does not work.

My wireless numeric keypad is connected to the iMac, but does not work. Wireless keyboard and mouse are OK. Tried connecting/disconnecting and restarting the Mac to no avail. Everything was fine yesterday. Any suggestions?

Try a SMC reset (could help, cannot hurt):
Intel-based Macs: Resetting the System Management Controller (SMC)
Barry

HT201317 Sometimes i take pictures and they do not transfer to my computer and i need to reset to make it work is this normal and also sometimes i copy pictures to upload file so it can transfer to from my Pc to my i phone and it does not work at all tim

1) Why does it not transfer picturesat all times even when my pc is on wi fi
2) When i copy pic into my upload file it does not transfer back to my i phone ?

DavidBenJeshuah wrote:
apple wont give me a new phone cause I broke the screen and I replaced it my self.
Correct. When you did that, you voided all warranty/support, & forfeited the right to an out of warranty replacement.
There was nothing wrong with the screen I bought,
And, exactly, how do you know that? Since Apple DOES NOT sell iPhone parts, there is no official source for genuine parts. Thus, many on the market are counterfeit & produce nothing but problems.
Good luck.

HT1430 my iPhone will not send emails. I have checked the settings and reset the phone, it still does not work. Any suggestions? Thanks

If anyone can help I would appreciate it. Mail on my iphone will not send any messages. I have followed the Apple instructions and still it won't work, even after resetting my iphone. My email provider is BT.

To Avoid Relaying:
If you are sending an email from, say, [email protected], but the return address is [email protected], that is relaying (you are using y.com's servers to send an email where the email "originates" from b.com). Many servers don't allow relaying to prevent spamming.
To make this work go into the email account settings, tap the account "button" that has your email address, go to the Advanced section in "Mail" if there is one, then go to "Outgoing Mail Server", tap it, and then tap "Primary Server", and in the Outgoing Mail Server enter your user name and password. It may say optional, but you need this.
Not all services provide this and the sequence of buttons I describe above may not be exactly the same for each address (look around if different). If you can't set the user name and password, then that email service does not provide a way to get around relaying.

HT201210 I tried to update my phone. It does not work at all now. I got the message Could not complete request. The network connection was reset. I have no phone. Please help

I tried to update to the new ios 7 today. I have no phone now. I got the message "could not complete request. The network connection was reset. What is happening. What do I do now?

Apple's servers are probably very busy. You may want to wait for a little while before trying again.

Phone in iphone 5 suddenly does not work

Help! Suddenly the "phone" on my iPhone 5 doesn't work. Worked two hours ago, but now, just says "searching" when I hit a number in recents. Tried using the keyboard and contacts...nothing. Other iPhone features work: Safari, email, all there...except the phone! Any ideas?

Using another phone, I called my daughter, who works at an AT&T call center. She said the same thing: do the "soft" reboot using the Sleep/Wake button and the home button. Leave it off for 5 minutes, which knocks you off the network. Hit the sleep/wake button and the iphone woke up fresh as a daisy and reconnected to the network and now works great! Thanks for getting me started in the right direction!

Re: Clients on Outlook cannot connect - email does not work but OWA does work

Hi all,
Having some weird issues with the exchange server after I sorted out my SSL certs.
So I created my new certs signed by godaddy and now I can connect via OWA without issues.
However connecting via outlook doesn't work and using owa I can see that I can't send or receive emails.
Where can I start looking here?
The weird thing is that doing the test on testconnectivity.microsoft.com it comes up stating that the connectivity on port 443 was successful...
But then further down the page it states the exact opposite - "The specified port is either blocked, not listening, or not producing the expected response"
Thoughts?

Hi,
Before we go further, I’d like to confirm the detail result of your ExRCA test.
And to narrow down the cause, I’d like to confirm the following information:
1. Check your certificate configuration: get-exchangecertifictae |fl
2. Outlook Anywhere configuration: get-outlookanywhere |fl
3. Check Autodiscover service: get-clientaccessserver |fl autodiscoverserviceinternaluri
Directly access the URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Camera connective kit does not work with card reader

Can I only use my USB camer connective kit with my camera and not a card reader?

Which card reader? Are you using an SD card in it or some other form factor?
As long as you're targeting an SD card with photos or movies, it should work same as connecting to a camera....but in that case, there is really no need since the camera kit includes an SD reader.

MIDI keyboard suddenly does not work in logic

Well, I bought a new keyboard over the weekend because guitar center was having its sale.
Thing is, I have already tried it out, and it worked. It is connected to my PreSonus firebox, and I cant for the life of me figure out why it isnt working anymore. It turns on, it plays through the keyboard's internal speakers if I turn the volume up, it is connected to my audio interface, and logic plays tracks through it just fine. The only thing is that my keyboard isnt working as a controller. I have checked all the connections, restarted logic multiple times, and turned everything (except my macbook) off and on. Nothing.
So I went ahead and pulled out my old keyboard which I have not attempted to sell yet, and it didnt work either. So either there is something very simple that I am overlooking, or there is a problem with the MIDI cable, or with the jack on my firebox.
Any ideas? I'm hoping that I'm just being stupid...
Message was edited by: Ravich

Ah, it is a MIDI keyboard without an interface, so you send midi to the Presonus, which I think also has MIDI, right? Is there no setup software for the Presonus?
The fact that your Keyboard doesn't have its' own (USB-) midi interface, means that it will not appear in AMS - the Presonus MIDI ports should show up. You can create the keyboard in AMS though, and cable it to the Presonus MIDI. Just click "Add Device" and fill in the correct info.
And trying a different MIDI cable may be a good idea as well.
And check the Presonus for switches that may be in the wrong position.
That's all I got for you now...
regards, Erik.

PC to Phone connection suddenly does not work

Similar Messages

Maybe you are looking for