Pc turns off after booting on

I am running windows xp ,Barebone MSI 8SI 865 GM2 machine with 2.4 ghz processor .If I start the P.C. by pushing the button on the front of the machine it takes 2 minutes to boot up to the widows come page. After 3 minutes Machine turn off the mains power.
thanks for any help

I agree with stu on this one, sounds like an overheating issue, can you post some further details ?

Similar Messages

Satellite M200 monitor turns Off after boot & battery won't charge

Hello, I'm from Jakarta, Indonesia
I have a problem with my Toshiba Satellite M200 Notebook (Running Windows 7 Home Premium)
after i press the power button to power up my notebook, It works fine showing BIOS and Windows Boot Screen,
but after that my monitor just suddenly turn off when Windows supposed to show login screen.
sometimes the monitor don't turn off, but shows lower resolution (i don't know exactly what resolution, maybe 1024x768 or 800x600, i'm using 1280x800)
so the only thing i can do is press the power button again to shutdown improperly then press the power again to power up, my monitor works normally
try to shutdown then power up again in couple hours later, the problems comes again.
from the moment i install Windows 7, i use 8.15.10.1930 driver version (downloaded from Intel Download Center, which included Intel TV Wizard)
2 days ago my friend said that i should install the driver from Toshiba's support site, so i went to csd.toshiba.com and download the 8.15.10.1825 version from that site (which not included Intel TV Wizard )
my monitor works normally after I installed the driver i've got from csd.toshiba.com, so i think that the problem because Intel TV Wizard somehow messed up with my notebook. But this morning this problem comes again, my monitor just turns off suddenly ..
besides this problem my battery seems like failed to recharge, Windows shows my battery has fully charged, but when i plugged out my AC adapter,
it just remains for 15-20 minutes before my notebook shut down automatically
three months ago i just brought my notebook to local Toshiba Service Center and bought new motherboard to replace my old mobo (which have a VGA issue too!)
there's something i can do (related to Windows or software/driver) or i have to bring my notebook to the service center again?
are they somehow make a wrong wiring when replacing my motherboard?
and am i have to replace my battery pack too?
i've been using this notebook for about a year and half and there's nothing wrong with my battery before replacing the motherboard
any help would be appreciated :D

well, i can't find my model's driver in Toshiba Europe site,
in Satellite M series it only shows M100 and M70 and not including M200
i found http://pc.toshiba-asia.com which covering my region. after choosing my product they give me link to download Windows 7 driver, here's the link
http://support.toshiba-tie.co.jp/windows7/download/Satellite_M200_32_sp.htm
Windows7 Driver | Intel Display Driver | 8.15.10.1825
they have the same driver version (and same size too) with my current driver i've got from csd.toshiba.com
any other ideas besides the driver issue ?

Monitor turns off after boot? macmini

I have a strange display issue.
I am running a dual monitor setup on my 2010 mac mini. It used to work fine but now suddenly the monitor using the minidisplayport won't work right. It just stays turned off.
If I unplug the HDMI monitor and only use the minidisplayport, the connected monitor turns on while the computer boots (grey apple screen), but instead of eventually showing my desktop the monitor just turns off. The computer acts as if nothing is wrong. If i switch the monitor to the hdmi everything looks normal.
Resetting pram makes no difference.
Starting in safemode makes no difference. no picture.
Apple hardware test shows no issue. (The weird thing is, AHT has no problem keeping the minidisplayport -monitor running)

Only the Hdmi monitor shows in systems pref/displays. Ofcause i dont know if anything is going on on the black screen. There is no arrange displays option though.
I only have bad experience contacting apple, so that will be my last option. I have no apple store near by. The mini is still under waranty, but i also think/hope it is just a software issue.

Laptop turns off after 3-4 seconds

Hi there, My Laptop turns off after 3-4 seconds of turning in on. When the battery is plugged in or mains lead, the on /off switch does absolutley nothing. When you open the lid however, it turns the laptop on for 3-4 seconds then cuts out. After taking the laptop appart, i have found that the only way to get the laptop to turn on properly is to take out the power switch chip unit strip cable, insert it so it turns on and then remove it quickly. this way the laptoip stays on. if you insert the power unit strip cable, it turns on fine, but if you leave it in, the laptop turns its self off after 3-4 seconds ( as if the power button was held down) Do you think this is a problem with the either, the power button chip unit, the main board, or maybe even the magnet switch in the lid!? i have upodated bios/cleared CMOS, ran all diagnostics, tried everyt combionation of resetting, e.g. hd/ram/cables /power button down for a minute, bat back in power lead back in...etc, everything installed fine and came back 100% ok as if there is no problem, but the power switch is doing nothing!. Please help or let me know if anyone else had this issue, i really need my laptop working. Kind Regards, James Hardy

Does it do it booting in these two modes?
Safe Boot from the HD, (holding Shift key down at bootup).
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

[SOLVED] USB Harddrive via fstab turned off during Boot - Error

Hello^^
I'm trying to mount my external USB Drive.
I put the following line in fstab:
/dev/sdb1 /media/Musik ext4 noauto,user,default 0 1
I only want to start the Harddive occasionally.
The problem is, when the drive is completly turned off during boot I get the following error:
No such file or directory while trying to open /dev/sdb1
Possibly non existend device?
I thought that the noauto Option should prevent fstab from mounting the hdd???
regards
cl10k
PS: Manual mounting works without any problems...
Last edited by cl10k (2011-03-20 22:49:43)

Let me give you a hand then. The following I have in my /etc/udev/rules.d/11-media-by-label-auto-mount.rules, and what it does is:
-- pick the name of a drive,
-- create a dedicated /media/mountpoint name (certainly, "mountpoint" is replaced by the name of your drive),
-- mount the drive on boot,
-- unmount the drive on shutdown and delete the /media/mountpoint.
KERNEL!="sd[a-z][0-9]", GOTO="media_by_label_auto_mount_end"
# Import FS infos
IMPORT{program}="/sbin/blkid -o udev -p %N"
# Get a label if present, otherwise specify one
ENV{ID_FS_LABEL}!="", ENV{dir_name}="%E{ID_FS_LABEL}"
ENV{ID_FS_LABEL}=="", ENV{dir_name}="usbhd-%k"
# Global mount options
ACTION=="add", ENV{mount_options}="relatime"
# Filesystem-specific mount options
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},utf8,gid=100,umask=002"
# Mount the device
ACTION=="add", RUN+="/bin/mkdir -p /media/%E{dir_name}", RUN+="/bin/mount -o $env{mount_options} /dev/%k /media/%E{dir_name}"
# Clean up after removal
ACTION=="remove", ENV{dir_name}!="", RUN+="/bin/umount -l /media/%E{dir_name}", RUN+="/bin/rmdir /media/%E{dir_name}"
# Exit
LABEL="media_by_label_auto_mount_end"
Plenty of handy examples you can find in /lib/udev/rules.d/ and modify them so they meet you needs. I hope it clarifies the matter a bit.
Last edited by bohoomil (2011-03-19 16:57:36)

Yoga display turns off after 1 minute

I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

My screen darkens after 1 minute and turns off after 3. All of a sudden, now, after the screen shuts down, it comes right back on????

My screen darkens after 1 minute and then turn off after 3 minutes (energy saver). Now, all of a sudden, after it shuts down it comes right on???

thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

Screen turns off after a few minutes and needs to be closed then opened

hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
ross

Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel

For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/

MacBook turns off after the startup bong when trying to restart

Greetings,
When I try to restart my MacBook it turns off after the startup bong.
Thanks

Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
Best of luck.

TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

Did you see my post above?
Have you tried a different set up earbuds to see if that helps?
What about resetting the Shuffle?
Resetting iPod shuffle
B-rock

HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

Hello vijaypatel,
Thanks for the question. The following article outlines the temperature warning that you experienced:
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.

Iphone turns off after a few mn of utilization with the battery full

My iphone 3GS turns off after the battery is fully regenerated. I can only use it a few minutes before it turns off. I have to plug it again to turn it on, and the indicator of charge is around 98 %. The problem does not come from the battery. Has anybody found the same dis-functioning? A solution? Thanks!

More than likely the iPhone has a hardware problem.
If there is an Apple store nearby, make an appointment to have this confirmed.

10.6: Internet Sharing turns off after restart

I use Internet Sharing on my iMac to share the Ethernet connection from my computer wirelessly to my iPod touch. In Leopard, Internet Sharing would turn off after a restart. Snow Leopard fixed the problem for a while, but now it's acting up again. Any help?

Using MacOS X 10.6.2 I have the same problem.
My network configuration is just the other way around (wireless Internet and Ethernet LAN).
Looking this up in Google first, I came across this older support link of Mac OS X 10.2:
http://support.apple.com/kb/TA21168?viewlocale=en_US
The solution provided there is not really helping though.
However, it appears that this is a recurring issue Apple is struggling already longer with. Hope they straighten that out at one point.

Pc turns off after booting on

Similar Messages

Maybe you are looking for