PC UNIT NOT MAINTAINED IN LANGUAGE EN.

Hi,
      I am doing extraction using LIS and when i do initial fill of set up tables using t code oli3 it is saying PC UNIT NOT MAINTAINED IN LANGUAGE EN.
PLEASE TELL ME WHAT NEEDS TO BE DONE .

Hi
If I got your question properly, you need to run the Unit conversions for the UOM try at RSUOM or try with table
T006 at se11.
If you go to the domain MEINS of this data element there is conversion routine CUNIT . In this there are 2 function modules CONVERSION_EXIT_CUNIT_INPUT and CONVERSION_EXIT_CUNIT_OUTPUT . This converts PC into ST and then ST into PC . This function module you can test in SE37 .
Hope it helps and clear

Similar Messages

  • UOM - Not maintained in language EN

    Dear gurus,
    I have created one UOM, which is not availabel in SAP. I used the same for my MIC and did the results entry and UD.I didnot face any problem. But When iam trying to upload inspection plans thru LSMW with the same MIC, system is throwing a message UOM is not maintained in EN language. Pls guide me what  to do.
    Thanks and regards
    Venkat . V

    Venkat,
    First, you should logon in EN to the system and create the unit, otherweise you will get this error.
    Second, do settings here:
    Go to CUNI --> Go to --> translation -->unit of measurement --> Here define your langauage...
    Here select EN to EN
    Hope it solves your problem....
    Thanks!!!

  • Unit not created in language EN

    Hello,
    When loading a flat file, I receive the following error:
    Error in conversion exit
    CONVERSION_EXIT_CUNIT_INPUT
    So then I checked the units of measure in my flat file against the T006A table via SE16 in BW.  When I looked up some of the units of measure, I get the following error:
    Unit is not created in language EN.
    Question:  How do I create the unit of measure in language EN?
    Thanks,
    George

    Neither of the suggested solutions worked. 
    I ran RSDMD_CHECKPRG_ALL from se38 for 0BASE_UOM and 0UNIT.
    I also removed CUNIT from the column CONVE which is next to the UNIT column.
    I am still receiving the same errors as before.
    Any other suggestions?

  • IW32: Error getting message (Text for order header not maintain in lang.EN

    Hello All,
    We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
    We have not done any configuration change in this particular system.
    Can anyone help to resolve this.
    Thanks

    Hi,
    As with most SAP messages it is always a good idea to trust what it is saying.
    The system is telling you that KG has not been created in the English language.
    Go to transaction CUNI to check the settings.
    Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
    KG should be there and should have an English description (the message said it was not there for EN)
    If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then  KG?)
    Steve B

  • No short text maintained in language ZH (please re-maintain material)

    Hi,
    I was trying to create a PO for the material that I have created, however, system prompted that "no short text maintained in language ZH (please re-maintain material" error. Please advise us on how to resolve the error.

    Dear Jacqline,
    This message is because you have not maintain the  language ZH in material master
    Step 1: Go to Tr. code: MM02, enter your material and select few Views and inter
    Step 2: Click the Additional data  field top above
    step 3: Maintail the language ZH and material desciption and save it
    Youe Query will resolve

  • Internal unit GAL, language EN is not maintained

    Hi All,
             i am facing problem with "Internal unit GAL, language EN is not maintained
    Message no. BM302" error while running the report...some one gave solution for this problem..still i am getting same problem ....please any one give explaination about that error why it is coming like that and also solution?
    Regards,
    surendra.

    hi..
         i  check it in that Tcode (S_BCE_68000183 or CUNI )..but it is not there..what can i do now?can any one explain about that problem? it means why it is coming like that?

  • BDC error BM302 : Internal unit &, language & is not maintained

    Hi Experts,
    I have Unit of measurements defined as below in T006A Tables ( Configured through CUNI tcode)
    SPRAS MSEHI MSEH3 MSEH6  MSEHT      MSEHL
    EN        UNT     UNT      UNT       UNIT         Unit
    HU        UNT     DRB      DRB      Darab      Darab
    Through BDC Prpgram  i have created an inforecord ( using ME11 transaction ), where Logon Language = HU. It is created successfully. When i try to open the created info record using ME12, the unit ( EINA-LMEIN) is displayed as '**' and it throws message "Internal unit DRB, language HU is not maintained ". When i Checked in database EINA-LMEIN is saved as '**'.
    But when i create the Info record manually in ME11,  No issues .The database EINA-LMEIN is correctly saved as 'UNT'.  
    I couldn't figure out the issue , whether problem is  in my BDC program or Language dependent configuration of the unit in CUNI. Please help in solving this issue , Am i  missing something ?
    Thanks in advance.
    Regards,
    Murali

    Hi Murali,
    You might be missing some more configuration (T table entries). To determine what that is -
    Process the info-record using ME12
    Start debugging "/h"
    Once debugging starts - place Breakpoint At MESSAGE statement
    F8
    Program control will stop at every message triggered and one of them would be you message. Check the code around the message (and call stack if required) and you might see the reason for the error
    Cheers,
    Aditya

  • Error: In language EN, the internal unit of measure DA is not maintained.

    hi
    i am doing subcontracting operation and when i try to convert the PR into p.o in co02 the system gives this error
    In language EN, the internal unit of measure DA is not maintained.
    how can i solve this error...

    Hi,
    There are couple of things..
    1. PR to PO Creation is not with T.Code: CO02.
    2. It seems you are working on Multi Global environment.
    Ask your Basis Team to do the Language imports for UOM.
    Regards,
    Siva

  • Internal unit HA, language EN is not maintained

    HI,
    I got this error message, what should i do?
    Cheers,
    Nies

    Hi
    Refer  Note 431031 - Internal unit PC, language EN is not maintained.
    It can guide you a bit.
    Regards

  • Internal unit NO, language EN is not maintained

    Dear sir 
          When i am uploading material using  BAPI for MM01 . i am facing the following error...
    Internal unit NO, language EN is not maintained....
    So pls guide me...
    Thanks,
    Meena

    its means that the unit(base measure of unit) 'NO' not maintained in the system.
    check your BUM, it might be wrong entry or you need to maintain the BUM as 'NO' in your system.

  • Error '' Unit IN2 is not created in language EN"

    Hi all, I have created new material using UoM as "2 (square Inch), when i am doing excise Invoice for the same material it is ginving me error that '' Unit IN2 is not created in language EN"  while it is allowing me to do GRN without Exc Invoice.
    i have tried to CUNI , there is no entry showing for  unit of measurement for "2 or IN2 . i tried to maintained is is giving message
    'Unit of measure IN2 already exists'  if i checked table t006A it is showing the Enrty in EN & DE both language,
    i have also teried
    Goto --> translation --> unit of Measurement  but not sure what to do there, i have save confirm translation for the "2 there but still same problem is appearing.
    Please Guide  Any helpful ans will be awarded full marks. thanks

    In what language did you create this new unit?
    when you start CUNI, in the initial screen choose from menu GOTO > Translation  to translate your unit into english language.

  • Error message :PurchOrder : Unit of measure PC not defined for language ES,

    Hello,
    I am facing a problem with PO replication to R/3 backend.
    POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)'  .
    When I check with 'RZ20' transaction I got this message :
    PurchOrder : Unit of measure PC not defined for language ES.
    SRM 4.0 Extended classic scenario
    Regards,
    Shaiek

    Hi
    This seems to be a configuration issue,.
    Pls maintain the unit of measure in configuration using transaction CUNI
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • Unit of measure EA not defined for language PT

    Hello,
    Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
    "Unit of measure EA not defined for language PT"
    Table 006A contains no entry for this unit of measure.
    We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
    Checked  T006A table for "EA" found for language "EN, DE, CN etc. not for "PT"  how to maintain T006A table for Portuguase langauge.
    Regards
    Mahesh Naik

    >
    Mahesh Naik wrote:
    > Hello,
    >
    > Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
    No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Maybe you are looking for

  • How can I create an expandable text field in Acrobat XI?

    I am trying to create a text field that expands with the text that is entered. I have found several forums saying to use subforms, but how do I create those? Does anyone know where I can find a really good turtorial for XI?

  • Do not disconnect message wont go away

    I have the do not disconnect message on my ipod when plugged into my comuter (windows XP). However, the computer says the update is complete. I have reset the ipod several times. Still get the message and when I try and disconnect (by clicking on the

  • IChat and Photobooth effects- Broken! Not all but some

    Okay so these effects work while iChatting and while looking at the screen in Photobooth. When you try to take a picture however, the result is either negative or white. The pictures looks alright up top right after its taken but down below when you

  • Can I log the operations done by the export utility?

    Hi, Is there a way to log the operations done by the export utility? i.e. if someone uses the export tool to export some tables, that info will be stored in a log table and can be viewed later? Thanks!

  • Query Folding for MySQL and PostgreSQL

    Hi there! I use simple M code (see below) but PQ load all rows instead of doing Query Folding. What's wrong? let     Source = MySQL.Database("10.8.0.10", "leb"),     leb_x_sale_orders = Source{[Schema="leb",Item="x_sale_orders"]}[Data],     #"Removed