PC version of MX on iMac using Parallels can't connect with server - HELP!!!

I can connect via Filezilla with no problem, and during the site setup process the TEST SETTINGS says it can connect with my remote server.  But when I attempt to actually connect, it finds the server but cannot seem to establish a connection.  SOMEONE PLEASE HELP!!!!  My settings are all verified from a Windows PC and via Filezilla.....

Thanks for responding so quickly!  Yes, the internet does work through Parallels.  When atempting to log in to the remote server, it finds the host, but then hangs up during the connect phase.  However when I set up the site, and test the settings it says it can connect with no probem...

Similar Messages

  • HT4623 How to use epson iprint after connected with iPad help

    How to use epson iprint after connected with iPad help.

    When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).

  • IMac G4 suddenly can't connect with Airport -- password not recognized

    I have an iMac G4 running OS X 10.4.11 with an airport card installed that until recently connected with an Airport Extreme base station in the next room. Recently, the connection fell out, and when I try to reconnect with the network, it says it won't recognize my password. (We use WPA2 personal security.) This failure occurs even though my iPad can hook up, as can my wife's G5 and her iPad. There was a problem with an Extreme router, but my wife reset that, and when she did she used the same password that we've always used. So, in essence, my G4 is the only piece of equipment that can't talk on the network.
    An Apple helpline person said he suspects my computer is just getting old; it's around 7 years old now. I'd hate to think that's the case. Could this be a hardware and not a software problem? Any suggestions of what to do?

    I suspect that that "Apple helpline person" is just getting lazy...
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense.  They're also tailored to OS X 10.5 and 10.6, but they should work with OS X 10.4.
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • I keep getting message can't connect with server when using facebook

    How can this be corrected have tried uninstalling facebook and reinstalling but keeps happening?

    When I get this, I typically go to yahoo.com or google.com and see if they are working.  If they are working, it could be that the website you are trying to reach is having problems.  If it's not working on any websites, check your internet connection.  If you are on WI-FI, I get this sometimes where the connection drops and I just click on the WI-FI button on top right to refresh. 

  • How do you install Windows 7 OEM on iMac using Parallels 8 Desktop for Mac

    I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding. and trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?

    Geo94 wrote:
    I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding.
    Utter nonsense.
    trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?
    Just use the defaults. Windows 7 is very slow and really RAM-hungry. You will need 8 GB of RAM on your Mac because Windows 7 needs 2 GB all by itself. Even with that, it runs twice as slow as Windows XP.
    If you've already spent money, there isn't much you can do at this point. I suggest using Apple Pages and, when you are ready to submit something to your professor, export it as a Word document and then re-save that Word document as a Word XML doc. I don't know why Pages doesn't export in docx format. It is built into the operating system. I even have a little utility that will save your clipboard directly to docx. You can download a fully-functional demo from: http://www.etresoft.com/pastefiler
    There are many other utilities that can do the same, including Office 2011 itself. I prefer Pages because it supports modern OS X technologies and is much faster and easier to use than Word, but Pages only exports to DOC, not DOCX. Word is better if you are doing really sophisticated document, but it costs a fair amount money.
    Disclaimer: I may receive some form of compensation, financial or otherwise, from my link.

  • My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

    My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I HAVE THE NEW VERSION OF FIREFOX. I LOVE TO PLAY THE POGO GAMES , I CAN NOT CONNECT TO SERVER. A MESSAGE WOULD APPEAR SAYING LOST CONNECTION. WHAT IS THE PROBLEM?

    I CAN GET INTO THE POGO WEB SITE, BUT CAN NOT LOAD THE GAMES. THE GAME WILL CLOSE AND A MESSAGE WILL APPEAR CAN NOT CONNECT TO SERVER. IT GIVE YOU OTHER OPTIONS, COULD BE BEHIND PROXY OR FIREWALL., MAY BE TO BUSY, PLEASE TRY AGAIN. NONE OF THEM SEEM TO BE THE PROBLEM.HELPPPPPPPPPPPPP

    Which "new version"? Websites think you are using Firefox 3.0.19, which is no longer supported. Maybe your User Agent is "stuck" on that old version?
    http://en.wikipedia.org/wiki/User_Agent
    type '''about:config''' in the URL bar and hit Enter <br />
    ''If you see the warning, you can confirm that you want to access that page.'' <br />
    Filter = '''general.useragent.''' <br />
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
    Then restart Firefox

  • I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

    Dear sir,
                    I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
    Yours faithfully
    Vineesh

    Hello Vineesh
    Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    -Norm G.

  • Help !! I can't connect to server using connection manager

    Hello :
    i hava three machine,i use connection manager on Oracle 8.1.7
    i can't connect to server using connection manager
    1.lsnrctl start (Server)
    2.svmrgrl (Server)
    start (Server)
    3.cmctl start (Middle tier)
    4.sqlplus scott/tiger@test (client)
    ORA-12564
    Please help my!
    ---- CLIENT (sqlnet.ora)
    USE_CMAN = TRUE
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    ---- CLIENT (tnsname.ora)
    (DESCRIPTION =
    (SOURCE_ROUTE = YES)
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-middler)(PORT = 1610))
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
    (CONNECT_DATA =
    (SID = bigbear)
    ---- MIDDLE TIER(cman.ora)
    CMAN = (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = TCP)
    (HOST = orcl-middler)
    (PORT = 1610)
    ---- SERVER (listener.ora)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/8.1.7)
    (SID_NAME = bigbear)
    ---- SERVER (init.ora)
    MTS_DISPATCHERS = "(PROTOCOL = TCP)(DISPATCHERS=10)(MULTIPLE=ON)"
    MTS_MAX_DISPATCHERS=20
    MTS_MAX_SERVERS = 30
    MTS_SERVERS = 10
    MTS_SERVICE = bigbear
    db_name = "bigbear"
    db_domain = intumit.com
    instance_name = bigbear
    service_names = bigbear.intumit.com

    midder tier must config hosts
    because dispatcher have listener information
    midder tier must know ipaddress
    Ex. on midder tier
    /etc/hosts
    192.168.10.1 orcl-middler
    from client to server it's ok

  • I am not able to sign in. Apple TV can't connect to server at this time. Please try later. I am using same ID and password as I do with iTunes. Can someone help me?

    I am not able to sign in. I am getting a message saying Apple TV can't connect to server at this time. Please try again.
    I use the same Apple ID and password as I do with iTunes and have no problems accessing that.
    Can someone help me?

    Unpower it.  If it still  happens on a restart give it time - Apple's servers sometimes have glitches.

  • How can I use oracle 9i to connect with my jsp

    Hi,
    I have a question with my a little final year project. I have been install oracle 9i on Win2000. I also install apache and tomcat on Win98 and it works properly. I am trying to use jsp to develop my homepage and it can be connect with my oracle to retreive information. I'm wondering what steps/configure I need to do?
    Could anyone tell me about this? Thanks
    Amy

    Amy,
    You can look at [url http://otn.oracle.com/sample_code/tech/java/jsps/ojsp/dbaccessjdbc.html]this sample. It provides step by step explanation on how to connect to database using JDBC from a JSP. We use Java Beans in the sample. Download the code and have a look at it.
    Hope this helps.
    Regards,
    Anupama
    [url http://otn.oracle.com/sample_code/]OTN Sample Code

  • I can't connect with using connector

    Hi,
    I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

    Hi Vijith,
    I perform your suggestion and I got an error message.This error message is written below.
    Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: &#39;SAP_LocalSystem&#39;, Attribute: &#39;ConnectionString&#39;. .
    There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
    Error> occured  >Mon May 07 09:18:37,334<    >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
    <RfcGetException
    What's your comment?

  • Can I connect with Database using Session Bean

    Hi,
    I am new to EJB. I have small doubt.
    can I connect with Database using Session Bean.
    Regards,
    Murali.

    Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

Maybe you are looking for

  • Error -10810 when launching applications

    Hi, I have a Core 2 Duo LED screen MacBook Pro that I upgraded to Leopard. I did a clean install, and then imported my settings and documents using the migration assistant. When I try to launch certain applicatons, I get the following error message:

  • Cash Balance Negative

    Hi, We want to control Cash GL account for not allowing negative balance at cumulative balance level. We are not using Cash journal. Is there any possibility to control the cash account(GL)? Thanks in advance

  • I cannot get my emails to come up. I just got a new iPhone 5s

    I just got the new iPhone 5S and I cannot get my emails to load. Please help

  • Discoverer and DAC

    It looks like you are trying to meet the needs of the businesses acquired over the past few years by drastically changing your business intelligence approach. How are Discoverer users going to fit into the new scheme of things. I see questions on Dis

  • IPhone won't charge, won't sync, won't do anything...

    My (1 month old) iPhone 3GS won't charge. Not via USB, or mains adapter. It just flashes up the "battery almost empty please charge me" icon even when plugged in. When plugged into the computer a message comes up "USB Over Current Notice. A USB devic