PC w/ system 7. PS Elements8. Need cost and directions for upgrading to latest version.

My pc runs system 7. I use PS Elements 8. I want to upgrade elements to the latest version. My questions are: Do I need to take system 8 out before installing the upgrade? Is there any known problems with this particular upgrade? What is the cost? Thx so much.

If you go to the product page in the Adobe web site (http://www.adobe.com/products/photoshop-elements.html) you can see the pricing for purchasing the latest version of PSE. If you live in the US, there is currently a special where you can buy the full version for less than the upgrade version... or at least that's what I see.
You can remove the old version before installing the new one, but if you do purchase the upgrade, you will need the serial number from the old version to validate the upgrade installation (doesn't make sense to buy the upgrade though if the pricing is as I saw).

Similar Messages

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us

What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
How would one go about arranging for such service?
Why is it impossible to contact a real human for support, either via online chat or phone?

Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely.

Error in CK11n - The system could not determine a cost component split for

Hi All,
When i run CK11n i have following error:
The system could not determine a cost component split for the internal activity with activity type 502000 of cost center 10100.
Procedure
Check the master data for activity type 502000 of cost center 10100. It is possible that no activity price calculation has been carried out for the cost center.
could any one give me solution
Thanking you.

Well, did you run activity price calculation for the relevant cost center(s)?
The CCS you're using for product costing (either your COGM split, or the auxillary) has been marked as a "primary" cost component split. It wants to break secondary costs down into their cost components, and assign those components to components in its own structure.
Wihout a planned CCS for the activity, this isn't possible. (This is normally calculated by KSPI during planning.)
Either calculate an activity CCS is KSPI, assuming that all the prerequisites are in place for that, or uncheck the "primary cost component split" indicator in your costing variant configuration.

Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

I have a Curve 8300. With OS v4.5.0.81. And I am on a BB Social network plan through my cell providor "Fido".
I mainly use it for Facebook & Twitter and have no problems using either app. However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update. Just decided to update today at home where I do have wifi. However when I go to do the update, it gives me the following error:
"Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
I have scoured for answers but haven't had much luck. I tried checking for OS updates. I apparently have the most current one that my phone will support. I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone. Got the same error. Tried reinstalling it through app world, it installed just fine. However it installed the version that I had previously had. So I went to twitter's settings and checked for updates. It prompted for one as I expected it would. And when I tried to get the update. It gave me that error again. I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps. Is it a software compatability issue? Is it a hardware compatability issue? Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HT1338 I just got my new iphone 5 and had to upgrade my mac (version 10.5.8) version of i tunes. Trying to install and it says i need 10.6.8 or later. What can I do to get this phone installed?

I just got my new iphone 5 and had to upgrade my mac (version 10.5.8) version of i tunes. Trying to install and it says i need 10.6.8 or later. What can I do to get this phone installed?

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an Update for a newer version of my op.sys. software, or, what is a better choice of an Upgrade?

my PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an UpDate to a newer version of my op.sys. software, Or, what is a better choice of an UpGrade to a newer/different op.sys. software ?
Thanx!

The best maintained PowerPC browser at the moment is TenFourFox:
http://www.floodgap.com/software/tenfourfox/
It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
FYI: Speed-up for TenFourFox on PowerPC

Costs and revenues for service contracts

Hello,
Does anyone know a transaction where you can retreive a simple overview of the costs and revenues for contracts (contract type WV Service and Maint.)? Within transaction VA43 there is a cost report but that report only lists only the data of the processed contract.
Sebastiaan Bakker

Hi,
Check out the following site for your querry.
http://help.sap.com/saphelp_nw04/helpdata/en/3c/aba8e6413911d1893d0000e8323c4f/frameset.htm
regards,
Siddharth.

TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

Welcome to the Apple Community.
You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

I need indesign and Photoshop for my final year of university

I need indesign and Photoshop for my final year of university and possible after when i have graduated. Are there are any monthly pay plans available instead of the upfront payment of hundreds of pounds as i simply cannot afford that as a student.
Any help would be great thank you , as i am a little confused with all of the plans and options online.
I want to buy photoshop and indesign so that they will permanently be on my laptop not only for a period of time.

Creative Suite 6
Beyond that there is no way to selectively just get ID and PS for student pricing, but you could of course get them on separate commercial single-app plans. Either way, it's a catch 22...
Mylenium

I have OSX 10.6.8 and i am told i need 10.7.4 to get the latest version of imovie how do I go about this?

I have an iMac running OSX 10.6.8. I currently have iMovie version 8.0.6 and would like to upgrade iMovie to iMovie 11
I am told I need Mac OSX Version 10.7.4. How do I go about upgrading the operating system.
Many Thanks

Not so. iMovie 11 works fine with Snow Leopard.
As for upgrading your operating system:
You can purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

How to setup MM costing and drive for new parts before ECM release key is triggered?

Hi,
I am on the engineering side of SAP ERP where I create new materials, BOMs, etc. We do this with a change master without release key today. We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM). The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production. There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed. Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
Thanks,
Joseph

the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

HT1386 I did a system restore on my computer. When I had it up and running I downloaded the latest version of itunes. Now I can't sync any new apps to my ipods. What may be the problem?

I did a system restore on my computer. When I had it up and running again, I downloaded the latest version of itunes. Now I can't sync apps to my sons ipod. What can I do to fix this?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

Need IDOC and segment for mappping the sales order number

Hi,
we need the IDOC name and segment for mapping the sales order number created by oracle in sap for transaction VA01.
Whether the sales order number created by Oracle can be used to create the sales order in sap using the idoc ACC_SALES_ORDER01?
. If we can do,then what is the segment and field for the sales order number in the idoc ?
Please reply asap it's very urgent
Thanks
Edited by: suresh kumar nandhagopal on May 16, 2008 12:07 PM

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

For abap-hr i need datatype and length for the fields which i selected

hi seniors,
      I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
      I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.

Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME        PA0001
FIELDNAME     PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
    TABNAME              = 'PA0001'
*   FIELDNAME            = ' '
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
*   DO_NOT_WRITE         = ' '
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = MY_DFIES_TAB
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3.
Hope this was of some help.
Best regards,
Sagar.

PC w/ system 7. PS Elements8. Need cost and directions for upgrading to latest version.

Similar Messages

Maybe you are looking for