PC will not automatically repair itself

When I turn on my PC, it goes to a screen that says it cannot repair itself. I am no longer under warranty and the person I talked to said I needed to ask for troubleshooting help.

Hi dria1995,
Welcome to Sony Community!
Can you provide us the exact model name and the current operating system of your unit so I can check the specifications and provide you accurate solutions.
Thanks,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

10.9.2 upgrade and now wifi will not automatically reconnect after wake from sleep

I upgraded to 10.9.2 on my mid-2012 Macbook air and now when i wake the laptop from sleep the wifi will not automatically reconnect. I have to physically click on my network to re-join it.

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. Reinstall OS X.

Adobe did not automaticly attach itself to a tab in my microsoft programs durnig the instal. Can anyone tell me how to manualy get Adobe acrobat 10 to create an Adobe tab in my Microsoft programs? IE:Outlook, Word, Excel??

Adobe did not automaticly attach itself to a tab in my microsoft programs durnig the instal. Can anyone tell me how to manualy get Adobe acrobat 10 to create an Adobe tab in my Microsoft programs? IE:Outlook, Word, Excel??

Thank you for your response. Yes I do have office 2013 and From reading forums it appears I might be out of luck to get the add in tab. I can still print to it so I will adapt and move on.
Again thanks for your help.

Computer will not automatically log into AirPort Network

I have a MacBook Air, running OS 10.7.5. It will not automatically log into my AirPort Extreme, running Version 7.7.2 (I have to affirmitevely go in and choose my network every time I wake the computer up or open it). Another computer in my home, a Toshiba, has the same issue.
The Mac will automatically log in to other networks that I regualrly use (e.g., at work and at friends houses), and the default on the Mac is set for automatic LogIn.
The iPhones in my home do not have this issue.
Any suggestions?

You're not alone.
I've had this problem since I unwrapped my brand new Mac Pro.
Even a clean install didn't cure it.
Read this thread; http://discussions.apple.com/thread.jspa?threadID=1284484&tstart=0
My 'cure', which has yet to prove itself over 24hrs, is to:
Set up a New Location in System Prefs / Network.
Deactivate all other connectivity options (Ethernet/BT/FW) bar AirPort.
Move AirPort to the top of the list.
Uncheck the 'Ask to join new networks' and 'Show AirPort Status in Menu Bar' checkboxes.
Apply settings.
I'll discover whether it works tomorrow morning, when I wake up my Mac.

Client (an internet radio) will not automatically connect

Trying to install an internet radio Sagecom RM 50 on my intel mac lion with a time capsule. It will not connect automatically. I can connect using a pin and inputting the MAC, but when turning the radio off , it will not reconnect automatically. The radio works perfect on my office system with a thompson router and windows xp. Any ideas?

Sorry I haven't fully explained. First time I have joined a forum for assistance.
The Sagemcom RM50 is a wireless only internet radio and should connect automatically to your network after it scans for available networks and you input the encryption key. It works as advertised with my work router and windows xp system. I checked it at work for troubleshooting only to ensure that there was not a problem with the radio.
I want to use this at home, but it does not connect automatically with my TC and imac. It recognizes both my normal and guest networks. I am able to input the encryption key with no faults, but it just continues attempting to connect with no error codes. The only way I have been able to connect is by "add wireless client" manually from the airport utility. This is where there is an option to use a PIN. The PIN is generated from the radio itself. The radio MAC address is then found and the connection established with no further problems. (There is also an option for "connect on first attempt" but this does not work.) According to the airport utility documentation after you have added a wireless client, it should reconnect without a password.
The problem is that when you turn the radion off and back on the radio will not automatically reconnect.
We have 6 or 7 other wi-fi devises (both apple and non-apple) that have never given this sort of problem.
It appears that the TC or OS is not saving or recognizing the radio MAC address when you turn it on. It just continues attempting to connect. I'm pretty certain at this point there is something blocking the wireless connection attempt and that a setting needs to be revised to allow the radio to connect and an IP address provided.
Any assistance would be greatly appreciated.

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.

It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

My iPhone 5 will not automatically connect to my home wifi

My wifes iPhone 5 will not automatically connect to our home wifi, she has to log in each time (she has ios 6.1.4). Mine, however will connect automatically with no issues (we have same phone and ios). Here is what I have done so far to fix the issue and none have worked:
* I have reboted (hold home button and sleep/wake button)
* I have reset the network connections
* I have turned "ask to join" on, connected to the network, turned wifi off and then back on, it did not connect to the wifi
* I have manually connected to the network through the manual option, turned wifi off and then back on, it did not connect to the wifi
* I have erased all content and data and resored the backup from iTunes
* I have restored iPhone from iTunes and restored the backup from iTunes
My phone does not list a "forget this network" as an option on the wifi connection when I pull it up, so this is not an option. So, what else is there to fix the issue?

Hi there Huskerscott!
I have some information here that can help you troubleshoot this issue:
Unable to automatically connect to Wi-Fi
Avoid giving your Wi-Fi network a common name.
Some wireless routers are preconfigured with a common SSID (network name) such as "wireless" or "default."
If your desired Wi-Fi network has a common SSID, try changing the SSID to something unique2.
If your desired Wi-Fi network has a unique SSID, reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Which is taken from this article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
It also may be helpful to follow these settings, which are optimal for use with iOS and OS X devices:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If i download a picture on on an app, it will not automatically save it to my camera roll as it used to do, nor does it save any image

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If I take a picture on Instagram, it will not automatically save it to my camera roll as it used to do, nor does it save any image, I just want it fixed.

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

I have been transfering info to an external hard drive and when I try and trash contents off my computor i get the message it will not continue with the message SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free u

I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?

Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US

Permissions repair: SUID file system/library/coreservices/remotemanagement/ARDAgent/contents/MacOS/ARDAgent has been modified and will not be repaired

I have a mid 2007 iMac running OS Mavericks and the hard drive is failing. When doing a disk permissions verify it shows SUID file system/library/coreservices/remotemanagement/ARDAgent/contents/MacOS/ARDAgent has been modified and will not be repaired. I do not have a backup of my system due to my external drive I use for backing up my system has stopped working. Can I repair this myself without having to reinstall the OS so I don't loose my any of my files.

You can safely ignore that.
Disk Utility's Repair Disk Permissions messages you can safely ignore

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Ipad will not automatically set date and time

My ipad drained and when I recharged it the date read 31 Dec 1970. Now it will not automatically connect and update the date and time, and cannot connect to itunes. I can recieve emails on this device but I can's send emails. So it must have some kind of connectivity...would appreciate any comments or help. Very frustrated.

Try resetting it. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

Why will images will not automatically load in apple mail despite having the setting turned on correctly

I have had this ongoing problem. I cannot get images to automatically load in mail. Instead I always have to click the load images button. I click on a message, click load images, the images load. I click on another message, then back to the message with the images and have to reload them.
In preferneces I have turned the View>Load remote HTML images on and off and on again, and rebotted multiple times. It makes no difference. The images do not load.
I checked Little Snitch, but all ports are open.
My firewall is set to let everything connect to mail. Even just turning off the firewall does not solve the problem.
I tried removing com.apple.mail.plist but that did not work either.
This problem occurs in Mail on a MacBook Pro and on a MacBook Air both using the newest version of OS Mountain Lion. The problem happened in OS Lion as well.
The senders are in my contacts, so that doesn't help either.
This is not an issue with the serve sending the images. The images load if I click load images. They just will not automatically laod.
I've read tons of posts but no one seems to know how to solve the problem.
Does anyone have any other ideas?

I am not sure how to link these discussions, so below I am pasting the post that helped me. And here is the link:
https://discussions.apple.com/message/15733241#15733241
louse101
Jul 25, 2011 3:17 AM
This is not a problem specific to Lion, but most recent OS X versions. Regularly I receive email formatted as HTML, which includes JPEG images embedded within them. These images are technically attachments, and as such, Mail.app displays them as a placeholder. Other mail apps will display these images inline, regardless of them being an attachment, remote image or otherwise.
How can I make these images load automatically?
MacBook, Unibody, Mac OS X (10.7), 750GB, 7200RPM WD HDD, 4GB RAM
This solved my question by louse101 on Jul 26, 2011 3:47 AM
No-one replied, but I found a solution on another board. Run Terminal (do a Spotlight search if you don't know where to find this), and type:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool false
This will force Mail not to disable inline attachment viewing. Obviously, to reverse this, simple replace 'false' at the end with 'true'.
See the answer in context

PC will not automatically connect to wireless network on startup...

Hi all - I have a WRTG54 wirless router with the latest firmware. Windows XP Home SP2. I have a mixed network with two wired PCs and one wireless. The wireless PC will not automatically connect to the network. To connect to the network i have to go to the wireless network properties box and check "let windows automatically configure network" Once I do this the wirelss PC connects with no problem. Unfortunatley, whenever i turn the PC off and turn it back on the "let windows automatically configure network" is unchecked and i have to go through the process of checking it again. I uninstalled the wireless adapter and reinstalled the drivers only and then ran the windows wireless setup wizard but the problem persists. Any help on this would be much appreciated.!!!! Thanks!!

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Do not let "Windows automatically configure your network". Instead do the following:
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. It should connect automatically. If you still have trouble, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps.
Some users have reported improved wireless connections by switching to WPA ( = WPA with TKIP) encryption.

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

PC will not automatically repair itself

Similar Messages

Maybe you are looking for