Pc will turn on, but nothing responds.

My computer  will turn on, but the monitor, keyboard, and mouse do not respond at all. I can't do anything to try and fix It. I booted it once and it tried to do an automatic repair, but then the screen went black and nothing after that. I have tried unplugging everything, and waiting a while, but I still get nothing.
Any help would be greatful.

Hello @klock01,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer will power on, but the display is blank and the peripheral devices do not respond. I would be happy to assist you in this matter!
To enable the responsiveness of your mouse and keyboard, as well as the display, I recommend following the steps in this document on Computer Does Not Start (Windows 8).
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Ipod will turn on but nothing appears on screen

    ok, so i bought a ipod on ebay the other day! when i got it i charged and turned it on,the backlight of the screen turned on and that was it~there was nothing else! i can here the click wheel but thats it! what can i do to fix it! help me

    Hi, I got the same problem. Its a IPod mini and have been using it for the last 8 months. Problem started a couple of week ago. But i can transfer and listen to the songs as i know the order of my playlists on the IPod.

  • Macbook pro will power up but cant log on any user. Buttons on keynoard   work but nothing responds to curser.

    Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

    Have you reset the SMC?
    http://support.apple.com/kb/ht3964

  • My macbook pro will turn on but screen stays black.

    My macbook pro will turn on but screen stays black. There is no sound on start up and keys dont light up. I have done all the resets:
    I disconnected the computer from the power cord, and from all other cables.
    I held down the power button for several seconds to turn off the computer.
    I let it sit 5 minutes.
    I restarted the laptop while holding down the Shift key and nothing happened.
    Holding down Command, Option, P, and R to reset your PRAM and NVRAM
    http://support.apple.com/kb/ht1379The only thing I haven’t tried is “floating” the computer. I’m not ready to heat it up to the melting point.
    I need lots of help!!! any ideas? Its a MacBook Pro 15” or 17.5” about 5 years old. Its about 2 updates behind (OS: Snow Leopard)

    Zane W is giving you good advice.  Take it to an Apple store genius bar and have them examine it for free.  You then will know what the issues are and then can make informed decisions.
    Ciao.

  • So my 2008 MacBook Pro will turn on but the screen is completely black! I'm kinda feeling out, can anyone help me??

    My 2008 MacBook Pro will turn on but the screen is black. It makes the sound when it turns on but nothing afterwards. Can someone plz help me.

    Why not post here https://discussions.apple.com/community/notebooks/macbook_pro
    You are more likely to get an answer

  • Computer turns on but nothing appears on the screen

    Hi,
    I have had this desktop computer for about 2 years. I usually use it almost daily and turn it off at the end of the day. Every few months or so the computer would turn on but nothing would appear on the screen. I would have to hold the power button to turn it off then turn in on a couple times or wait until the next day and the computer would turn on and everything would appear on the screen and work perfectly. Last week, the computer once again turned on but nothing appeared on the screen, except this time, after a week, the computer will now turn on except there is still nothing appearing on the screen. I no longer hear the fans running, however, I hear everything else running as normal. I have unplugged and re-plugged in all the cords multiple times and still, nothing.
    Please help! Thank you.

    Kelly, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My one month old laptop turns on but nothing appears on screen...help

    MMy laptop turns on but nothing appears on the black screen

    Try to launch your Mac in Safe mode by taking these steps:
    - Click on the Apple sign() at the upper left corner of the Desktop, select 'Shut down' from a drop-down menu;
    - Wait until your computer turns off, then press the Power button(⌽);
    - Immediately after you hear the startup tone, press and hold the Shift(⇧) key. It should be held as soon as possible after the startup tone, but not before the tone;
    - Release the Shift(⇧) key when you see a grey Apple sign() and the progress bar below;
    This will force the system to perform several maintenance routines and load essential system software.
    Once you've seen the Desktop
    - Open Disk Utility application:
    1. Click on Finder at the bottom of your Desktop;
    2. Select Applications folder from Finder's left sidebar and then open Utilities folder (or press Command(⌘)-Shift(⇧)-U), double-click on Disk Utility icon;
    - Choose your main hard drive from the left sidebar ('Macintosh HD', usually);
    - Click on 'Verify Disc' at the bottom right corner, your Mac will perform a diagnostic test. Click on 'Repair Disk' if prompted to fix problems, or follow instructions given on the Disk Utility window;
    - Once the routine finished, click on ""Verify Disc Permissions"", after it's done, click on 'Repair Disc Permissions';
    Wait until it will finish and restart your mac

  • So after i use my iphone and set it down, it shuts down like when my phone is out of battery when i am at like 90%. Then i gotta plug it in and it will turn on but then i have no phone signal. So then i reset it and its fine. Then it happens again. please

    So after i use my iphone and set it down, it shuts down like when my phone is out of battery when i am at like 90%. Then i gotta plug it in and it will turn on but then i have no phone signal. So then i reset it and its fine. Then it happens again. Please Help.

    Hello Joecal18
    Check out the Power/Battery section of the iPhone hardware troubleshooting guide below.  If it continues after that you may need to restore the iPhone and test it as a new device.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Regards,
    -Norm G.

  • Powerbook will turn on but won't get past grey apple screen

    My powerbook will turn on but it will never get to the operating system screen where you enter a password. I don't know what to do and sometimes it will get to the all blue screen but not past that... Any help would be greatly appreciated. Also, is there anyway to get my files off of the laptop regardless? There are 3 weeks until my final exams and I have all my notes on my laptop. Any help is greatly appreciated.

    If you can boot off the installation DVD, then your computer's fine, and there is something broken with the system software.
    You could try re-installing Mac OS X (not a clean install, or an erase-and-install, but just an upgrade of the existing OS), but that may lead to having your apps broken, which may be more work for you.
    Another thing to try is to hold the Shift key down whilst you are booting into the login screen. Doing this will disable the startup of some system extensions and daemons (StartupItems), which may get you going. However, if you can go to the login screen without too much trouble, try logging in with the Shift key down. That will stop Mac OS X from starting up items in your "Login Items" list in the Accounts system preferences.
    This is the most useful tips I can offer short of re-installing Mac OS X on your computer.
    Cheers!
    --tonza

  • I am about to buy and iphone 4, its second hand and is in amazing condition. The only problem is that the 'wi-fi' button doesn't not work. I tried to click on it but nothing responds. Can this be fixed? Should i still purchase it?

    I am about to buy and iphone 4, its second hand and is in amazing condition. The only problem is that the 'wi-fi' button doesn't not work. I tried to click on it but nothing responds. Can this be fixed? Should i still purchase it?

    while you are with the person selling it to you, ask if you can do a complete restore of the software settings->general->reset->reset all
    reboot the phone to factory settings and see if that fixes the problem.  if not, i wouldn't buy it unless they are selling it to you for less than $50.  wifi is crucial for keeping data low and using features like facetime

  • I dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes

    i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!

    so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.

  • My speedlite 600 ex-rt will turn on but it won't fire. Any suggestions?

    My speedlite 600 ex-rt flash will turn on but it won't fire. The batteries work and were fully charged so that was not the problem. It also reads that it is ready to fire but no flash. It's about 1 year old, Is the flash worn out already or can it be fixed?

    Does the test button turn red (I still have no idea why red means ready and green means it's still charging)?  Does it fire a test flash when you push it?  In answer to your question, no, the flash shouldn't be burned out yet, not even close.  Though, if it doesn't fire a test flash then something is wrong.  I know there have been reports of some issues with rechargeables.  So much so that Canon actually contraindicated them in the labeling.  It's nonsense, but still, try fresh alkalines if the test flash isn't working just to be sure.

  • My computer will turn on but my screen is black

    My computer will turn on but my screen is black

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • 30 gb i pod will turn on but switches off

    helllllllpppp please
    my daughters i pod ( bought fgor xmas) will turn on but turns itself off straight away, apparentley the apple icon on screen flashes a couple of times then switches off. this happens every time she tries to switch it on.....please help me

    Connect the iOS device to your computer and restore via iTunes.  Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • My macbook pro will turn on but will not start up.

    My macbook pro ['08 Silver keys] will turn on but will not start up. Screen is black and keyboard is unresponsive, besides power button. Help!

    ugh, no chime is not good, as that means it is not getting past the firmware POST phase.  Is the sleep light blinking fast?
    One thing to try is to access the RAM slots, remove, then replace and reseat the RAM.
    http://support.apple.com/kb/TS1365?viewlocale=en_US

Maybe you are looking for

  • I cannot install Adobe Air on vista

    I couldn't install the latest upgrade, so i uninstalled Adobe Air and tried to reinstall, but similar to other people in this forum i get the message 'an error occurred while installing Adobe Air. Installation may not be allowed by your administartor

  • SAP Sol Man 4.0 Config guide

    Can some one tell me where i can find SAP Solution Manager 4.0 config guide? Also can some one send me any material for Sol Man certification exam. will reward points thanks PR

  • Instance of Abstract class

    Hello friends I know that abstract class cannot be instanciated but then I really wonder how Calendar class gets instanciated.. Calendar class is a abstract class but it has a method getInstance(). How it might have been done in Calendar class when i

  • Extended display cursors

    How do I move the cursor between screens in extended display? Mine will move to the extended screen but not move back.

  • Re: JEditorPane WIth HTML Table

    hello, use editorPane.dump(System.out); to know if tables are in your document. If yes, there is a graphical problem (in view classes) What is exactly the problem (exception, not drawn, drawing but not what you want...) ?