PC (Windows) slows down by 90% while bonjour is installed

For about two weeks, after i installed Apple Quicktime (don't need iTunes, do not want iTunes) My computer slowed down, by about 90% (it took 30+ min to open Mozilla Firefox, i timed it) and CPU usage would NOT go above 15%
AS SOON AS I UNINSTALED BONJOUR THE COMPUTER WENT BACK UP TO A NORMAL LEVEL OF SPEED
I changed nothing else but bonjour and worked in correcting the problem
Any thoughts as to why this occurred?

http://www.google.com/search?num=100&hl=en&client=firefox-a&rls=org.mozilla%3Aen -US%3Aofficial&hs=NS9&q=Bonjourspywareslow&btnG=Search
*Google search for "Bonjour spyware slow" (68,100 hits)*
http://blogs.adobe.com/jnack/2007/01/cs3doesntinst.html
*READ THE COMMENTS*
Google search for "Bonjour spyware" returned 371,000 hits

Similar Messages

Safari is slow to open and close. It also slows down other apps while running. Should I reload safari and if so, how do I do so?

Safari is slow to open and close. It also slows down other apps while it is running. How can I resolve this issue?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If there's no improvement, continue as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Computer slows down after a while of usage

I just purchased a new Mac Mini (the one with no optical drive) & I noitce after a while of usage it starts slowing down. The most mundane tasks can take minutes (like closing a window) when it goes into its "slow down" mode. It's like it's moving through molassis. Before this, I had a Macbook laptop & I never had slow downs like this. I would have thought "newer technology" would translate into better but not worse functioning. I have 4 gig of ram. I do use Photoshop, which is a ram hog. But like I said, I had this same configuration with the Macbook & no problems. What has changed other than the computer to the Mac Mini. Any thoughts on how I might remedy this? Thanks.

I too am having that same issue and I have had mine only a week. Mine is the bare minimum ordered for the new release.

Ftp slows down after a while

Hello,
since a while now my ftp connection slows down after transferring approximately 400MB. It goes down from 2,6Gbits/sec to 200kbits/sec. When it happens my mouse doesn't go fluid anymore.
Somebody an idea?
Regards,
Roel

Hello,
I upload to my xbox, I don't have anything to upload to. Iwill try with a network cable instead of wireless, maybe it' my wireless?
My pc is an sempron 1800 with 512MB ram. Never had problems with uploading before.
Thanks

PC slows down after a while when running labview application

I have a labview 6 application which is monitoring some data on a feildpoint module, after a while this application slows down and there is a lot of activity on the hard disk drive, also the cpu monitor says 100% activity.
Is it something to do with the PC or is it some other reason?
Thanks
Allan

Allan,
My first guess is "Who know's" without seing your VI and probing around; but, to get you started, run your VI and use Labview's tool "Profile VIs..." [Tools... Advanced...] and monitor memory and timing statistics. You may find a constantly increasing use of memory or a VI that consumes an unusual amound of processor time. Then you can troubleshoot from there.
Good luck with it, Doug

Server slows down after a while

Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.UNIXProcessForker.run(Native Method)
 at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
 at java.lang.UNIXProcessReaper.run(Native Method)
 at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
 at java.net.PlainSocketImpl.socketAccept(Native Method)
 at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
 at java.net.ServerSocket.implAccept(ServerSocket.java:243)
 at java.net.ServerSocket.accept(ServerSocket.java:222)
 at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.util.TimerThread.mainLoop(Timer.java:432)
 at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting on
monitor [0xbc5ff000..0xbc5ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting on
monitor [0xbc7ff000..0xbc7ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting on
monitor [0xbc9ff000..0xbc9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
 at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
 at java.lang.Thread.sleep(Native Method)
 at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
 at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
 at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
 at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

There are several threads like the one below. I would think that they are the
problem. But I don't know what they are doing - doesn't look like any application
code.
Mike
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38 nid=0x5a9f
runnable [0xbe3ff000..0xbe3ff8c0] at java.net.SocketInputStream.socketRead(Native
Method) at java.net.SocketInputStream.read(SocketInputStream.java:86) at weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
) at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24) at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
============================================================
Daniel Hoppe <[email protected]> wrote:
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after
a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering
if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.UNIXProcessForker.run(Native Method)
 at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
 at java.lang.UNIXProcessReaper.run(Native Method)
 at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
 at java.net.PlainSocketImpl.socketAccept(Native Method)
 at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
 at java.net.ServerSocket.implAccept(ServerSocket.java:243)
 at java.net.ServerSocket.accept(ServerSocket.java:222)
 at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.util.TimerThread.mainLoop(Timer.java:432)
 at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting
on
monitor [0xbc5ff000..0xbc5ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting
on
monitor [0xbc7ff000..0xbc7ff8c0]
 at java.lang.Object.wait(Native Method)
 at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
 at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
 at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting
on
monitor [0xbc9ff000..0xbc9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
 at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
 at java.net.SocketInputStream.socketRead(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:86)
 at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
 at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
 at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
 at java.lang.Thread.sleep(Native Method)
 at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
 at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
 at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
 at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
 at java.lang.Object.wait(Native Method)
 at java.lang.Object.wait(Object.java:420)
 at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
 at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

Imovie slows down then freezes while importing from camera

I am trying to import a movie from my canon hv10. I've never had problem the last 2 movies I did. but this time around it starts importing, and a few clips later, slows down to 1/8th time. then freezes. The camera is still playing but it has stopped importing. I have tried to pause it to let it catch up. Restarting it numerous times. It is being imported into my 500 GB hard drive. I have 400 GB available. It's worked before in HD. Any ideas? anything would be helpful, I've searched every single message board so far. thanks.

I had a smilar problem. it came up when I changed OS to Leopard OS X 10.5.
My Imovie HD 5 had been working fine until then under earlier OS versions, both in LP as well as in normal mode. Then all of a sudden importing stopped eery few seconds.
I checked many discussions in this forum and tried a lot of suggested solutions, to no avail. I have now come to realise that Leopard is the problem, not the camera, the cable, or preferences or good old iMovie HD.
I simply went back to an older laptop (iBook) running OS 10.3.9 and iMovie 3 . No problem whatsoever importing clips (just had to start a new project about every 20 minutes of clip import). Then attached my external harddrive via firewire, copied the projects to the Hard Disk and then opened them with iMovie HD 5 and bingo: the project was OK and could be further worked on.
So that does not solve the basic problem, but is not too complicated as workaround.

Why does my data logging program slow down after a while?

A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.

Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117

Tempo of music slows down after a while when using IPod Shuffle

I started running with my IPod shuffle,
and I noticed this glitch, that everytime that I go running,
after a couple of minutes (5-10 minutes), the music starts slowing down,
and let me say that the battery was full when this happened.
help please?

I think so, This IPOD is not exercise friendly, I had exchanged my earphones twice, and used a set of earphones without the controls, after 20 min in a run the thing just stopped, I charged it before I left, I think this is a moisture problem.

Internet connection slows down after a while

I have a wrt160n connected to an arris cable modem. When I set it up it works fine - after a period of hours the internet connection slows down a lot. If I then connect my computer directly to the modem it is is fast again. But to get the signal to the router working fast again I have to reset the modem and power cycle the router. Is there a conflict - is my router rationing access or what?

You should download and upgrade/flash your router's firmware...
Download the Firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Airport Time Capsule slows down internet speed while uploading app

Hi All,
Internet speed is going down drastically when I am submitting any iOS app to iTunes Connect.
Previously it was not like this.
I have updated my Macbook Pro to Mavericks and using Airport Time Capsule for wi-fi connection.
Is anyone facing this problem? Any help on this will be very much helpful.

I have almost the exact setup as you, and airtunes never slows down my internet connection.
Has it just happened recently? Have you done a reset on the TC? Make sure you are using the g network, and not in the b only mode.
You can also make sure everything on the network are getting good signal. You can check the signal strength from Airport Utility (in the logs and Stats pane).

JDBC-ODBC Bridge seems to slow down after a while

Hi,
I've got a weird problem going on with an application I'm writing. I hope someone can tell me what I'm doing wrong.
The problem I'm encountering is in he code shown below. The function getAllGamesForATeam is creating a list of items in an ArrayList and passing it back to an Event handler so that I can put it in the session of a servlet. The first time I run this code, it is fast. Fast enough to use on a servlet. The second time it runs, it is MUCH slower...too slow to use on a servlet. The third time it runs, it gets even worse.
I am using the JDBC-ODBC bridge to access my database which is in Access 97. I do have connection pooling enabled on the database. Still it is slow.
If you have any ideas, I would appreciate it. Here's the code:
// GameBean.java
// A class to represent a Game in my College Hockey Program
// Based on Team and League tables.
package MyBeans;
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.servlet.http.*;
* This is the Java bean used to get and display information about
* items for sale in our web based store.
* @version 1.0.0 08/13/2001
* @author Kevin Yetman
* @see DBBeanBase
public class GameBean extends DBBeanBase
* Default constructor, creates an empty {@link GameBean}.
public GameBean()
super();
* Copy constructor. This constructor creates a {@link GameBean} object
* that is initially populated with a copy of the {@link java.util.Map} specified
* as a parameter to this constructor. All {@link java.util.Map} Maps should
* implement a copy constructor.
* @param copyThisMap the {@link Map} used to initialize this {@link GameBean} object.
public GameBean(Map copyThisMap)
super(copyThisMap);
* This constructor creates an {@link GameBean} object and
* populates it with the fields in a {@link java.sql.ResultSet}.
* @param rs The {@link java.sql.ResultSet} object used to populate
* this class with information about an item.
* @throws java.sql.SQLException if there is an error iterating the
* {@link java.sql.ResultSet}.
protected GameBean(ResultSet rs) throws SQLException
super(rs);
* This constructor creates an {@link GameBean} object associated with the
* specified item id. If there is no record in the data source with the
* specified item id, an exception is thrown.
* @param conneciton The {@link java.sql.Connection} object used to execute
* the select statement that will retrieve the item information.
* @param iLeagueId specifies the league id used to populate this object.
* @throws java.sql.SQLException if there is an error selecting the item
* information.
* @throws java.lang.Exception if the item id is invalid.
public GameBean(Connection connection, int iGameId) throws SQLException, Exception
super();
String strSQL="SELECT GameIndex, Month, Day, Year, HomeTeamIndex, VisitorTeamIndex, HomeTeamScoredFirst, LeagueGame, NeutralSiteGame, PlayoffGame, HomeTeamGoals, VisitorTeamGoals FROM Game WHERE GameIndex=" + iGameId;
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery(strSQL);
if (rs.next())
populateFromResultSet(rs);
else
throw new Exception("Invalid game Id: " + iGameId);
putInTeamNames(connection);
* This method returns the league's index.
* @return the league's index.
public void putInTeamNames(Connection connection)
throws SQLException
String strSQL="SELECT TeamName FROM Team WHERE TeamIndex=" + getHomeTeamIndex();
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery(strSQL);
if( rs.next() )
put("HOMETEAMNAME", rs.getString("TeamName"));
strSQL="SELECT TeamName FROM Team WHERE TeamIndex=" + getVisitorTeamIndex();
rs=statement.executeQuery(strSQL);
if( rs.next() )
put("VISITORTEAMNAME", rs.getString("TeamName"));
* This method returns the league's index.
* @return the league's index.
public String getGameIndex()
return get("GAMEINDEX").toString();
* This method returns the name of the league.
* @return the name of the league.
public String getMonth()
return get("MONTH").toString();
* This method returns the name of the league.
* @return the name of the league.
public String getDay()
return get("DAY").toString();
* This method returns the name of the league.
* @return the name of the league.
public String getYear()
return get("YEAR").toString();
* This method returns the name of the league.
* @return the name of the league.
public String getHomeTeamName()
return get("HOMETEAMNAME").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getVisitorTeamName()
return get("VISITORTEAMNAME").toString();
* This method returns the name of the league.
* @return the name of the league.
public String getHomeTeamIndex()
return get("HOMETEAMINDEX").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getVisitorTeamIndex()
return get("VISITORTEAMINDEX").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getLeagueGame()
return get("LEAGUEGAME").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getNeutralSiteGame()
return get("NEUTRALSITEGAME").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getPlayoffGame()
return get("PLAYOFFGAME").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getHomeTeamScoredFirst()
return get("HOMETEAMSCOREDFIRST").toString();
* This method returns the league's nickname.
* @return the league's nickname.
public String getHomeTeamGoals()
return get("HOMETEAMGOALS").toString();
* This method returns the league's automatic bids.
* @return the league's automatic bids.
public String getVisitorTeamGoals()
return get("VISITORTEAMGOALS").toString();
* This method returns a textual representation of this {@link ItemBean}.
* @return a textual representation of this {@link ItemBean}.
public String toString()
StringBuffer sb=new StringBuffer();
sb.append("GameIndex: " + getGameIndex() + "\n");
sb.append("HomeTeamScoredFirst: " + getHomeTeamScoredFirst() + "\n");
sb.append("PlayoffGame: " + getPlayoffGame() + "\n");
sb.append("LeagueGame: " + getLeagueGame() + "\n");
sb.append("NeutralSiteGame: " + getNeutralSiteGame() + "\n");
sb.append("HomeTeamIndex: " + getHomeTeamIndex() + "\n");
sb.append("VisitorTeamIndex: " + getVisitorTeamIndex() + "\n");
sb.append("HomeTeamName: " + getHomeTeamName() + "\n");
sb.append("VisitorTeamName: " + getVisitorTeamName() + "\n");
sb.append("Month: " + getMonth() + "\n");
sb.append("Day: " + getDay() + "\n");
sb.append("Year: " + getYear() + "\n");
return sb.toString();
* This method returns a {@link java.util.Collection} of all of the teams
* in the data source.
* @param connection The {@link java.sql.Connection} object used to execute
* the select statement that will retrieve the teams.
* @return a {@link java.util.Collection} of all of the teams in the data source.
* @throws java.sql.SQLException if there is an error selecting the items.
public static Collection getAllGames(Connection connection) throws SQLException
Collection col=new ArrayList(1100);
String strSQL = "SELECT GameIndex, Month, Day, Year, HomeTeamIndex, VisitorTeamIndex, HomeTeamScoredFirst, LeagueGame, NeutralSiteGame, PlayoffGame, HomeTeamGoals, VisitorTeamGoals FROM Game";
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery(strSQL);
while(rs.next())
GameBean currentGame=new GameBean(rs);
currentGame.putInTeamNames(connection);
col.add(currentGame);
return col;
* This method returns a {@link java.util.Collection} of all of the teams
* in the data source.
* @param connection The {@link java.sql.Connection} object used to execute
* the select statement that will retrieve the teams.
* @return a {@link java.util.Collection} of all of the teams in the data source.
* @throws java.sql.SQLException if there is an error selecting the items.
public static Collection getAllGamesForALeague(Connection connection, String leagueNickName) throws SQLException
Collection col=new ArrayList(500);
String strSQL = "SELECT LeagueIndex FROM League WHERE LeagueNickName='" + leagueNickName + "'";
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery(strSQL);
int leagueIndex=-1;
if( rs.next() )
leagueIndex=rs.getInt("LeagueIndex");
strSQL = "SELECT GameIndex, Month, Day, Year, HomeTeamIndex, VisitorTeamIndex, HomeTeamScoredFirst, LeagueGame, NeutralSiteGame, PlayoffGame, HomeTeamGoals, VisitorTeamGoals FROM Game";
strSQL+=" WHERE (HomeTeamIndex IN (SELECT TeamIndex FROM Team WHERE LeagueIndex=" + leagueIndex + ")) OR";
strSQL+=" (VisitorTeamIndex IN (SELECT TeamIndex FROM Team WHERE LeagueIndex=" + leagueIndex + "))";
strSQL+=" ORDER BY Year, Month, Day";
statement = connection.createStatement();
rs = statement.executeQuery(strSQL);
while(rs.next())
GameBean currentGame=new GameBean(rs);
currentGame.putInTeamNames(connection);
System.out.println(currentGame.getGameIndex());
col.add(currentGame);
return col;
* This method returns a {@link java.util.Collection} of all of the teams
* in the data source.
* @param connection The {@link java.sql.Connection} object used to execute
* the select statement that will retrieve the teams.
* @return a {@link java.util.Collection} of all of the teams in the data source.
* @throws java.sql.SQLException if there is an error selecting the items.
public static Collection getAllGamesForATeam(Connection connection, String teamName)
throws SQLException
Collection col=new ArrayList(50);
String strSQL = "SELECT TeamIndex FROM Team WHERE TeamName='" + teamName + "'";
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery(strSQL);
int teamIndex=-1;
if( rs.next() )
teamIndex=rs.getInt("TeamIndex");
strSQL = "SELECT GameIndex, Month, Day, Year, HomeTeamIndex, VisitorTeamIndex, HomeTeamScoredFirst, LeagueGame, NeutralSiteGame, PlayoffGame, HomeTeamGoals, VisitorTeamGoals FROM Game";
strSQL+=" WHERE (HomeTeamIndex=" + teamIndex + ") OR";
strSQL+=" (VisitorTeamIndex=" + teamIndex + ")";
strSQL+=" ORDER BY Year, Month, Day";
statement = connection.createStatement();
rs = statement.executeQuery(strSQL);
while(rs.next())
GameBean currentGame=new GameBean(rs);
currentGame.putInTeamNames(connection);
col.add(currentGame);
return col;
// The unit test method public static void main(String[] args)
// has been moved to ..\TestPrograms\TestItemBean.java so that this
// class can be used in the package MyBeans.
/////////////////////////////////// END OF FILE //////////////////////////////

Where do you close the ResultSet?
Where do you close the Statement?
Presumably you only create one connection for all users or you close it somewhere.

Windows shuts down desktop manager while updating calendar

I am using Vista / Office 2007 and Desktop Manager v 5 (run in admininsrator mode) with USB connection.    The contacts synchronise OK, but when it moves to the calandar Windows display the Blackberry Desktop Manager has stopped working message - and no solution is available. I have deleted and reinstalled Desk Top manager. Any ideas. Please   Thanks
Solved!
Go to Solution.

Hi and Welcome to the Forums!
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
http://na.blackberry.com/eng/services/desktop/
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Playing footage over network - slow down after a while

Hi everybody, I have ProRes422 footage I work with stored on network. We bought a 12TB NAS and I found, that when I play the edited movie from timeline, it freezes after a while (2-5 minutes) - it seems to me there is some kind of network overload so that the data cannot be transferred fast enough to continue playback. I thought it is problem of the NAS, but I tried to read the footage from external HDD over network and the problem is the same. Would any of you have an idea how to fix this?
Thanks

For users like you who insist on ignoring the warnings and still want to buy cheap, I offer this alternative:
Buy Local Attached Storage, RAID 5, for each work station, a gigabit Ethernet switch, and CAT6 Ethernet cabling.
These days, you can buy 8TB of RAID 5 storage, including the RAID card, for less than $4,000US. The Ethernet6 switch is about $50US and the cabling is cheap.
Buy twice the storage as you think you need, then make file copies via the gigabit Ethernet network of all files on the storage on each computer onto the storage on the other computer. Now, you are maintaining a continuous back up of all data, which is a bonus benefit.
The real benefit, though, is speed. Modern RAID 5 storage systems achieve throughput in excess of 600 MB/sec, far more than 23 MB/sec.
Your investment in new equipment will be far less than buying a SAN.

Waveform charts slowed down control system while loop

Hi
In my application, I have control system which i acquire data, process and output the result. I placed some waveform charts in the while loop where i acquire data, process and output. This made while loop to miss data points( late). Is this because waveform charts store data as time passes?

Waveform charts store data in a history buffer of configurable size. You can change it to a smaller number.
What is the size of the history buffer?
How many charts are you updating in your loop?
What else is happening in your loop?
How are you updating them (wire, local variable, value property, etc).
How fast is your loop rate?
Are your plots simple (thin lines) or fancy (e.g. large dots and thick lines)?
Is autoscaling on or off?
Are the charts set to "synchronous display" by accident?
How many traces are on your chart?
What is your LabVIEW version?
What is your OS?
Do you have overlapping elements on the front panel?
Could you attach a simplified version of your code so we have a better idea what you're actually doing?
LabVIEW Champion . Do more with less code and in less time .

PC (Windows) slows down by 90% while bonjour is installed

Similar Messages

Maybe you are looking for