PC with iTunes wired to 'N' router to AppleTV, using touch 1G remote app

Ok I have the setup above (waiting to buy an Apple TV)
My router is an 'N' wireless type, using Apple TV, if I control it with my iPod touch 1G which uses G wireless will it slow down wireless streaming of movies from the PC?
If so will it not then be better for me to just use the remote control that comes with it?
Also how do I know if he router is running in 'N' mode? does just not having my iPod touch on make it go into 'N' mode?
cheers

Dual band is used to describe the action of channel bonding, which means transmitting over two adjacent channels to double the bandwidth and therefore double the speed of the transmission. If you mean your router can't do this, don't worry it's technically restricted in the UK anyway.
However your router may well still be able to operate over 'g' and 'n' simultaneously in which case my first answer applies.
If however you are saying your router can only operate at 'n' or 'g', then as you appreciate your use of your ipod will require you operate the router at 'g' only, which of course means your tv and itunes can only communicate at 'g' speeds (max theoretical = 54 Mbps). Under normal conditions this should be more than good enough to allow uninterrupted streaming of video from itunes to your tv.
Interference on a network can lower your real transfer speeds and if significant can cause video to stutter, interference can usually be eliminated or at least reduced though.

Similar Messages

  • My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

    My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

    Sign her out and sign yourself in!

  • When I try to use my iphone with itunes it reads that my cannot be used because the apple mobile device service is not started

    When I try to use my iphone with itunes it reads that my iphone cannot used because the apple mobile device service is not started

    See:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • My iphone 5s will not sync with itunes windows, it crashes as it is trying to sync the apps.  Thoughts?

    My iphone 5s will not sync with itunes windows, it crashes as it is trying to sync the apps.  Thoughts?

    How is your iTunes "spacebar" looks like?

  • I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

    Hi all,
    I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
    I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
    Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
    Connecting directly to iTunes using a four digit passcode.
    I've tried both methods, and neither work!
    Here's what happens for each method:
    From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
    From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
    After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
    I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
    I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
    I'm kind of at the end of my rope here. Anyone?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Error with iTunes "The iPod Group Storage cannot be used with iTunes...."

    I bought a usb hub to accomodate my multiple usb devices. I plugged my iPod into this and got the following error:
    "The iPod Group Storage cannot be used with iTunes because it is not formatted properly."
    I plugged the iPod into the computer rather than the hub. Same thing
    Tried to restore, per the error message's direction. It says it has restored it to factory settings, then it brings up that message again.
    I uninstalled and re-installed iTunes. Same thing. It was playing fine but it needs re-charging now and it won't because of the error.
    Does anyone have any ideas? I don't know what to do now.
    Thanks.

    Try to reset your iPod using the recovery mode as described in this support article
    However, this will erase the iPod completely. If you have an iTunes-backup on your computer you can restore your iPod settings later from the backup.
    I have never tried this in WIndows, however. The procedure might be slightly differeent.

  • I tried to sync my iPhone with iTunes, was asked if i wanted to use old phone or new.  I pressed old and lost  recent photos and apps.  what can i do to undo this mess

    An update was requested in my iphone settings to sync my iphone with itunes.  In my attempt to do this, I chose to sync with my old phone and lost all recent photos and apps.  Is there any way to reverse this mess and retrieve what I had?

    So, what i need to is
    1. Check my iphone backup first if avaiable
    2. Do ' restore ' my iphone at itunes
    Is it correct?
    After i do all of this, what is the next step? Is it
    1. Just plug in back my iphone and itunes will automatically sync asking to use a backup ipnone?
    Or need to do manually?
    Make me confuse is, if i do all the step as previous mention, but pc still recognize my iphone as a ipod everytime i plug in into itunes.
    How if i in pc dont have my iphone backup ? Because since first time plug in into itunes, i was used the ipod backup?
    Sorry to ask too much since i really need help from your guys

  • Can I use my 3G iPhone as iTunes server while using the free remote app from another iOS device

    Can I use my 3G iPhone as iTunes server and use the remote app
    with another iOS device

    You should be able to set up numerous IMAP accounts on your iPhone with no problems.
    IMAP will not sync contacts and calendars in your local copy of Outlook.

  • I have 2 accounts with iTunes at same address how do I use both accounts on both my iPad 1 and I pad 2

    I have 2 iTunes accounts at the same address and have 2 iPads 1 and 2 and wish to use both accounts to buy apps for both iPads

    On the iPad you can switch between the two accounts by logging out of one (Settings > Store and tapping the account id on the right-hand side) and then logging in with the other account so that you can then buy with that account. Only one account can be logged in at any one time, so if you are buying apps with two accounts when an app gets an update in the store you will only be able to download that update via the account that originally bought/downloaded it. With the currently logged in account you can also download past app purchases from that account via the Purchased tab at the bottom of the App Store app.
    Similarly on your computer's iTunes you have can both accounts authorised (Store > Authorise This Computer), but only only can be logged in at a time for purchasing new content (Store > Sign Out then Store > Sign In)

  • ITunes account balance $25 with iTunes card but won't let me use it...

    Ok I got 25 bucks in my iTunes account, but when I try to download somthing with my phone it tries to charge it to my debit card which has nothing on it. How can I resolve this problem???

    You had a purchase total of $25.95 but a credit of only $25.00, so the iTunes Store will try to put the extra $.95 on another form of payment before it can process the order. If the card fails, the Store will hold a "balance due". If you redeemed another prepaid card, the amount due would probably be taken out of the total. If you fix the problem with your debit card, the balance due will probably then be automatically billed to the debit card, though I'm not sure.
    I don't know why the iTunes Store isn't accepting your Missouri access card, but it's apparent that it's not an iPhone problem. If nothing on this web page:
    http://www.apple.com/support/itunes/store/creditcard/
    helps, use the form at the bottom of that page to contact the iTunes Store about the problem.

  • I have an iPod touch and iPhone synced with iTunes, however when I connect my iPhone it always downloads the apps from the iPod to the iPhone which I don't want to happen. This is a recent thing and I need to know how to stop this.

    Can anyone help with the problem above?

    With your phone connected, under the Apps tab, remove the check in the box labeled "Automatically Sync New Apps".

  • Problem with iTunes installation - Error Message when trying to use

    I intalled iTunes on my Dell Laptop. The icon is on my Desktop, but when I try to start it, I get the following error message;
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    Then the error message wants me to send some message to microsoft?

    You can't do that.  Instead, just remove "aaa new-model" from the config then try to deploy it.  Alternatively, you can try "merge mode," but that will send the whole config back to the device.

  • Using Touch ID for App store when you have seperate Apple IDs for iCloud and iTunes

    My wife and I each have a new iPhone 5S.  We share the same Apple ID for iTunes and the App Store.
    In addition, we each have our own unique Apple IDs for iCloud.  This enables us to use iMessage to text to each other.
    Can the iPhone 5S be setup to use the Touch ID for iTunes and App store purchases when there are separate iCloud and iTunes ID on the same phone?
    Currently, I can unlock my phone using the Touch ID, but the App store requests me to type the password to my wife's and my shared Apple ID whenever I wish to buy an app.  I am not given the option to use the Touch ID.
    I do have both the iPhone Unlock and iTunes & App Store set to "on" here: Settings > General > Touch ID & Passcode > Touch ID
    How can I use my current setup so I can approve App Store purchases with the Touch ID?

    This is the screen that pops up when I attempt to purchase an app.  It does not allow me to use my Touch ID.

  • I have problems updating my app in the appstore. How should i update using itunes? Currently, i'm unable to use all of my apps.

    I have problems updating my apps in appstore for my IPad. How should i update it using itunes? I'm unable to see all the apps currently.

    Hallo. If all of your apps purchases from the same Apple ID, you can try to update them on iTunes, ways as below:
    iTunes 12 for Windows: Download previous purchases from the iTunes Store
    iTunes 12 for Mac: Download previous purchases from the iTunes Store
    Regards,
    Anson

  • Can I use the iOS remote app to rate iTunes songs on my Mac

    I have the Apple iOS remote app on my iPad I was wondering if I could use this to rate songs as I'm listening to them instead of having to walk to my Mac and and change the rating in iTunes

    An Apple TV has an interface that requires navigation, the alternative was offered to counter the need for your TV (if one was using home sharing they would also need a computer up and running). If the content is being streamed using airplay then you can change the content using your IOS device remotely.
    If that does not work for you, can provide feedback to Apple if you wish.
    http://www.apple.com/feedback/

Maybe you are looking for

  • HP Windows 8 Recovery Failed (Used Recovery Discs)

    Hi. I not sure where to begin. System Info- HP Pavilion g6t-2200 Notebook Windows 8 (64bit) This is my sisters Computer. Her system was running slow so I was going to reinstall the OS using the Recovery Media I ordered for the system. Ive reinstalled

  • Online # not working Australia

    Hi...my online number is not working.  I've checked all the settings, have got the latest skype and I've given it over 24hrs to go through but still not able to have people call me on the online number.  It seems that others have having issues and wo

  • EAP-TLS w/freeradius failing. Phone doesn't present Client certificate.

    Hello, I'm currently on the first phases of deploying a Cisco IPT 802.1X based proof of concept using freeradius, Cisco switching infrastructure (4500's). The requirements are to use EAP-TLS authentication for the phones, and freeradius as Radius Ser

  • Creating design and runtime repositiries in the remote database in OWB 10.2

    Hi, As per my current scenario i have OWB 10.2 installed in a client machine and i have to create target schemas, design repository and runtime repository (control center) in a remote data base.OWB is not installed in this remote data base. Firstly i

  • File retains font info, how can I delete it?

    When I open a file, FontAgent Pro will try and auto-activate fonts that I HAD used on the file, but am no longer. It looks like Photoshop is somehow hanging onto the old font info. Can I delete that information from the file? It is bothersome, becaus