PC with new Hard Drive now thinks my iPod Classic is Mac-Formatted.

My Hard Drive died on my PC, losing all of my iTunes songs. Fortunately, they were backed up on an external hard drive. When my hard drive got replaced on my PC, I downloaded the songs back onto the computer. I loaded up iTunes, which seems to have all of the songs on there. However, when I tried to sync my iPod Classic with iTunes, I get a message saying that:
"iTunes has detected a MacIntosh formatted iPod. You must restore this iPod before you can use it on Windows".
The songs on my iPod are more up to date than what was on my external hard drive, and I worry that restoring the iPod will make me lose everything on the iPod, plus everything that's on iTunes. Is there any way I can sync my iPod with iTunes without losing everything?

Restoring the iPod only wipes all the media from the iPod itself and resets all settings back to their defaults.
You can use a program such as XPlay to allow your Mac formatted iPod to work with your PC.
Xplay
B-rock

Similar Messages

  • Help! My PC with new Hard Drive thinks my iPod Classic is Mac-Formatted.

    My Hard Drive died on my PC, losing all of my iTunes songs. Fortunately, they were backed up on an external hard drive. When my hard drive got replaced on my PC, I downloaded the songs back onto the computer. I loaded up iTunes, which seems to have all of the songs on there. However, when I tried to sync my iPod Classic with iTunes, I get a message saying that:
    "iTunes has detected a MacIntosh formatted iPod. You must restore this iPod before you can use it on Windows".
    I should note that my iPod was originally formatted on an iMac and I had this problem before when I tried to format it on my PC several years ago. I got some feedback on this community on how to do this, but I never saved the feedback, and have no way of finding it.
    The songs on my iPod are more up to date than what was on my external hard drive, and I worry that restoring the iPod will make me lose everything on the iPod, plus everything that's on iTunes. Is there any way I can sync my iPod with iTunes without losing everything?

    See my response to your other post.
    B-rock

  • Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

    My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
    How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

    thetrudz wrote:
    A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
    Hi, and welcome to the forums.
    That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
    Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
    He could do it with Snow Leopard but I am scared.
    If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
    Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
    What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
    See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

  • Computer Crashed, Got New Hard Drive, Trying to Sync iPod

    I recently got an iPod and uploaded hundreds of my albums into it. Shortly after that, my computer crashed, and though I was able to recover a lot of stuff, my iTunes library was decimated. I have a new hard drive now and when I went to add some stuff to my iPod I was told that I had to erase everything from this iPod and replace it with the new stuff because my iPod doesn't recognized this librarly. I guess my iPod is still "synched" with the no longer existing iTunes library lost in the crash.
    Does this mean I can never add anything to my iPod unless I laboriously transfer hundreds of albums again and then add from there? I hope not!
    Any help would be greatly appreciated!
    Frank Palmieri

    Frank,
    Are the songs still on your iPod?
    Copying from iPod to Computer threads...
    http://discussions.apple.com/thread.jspa?threadID=776996&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=805256&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=797432&#797432
    Also these useful internet articles...
    http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
    http://playlistmag.com/help/2005/01/2waystreet/
    iPod: Frequently Asked Questions
    http://docs.info.apple.com/article.html?artnum=60920
    Patrick

  • How can I Replace a Hard Drive on a 160gb iPod Classic?

    How can I Replace a Hard Drive on a 160gb iPod Classic? I am considering buying an iPod Classic off of eBay which is described as 'broken' and having the 'Red X' showing up on the screen. The seller is starting the bid at a very low price, which raises some concerns for me. For this thread, let us assume that the iPod has a broken hard drive that needs to be replaced in order to function properly. I am assuming that merely 'restoring' it would not suffice. How would I be able to replace the hard drive myself, without bringing it in to a store? I have never fixed an iPod's hardware before, nor a computer or any electrical device. I am a novice at such things. Would I be able to fix it myself without wasting money on a broken iPod and new hard drive? Please provide instructions on how to do so =)

    Hello there,
    Yes, the red X icon is usually a sign of a bad or damaged hard drive. Sometimes, restoring the iPod will resolve the issue, but rarely. Other users were able to smack the ipod against the side of their leg and gain back full functionality of the iPod.
    However, if no such luck with either, your next option would be to replace the drive. For this task, you can either opt to repair and replace the hard drive yourself, or opt to send it into a third party repair business to do the job for you.
    I use the guides at [www.ifixit.com|http://www.ifixit.com> to help me replace broken parts on an iPod. These guides provide excellent step-by-step instructions as well as photos on how to repair any part from an iPod.
    Some other good sites for purchasing repair parts include the following:
    [iDemiGods|http://www.idemigods.com>
    [RapidRepair|http://www.rapidrepair.com>
    [iResq|http://www.iresq.com>
    Lastly, I would also like to remind you that ebay also has several great deals on excellent iPod replacement parts. It's where I purchase a majority of mine.
    Hope this helps.
    B-rock

  • Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

    Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
    I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
    My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

    Hello CaptianNike, welcome to the HP Forums.
    I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
    You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
    If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
    Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
    I hope this helps.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Wanting to upgrade Sawtooth 400 with new hard drive and more memory

    Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
    Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
    The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
    The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
    I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
    Thanks for any advice and/or suggestions.

    Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
    Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
    I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
    I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
    Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
    I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
    It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

  • I copied library to a new hard drive, now iphoto won't recognize files.

    I am new to iPhoto, so be gentle. My daughter uses it a lot, and now I seem to have messed up her library. We are using iPhoto 4.0.3. OS 10.4.11
    I installed a new hard drive. I copied the iTunes and iPhoto libraries to the new larger hard drive. I copied the iphoto library to a designated folder (not the default folder). My daughter has now moved the photos into their default location, and advised iPhoto of where to look - User/Daughter/Pictures/iPhoto library. When she opens iPhoto her photos don't appear. When she picks a photo and drops it into iPhoto, the message appears,
    "could not be imported because an unrecognizable type or file may not contain valid data."
    The files are jpegs that open fine in Photoshop, Preview etc.
    I did some reading and saw reference to deleting the file com.apple.iphoto.plist. Tried that, no success.
    I would appreciate your assistance. Like I say, I don't know iPhoto at all. As a second question, I have a G4 with a dual 1.8 processor, what version of iPhoto/iLife should I be looking to upgrade to?
    Thanks for your help.

    "could not be imported because an unrecognizable type or file may not contain valid data."
    That is the standard error you get when you try to import a photo that already resides inside the iPhoto Library folder. It prevents duplication in your library.
    It sounds like you followed the correct procedure, but let's double-check. iPhoto can be run from a location other than the default. When you moved the library, did you copy the whole iPhoto Library folder as one intact unit? How did your dtr point iPhoto to the library? The correct way is to hold down Option while launching, select "Choose (or Find) Library" then navigate to the iPhoto Library folder and Open. Is this what you/she did? If so, perhaps try again?
    As a second question, I have a G4 with a dual 1.8 processor, what version of iPhoto/iLife should I be looking to upgrade to?
    I am very happy with iLife '06 on my 1.4 GHz G4 mini with 1 GB RAM. You could get iLife '08 for iPhoto 7, but be aware that iMovie 7 won't load on your machine because it requires a G5 or Intel machine. I made the decision not to upgrade because I'm happy with my current performance, and I think that the video-intensive and RAM-hog iPhoto 7 would bog down my mini. You can still buy iLife '06 from Amazon.com. See the system requirements:
    http://www.apple.com/ilife/systemrequirements.html
    http://docs.info.apple.com/article.html?artnum=306336
    Regards.

  • Set up issues with new Hard drive

    Hi all,
    I bought a new hard rive for my late 2008 aluminium macbook. I've got it booted and had issues restroing from time machine back up using the REcovery partition. Such research showed this is an issue and said I should just use migration assistant or via the usual set up when rebooting my macbook with the new hard drive in.
    Unfortunately the keyboard does not seem to be responding well of at all and I get stuck part way through the set up process and cant even get to my desktop now.
    Any ideas about what is happening and how to solve this???!!
    Many thanks,
    Greg

    time machine backups are specific to the mac that creates them, since you had the HD replaced the time machine thinks it's a different mac therefore it won't let you "restore" the data to the mac. that is why you have to "migrate" from the time machine backup to restore it.
    this is done either using migration assistant or during the setup assistant (whichever applies in this case)
    if the wireless keyboard is not connecting properly, i would suggest using a USB keyboard and mouse to get the data restored and then go into settings and figure out why it's not connecting correctly.
    following article tells how to migrate from time machine backup:
    http://support.apple.com/kb/HT4500
    hope all goes well for you!

  • SYNCING IPHONE AND ITUNES WITH NEW HARD DRIVE

    My hard drive crashed on my mac book pro and I had to replace it with a new one. I'm trying to get new music onto my iphone that I purchased thru Itunes, but it is saying that only one computer can be used. This is the only computer that I used for the library, but now there is a new hard drive in it. Obviously I do not want to lose the music on my iphone and I'm curious how or if I can get around the message saying that if I want to sync to a new computer that it will erase the prior library. Please advice because I would like to update my iphone as soon as possible.

    Connect the iPhone and choose Transfer Purchases from the dialog box which appears or the File menu in iTunes. Do NOT sync the iPhone until you've completed this task.
    (52902)

  • Recovery discs do not work with new hard drive

    Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality.  I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new.  After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection.  Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks.   HP are most certainly shocking builds from my experience.  Then just last week the hard drive just craps itself and the laptop no longer will boot up.  I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7.  I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message:  "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success.  Tried booting from startup etc and various things suggested on help forums.  Please tell me I am not stuck with this version of windows.  Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

    no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer.  These discs worked perfectly before but now with the new hard drive will not load at all.  I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it.  This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge.  I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

  • ITunes moved to a new hard drive, now acting like a newly installed program

    I just moved my ITunes to an external hard drive and followed all the directions to do so (did a google search and it lead me to this site where I followed the instructions outlined). Now ITunes won't work, it won't access any music whatsoever. In fact when I open ITunes it's appearance is that of the freshly installed program and no songs at all come up under music
    I decided I had to have the space because I only have an 80 GB drive (C) and my music files occupy 52 GB of that (ITunes accounts for 2/3 of that 52GB total for some strange reason)
    The new hard drive (F) is an HP Simple Save and that program backed up all my C drive information (including ITunes).
    Then I followed the instructions I found on this site. I went in, identified the new folder, consolidated the files and nothing. When I restarted ITunes I got the screen above
    So I tried putting ITunes back on the C drive and reset ITunes using the reset button under "Edit, Preferences, Advanced" and that still doesn't work. Not to mention I now have ITunes buried under a mountain of sub folders
    I am at my wits end with ITunes. My first IPod was a gift (my seond I had to buy after washing my first)  but ITunes has been nothing but trouble the whole time and now this!!!!!!!
    Can someone please help me????????????? I like my IPod, I on't want to have to get rid of it and buy an MP3 player that works with Windows

    My Library files are still on the C drive as the instructions said to leave them there
    While it is implied that I can move ITunes music files off my C drive to make more space
    Quote: "If your hard drive is nearly full after loading all your music and other media into iTunes, or if you just want to move all those music and media files to another hard drive on your system, here's a way to make the move while retaining all your playlists, ratings, and play history."
    In fact I now see that ITunes Help seems to suggest something different. I got here by pressing the question mark while in the pop up box for "Edit, Preferences, Advanced"
    Quote:
    "By default, songs and other files you import into iTunes are placed here:
    My Documents/My Music/iTunes/iTunes Media
    Hide
    To change the default location of imported files:
    Choose Edit > Preferences, and click Advanced.
    Click Change and select a new location for your files.
    From now on, new songs and other items you import are stored in the new location. Songs you’ve already imported stay in their current location. (emphasis mine)
    To restore the iTunes Media folder as the default storage location, click Reset (in the Advanced pane of iTunes preferences)."

  • MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

    So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
    So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
    To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
    but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
    Both hard drives have OS X 10.9.4 installed
    If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

    So after switching the internal SATA cables from each computer, now we have
    His computer, with my SATA cable:
    1) Worked with every hard drive!
    My computer, with his SATA cable:
    1) Works with 1 TB Toshiba hard drive
    2) Works with 500 GB Seagate hard drive
    3) Works with my original hard drive
    4) Flashing folder with question mark with his old hard drive
    So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

  • Permission issues with new hard drive

    Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
    Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
    Suggestions???

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Help with new hard drive and data recovery

    I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got  tekserv to recover my data and get a new hard drive and update to 8GB of Ram.  When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive.  I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop.  Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
    1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
    2. my iTunes library is now there but none of my playlists are there.  Should those have been saved somewhere in my iTunes folder that I should see them?  I'm concerned about syncing my iPhone or iPads to iTunes without those there.
    thanks for the help.

    Here's the spec page on your PB.  http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml  It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
    Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
    Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521  http://www.allmac.com/shop/index.php?cPath=5_10003
    After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
    Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
    http://www.apple.com/support/tiger/install/
    You can also download the Tiger Installation and Setup Guide
    http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
     Cheers, Tom

Maybe you are looking for