PC won't recognize WPSM54G HELP!
Greetings. I am trying to reinstall my WPSM54G on my wireless network (via Belkin F6D4230-4 router). I can make it through the steps to set up the print server without any errors, but when I go to set up the PC, it does not pick up the WPS. (PC works fine on wireless). I am using XP.
I went through the the settings on the WPS vis the IP address, and set the SSID and WPA2-PSK settings to match my router. I have also tried disabling the firewall, which did not resolve. I have it set to obtain an IP address automatically. The WPS settings do show my printer in there
I had the WPS working with this printer awhile back, but I cannot swear that it was with this particular router, if that matters.
Appreciate any help or suggestions. This is frustrating...!
You can access the setup page of the WPSM54G. Assign a static IP address to the print server so that it will not change the IP address after reboot.
If your computer is able to ping the IP address of print sever then it is communicating with the print server.
You just need to add a printer port on your computer so that it will print through the print server.
What is the operating system on your computer?
Follow this link to configure printer port on windows Vista computer.
Follow this link to configure printer port on windows 7 computer.
Similar Messages
-
IPod charges, iTunes won't recognize iPod - Help!
my iPod charges when connected to my PC but iTunes will not recognize it (it will not come up in iTunes). as a result, i can't add songs to it, etc. i know my USB port works (both do actually). any advice? thanks in advance.
Hey Rina91!
Have you tried putting your iPod in Disk Mode, then connecting it to your computer again? For more info, read here -> Putting your iPod into Disk Mode
This may be a case of drive letter confusino in Windows. Follow these steps below to try assigning your iPod a different drive letter
Log off of any other users on your computer.
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod drive letter / Changing drive letter
Have you seen all the suggestions in this article, as well? -> iPod appears in Windows, but not in iTunes
See if you have any sucees with those suggetions.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards! -
HELP!!!!!!!!!!!!!!!!! IM DESPERATE!!!!!
Sorry, due to the Terms of Use, problems resulting from a jailbreak can't be discussed here.
You may find help in those forums where they offer tips how to jailbreak iDevices. -
Please Help - My iTunes library won't recognize my iPod classic
My iTunes library won't recognize my iPod classic 80gb. I try doing the trouble shooting steps on apple, but they still did not work. Any help would be greatly appreciated. I'd love to add some newer music to my old iPod for listening in the car or when travelling. Thanks a lot.
Hello dmbnewfie,
Welcome to the Apple Support Communities!
I understand that your iPod classic is not being recognized in iTunes when you connect it to your computer. I know you have tried some troubleshooting on the Apple website as well, but without knowing which steps you have completed, I would suggest working through the attached iPod classic Troubleshooting Assistant.
Apple - Support - iPod - iPod classic Troubleshooting Assistant
Have a great day,
Joe -
My iTunes won't recognize my iPod 3GS!!! HELP! I had recently updated my iTunes and now upon plugging in my iPod iTunes comes up with a error message. Leaving me unable to sync anything! HELP!
What is the exact error message you are receiving?
B-rock -
I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)
Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store -
How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.
Hello and welcome to the support community
As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5. -
i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
helpThat camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you. -
Help please? iTunes and my PC (XP SP3) won't recognize my iPod Touch. I aleady tried the Apple trouble site (recharged iPod; checked USB connections; restarted iPod; restarted PC; reinstalled iTunes; ensured no software conflicts)
Finally got it working.. Ok so First read this
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
Just start with verifying the Apple Mobile Device Support is up and working, Just follow the steps here:
http://support.apple.com/kb/TS1567
After Stopping it and Restarting and it is still not reconizing your device Then start uninstalling
Start with: Itunes, Quicktime, Bonjour, Apple Software Update, Apple Mobile Device.
I had an issue uninstalling Apple Software Update, and was unable to get it off my computer.
But after all that download and reinstall itunes.
After doing all that i was able to get mine to show up in itunes
Hope it helps -
I upgraded from leopard to snow leopard. now iTunes won't recognize my iphone, and the upgrading the software keeps crashing.. help!!
Mountain Lion is OS X 10.8
10.6 was called Snow Leopard.
To use iTunes 10.7 the following is required:
Macintosh System Requirements
Mac computer with an Intel Core processor and 512MB of RAM
OS X version 10.6.8 or later
Safari 4.0.3 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Do you use iTunes Match?
That way all of your songs would be matched with the master song on the iTunes servers independently of iTunes on your Mac or PC...
Look here for further information: http://www.apple.com/itunes/itunes-match/ -
My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!
My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!
When you say you have tried all the help tactics I assume you have tried all the things mentioned here
http://support.apple.com/kb/TS1538 -
i tunes won't recognize my computer. I got a varis and restored my computer to new condition. Now i tunes, amazon, pay pal or e bay won't recognizes my computer. Must sign on as a guest to open aol. Help!!!!!!!
Fix the computer. Find someone competent to do so.
-
My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??
Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H -
I have new MacBook Pro with OS 10.10. My MAIL program was working but suddenly won’t recognize my VERIZON FIOS server. FYI, the MAIL programs on my iPAD and old iMAC continue to work. No answer yet from Apple Support HELP!!!
Additional Information.
On my Mail Accounts setup it was set to "verizon.net" on incoming.
Now it faintly reads, "incoming.yahoo.verizon.net"
This came up automatically .... I did not do it and I cannot change it -
Help! My computer won't recognize my printer!
I'm a college student, and I have tons of papers and files that I need to print. However, my computer won't recognize my printer. It is working and set up, I plugged it into my roommate's computer (a PC) to see if maybe the USB cable was bad; that wasn't the case.
I've tried to manually add the printer, but I don't have any Printer folder whatsoever in Utilities. If I go into System & Preferences, Printers & Fax, and try to click on the Set Up Printers button, nothing happens. I'm at the end of my ropes. Please help!
Also, the .pdf files for a lecture that I need to print aren't working as well; they worked just fine on my roommate's computer, but when I open them with Preview on my iBook, it is just blank. Does anyone know why this is happening?
Please help me, ASAP! Any advice/anything is greatly appreciated! Thank you!need more info:
what kind of printer is it?
do have the drivers for it?
do have the printer setup utility?
what version of the OS do you have?
if you have OSX at least, then :
if you can access the utilities folder, you should be able to find the Printer setup Utility. If you do not have that , the n you need to archive and install :
http://docs.info.apple.com/article.html?artnum=107120
if you do have the Printer Setup Utility, then
open that up, it will open a window called " Printer List"
click on " Add"
- that will open a window called Printer Browser
- if the printer is plugged in and powered on, you will see the printer name listed there.
- select it , then click on " add " in the bottom right
- if you do not see any printer listed in the printer browser, then try a different usb port and try again.
- if you are able to add the printer, then try a test print, it should work with a default driver.
Maybe you are looking for
-
Contacts merged with device that shares the same iTunes account as me
My husband and I share the same itunes account on our phones so whenever he downloads something new it downloads on my phone as well and vice-versa. Just recently, after iOS 6 update, we noticed that his contacts merged with my iPhone & my contacts h
-
Moving Dreamweaver to a new PC
I am about to uninstall DW as I need to replace the HD in my PC due to failures. I have backed up the entire HD to an external HD. When I reinstall DW8 I'd like to be able to copy the site information I've set up in the site manager (about 25 sites)
-
XSD Validation, checking for required elements
I'm using the FTP Adapter to retrieve a flat file in a format like this - H|1|1234|5-APR-2007 L|1|33123|2 L|1|12345|1 L|1|6969|5 S|1|Milton Park, Abingdon, OX142NF I have generated an XSD file using the built in wizard that looks like this - <?xml ve
-
Hello, I have made a VI that when a button is pressed, a serial command is sent out via COM PORT 3. The VI then awaits serial information back via COM PORT 3. The VI is communicating with a PICAXE 08M. I've got the VI acceptiong a string, then using
-
I'm spooling a file to Excel and all is working except for the ID field. It is a 10 character field of numbers that loses the leading zeroes. So 0000138750 appears in Excel as 138750. Is there a column format that I can use that will translate correc